From: Rostislav Lisovy <lisovy@gmail.com>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] [RFC 2/4] ath9k: Allow 5/10 MHz channel setting (for OCB)
Date: Mon, 17 Feb 2014 14:22:52 +0100 [thread overview]
Message-ID: <1392643374-3545-3-git-send-email-lisovy@gmail.com> (raw)
In-Reply-To: <1392643374-3545-1-git-send-email-lisovy@gmail.com>
Signed-off-by: Rostislav Lisovy <lisovy@gmail.com>
---
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 5 +++++
drivers/net/wireless/ath/ath9k/hw.h | 3 ++-
drivers/net/wireless/ath/ath9k/init.c | 20 ++++++++++++++++++++
drivers/net/wireless/ath/ath9k/recv.c | 6 ++++++
drivers/net/wireless/ath/ath9k/xmit.c | 6 ++++++
drivers/net/wireless/ath/regd.c | 9 ++++++---
drivers/net/wireless/rtlwifi/regd.c | 9 ++++++---
7 files changed, 51 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index c028df7..348864e 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -1095,6 +1095,11 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
rx_status->signal = rxbuf->rxstatus.rs_rssi + ATH_DEFAULT_NOISE_FLOOR;
rx_status->antenna = rxbuf->rxstatus.rs_antenna;
rx_status->flag |= RX_FLAG_MACTIME_END;
+ if (IS_CHAN_HALF_RATE(priv->ah->curchan))
+ rx_status->flag |= RX_FLAG_10MHZ;
+ else if (IS_CHAN_QUARTER_RATE(priv->ah->curchan))
+ rx_status->flag |= RX_FLAG_5MHZ;
+
return true;
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index a2c9a5d..88e44c7 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -69,7 +69,7 @@
#define ATH9K_RSSI_BAD -128
-#define ATH9K_NUM_CHANNELS 38
+#define ATH9K_NUM_CHANNELS 54
/* Register read/write primitives */
#define REG_WRITE(_ah, _reg, _val) \
@@ -422,6 +422,7 @@ struct ath9k_channel {
#define IS_CHAN_HALF_RATE(_c) (!!((_c)->channelFlags & CHANNEL_HALF))
#define IS_CHAN_QUARTER_RATE(_c) (!!((_c)->channelFlags & CHANNEL_QUARTER))
+
#define IS_CHAN_A_FAST_CLOCK(_ah, _c) \
(IS_CHAN_5GHZ(_c) && ((_ah)->caps.hw_caps & ATH9K_HW_CAP_FASTCLOCK))
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 710192e..7bad46f 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -128,6 +128,26 @@ static const struct ieee80211_channel ath9k_5ghz_chantable[] = {
CHAN5G(5785, 35), /* Channel 157 */
CHAN5G(5805, 36), /* Channel 161 */
CHAN5G(5825, 37), /* Channel 165 */
+
+ CHAN5G(5850, 38), /* Channel 170 */
+ /* ITA-G5B */
+ CHAN5G(5855, 39), /* Channel 171 */
+ CHAN5G(5860, 40), /* Channel 172 */
+ CHAN5G(5865, 41), /* Channel 173 */
+ CHAN5G(5870, 42), /* Channel 174 */
+ /* ITS-G5A */
+ CHAN5G(5875, 43), /* Channel 175 */
+ CHAN5G(5880, 44), /* Channel 176 */
+ CHAN5G(5885, 45), /* Channel 177 */
+ CHAN5G(5890, 46), /* Channel 178 */
+ CHAN5G(5895, 47), /* Channel 179 */
+ CHAN5G(5900, 48), /* Channel 180 */
+ CHAN5G(5905, 49), /* Channel 181 */
+ /* ITS-G5D */
+ CHAN5G(5910, 50), /* Channel 182 */
+ CHAN5G(5915, 51), /* Channel 183 */
+ CHAN5G(5920, 52), /* Channel 184 */
+ CHAN5G(5925, 53), /* Channel 185 */
};
/* Atheros hardware rate code addition for short premble */
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 95ddca5..ea8d15d 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -1435,6 +1435,12 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
retval = ath9k_rx_skb_preprocess(sc, hdr_skb, &rs, rxs,
