[U-Boot] [PATCH 2/8] nitrogen6x: use common board_video_skip

["Eric Bénard" <eric@eukrea.com>]

Signed-off-by: Eric B?nard <eric@eukrea.com>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
---
 board/boundary/nitrogen6x/nitrogen6x.c | 61 ++--------------------------------
 include/configs/nitrogen6x.h           |  1 +
 2 files changed, 4 insertions(+), 58 deletions(-)

diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index d9c05b0..1d96db1 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -19,13 +19,12 @@
 #include <asm/imx-common/mxc_i2c.h>
 #include <asm/imx-common/sata.h>
 #include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/video.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <micrel.h>
 #include <miiphy.h>
 #include <netdev.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/arch/mxc_hdmi.h>
 #include <i2c.h>
@@ -446,16 +445,6 @@ static iomux_v3_cfg_t const rgb_pads[] = {
 	MX6_PAD_DISP0_DAT23__IPU1_DISP0_DATA23,
 };
 
-struct display_info_t {
-	int	bus;
-	int	addr;
-	int	pixfmt;
-	int	(*detect)(struct display_info_t const *dev);
-	void	(*enable)(struct display_info_t const *dev);
-	struct	fb_videomode mode;
-};
-
-
 static int detect_hdmi(struct display_info_t const *dev)
 {
 	struct hdmi_regs *hdmi	= (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
@@ -492,7 +481,7 @@ static void enable_rgb(struct display_info_t const *dev)
 	gpio_direction_output(RGB_BACKLIGHT_GP, 1);
 }
 
-static struct display_info_t const displays[] = {{
+struct display_info_t const displays[] = {{
 	.bus	= -1,
 	.addr	= 0,
 	.pixfmt	= IPU_PIX_FMT_RGB24,
@@ -573,51 +562,7 @@ static struct display_info_t const displays[] = {{
 		.sync           = 0,
 		.vmode          = FB_VMODE_NONINTERLACED
 } } };
-
-int board_video_skip(void)
-{
-	int i;
-	int ret;
-	char const *panel = getenv("panel");
-	if (!panel) {
-		for (i = 0; i < ARRAY_SIZE(displays); i++) {
-			struct display_info_t const *dev = displays+i;
-			if (dev->detect(dev)) {
-				panel = dev->mode.name;
-				printf("auto-detected panel %s\n", panel);
-				break;
-			}
-		}
-		if (!panel) {
-			panel = displays[0].mode.name;
-			printf("No panel detected: default to %s\n", panel);
-			i = 0;
-		}
-	} else {
-		for (i = 0; i < ARRAY_SIZE(displays); i++) {
-			if (!strcmp(panel, displays[i].mode.name))
-				break;
-		}
-	}
-	if (i < ARRAY_SIZE(displays)) {
-		ret = ipuv3_fb_init(&displays[i].mode, 0,
-				    displays[i].pixfmt);
-		if (!ret) {
-			displays[i].enable(displays+i);
-			printf("Display: %s (%ux%u)\n",
-			       displays[i].mode.name,
-			       displays[i].mode.xres,
-			       displays[i].mode.yres);
-		} else {
-			printf("LCD %s cannot be configured: %d\n",
-			       displays[i].mode.name, ret);
-		}
-	} else {
-		printf("unsupported panel %s\n", panel);
-		ret = -EINVAL;
-	}
-	return (0 != ret);
-}
+size_t display_number = ARRAY_SIZE(displays);
 
 static void setup_display(void)
 {
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index f2db8c5..e5f1e97 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -141,6 +141,7 @@
 #define CONFIG_CMD_HDMIDETECT
 #define CONFIG_CONSOLE_MUX
 #define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-- 
1.9.0