All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Wu <lekensteyn@gmail.com>
To: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Bastien Traverse <bastien.traverse@gmail.com>,
	linux-kernel@vger.kernel.org, francis.moro@gmail.com,
	linux-pm@vger.kernel.org
Subject: Re: 3.12: ethernet controller missing after resuming from suspend to RAM
Date: Fri, 07 Feb 2014 00:27:03 +0100	[thread overview]
Message-ID: <1396879.yH0LySDBlU@al> (raw)
In-Reply-To: <55671594.HynIX0trOC@vostro.rjw.lan>

On Friday 07 February 2014 00:28:57 Rafael J. Wysocki wrote:
> On Thursday, February 06, 2014 10:08:25 PM Peter Wu wrote:
[..]
> > I also have an affected laptop where the network and MMC controller
> > vanishes on resume. The laptop is also from Clevo, but a different
> > model: Clevo B7130. I had no issues with my custom kernel
> > configuration (latest version that I tested was 3.13.1), but at least
> > the stock Arch kernels from 3.12.2 up to 3.12.6 and 3.13.1 are
> > affected by this issue.
[..]
> Well, I suspected that it would result from hotplug changes.
> 
> Please send me a dmesg log including the suspend-resume cycle after which
> the device is missing.

Please find it below. The only details I have stripped are UUID and
MAC addresses. Let me know if you need more information.

Thanks,
Peter

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.1-2-ARCH (nobody@mnt-chroots-arch-extra-x86_64-flo-64) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 31 10:48:18 CET 2014
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=[STRIPPED] rw quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b327bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b327c000-0x00000000b3281fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b3282000-0x00000000b33d5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b33d6000-0x00000000b340efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b340f000-0x00000000b345cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b345d000-0x00000000b345dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b345e000-0x00000000b34defff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b34df000-0x00000000b370efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b370f000-0x00000000b3716fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b3717000-0x00000000b371efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b371f000-0x00000000b376efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b376f000-0x00000000b379efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b379f000-0x00000000b37e0fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b37e1000-0x00000000b37fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000b37ff000-0x00000000b37fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b3800000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd80a000-0x00000000fd80afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000023bffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: CLEVO CO.                        B7130                           /B7130                           , BIOS 6.00 08/27/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x23c000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DBFFF uncachable
[    0.000000]   DC000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 disabled
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 100000000 mask F00000000 write-back
[    0.000000]   4 base 200000000 mask FC0000000 write-back
[    0.000000]   5 base 23C000000 mask FFC000000 uncachable
[    0.000000]   6 base 0B4000000 mask FFC000000 uncachable
[    0.000000]   7 base 0B8000000 mask FF8000000 uncachable
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xb4000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xb3800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f6900-0x000f690f] mapped at [ffff8800000f6900]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[    0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[    0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x23be00000-0x23bffffff]
[    0.000000]  [mem 0x23be00000-0x23bffffff] page 2M
[    0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x238000000-0x23bdfffff]
[    0.000000]  [mem 0x238000000-0x23bdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x237ffffff]
[    0.000000]  [mem 0x200000000-0x237ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xb327bfff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xb31fffff] page 2M
[    0.000000]  [mem 0xb3200000-0xb327bfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xb3282000-0xb33d5fff]
[    0.000000]  [mem 0xb3282000-0xb33d5fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xb340f000-0xb345cfff]
[    0.000000]  [mem 0xb340f000-0xb345cfff] page 4k
[    0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xb370f000-0xb3716fff]
[    0.000000]  [mem 0xb370f000-0xb3716fff] page 4k
[    0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xb371f000-0xb376efff]
[    0.000000]  [mem 0xb371f000-0xb376efff] page 4k
[    0.000000] init_memory_mapping: [mem 0xb379f000-0xb37e0fff]
[    0.000000]  [mem 0xb379f000-0xb37e0fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xb37ff000-0xb37fffff]
[    0.000000]  [mem 0xb37ff000-0xb37fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
[    0.000000]  [mem 0x100000000-0x1fbffffff] page 2M
[    0.000000] RAMDISK: [mem 0x37622000-0x37b08fff]
[    0.000000] ACPI: RSDP 00000000000f6840 000024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 00000000b37f5b01 00006C (v01 PTLTD  ? XSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 00000000b37e3000 0000F4 (v03 INTEL  CALPELLA 06040000 PTEC 00000001)
[    0.000000] ACPI: DSDT 00000000b37e4000 0090EB (v02 Intel  CALPELLA 06040000 INTL 20060912)
[    0.000000] ACPI: FACS 00000000b379bfc0 000040
[    0.000000] ACPI: HPET 00000000b37fedf0 000038 (v01 INTEL  CALPELLA 06040000 PTEC 00000001)
[    0.000000] ACPI: MCFG 00000000b37fee28 00003C (v01 INTEL  CALPELLA 06040000 PTEC 00000001)
[    0.000000] ACPI: APIC 00000000b37fee64 000084 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 00000000b37feee8 000028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SPCR 00000000b37fef10 000050 (v01 PTLTD  $UCRTBL$ 06040000 PTL  00000001)
[    0.000000] ACPI: ASF! 00000000b37fef60 0000A0 (v16   CETP     CETP 06040000 PTL  00000001)
[    0.000000] ACPI: SSDT 00000000b37ee000 0010DE (v01 NvdRef  NvdTabl 00001000 INTL 20050624)
[    0.000000] ACPI: SSDT 00000000b37e2000 0009F1 (v01  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023bffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x23bffffff]
[    0.000000]   NODE_DATA [mem 0x23bff4000-0x23bff8fff]
[    0.000000]  [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880233800000-ffff88023b5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x23bffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009bfff]
[    0.000000]   node   0: [mem 0x00100000-0xb327bfff]
[    0.000000]   node   0: [mem 0xb3282000-0xb33d5fff]
[    0.000000]   node   0: [mem 0xb340f000-0xb345cfff]