&decrypt_error, tsf);
+
+ if (IS_CHAN_HALF_RATE(ah->curchan))
+ rxs->flag |= RX_FLAG_10MHZ;
+ else if (IS_CHAN_QUARTER_RATE(ah->curchan))
+ rxs->flag |= RX_FLAG_5MHZ;
+
if (retval)
goto requeue_drop_frag;
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index b5a19e0..7770f4a 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2335,6 +2335,12 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
/* Frame was ACKed */
tx_info->flags |= IEEE80211_TX_STAT_ACK;
+ if (IS_CHAN_HALF_RATE(sc->sc_ah->curchan))
+ tx_info->flags |= IEEE80211_TX_CTL_10MHZ;
+ else if (IS_CHAN_QUARTER_RATE(sc->sc_ah->curchan))
+ tx_info->flags |= IEEE80211_TX_CTL_5MHZ;
+
+
padpos = ieee80211_hdrlen(hdr->frame_control);
padsize = padpos & 3;
if (padsize && skb->len>padpos+padsize) {
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index 1217c52..9a7b934 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -195,6 +195,7 @@ ath_reg_apply_beaconing_flags(struct wiphy *wiphy,
const struct ieee80211_reg_rule *reg_rule;
struct ieee80211_channel *ch;
unsigned int i;
+ u32 bandwidth = 0;
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
@@ -212,7 +213,8 @@ ath_reg_apply_beaconing_flags(struct wiphy *wiphy,
continue;
if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) {
- reg_rule = freq_reg_info(wiphy, ch->center_freq);
+ reg_rule = freq_reg_info(wiphy, ch->center_freq,
+ bandwidth);
if (IS_ERR(reg_rule))
continue;
/*
@@ -249,6 +251,7 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy,
struct ieee80211_supported_band *sband;
struct ieee80211_channel *ch;
const struct ieee80211_reg_rule *reg_rule;
+ u32 bandwidth = 0;
sband = wiphy->bands[IEEE80211_BAND_2GHZ];
if (!sband)
@@ -276,7 +279,7 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy,
*/
ch = &sband->channels[11]; /* CH 12 */
- reg_rule = freq_reg_info(wiphy, ch->center_freq);
+ reg_rule = freq_reg_info(wiphy, ch->center_freq, bandwidth);
if (!IS_ERR(reg_rule)) {
if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
@@ -284,7 +287,7 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy,
}
ch = &sband->channels[12]; /* CH 13 */
- reg_rule = freq_reg_info(wiphy, ch->center_freq);
+ reg_rule = freq_reg_info(wiphy, ch->center_freq, bandwidth);
if (!IS_ERR(reg_rule)) {
if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
diff --git a/drivers/net/wireless/rtlwifi/regd.c b/drivers/net/wireless/rtlwifi/regd.c
index d7d0d49..89836b0 100644
--- a/drivers/net/wireless/rtlwifi/regd.c
+++ b/drivers/net/wireless/rtlwifi/regd.c
@@ -158,6 +158,7 @@ static void _rtl_reg_apply_beaconing_flags(struct wiphy *wiphy,
const struct ieee80211_reg_rule *reg_rule;
struct ieee80211_channel *ch;
unsigned int i;
+ u32 bandwidth = 0;
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
@@ -172,7 +173,8 @@ static void _rtl_reg_apply_beaconing_flags(struct wiphy *wiphy,
(ch->flags & IEEE80211_CHAN_RADAR))
continue;
if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) {
- reg_rule = freq_reg_info(wiphy, ch->center_freq);
+ reg_rule = freq_reg_info(wiphy, ch->center_freq,
+ bandwidth);
if (IS_ERR(reg_rule))
continue;
@@ -208,6 +210,7 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy,
