All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Mack <zonque@gmail.com>
To: broonie@kernel.org
Cc: alsa-devel@alsa-project.org, Daniel Mack <zonque@gmail.com>
Subject: [PATCH 1/3 v2] ASoC: ak5386: add regulator consumer support
Date: Thu, 27 Mar 2014 21:42:14 +0100	[thread overview]
Message-ID: <1395952936-10670-1-git-send-email-zonque@gmail.com> (raw)

The chip has two power supplies, VA and VDD. Enable them both as long
as the codec is in use.

Signed-off-by: Daniel Mack <zonque@gmail.com>
---
 sound/soc/codecs/ak5386.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/sound/soc/codecs/ak5386.c b/sound/soc/codecs/ak5386.c
index 72e953b..a30be5c 100644
--- a/sound/soc/codecs/ak5386.c
+++ b/sound/soc/codecs/ak5386.c
@@ -14,12 +14,18 @@
 #include <linux/of.h>
 #include <linux/of_gpio.h>
 #include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
 #include <sound/soc.h>
 #include <sound/pcm.h>
 #include <sound/initval.h>
 
+static const char const *supply_names[] = {
+	"va", "vd"
+};
+
 struct ak5386_priv {
 	int reset_gpio;
+	struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)];
 };
 
 static const struct snd_soc_dapm_widget ak5386_dapm_widgets[] = {
@@ -32,7 +38,42 @@ static const struct snd_soc_dapm_route ak5386_dapm_routes[] = {
 	{ "Capture", NULL, "AINR" },
 };
 
+static int ak5386_soc_probe(struct snd_soc_codec *codec)
+{
+	struct ak5386_priv *priv = snd_soc_codec_get_drvdata(codec);
+	return regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
+}
+
+static int ak5386_soc_remove(struct snd_soc_codec *codec)
+{
+	struct ak5386_priv *priv = snd_soc_codec_get_drvdata(codec);
+	regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ak5386_soc_suspend(struct snd_soc_codec *codec)
+{
+	struct ak5386_priv *priv = snd_soc_codec_get_drvdata(codec);
+	regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
+	return 0;
+}
+
+static int ak5386_soc_resume(struct snd_soc_codec *codec)
+{
+	struct ak5386_priv *priv = snd_soc_codec_get_drvdata(codec);
+	return regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
+}
+#else
+#define ak5386_soc_suspend	NULL
+#define ak5386_soc_resume	NULL
+#endif /* CONFIG_PM */
+
 static struct snd_soc_codec_driver soc_codec_ak5386 = {
+	.probe = ak5386_soc_probe,
+	.remove = ak5386_soc_remove,
+	.suspend = ak5386_soc_suspend,
+	.resume = ak5386_soc_resume,
 	.dapm_widgets = ak5386_dapm_widgets,
 	.num_dapm_widgets = ARRAY_SIZE(ak5386_dapm_widgets),
 	.dapm_routes = ak5386_dapm_routes,
@@ -122,6 +163,7 @@ static int ak5386_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct ak5386_priv *priv;
+	int ret, i;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -130,6 +172,14 @@ static int ak5386_probe(struct platform_device *pdev)
 	priv->reset_gpio = -EINVAL;
 	dev_set_drvdata(dev, priv);
 
+	for (i = 0; i < ARRAY_SIZE(supply_names); i++)
+		priv->supplies[i].supply = supply_names[i];
+
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(priv->supplies),
+				      priv->supplies);
+	if (ret < 0)
+		return ret;
+
 	if (of_match_device(of_match_ptr(ak5386_dt_ids), dev))
 		priv->reset_gpio = of_get_named_gpio(dev->of_node,
 						      "reset-gpio", 0);
-- 
1.8.5.3

             reply	other threads:[~2014-03-27 20:42 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-27 20:42 Daniel Mack [this message]
2014-03-27 20:42 ` [PATCH 2/3 v2] ASoC: ak4104: add regulator consumer support Daniel Mack
2014-03-28 11:23   ` Mark Brown
2014-03-28 11:27     ` Daniel Mack
2014-03-28 11:53       ` Mark Brown
2014-03-27 20:42 ` [PATCH 3/3 v2] ASoC: tas5086: " Daniel Mack
2014-03-28 11:35   ` Mark Brown
2014-03-28 11:40     ` Daniel Mack
2014-03-28 11:52       ` Mark Brown
2014-03-28 11:21 ` [PATCH 1/3 v2] ASoC: ak5386: " Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1395952936-10670-1-git-send-email-zonque@gmail.com \
    --to=zonque@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.