[    0.000000]   node   0: [mem 0xb370f000-0xb3716fff]
[    0.000000]   node   0: [mem 0xb371f000-0xb376efff]
[    0.000000]   node   0: [mem 0xb379f000-0xb37e0fff]
[    0.000000]   node   0: [mem 0xb37ff000-0xb37fffff]
[    0.000000]   node   0: [mem 0x100000000-0x1fbffffff]
[    0.000000]   node   0: [mem 0x200000000-0x23bffffff]
[    0.000000] On node 0 totalpages: 2012244
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11411 pages used for memmap
[    0.000000]   DMA32 zone: 730297 pages, LIFO batch:31
[    0.000000]   Normal zone: 20224 pages used for memmap
[    0.000000]   Normal zone: 1277952 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[    0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb327c000-0xb3281fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb33d6000-0xb340efff]
[    0.000000] PM: Registered nosave memory: [mem 0xb345d000-0xb345dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xb345e000-0xb34defff]
[    0.000000] PM: Registered nosave memory: [mem 0xb34df000-0xb370efff]
[    0.000000] PM: Registered nosave memory: [mem 0xb3717000-0xb371efff]
[    0.000000] PM: Registered nosave memory: [mem 0xb376f000-0xb379efff]
[    0.000000] PM: Registered nosave memory: [mem 0xb37e1000-0xb37fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xb3800000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfd809fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfd80a000-0xfd80afff]
[    0.000000] PM: Registered nosave memory: [mem 0xfd80b000-0xfeafefff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88023bc00000 s86336 r8192 d24256 u524288
[    0.000000] pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1980524
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=[STRIPPED] rw quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7836496K/8048976K available (5269K kernel code, 836K rwdata, 1672K rodata, 1124K init, 1324K bss, 212480K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] NR_IRQS:8448 nr_irqs:712 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33030144 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 2526.904 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5055.38 BogoMIPS (lpj=8423013)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000031] Security Framework initialized
[    0.000042] AppArmor: AppArmor disabled by boot time parameter
[    0.000043] Yama: becoming mindful.
[    0.000544] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.002412] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003253] Mount-cache hash table entries: 256
[    0.003436] Initializing cgroup subsys memory
[    0.003442] Initializing cgroup subsys devices
[    0.003444] Initializing cgroup subsys freezer
[    0.003446] Initializing cgroup subsys net_cls
[    0.003448] Initializing cgroup subsys blkio
[    0.003468] CPU: Physical Processor ID: 0
[    0.003469] CPU: Processor Core ID: 0
[    0.003474] mce: CPU supports 9 MCE banks
[    0.003483] CPU0: Thermal monitoring handled by SMI
[    0.003493] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[    0.003575] Freeing SMP alternatives memory: 20K (ffffffff819ec000 - ffffffff819f1000)
[    0.004526] ACPI: Core revision 20131115
[    0.008791] ACPI: All ACPI Tables successfully acquired
[    0.018551] ftrace: allocating 21048 entries in 83 pages
[    0.028871] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.061857] smpboot: CPU0: Intel(R) Core(TM) i5 CPU       M 460  @ 2.53GHz (fam: 06, model: 25, stepping: 05)
[    0.165735] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.165742] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.165744] ... version:                3
[    0.165745] ... bit width:              48
[    0.165746] ... generic registers:      4
[    0.165747] ... value mask:             0000ffffffffffff
[    0.165748] ... max period:             000000007fffffff
[    0.165748] ... fixed-purpose events:   3
[    0.165749] ... event mask:             000000070000000f
[    0.192463] x86: Booting SMP configuration:
[    0.203600] CPU1: Thermal monitoring handled by SMI
[    0.205785] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.223589] CPU2: Thermal monitoring handled by SMI
[    0.243581] CPU3: Thermal monitoring handled by SMI
[    0.192467] .... node  #0, CPUs:      #1 #2 #3
[    0.245706] x86: Booted up 1 node, 4 CPUs
[    0.245710] smpboot: Total of 4 processors activated (20223.53 BogoMIPS)
[    0.248233] devtmpfs: initialized
[    0.250806] PM: Registering ACPI NVS region [mem 0xb345e000-0xb34defff] (528384 bytes)
[    0.250816] PM: Registering ACPI NVS region [mem 0xb376f000-0xb379efff] (196608 bytes)
[    0.251699] RTC time: 16:10:25, date: 02/06/14
[    0.251737] NET: Registered protocol family 16
[    0.251831] cpuidle: using governor ladder
[    0.251832] cpuidle: using governor menu
[    0.251857] ACPI: bus type PCI registered
[    0.251859] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.251923] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.251926] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.275399] PCI: Using configuration type 1 for base access
[    0.275561] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.275562] mtrr: probably your BIOS does not setup all CPUs.
[    0.275563] mtrr: corrected configuration.
[    0.275952] bio: create slab <bio-0> at 0
[    0.276059] ACPI: Added _OSI(Module Device)
[    0.276061] ACPI: Added _OSI(Processor Device)
[    0.276062] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.276063] ACPI: Added _OSI(Processor Aggregator Device)
[    0.280968] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.281277] ACPI: SSDT 00000000b371a918 000432 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.281529] ACPI: Dynamic OEM Table Load:
[    0.281531] ACPI: SSDT           (null) 000432 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.281631] ACPI: SSDT 00000000b3718018 0008B0 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.281867] ACPI: Dynamic OEM Table Load:
[    0.281869] ACPI: SSDT           (null) 0008B0 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.302548] ACPI: SSDT 00000000b3719a98 000303 (v01  PmRef    ApIst 00003000 INTL 20050624)
[    0.302835] ACPI: Dynamic OEM Table Load:
[    0.302837] ACPI: SSDT           (null) 000303 (v01  PmRef    ApIst 00003000 INTL 20050624)
[    0.315765] ACPI: SSDT 00000000b3717d98 000119 (v01  PmRef    ApCst 00003000 INTL 20050624)
[    0.316024] ACPI: Dynamic OEM Table Load:
[    0.316026] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20050624)
[    0.329959] ACPI : EC: GPE storm detected(19 GPEs), transactions will use polling mode
[    0.812117] ACPI: Interpreter enabled
[    0.812131] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.812140] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.812160] ACPI: (supports S0 S3 S4 S5)
[    0.812162] ACPI: Using IOAPIC for interrupt routing
[    0.812193] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.812291] ACPI: No dock devices found.
