From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
To: Kukjin Kim <kgene@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
Kyungmin Park <kyungmin.park@samsung.com>,
stable@vger.kernel.org,
Marek Szyprowski <m.szyprowski@samsung.com>
Subject: Re: [RESEND PATCH] ARM: EXYNOS: Fix failed second suspend on Exynos4
Date: Tue, 03 Mar 2015 12:28:17 +0100 [thread overview]
Message-ID: <13977718.vr52PylqCh@amdc1032> (raw)
In-Reply-To: <2802418.zt8CxNGGkT@amdc1032>
Hi Kukjin,
It has been a month since this regression fix was originally posted:
https://lkml.org/lkml/2015/2/3/481
Could you please review/apply it? Thank you.
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
On Monday, February 23, 2015 05:25:48 PM Bartlomiej Zolnierkiewicz wrote:
>
> Hi,
>
> On Wednesday, February 18, 2015 11:45:25 AM Krzysztof Kozlowski wrote:
> > On Exynos4412 boards (Trats2, Odroid U3) after enabling L2 cache in
> > 56b60b8bce4a ("ARM: 8265/1: dts: exynos4: Add nodes for L2 cache
> > controller") the second suspend to RAM failed. First suspend worked fine
> > but the next one hang just after powering down of secondary CPUs (system
> > consumed energy as it would be running but was not responsive).
> >
> > The issue was caused by enabling delayed reset assertion for CPU0 just
> > after issuing power down of cores. This was introduced for Exynos4 in
> > 13cfa6c4f7fa ("ARM: EXYNOS: Fix CPU idle clock down after CPU off").
> >
> > The whole behavior is not well documented but after checking with vendor
> > code this should be done like this (on Exynos4):
> > 1. Enable delayed reset assertion when system is running (for all CPUs).
> > 2. Disable delayed reset assertion before suspending the system.
> > This can be done after powering off secondary CPUs.
> > 3. Re-enable the delayed reset assertion when system is resumed.
> >
> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > Fixes: 13cfa6c4f7fa ("ARM: EXYNOS: Fix CPU idle clock down after CPU off")
> > Cc: <stable@vger.kernel.org>
>
> It turned out that this patch is also needed to fix cpuidle AFTR mode
> hang on Trats2.
>
> Tested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
>
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
WARNING: multiple messages have this Message-ID (diff)
From: b.zolnierkie@samsung.com (Bartlomiej Zolnierkiewicz)
To: linux-arm-kernel@lists.infradead.org
Subject: [RESEND PATCH] ARM: EXYNOS: Fix failed second suspend on Exynos4
Date: Tue, 03 Mar 2015 12:28:17 +0100 [thread overview]
Message-ID: <13977718.vr52PylqCh@amdc1032> (raw)
In-Reply-To: <2802418.zt8CxNGGkT@amdc1032>
Hi Kukjin,
It has been a month since this regression fix was originally posted:
https://lkml.org/lkml/2015/2/3/481
Could you please review/apply it? Thank you.
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
On Monday, February 23, 2015 05:25:48 PM Bartlomiej Zolnierkiewicz wrote:
>
> Hi,
>
> On Wednesday, February 18, 2015 11:45:25 AM Krzysztof Kozlowski wrote:
> > On Exynos4412 boards (Trats2, Odroid U3) after enabling L2 cache in
> > 56b60b8bce4a ("ARM: 8265/1: dts: exynos4: Add nodes for L2 cache
> > controller") the second suspend to RAM failed. First suspend worked fine
> > but the next one hang just after powering down of secondary CPUs (system
> > consumed energy as it would be running but was not responsive).
> >
> > The issue was caused by enabling delayed reset assertion for CPU0 just
> > after issuing power down of cores. This was introduced for Exynos4 in
> > 13cfa6c4f7fa ("ARM: EXYNOS: Fix CPU idle clock down after CPU off").
> >
> > The whole behavior is not well documented but after checking with vendor
> > code this should be done like this (on Exynos4):
> > 1. Enable delayed reset assertion when system is running (for all CPUs).
> > 2. Disable delayed reset assertion before suspending the system.
> > This can be done after powering off secondary CPUs.
> > 3. Re-enable the delayed reset assertion when system is resumed.
> >
> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > Fixes: 13cfa6c4f7fa ("ARM: EXYNOS: Fix CPU idle clock down after CPU off")
> > Cc: <stable@vger.kernel.org>
>
> It turned out that this patch is also needed to fix cpuidle AFTR mode
> hang on Trats2.
>
> Tested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
>
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
next prev parent reply other threads:[~2015-03-03 11:28 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-18 10:45 [RESEND PATCH] ARM: EXYNOS: Fix failed second suspend on Exynos4 Krzysztof Kozlowski
2015-02-18 10:45 ` Krzysztof Kozlowski
2015-02-23 16:25 ` Bartlomiej Zolnierkiewicz
2015-02-23 16:25 ` Bartlomiej Zolnierkiewicz
2015-02-23 17:12 ` Krzysztof Kozlowski
2015-02-23 17:12 ` Krzysztof Kozlowski
2015-03-03 11:28 ` Bartlomiej Zolnierkiewicz [this message]
2015-03-03 11:28 ` Bartlomiej Zolnierkiewicz
2015-02-24 2:38 ` Chanwoo Choi
2015-02-24 2:38 ` Chanwoo Choi
2015-02-24 7:59 ` Krzysztof Kozlowski
2015-02-24 7:59 ` Krzysztof Kozlowski
2015-02-24 8:45 ` Chanwoo Choi
2015-02-24 8:45 ` Chanwoo Choi
2015-02-24 8:46 ` Chanwoo Choi
2015-02-24 8:46 ` Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=13977718.vr52PylqCh@amdc1032 \
--to=b.zolnierkie@samsung.com \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.