All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Eric Bénard" <eric@eukrea.com>
To: barebox@lists.infradead.org
Subject: [PATCH v2 5/7] ARM: mx53-qsrb: enable USB OTG in host mode
Date: Fri,  7 Mar 2014 11:40:01 +0100	[thread overview]
Message-ID: <1394188803-13456-5-git-send-email-eric@eukrea.com> (raw)
In-Reply-To: <1394188803-13456-1-git-send-email-eric@eukrea.com>

tested on i.MX53 START-R :
barebox@Freescale i.MX53 Quick Start-R Board:/ usb -f
USB: scanning bus for devices...
Using index 0 for the new disk
Bus 001 Device 002: ID 0951:1654 DT R500
Bus 001 Device 001: ID 0000:0000 EHCI Host Controller
Bus 002 Device 003: ID 0000:0000 EHCI Host Controller
3 USB Device(s) found

Signed-off-by: Eric Bénard <eric@eukrea.com>
---
v2 : Remove the dr_mode = "host" line

 arch/arm/dts/imx53-qsb-common.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/imx53-qsb-common.dtsi b/arch/arm/dts/imx53-qsb-common.dtsi
index 4ae1f49..3a9d55e 100644
--- a/arch/arm/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/dts/imx53-qsb-common.dtsi
@@ -223,6 +223,7 @@
 };
 
 &usbotg {
-       status = "okay";
+	phy_type = "utmi";
+	status = "okay";
 };
 
-- 
1.8.3.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2014-03-07 10:40 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-08 14:16 [PATCH 1/7] sata-imx: i.MX53, use the internal 120MHz clock by default Eric Bénard
2014-02-08 14:16 ` [PATCH 2/7] ARM: i.MX53: Add sata to devicetree Eric Bénard
2014-02-08 14:26   ` Alexander Shiyan
2014-02-10  8:33     ` Sascha Hauer
2014-02-10  8:39       ` Eric Bénard
2014-02-10  8:40       ` Alexander Shiyan
2014-02-10  8:48         ` Eric Bénard
2014-02-10  8:52           ` Sascha Hauer
2014-02-10  8:54             ` Eric Bénard
2014-02-10  9:03               ` Sascha Hauer
2014-02-10  9:11                 ` Sascha Hauer
2014-03-07 10:39                   ` [PATCH v2 1/7] sata-imx: i.MX53, use the internal 120MHz clock by default Eric Bénard
2014-03-07 10:39                     ` [PATCH v2 2/7] ARM: i.MX53: Add sata to devicetree Eric Bénard
2014-03-10  7:08                       ` Sascha Hauer
2014-03-07 10:39                     ` [PATCH v2 3/7] ARM: mx53-qsrb: fix USB Eric Bénard
2014-03-07 10:40                     ` [PATCH v2 4/7] ARM: mx53-qsrb: enable USB host Eric Bénard
2014-03-07 10:40                     ` Eric Bénard [this message]
2014-03-07 10:40                     ` [PATCH v2 6/7] ARM: mx53-qsrb: enable sata Eric Bénard
2014-03-07 10:40                     ` [PATCH v2 7/7] ARM: mx53-qsb: update defconfig Eric Bénard
2014-03-10  7:09                     ` [PATCH v2 1/7] sata-imx: i.MX53, use the internal 120MHz clock by default Sascha Hauer
2014-03-10  7:51                       ` Eric Bénard
2014-03-11  5:32                         ` Sascha Hauer
2014-02-10  9:07     ` [PATCH 2/7] ARM: i.MX53: Add sata to devicetree Sascha Hauer
2014-02-10  9:15       ` Sascha Hauer
2014-02-10  9:22         ` Alexander Shiyan
2014-02-08 14:16 ` [PATCH 3/7] ARM: mx53-qsrb: fix USB Eric Bénard
2014-02-08 14:16 ` [PATCH 4/7] ARM: mx53-qsrb: enable USB host Eric Bénard
2014-02-08 14:16 ` [PATCH 5/7] ARM: mx53-qsrb: enable USB OTG in host mode Eric Bénard
2014-02-10  8:16   ` Sascha Hauer
2014-02-10  8:28     ` Eric Bénard
2014-02-10  8:31       ` Sascha Hauer
2014-02-10  8:37         ` Eric Bénard
2014-02-08 14:16 ` [PATCH 6/7] ARM: mx53-qsrb: enable sata Eric Bénard
2014-02-08 14:16 ` [PATCH 7/7] ARM: mx53-qsb: update defconfig Eric Bénard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1394188803-13456-5-git-send-email-eric@eukrea.com \
    --to=eric@eukrea.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.