[    0.902697] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.902702] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.902731] \_SB_.PCI0:_OSC invalid UUID
[    0.902732] _OSC request data:1 1f 0 
[    0.902735] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.903366] PCI host bridge to bus 0000:00
[    0.903369] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.903371] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.903372] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.903374] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.903375] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.903377] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.903378] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.903379] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff]
[    0.903387] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    0.903404] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.903476] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[    0.903506] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.903551] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.903577] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[    0.903587] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfd3fffff 64bit]
[    0.903593] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.903597] pci 0000:00:02.0: reg 0x20: [io  0x1800-0x1807]
[    0.903698] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    0.903724] pci 0000:00:16.0: reg 0x10: [mem 0xfd804000-0xfd80400f 64bit]
[    0.903813] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.903894] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.903912] pci 0000:00:1a.0: reg 0x10: [mem 0xfd806000-0xfd8063ff]
[    0.903990] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.904050] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.904085] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.904099] pci 0000:00:1b.0: reg 0x10: [mem 0xfd800000-0xfd803fff 64bit]
[    0.904156] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.904204] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.904232] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.904290] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.904337] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.904365] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    0.904423] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.904470] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.904499] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[    0.904556] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.904604] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.904641] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.904659] pci 0000:00:1d.0: reg 0x10: [mem 0xfd807000-0xfd8073ff]
[    0.904737] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.904795] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.904823] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.904904] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.904934] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[    0.905094] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[    0.905110] pci 0000:00:1f.2: reg 0x10: [io  0x1818-0x181f]
[    0.905116] pci 0000:00:1f.2: reg 0x14: [io  0x180c-0x180f]
[    0.905123] pci 0000:00:1f.2: reg 0x18: [io  0x1810-0x1817]
[    0.905129] pci 0000:00:1f.2: reg 0x1c: [io  0x1808-0x180b]
[    0.905136] pci 0000:00:1f.2: reg 0x20: [io  0x1820-0x183f]
[    0.905142] pci 0000:00:1f.2: reg 0x24: [mem 0xfd808000-0xfd8087ff]
[    0.905181] pci 0000:00:1f.2: PME# supported from D3hot
[    0.905250] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.905263] pci 0000:00:1f.3: reg 0x10: [mem 0xfd809000-0xfd8090ff 64bit]
[    0.905281] pci 0000:00:1f.3: reg 0x20: [io  0x1840-0x185f]
[    0.905368] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[    0.905388] pci 0000:00:1f.6: reg 0x10: [mem 0xfd80a000-0xfd80afff 64bit]
[    0.905554] pci 0000:01:00.0: [10de:0df0] type 00 class 0x030000
[    0.905562] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
[    0.905570] pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
[    0.905578] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
[    0.905583] pci 0000:01:00.0: reg 0x24: [io  0x2000-0x207f]
[    0.905589] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[    0.905664] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.905667] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.905669] pci 0000:00:01.0:   bridge window [mem 0xfb000000-0xfbffffff]
[    0.905672] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
[    0.905743] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[    0.905769] pci 0000:02:00.0: reg 0x10: [mem 0xfc000000-0xfc001fff 64bit]
[    0.905894] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.905926] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.915314] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.915321] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.915326] pci 0000:00:1c.0:   bridge window [mem 0xfc000000-0xfcffffff]
[    0.915334] pci 0000:00:1c.0:   bridge window [mem 0xfa000000-0xfaffffff 64bit pref]
[    0.915437] pci 0000:04:00.0: [197b:2382] type 00 class 0x088000
[    0.915455] pci 0000:04:00.0: reg 0x10: [mem 0xfd404000-0xfd4040ff]
[    0.915633] pci 0000:04:00.2: [197b:2381] type 00 class 0x080501
[    0.915651] pci 0000:04:00.2: reg 0x10: [mem 0xfd405000-0xfd4050ff]
[    0.915824] pci 0000:04:00.3: [197b:2383] type 00 class 0x088000
[    0.915842] pci 0000:04:00.3: reg 0x10: [mem 0xfd406000-0xfd4060ff]
[    0.916016] pci 0000:04:00.5: [197b:0250] type 00 class 0x020000
[    0.916034] pci 0000:04:00.5: reg 0x10: [mem 0xfd400000-0xfd403fff]
[    0.916058] pci 0000:04:00.5: reg 0x18: [io  0x4400-0x447f]
[    0.916070] pci 0000:04:00.5: reg 0x1c: [io  0x4000-0x40ff]
[    0.916170] pci 0000:04:00.5: PME# supported from D0 D3hot D3cold
[    0.925312] pci 0000:00:1c.1: PCI bridge to [bus 04]
[    0.925318] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.925324] pci 0000:00:1c.1:   bridge window [mem 0xfd400000-0xfd4fffff]
[    0.925470] pci 0000:05:00.0: [8086:422c] type 00 class 0x028000
[    0.925522] pci 0000:05:00.0: reg 0x10: [mem 0xfd500000-0xfd501fff 64bit]
[    0.925697] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    0.925751] pci 0000:05:00.0: System wakeup disabled by ACPI
[    0.935327] pci 0000:00:1c.2: PCI bridge to [bus 05]
[    0.935335] pci 0000:00:1c.2:   bridge window [mem 0xfd500000-0xfd5fffff]
[    0.935433] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[    0.935441] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.935443] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.935445] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.935446] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.935447] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.935449] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.935450] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
[    0.935872] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    0.935917] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.935960] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.936005] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.936048] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.936091] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.936135] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.936178] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.952031] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    0.952039] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.952047] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.952116] PCI host bridge to bus 0000:ff
[    0.952118] pci_bus 0000:ff: root bus resource [bus ff]