struct ieee80211_supported_band *sband;
struct ieee80211_channel *ch;
const struct ieee80211_reg_rule *reg_rule;
+ u32 bandwidth = 0;
if (!wiphy->bands[IEEE80211_BAND_2GHZ])
return;
@@ -235,7 +238,7 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy,
*/
ch = &sband->channels[11]; /* CH 12 */
- reg_rule = freq_reg_info(wiphy, ch->center_freq);
+ reg_rule = freq_reg_info(wiphy, ch->center_freq, bandwidth);
if (!IS_ERR(reg_rule)) {
if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
@@ -243,7 +246,7 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy,
}
ch = &sband->channels[12]; /* CH 13 */
- reg_rule = freq_reg_info(wiphy, ch->center_freq);
+ reg_rule = freq_reg_info(wiphy, ch->center_freq, bandwidth);
if (!IS_ERR(reg_rule)) {
if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
--
1.8.5.1
WARNING: multiple messages have this Message-ID (diff)
From: Rostislav Lisovy <lisovy@gmail.com>
To: Johannes Berg <johannes@sipsolutions.net>,
"John W. Linville" <linville@tuxdriver.com>,
linux-wireless@vger.kernel.org, ath9k-devel@lists.ath9k.org
Cc: Michal Sojka <sojkam1@fel.cvut.cz>,
s.sander@nordsys.de, jan-niklas.meier@volkswagen.de,
Rostislav Lisovy <lisovy@gmail.com>
Subject: [RFC 2/4] ath9k: Allow 5/10 MHz channel setting (for OCB)
Date: Mon, 17 Feb 2014 14:22:52 +0100 [thread overview]
Message-ID: <1392643374-3545-3-git-send-email-lisovy@gmail.com> (raw)
In-Reply-To: <1392643374-3545-1-git-send-email-lisovy@gmail.com>
Signed-off-by: Rostislav Lisovy <lisovy@gmail.com>
---
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 5 +++++
drivers/net/wireless/ath/ath9k/hw.h | 3 ++-
drivers/net/wireless/ath/ath9k/init.c | 20 ++++++++++++++++++++
drivers/net/wireless/ath/ath9k/recv.c | 6 ++++++
drivers/net/wireless/ath/ath9k/xmit.c | 6 ++++++
drivers/net/wireless/ath/regd.c | 9 ++++++---
drivers/net/wireless/rtlwifi/regd.c | 9 ++++++---
7 files changed, 51 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index c028df7..348864e 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -1095,6 +1095,11 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
rx_status->signal = rxbuf->rxstatus.rs_rssi + ATH_DEFAULT_NOISE_FLOOR;
rx_status->antenna = rxbuf->rxstatus.rs_antenna;
rx_status->flag |= RX_FLAG_MACTIME_END;
+ if (IS_CHAN_HALF_RATE(priv->ah->curchan))
+ rx_status->flag |= RX_FLAG_10MHZ;
+ else if (IS_CHAN_QUARTER_RATE(priv->ah->curchan))
+ rx_status->flag |= RX_FLAG_5MHZ;
+
return true;
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index a2c9a5d..88e44c7 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -69,7 +69,7 @@
#define ATH9K_RSSI_BAD -128
-#define ATH9K_NUM_CHANNELS 38
+#define ATH9K_NUM_CHANNELS 54
/* Register read/write primitives */
#define REG_WRITE(_ah, _reg, _val) \
@@ -422,6 +422,7 @@ struct ath9k_channel {
#define IS_CHAN_HALF_RATE(_c) (!!((_c)->channelFlags & CHANNEL_HALF))
#define IS_CHAN_QUARTER_RATE(_c) (!!((_c)->channelFlags & CHANNEL_QUARTER))
+
#define IS_CHAN_A_FAST_CLOCK(_ah, _c) \
(IS_CHAN_5GHZ(_c) && ((_ah)->caps.hw_caps & ATH9K_HW_CAP_FASTCLOCK))
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 710192e..7bad46f 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -128,6 +128,26 @@ static const struct ieee80211_channel ath9k_5ghz_chantable[] = {
