From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/8] imx-common: add board_video_skip
Date: Fri, 04 Apr 2014 12:05:06 +0200 [thread overview]
Message-ID: <533E83D2.3040000@denx.de> (raw)
In-Reply-To: <1396468670-29774-1-git-send-email-eric@eukrea.com>
Hi Eric,
On 02/04/2014 21:57, Eric B?nard wrote:
> this function is shared by several board and thus can be factorized
>
> Signed-off-by: Eric B?nard <eric@eukrea.com>
> ---
> arch/arm/imx-common/Makefile | 1 +
> arch/arm/imx-common/video.c | 55 +++++++++++++++++++++++++++++++++
> arch/arm/include/asm/imx-common/video.h | 20 ++++++++++++
> 3 files changed, 76 insertions(+)
> create mode 100644 arch/arm/imx-common/video.c
> create mode 100644 arch/arm/include/asm/imx-common/video.h
>
> diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
> index 16809fe..2a7fc42 100644
> --- a/arch/arm/imx-common/Makefile
> +++ b/arch/arm/imx-common/Makefile
> @@ -19,6 +19,7 @@ obj-y += misc.o
> endif
> ifeq ($(SOC),$(filter $(SOC),mx6))
> obj-$(CONFIG_CMD_SATA) += sata.o
> +obj-$(CONFIG_IMX_VIDEO_SKIP) += video.o
> endif
> obj-$(CONFIG_CMD_BMODE) += cmd_bmode.o
> obj-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o
> diff --git a/arch/arm/imx-common/video.c b/arch/arm/imx-common/video.c
> new file mode 100644
> index 0000000..8db5a84
> --- /dev/null
> +++ b/arch/arm/imx-common/video.c
> @@ -0,0 +1,55 @@
> +/*
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/errno.h>
> +#include <asm/imx-common/video.h>
> +
> +extern struct display_info_t const displays[];
> +extern size_t display_number;
> +
> +int board_video_skip(void)
> +{
> + int i;
> + int ret;
> + char const *panel = getenv("panel");
> + if (!panel) {
> + for (i = 0; i < display_number; i++) {
> + struct display_info_t const *dev = displays+i;
> + if (dev->detect && dev->detect(dev)) {
> + panel = dev->mode.name;
> + printf("auto-detected panel %s\n", panel);
> + break;
> + }
> + }
> + if (!panel) {
> + panel = displays[0].mode.name;
> + printf("No panel detected: default to %s\n", panel);
> + i = 0;
> + }
> + } else {
> + for (i = 0; i < display_number; i++) {
> + if (!strcmp(panel, displays[i].mode.name))
> + break;
> + }
> + }
> + if (i < display_number) {
> + ret = ipuv3_fb_init(&displays[i].mode, 0,
> + displays[i].pixfmt);
> + if (!ret) {
> + displays[i].enable(displays+i);
> + printf("Display: %s (%ux%u)\n",
> + displays[i].mode.name,
> + displays[i].mode.xres,
> + displays[i].mode.yres);
> + } else
> + printf("LCD %s cannot be configured: %d\n",
> + displays[i].mode.name, ret);
> + } else {
> + printf("unsupported panel %s\n", panel);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> diff --git a/arch/arm/include/asm/imx-common/video.h b/arch/arm/include/asm/imx-common/video.h
> new file mode 100644
> index 0000000..e0c4ef4
> --- /dev/null
> +++ b/arch/arm/include/asm/imx-common/video.h
> @@ -0,0 +1,20 @@
> +/*
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __IMX_VIDEO_H_
> +#define __IMX_VIDEO_H_
> +
> +#include <linux/fb.h>
> +#include <ipu_pixfmt.h>
> +
> +struct display_info_t {
> + int bus;
> + int addr;
> + int pixfmt;
> + int (*detect)(struct display_info_t const *dev);
> + void (*enable)(struct display_info_t const *dev);
> + struct fb_videomode mode;
> +};
> +
> +#endif
>
Nice clean up, thanks for this !
Acked-by: Stefano Babic <sbabic@denx.de>
Regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2014-04-04 10:05 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-02 19:57 [U-Boot] [PATCH 1/8] imx-common: add board_video_skip Eric Bénard
2014-04-02 19:57 ` [U-Boot] [PATCH 2/8] nitrogen6x: use common board_video_skip Eric Bénard
2014-04-04 0:57 ` Eric Nelson
2014-04-02 19:57 ` [U-Boot] [PATCH 3/8] mx6sabresd: " Eric Bénard
2014-04-02 19:57 ` [U-Boot] [PATCH 4/8] RiOTboard and MarSBoard: add new boards support Eric Bénard
2014-04-04 10:12 ` Stefano Babic
2014-04-04 14:51 ` selsinork at gmail.com
2014-04-04 17:08 ` Eric Bénard
2014-04-02 19:57 ` [U-Boot] [PATCH 5/8] imx-common/video: add detect_hdmi Eric Bénard
2014-04-02 19:57 ` [U-Boot] [PATCH 6/8] nitrogen6x: use common detect_hdmi Eric Bénard
2014-04-04 0:47 ` Eric Nelson
2014-04-02 19:57 ` [U-Boot] [PATCH 7/8] mx6sabresd: " Eric Bénard
2014-04-02 19:57 ` [U-Boot] [PATCH 8/8] embest/mx6boards: " Eric Bénard
2014-04-04 10:05 ` Stefano Babic [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-04-02 19:57 [U-Boot] [PATCH 1/8] imx-common: add board_video_skip Eric Bénard
2014-04-04 0:56 ` Eric Nelson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=533E83D2.3040000@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.