[    0.952122] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[    0.952159] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[    0.952198] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[    0.952231] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[    0.952265] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[    0.952298] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[    0.952462] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.952468] ACPI: \_SB_.PCI0: notify handler is installed
[    0.952500] ACPI: \_SB_.CPBG: notify handler is installed
[    0.952505] Found 2 acpi root devices
[    0.952644] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.952735] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.952739] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.952741] vgaarb: loaded
[    0.952742] vgaarb: bridge control possible 0000:01:00.0
[    0.952743] vgaarb: no bridge control possible 0000:00:02.0
[    0.952776] PCI: Using ACPI for IRQ routing
[    0.958136] PCI: pci_cache_line_size set to 64 bytes
[    0.958239] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
[    0.958241] e820: reserve RAM buffer [mem 0xb327c000-0xb3ffffff]
[    0.958242] e820: reserve RAM buffer [mem 0xb33d6000-0xb3ffffff]
[    0.958244] e820: reserve RAM buffer [mem 0xb345d000-0xb3ffffff]
[    0.958246] e820: reserve RAM buffer [mem 0xb3717000-0xb3ffffff]
[    0.958247] e820: reserve RAM buffer [mem 0xb376f000-0xb3ffffff]
[    0.958249] e820: reserve RAM buffer [mem 0xb37e1000-0xb3ffffff]
[    0.958250] e820: reserve RAM buffer [mem 0xb3800000-0xb3ffffff]
[    0.958335] NetLabel: Initializing
[    0.958336] NetLabel:  domain hash size = 128
[    0.958337] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.958352] NetLabel:  unlabeled traffic allowed by default
[    0.958370] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.958374] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.960397] Switched to clocksource hpet
[    0.964499] pnp: PnP ACPI init
[    0.964518] ACPI: bus type PNP registered
[    0.964591] pnp 00:00: [dma 4]
[    0.964613] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.964633] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.964730] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.964756] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.964809] system 00:04: [io  0x0500-0x050f] has been reserved
[    0.964811] system 00:04: [io  0x0600-0x0603] has been reserved
[    0.964813] system 00:04: [io  0xffff] has been reserved
[    0.964815] system 00:04: [io  0x0400-0x047f] could not be reserved
[    0.964817] system 00:04: [io  0x1180-0x11ff] has been reserved
[    0.964818] system 00:04: [io  0xfe00] has been reserved
[    0.964821] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.964862] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.964889] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.964933] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.965228] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.965230] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.965232] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.965234] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.965235] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.965237] system 00:08: [mem 0xfeaff000-0xfeafffff] has been reserved
[    0.965239] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.965241] system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.965242] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.965244] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    0.965246] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.965248] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.977100] pnp: PnP ACPI: found 9 devices
[    0.977103] ACPI: bus type PNP unregistered
[    0.983583] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[    0.983591] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
[    0.983593] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
[    0.983603] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.983605] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.983606] pci 0000:00:1c.2: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.983611] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.983613] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.983615] pci 0000:00:1c.2: BAR 13: assigned [io  0x5000-0x5fff]
[    0.983619] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000)
[    0.983621] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.983624] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.983626] pci 0000:00:01.0:   bridge window [mem 0xfb000000-0xfbffffff]
[    0.983628] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
[    0.983632] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.983634] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.983638] pci 0000:00:1c.0:   bridge window [mem 0xfc000000-0xfcffffff]
[    0.983641] pci 0000:00:1c.0:   bridge window [mem 0xfa000000-0xfaffffff 64bit pref]
[    0.983645] pci 0000:00:1c.1: PCI bridge to [bus 04]
[    0.983648] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.983651] pci 0000:00:1c.1:   bridge window [mem 0xfd400000-0xfd4fffff]
[    0.983654] pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.983659] pci 0000:00:1c.2: PCI bridge to [bus 05]
[    0.983661] pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
[    0.983665] pci 0000:00:1c.2:   bridge window [mem 0xfd500000-0xfd5fffff]
[    0.983668] pci 0000:00:1c.2:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.983673] pci 0000:00:1e.0: PCI bridge to [bus 06]
[    0.983682] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.983683] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.983685] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.983686] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.983688] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.983689] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.983691] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfeafffff]
[    0.983692] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.983694] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfbffffff]
[    0.983695] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
[    0.983697] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.983699] pci_bus 0000:02: resource 1 [mem 0xfc000000-0xfcffffff]
[    0.983700] pci_bus 0000:02: resource 2 [mem 0xfa000000-0xfaffffff 64bit pref]
[    0.983702] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.983703] pci_bus 0000:04: resource 1 [mem 0xfd400000-0xfd4fffff]
[    0.983705] pci_bus 0000:04: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.983707] pci_bus 0000:05: resource 0 [io  0x5000-0x5fff]
[    0.983708] pci_bus 0000:05: resource 1 [mem 0xfd500000-0xfd5fffff]
[    0.983710] pci_bus 0000:05: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.983711] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
[    0.983713] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
[    0.983714] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[    0.983720] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.983722] pci_bus 0000:06: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.983723] pci_bus 0000:06: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.983725] pci_bus 0000:06: resource 10 [mem 0xc0000000-0xfeafffff]
[    0.983759] NET: Registered protocol family 2
[    0.983925] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.984078] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.984274] TCP: Hash tables configured (established 65536 bind 65536)
[    0.984308] TCP: reno registered
[    0.984318] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.984350] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.984430] NET: Registered protocol family 1
[    0.984445] pci 0000:00:02.0: Boot video device
[    0.985087] PCI: CLS 64 bytes, default 64
[    0.985140] Unpacking initramfs...