CHAN5G(5785, 35), /* Channel 157 */
CHAN5G(5805, 36), /* Channel 161 */
CHAN5G(5825, 37), /* Channel 165 */
+
+ CHAN5G(5850, 38), /* Channel 170 */
+ /* ITA-G5B */
+ CHAN5G(5855, 39), /* Channel 171 */
+ CHAN5G(5860, 40), /* Channel 172 */
+ CHAN5G(5865, 41), /* Channel 173 */
+ CHAN5G(5870, 42), /* Channel 174 */
+ /* ITS-G5A */
+ CHAN5G(5875, 43), /* Channel 175 */
+ CHAN5G(5880, 44), /* Channel 176 */
+ CHAN5G(5885, 45), /* Channel 177 */
+ CHAN5G(5890, 46), /* Channel 178 */
+ CHAN5G(5895, 47), /* Channel 179 */
+ CHAN5G(5900, 48), /* Channel 180 */
+ CHAN5G(5905, 49), /* Channel 181 */
+ /* ITS-G5D */
+ CHAN5G(5910, 50), /* Channel 182 */
+ CHAN5G(5915, 51), /* Channel 183 */
+ CHAN5G(5920, 52), /* Channel 184 */
+ CHAN5G(5925, 53), /* Channel 185 */
};
/* Atheros hardware rate code addition for short premble */
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 95ddca5..ea8d15d 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -1435,6 +1435,12 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
retval = ath9k_rx_skb_preprocess(sc, hdr_skb, &rs, rxs,
&decrypt_error, tsf);
+
+ if (IS_CHAN_HALF_RATE(ah->curchan))
+ rxs->flag |= RX_FLAG_10MHZ;
+ else if (IS_CHAN_QUARTER_RATE(ah->curchan))
+ rxs->flag |= RX_FLAG_5MHZ;
+
if (retval)
goto requeue_drop_frag;
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index b5a19e0..7770f4a 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2335,6 +2335,12 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
/* Frame was ACKed */
tx_info->flags |= IEEE80211_TX_STAT_ACK;
+ if (IS_CHAN_HALF_RATE(sc->sc_ah->curchan))
+ tx_info->flags |= IEEE80211_TX_CTL_10MHZ;
+ else if (IS_CHAN_QUARTER_RATE(sc->sc_ah->curchan))
+ tx_info->flags |= IEEE80211_TX_CTL_5MHZ;
+
+
padpos = ieee80211_hdrlen(hdr->frame_control);
padsize = padpos & 3;
if (padsize && skb->len>padpos+padsize) {
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index 1217c52..9a7b934 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -195,6 +195,7 @@ ath_reg_apply_beaconing_flags(struct wiphy *wiphy,
const struct ieee80211_reg_rule *reg_rule;
struct ieee80211_channel *ch;
unsigned int i;
+ u32 bandwidth = 0;
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
@@ -212,7 +213,8 @@ ath_reg_apply_beaconing_flags(struct wiphy *wiphy,
continue;
if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) {
- reg_rule = freq_reg_info(wiphy, ch->center_freq);
+ reg_rule = freq_reg_info(wiphy, ch->center_freq,
+ bandwidth);
if (IS_ERR(reg_rule))
continue;
/*
@@ -249,6 +251,7 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy,
struct ieee80211_supported_band *sband;
struct ieee80211_channel *ch;
const struct ieee80211_reg_rule *reg_rule;
+ u32 bandwidth = 0;
sband = wiphy->bands[IEEE80211_BAND_2GHZ];
if (!sband)
@@ -276,7 +279,7 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy,
*/
ch = &sband->channels[11]; /* CH 12 */
- reg_rule = freq_reg_info(wiphy, ch->center_freq);
+ reg_rule = freq_reg_info(wiphy, ch->center_freq, bandwidth);
if (!IS_ERR(reg_rule)) {
if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
@@ -284,7 +287,7 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy,
}