[    1.067559] Freeing initrd memory: 5020K (ffff880037622000 - ffff880037b09000)
[    1.067566] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.067569] software IO TLB [mem 0xaf27c000-0xb327c000] (64MB) mapped at [ffff8800af27c000-ffff8800b327bfff]
[    1.067595] Simple Boot Flag at 0x36 set to 0x80
[    1.067753] Scanning for low memory corruption every 60 seconds
[    1.068019] audit: initializing netlink socket (disabled)
[    1.068037] type=2000 audit(1391703024.956:1): initialized
[    1.078847] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.080032] zbud: loaded
[    1.080174] VFS: Disk quotas dquot_6.5.2
[    1.080209] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.080366] msgmni has been set to 15315
[    1.080413] Key type big_key registered
[    1.080617] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.080650] io scheduler noop registered
[    1.080652] io scheduler deadline registered
[    1.080675] io scheduler cfq registered (default)
[    1.080892] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.081197] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.081209] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.081248] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    1.081250] vesafb: scrolling: redraw
[    1.081251] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.081563] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010e80000, using 3072k, total 3072k
[    1.194893] Console: switching to colour frame buffer device 128x48
[    1.308183] fb0: VESA VGA frame buffer device
[    1.308194] intel_idle: MWAIT substates: 0x1120
[    1.308195] intel_idle: v0.4 model 0x25
[    1.308196] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.308314] GHES: HEST is not enabled!
[    1.308360] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.308682] Linux agpgart interface v0.103
[    1.308841] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.308871] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.308948] drop_monitor: Initializing network drop monitor service
[    1.308997] TCP: cubic registered
[    1.309073] NET: Registered protocol family 10
[    1.309212] NET: Registered protocol family 17
[    1.309220] Key type dns_resolver registered
[    1.309414] registered taskstats version 1
[    1.310174]   Magic number: 2:737:185
[    1.310277] rtc_cmos 00:05: setting system clock to 2014-02-06 16:10:26 UTC (1391703026)
[    1.310332] PM: Hibernation image not present or could not be loaded.
[    1.311344] Freeing unused kernel memory: 1124K (ffffffff818d3000 - ffffffff819ec000)
[    1.311345] Write protecting the kernel read-only data: 8192k
[    1.313315] Freeing unused kernel memory: 864K (ffff880001528000 - ffff880001600000)
[    1.314198] Freeing unused kernel memory: 376K (ffff8800017a2000 - ffff880001800000)
[    1.325398] systemd-udevd[57]: starting version 208
[    1.329220] [drm] Initialized drm 1.1.0 20060810
[    1.329848] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    1.329926] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.330649] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[    1.330819] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.331303] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.331309] ACPI: Power Button [PWRB]
[    1.331389] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    1.331395] ACPI: Sleep Button [SLPB]
[    1.331462] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    1.343634] ACPI: Lid Switch [LID0]
[    1.343729] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.343736] ACPI: Power Button [PWRF]
[    1.352376] [drm] Memory usable by graphics device = 2048M
[    1.352384] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[    1.352387] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    1.352413] Console: switching to colour dummy device 80x25
[    1.433670] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[    1.433684] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.433686] [drm] Driver supports precise vblank timestamp query.
[    1.433876] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[    1.476636] fbcon: inteldrmfb (fb0) is primary device
[    2.069852] tsc: Refined TSC clocksource calibration: 2526.999 MHz
[    2.233133] Console: switching to colour frame buffer device 200x56
[    2.241055] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.241058] i915 0000:00:02.0: registered panic notifier
[    2.241123] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20131115/video-1111)
[    2.241131] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    2.241215] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4
[    2.241304] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.366440] acpi device:06: registered as cooling_device0
[    2.366541] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5
[    2.366594] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.387976] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.393983] i8042: Detected active multiplexing controller, rev 1.1
[    2.397356] ACPI: bus type USB registered
[    2.397406] usbcore: registered new interface driver usbfs
[    2.397422] usbcore: registered new interface driver hub
[    2.397426] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.397493] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.397537] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.397577] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.397589] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.398375] usbcore: registered new device driver usb
[    2.398901] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.399059] ehci-pci: EHCI PCI platform driver
[    2.399729] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.399751] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.399766] ehci-pci 0000:00:1a.0: debug port 2
[    2.403787] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.403823] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfd806000
[    2.405808] SCSI subsystem initialized
[    2.407225] libata version 3.00 loaded.
[    2.412961] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.413651] hub 1-0:1.0: USB hub found
[    2.413672] hub 1-0:1.0: 3 ports detected
[    2.413882] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    2.413890] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    2.414107] xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X
[    2.414116] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
[    2.414123] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.414130] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[    2.414136] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[    2.414533] hub 2-0:1.0: USB hub found
[    2.414548] hub 2-0:1.0: 2 ports detected
[    2.414679] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    2.414684] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    2.417464] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.417610] hub 3-0:1.0: USB hub found
[    2.417625] hub 3-0:1.0: 2 ports detected
[    2.417870] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    2.417883] ehci-pci 0000:00:1d.0: debug port 2
[    2.421840] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.421861] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfd807000
[    2.429725] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.430511] hub 4-0:1.0: USB hub found
[    2.430522] hub 4-0:1.0: 3 ports detected
[    2.430661] ahci 0000:00:1f.2: version 3.0
[    2.430875] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[    2.430913] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.430941] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
[    2.430946] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
[    2.443413] scsi0 : ahci
[    2.443577] scsi1 : ahci
[    2.443711] scsi2 : ahci
[    2.443856] scsi3 : ahci
[    2.443996] scsi4 : ahci
[    2.444035] ata1: SATA max UDMA/133 abar m2048@0xfd808000 port 0xfd808100 irq 47
[    2.444038] ata2: SATA max UDMA/133 abar m2048@0xfd808000 port 0xfd808180 irq 47
[    2.444039] ata3: DUMMY
[    2.444040] ata4: DUMMY
[    2.444041] ata5: SATA max UDMA/133 abar m2048@0xfd808000 port 0xfd808300 irq 47
[    2.467326] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
[    2.719581] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.762829] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.763250] ata1.00: ATA-8: INTEL SSDSA2CW080G3, 4PC10362, max UDMA/133
[    2.763255] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.763761] ata1.00: configured for UDMA/133
[    2.764087] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSA2CW08 4PC1 PQ: 0 ANSI: 5
[    2.843547] hub 1-1:1.0: USB hub found
[    2.843689] hub 1-1:1.0: 6 ports detected
[    2.949452] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    3.069509] Switched to clocksource tsc
[    3.073342] hub 4-1:1.0: USB hub found
[    3.073567] hub 4-1:1.0: 8 ports detected
[    3.082623] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.084495] ata2.00: ATAPI: Optiarc DVD RW AD-7700S, 1.03, max UDMA/100
[    3.091322] ata2.00: configured for UDMA/100
[    3.107327] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7700S  1.03 PQ: 0 ANSI: 5
[    3.152799] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    3.244184] hidraw: raw HID events driver (C) Jiri Kosina
[    3.252679] usbcore: registered new interface driver usbhid
[    3.252685] usbhid: USB HID core driver
[    3.256127] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input2
[    3.260005] input: Logitech Unifying Device. Wireless PID:4013 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/input/input11
[    3.260119] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4013] on usb-0000:00:1a.0-1.1:1
[    3.262174] input: Logitech Unifying Device. Wireless PID:4101 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/input/input12
[    3.262289] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4101] on usb-0000:00:1a.0-1.1:2
[    3.264211] input: Logitech Unifying Device. Wireless PID:4026 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/input/input13
[    3.264302] logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4026] on usb-0000:00:1a.0-1.1:3
[    3.425794] ata5: SATA link down (SStatus 0 SControl 300)
[    3.428951] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    3.429044] sd 0:0:0:0: [sda] Write Protect is off
[    3.429047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.429073] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.431720]  sda: sda1 sda2 sda3
[    3.433226] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.446074] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.446080] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.446336] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.548641] device-mapper: uevent: version 1.0.3
[    3.548888] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    9.979634] random: cryptsetup urandom read with 106 bits of entropy available
[    9.989549] sha256_ssse3: Using SSSE3 optimized SHA-256 implementation
[   10.022715] bio: create slab <bio-1> at 1
[   10.106621] bio: create slab <bio-1> at 1
[   10.206520] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   10.219703] random: nonblocking pool is initialized
[   10.373291] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[   10.374126] systemd[1]: Set hostname to <al>.
[   10.483286] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[   10.483346] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.483358] systemd[1]: Starting Remote File Systems.
[   10.483369] systemd[1]: Reached target Remote File Systems.
[   10.483376] systemd[1]: Starting Device-mapper event daemon FIFOs.
[   10.483403] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   10.483410] systemd[1]: Starting Delayed Shutdown Socket.
[   10.483433] systemd[1]: Listening on Delayed Shutdown Socket.
[   10.483440] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[   10.483454] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   10.483461] systemd[1]: Starting LVM2 metadata daemon socket.
[   10.483481] systemd[1]: Listening on LVM2 metadata daemon socket.
[   10.483491] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[   10.483514] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   10.483520] systemd[1]: Starting Paths.
[   10.483527] systemd[1]: Reached target Paths.
[   10.483552] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[   10.483637] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.483649] systemd[1]: Starting udev Kernel Socket.
[   10.483668] systemd[1]: Listening on udev Kernel Socket.
[   10.483677] systemd[1]: Starting udev Control Socket.
[   10.483696] systemd[1]: Listening on udev Control Socket.
[   10.483704] systemd[1]: Starting Journal Socket.
[   10.483733] systemd[1]: Listening on Journal Socket.
[   10.484678] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   10.488070] systemd[1]: Starting Load Kernel Modules...
[   10.488373] systemd[1]: Starting Setup Virtual Console...
[   10.491969] systemd[1]: Starting Apply Kernel Variables...
[   10.492594] systemd[1]: Mounting POSIX Message Queue File System...
[   10.493274] systemd[1]: Starting udev Coldplug all Devices...
[   10.496132] systemd[1]: Started Set Up Additional Binary Formats.
[   10.496163] systemd[1]: Starting Journal Service...
[   10.496648] systemd[1]: Started Journal Service.