ch = &sband->channels[12]; /* CH 13 */
- reg_rule = freq_reg_info(wiphy, ch->center_freq);
+ reg_rule = freq_reg_info(wiphy, ch->center_freq, bandwidth);
if (!IS_ERR(reg_rule)) {
if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
diff --git a/drivers/net/wireless/rtlwifi/regd.c b/drivers/net/wireless/rtlwifi/regd.c
index d7d0d49..89836b0 100644
--- a/drivers/net/wireless/rtlwifi/regd.c
+++ b/drivers/net/wireless/rtlwifi/regd.c
@@ -158,6 +158,7 @@ static void _rtl_reg_apply_beaconing_flags(struct wiphy *wiphy,
const struct ieee80211_reg_rule *reg_rule;
struct ieee80211_channel *ch;
unsigned int i;
+ u32 bandwidth = 0;
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
@@ -172,7 +173,8 @@ static void _rtl_reg_apply_beaconing_flags(struct wiphy *wiphy,
(ch->flags & IEEE80211_CHAN_RADAR))
continue;
if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) {
- reg_rule = freq_reg_info(wiphy, ch->center_freq);
+ reg_rule = freq_reg_info(wiphy, ch->center_freq,
+ bandwidth);
if (IS_ERR(reg_rule))
continue;
@@ -208,6 +210,7 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy,
struct ieee80211_supported_band *sband;
struct ieee80211_channel *ch;
const struct ieee80211_reg_rule *reg_rule;
+ u32 bandwidth = 0;
if (!wiphy->bands[IEEE80211_BAND_2GHZ])
return;
@@ -235,7 +238,7 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy,
*/
ch = &sband->channels[11]; /* CH 12 */
- reg_rule = freq_reg_info(wiphy, ch->center_freq);
+ reg_rule = freq_reg_info(wiphy, ch->center_freq, bandwidth);
if (!IS_ERR(reg_rule)) {
if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
@@ -243,7 +246,7 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy,
}
ch = &sband->channels[12]; /* CH 13 */
- reg_rule = freq_reg_info(wiphy, ch->center_freq);
+ reg_rule = freq_reg_info(wiphy, ch->center_freq, bandwidth);
if (!IS_ERR(reg_rule)) {
if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
--
1.8.5.1
next prev parent reply other threads:[~2014-02-17 13:22 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-17 13:22 [ath9k-devel] [RFC 0/4] mac80211 & ath9k: ITS-G5 (IEEE 802.11p) basic support Rostislav Lisovy
2014-02-17 13:22 ` Rostislav Lisovy
2014-02-17 13:22 ` [ath9k-devel] [RFC 1/4] mac80211: Allow 5/10 MHz channel setting (for OCB) Rostislav Lisovy
2014-02-17 13:22 ` Rostislav Lisovy
2014-02-17 13:49 ` [ath9k-devel] " Johannes Berg
2014-02-17 13:49 ` Johannes Berg
2014-02-17 15:49 ` [ath9k-devel] " Rostislav Lisovy
2014-02-17 15:49 ` Rostislav Lisovy
2014-02-17 16:38 ` [ath9k-devel] " Johannes Berg
2014-02-17 16:38 ` Johannes Berg
2014-02-17 13:22 ` Rostislav Lisovy [this message]
2014-02-17 13:22 ` [RFC 2/4] ath9k: " Rostislav Lisovy
2014-02-17 13:22 ` [ath9k-devel] [RFC 3/4] mac80211: Add OCB (IEEE 802.11p) mode Rostislav Lisovy
2014-02-17 13:22 ` Rostislav Lisovy
2014-02-17 13:50 ` [ath9k-devel] " Johannes Berg
2014-02-17 13:50 ` Johannes Berg
2014-02-17 13:22 ` [ath9k-devel] [RFC 4/4] ath9k: " Rostislav Lisovy
2014-02-17 13:22 ` Rostislav Lisovy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392643374-3545-3-git-send-email-lisovy@gmail.com \
--to=lisovy@gmail.com \
--cc=ath9k-devel@lists.ath9k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.