[   10.523528] EXT4-fs (dm-0): re-mounted. Opts: discard
[   10.529947] systemd-journald[175]: Vacuuming done, freed 0 bytes
[   10.623714] systemd-udevd[198]: starting version 208
[   10.723626] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   10.723634] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.723638] ACPI Warning: 0x00000000000011c0-0x00000000000011cf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   10.723640] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.723641] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   10.723644] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.723645] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   10.723647] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.723648] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.725094] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[   10.725561] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[   10.727692] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.758570] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[   10.758580] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.774017] jme: JMicron JMC2XX ethernet driver version 1.0.8
[   10.774046] jme 0000:04:00.5: can't disable ASPM; OS doesn't have ASPM control
[   10.779544] sdhci: Secure Digital Host Controller Interface driver
[   10.779547] sdhci: Copyright(c) Pierre Ossman
[   10.791758] cfg80211: Calling CRDA to update world regulatory domain
[   10.801362] Intel(R) Wireless WiFi driver for Linux, in-tree:
[   10.801367] Copyright(c) 2003-2013 Intel Corporation
[   10.822157] mousedev: PS/2 mouse device common for all mice
[   10.836707] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[   10.839252] platform microcode: Direct firmware load failed with error -2
[   10.839254] platform microcode: Falling back to user helper
[   10.933251] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: discard
[   10.943748] systemd-journald[175]: Received request to flush runtime journal from PID 1
[   11.001989] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[   11.003029] jme 0000:04:00.5 eth0: JMC250 Gigabit Ethernet chiprev:23 pcirev:3 macaddr:[STRIPPED]
[   11.019630] iTCO_vendor_support: vendor-support=0
[   11.020427] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[   11.020470] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[   11.020614] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   11.036203] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[   11.036282] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   11.036345] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   11.046710] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[   11.046729] platform microcode: Direct firmware load failed with error -2
[   11.046732] platform microcode: Falling back to user helper
[   11.051661] iwlwifi 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[   11.051820] iwlwifi 0000:05:00.0: irq 49 for MSI/MSI-X
[   11.052017] iwlwifi 0000:05:00.0: Direct firmware load failed with error -2
[   11.052021] iwlwifi 0000:05:00.0: Falling back to user helper
[   11.064016] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[   11.064036] platform microcode: Direct firmware load failed with error -2
[   11.064039] platform microcode: Falling back to user helper
[   11.069500] iwlwifi 0000:05:00.0: Direct firmware load failed with error -2
[   11.069506] iwlwifi 0000:05:00.0: Falling back to user helper
[   11.070294] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[   11.070309] platform microcode: Direct firmware load failed with error -2
[   11.070312] platform microcode: Falling back to user helper
[   11.070974] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   11.083320] iwlwifi 0000:05:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[   11.110900] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   11.119403] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   11.119407] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[   11.119409] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   11.119411] iwlwifi 0000:05:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
[   11.119507] iwlwifi 0000:05:00.0: L1 Enabled; Disabling L0S
[   11.139254] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   11.228514] sdhci-pci 0000:04:00.0: SDHCI controller found [197b:2382] (rev 80)
[   11.381919] mmc0: SDHCI controller on PCI [0000:04:00.0] using ADMA
[   11.381940] sdhci-pci 0000:04:00.2: SDHCI controller found [197b:2381] (rev 80)
[   11.444730] sdhci-pci 0000:04:00.2: Refusing to bind to secondary interface.
[   11.461899] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   11.481358] thermal LNXTHERM:00: registered as thermal_zone0
[   11.481363] ACPI: Thermal Zone [TZ0] (46 C)
[   11.499940] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   11.500550] tun: Universal TUN/TAP device driver, 1.6
[   11.500553] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   11.506554] sit: IPv6 over IPv4 tunneling driver
[   11.517628] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.536659] type=1006 audit(1391703036.726:2): pid=292 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1
[   11.582300] Netfilter messages via NETLINK v0.30.
[   11.586980] ip_set: protocol 6
[   11.733632] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 582762
[   11.737934] ACPI: Battery Slot [BAT0] (battery present)
[   11.738155] wmi: Mapper loaded
[   11.776521] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input17
[   12.074034] jme 0000:04:00.5: irq 50 for MSI/MSI-X
[   12.098349] jme 0000:04:00.5 eth0: Link is down
[   12.098374] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.102380] iwlwifi 0000:05:00.0: L1 Enabled; Disabling L0S
[   12.110076] iwlwifi 0000:05:00.0: Radio type=0x1-0x3-0x1
[   12.224299] ACPI: AC Adapter [AC] (on-line)
[   12.320406] iwlwifi 0000:05:00.0: L1 Enabled; Disabling L0S
[   12.327298] iwlwifi 0000:05:00.0: Radio type=0x1-0x3-0x1
[   12.450807] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.232175] type=1006 audit(1391703043.426:3): pid=410 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=2 res=1
[   18.246002] type=1006 audit(1391703043.440:4): pid=411 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=3 res=1
[   19.145712] wlan0: authenticate with [STRIPPED]
[   19.189240] wlan0: send auth to [STRIPPED] (try 1/3)
[   19.193193] wlan0: authenticated
[   19.193653] wlan0: associate with [STRIPPED] (try 1/3)
[   19.197538] wlan0: RX AssocResp from [STRIPPED] (capab=0x411 status=0 aid=6)
[   19.202289] wlan0: associated
[   19.202341] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   46.037942] wlan0: deauthenticating from [STRIPPED] by local choice (reason=3)
[   46.051474] cfg80211: Calling CRDA to update world regulatory domain
[   46.150078] PM: Syncing filesystems ... done.
[   46.172553] PM: Preparing system for mem sleep
[   46.172950] Freezing user space processes ... (elapsed 0.001 seconds) done.
[   46.174264] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[   46.175018] PM: Entering mem sleep
[   46.175100] Suspending console(s) (use no_console_suspend to debug)
[   46.175802] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   46.175910] sd 0:0:0:0: [sda] Stopping disk
[   46.584887] PM: suspend of devices complete after 409.560 msecs
[   46.585105] PM: late suspend of devices complete after 0.214 msecs
[   46.598151] pcieport 0000:00:1c.1: System wakeup enabled by ACPI
[   46.611503] xhci_hcd 0000:02:00.0: System wakeup enabled by ACPI
[   46.624912] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[   46.638197] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[   46.651480] PM: noirq suspend of devices complete after 66.408 msecs
[   46.651663] ACPI: Preparing to enter system sleep state S3
[   46.686178] PM: Saving platform NVS memory
[   46.687271] Disabling non-boot CPUs ...
[   46.688744] kvm: disabling virtualization on CPU1
[   46.689002] smpboot: CPU 1 is now offline
[   46.690855] kvm: disabling virtualization on CPU2
[   46.791268] smpboot: CPU 2 is now offline
[   46.793027] kvm: disabling virtualization on CPU3
[   46.894598] smpboot: CPU 3 is now offline
[   46.895753] ACPI: Low-level resume complete
[   46.895792] PM: Restoring platform NVS memory
[   46.896289] CPU0: Thermal monitoring handled by SMI
[   46.896298] Enabling non-boot CPUs ...
[   46.896347] x86: Booting SMP configuration:
[   46.896348] smpboot: Booting Node 0 Processor 1 APIC 0x4
[   46.907384] CPU1: Thermal monitoring handled by SMI
[   46.907419] kvm: enabling virtualization on CPU1
[   46.909790] CPU1 is up
[   46.909810] smpboot: Booting Node 0 Processor 2 APIC 0x1
[   46.920946] CPU2: Thermal monitoring handled by SMI
[   46.920981] kvm: enabling virtualization on CPU2
[   46.923367] CPU2 is up
[   46.923387] smpboot: Booting Node 0 Processor 3 APIC 0x5
[   46.934519] CPU3: Thermal monitoring handled by SMI
[   46.934551] kvm: enabling virtualization on CPU3
[   46.936946] CPU3 is up
[   46.939418] ACPI: Waking up from system sleep state S3
[   47.632110] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[   47.658753] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[   47.685428] xhci_hcd 0000:02:00.0: System wakeup disabled by ACPI
[   47.739044] PM: noirq resume of devices complete after 133.370 msecs
[   47.739325] PM: early resume of devices complete after 0.234 msecs
[   47.739697] pcieport 0000:00:1c.1: System wakeup disabled by ACPI
[   47.741451] iwlwifi 0000:05:00.0: RF_KILL bit toggled to enable radio.
[   47.849065] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[   48.078534] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   48.078575] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   48.079516] ata1.00: configured for UDMA/133
[   48.079626] sd 0:0:0:0: [sda] Starting disk
[   48.085151] ata5: SATA link down (SStatus 0 SControl 300)
[   48.248163] ata2.00: configured for UDMA/100
[   49.169417] PM: resume of devices complete after 1430.899 msecs
[   49.169733] iwlwifi 0000:05:00.0: no hotplug settings from platform
[   49.169743] PM: Finishing wakeup.
[   49.169744] Restarting tasks ... done.
[   49.170691] video LNXVIDEO:00: Restoring backlight state
[   49.170694] video LNXVIDEO:01: Restoring backlight state
[   49.644845] ACPI: \_SB_.AC__: ACPI_NOTIFY_BUS_CHECK event: unsupported
[   49.646671] jme 0000:04:00.5: irq 50 for MSI/MSI-X
[   49.671645] jme 0000:04:00.5 eth0: Link is down
[   49.671717] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   49.674119] iwlwifi 0000:05:00.0: L1 Enabled; Disabling L0S
[   49.681037] iwlwifi 0000:05:00.0: Radio type=0x1-0x3-0x1
[   49.778035] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   49.806241] xhci_hcd 0000:02:00.0: no hotplug settings from platform
[   49.859417] iwlwifi 0000:05:00.0: no hotplug settings from platform
[   56.264694] wlan0: authenticate with [STRIPPED]
[   56.277969] wlan0: send auth to [STRIPPED] (try 1/3)
[   56.282076] wlan0: authenticated
[   56.283879] wlan0: associate with [STRIPPED] (try 1/3)
[   56.297196] wlan0: RX AssocResp from [STRIPPED] (capab=0x411 status=0 aid=6)
[   56.303746] wlan0: associated
[   56.303826] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready


  reply	other threads:[~2014-02-06 23:27 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-05 23:42 3.12: ethernet controller missing after resuming from suspend to RAM Bastien Traverse
2014-02-06  7:38 ` Francis Moreau
2014-02-06 12:40   ` Rafael J. Wysocki
2014-02-06 13:33     ` Francis Moreau
2014-02-06 23:15     ` Bastien Traverse
2014-02-07  7:29       ` Francis Moreau
2014-02-06 21:08 ` Peter Wu
2014-02-06 23:28   ` Rafael J. Wysocki
2014-02-06 23:27     ` Peter Wu [this message]
2014-02-06 23:48       ` Rafael J. Wysocki
2014-02-07 13:43         ` Peter Wu
2014-02-08 15:01           ` Rafael J. Wysocki
2014-02-08 21:34             ` Peter Wu
2014-02-09 21:46               ` Rafael J. Wysocki
2014-02-09 23:18                 ` Peter Wu
2014-02-10  0:52                   ` Rafael J. Wysocki
2014-02-10  1:15                     ` Peter Wu
2014-02-10 12:10                       ` Rafael J. Wysocki
2014-02-10 12:20                         ` Mika Westerberg
2014-02-10 22:39                           ` Rafael J. Wysocki
2014-02-11 10:42                             ` Mika Westerberg
2014-02-11 12:57                               ` Rafael J. Wysocki
2014-02-11 18:17                               ` Peter Wu
2014-02-11 23:58                                 ` Rafael J. Wysocki
2014-02-12  7:44                                   ` Francis Moreau
2014-02-12 14:04                                     ` Rafael J. Wysocki
2014-02-18 12:18                                       ` Bastien Traverse
2014-02-12  9:21                                   ` Mika Westerberg
2014-02-06 23:41     ` Bastien Traverse
2014-02-07  1:19       ` Rafael J. Wysocki
2014-02-09 18:44         ` Bastien Traverse
2014-02-09 22:07           ` Peter Wu
2014-02-11 18:14             ` Bastien Traverse
2014-02-10  8:17           ` Francis Moreau
  -- strict thread matches above, loose matches on Subject: below --
2013-12-12  8:00 Francis Moreau
2013-12-12  9:28 ` Francis Moreau
2013-12-12 14:57 ` Rafael J. Wysocki
2013-12-12 17:43   ` Francis Moreau
2013-12-12 17:58     ` Rafael J. Wysocki
2013-12-12 19:17       ` Francis Moreau
2013-12-17  8:05         ` Francis Moreau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1396879.yH0LySDBlU@al \
    --to=lekensteyn@gmail.com \
    --cc=bastien.traverse@gmail.com \
    --cc=francis.moro@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.