From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Shannon Nelson <shannon.nelson@intel.com>,
netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 09/16] i40e/i40evf: update AdminQ API
Date: Tue, 22 Apr 2014 05:39:24 -0700 [thread overview]
Message-ID: <1398170371-3333-10-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1398170371-3333-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Shannon Nelson <shannon.nelson@intel.com>
Reflect recent changes in firmware:
- remove storm control
- simplify PHY link management values
- add partition bandwidth configuration
Change-ID: If266ed2f9a89ad176cf8a74aeaef68613af76bc8
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h | 41 +++++++---------------
.../net/ethernet/intel/i40evf/i40e_adminq_cmd.h | 41 +++++++---------------
2 files changed, 24 insertions(+), 58 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
index 7b6374a..f2ba4b7 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
@@ -182,9 +182,6 @@ enum i40e_admin_queue_opc {
i40e_aqc_opc_add_mirror_rule = 0x0260,
i40e_aqc_opc_delete_mirror_rule = 0x0261,
- i40e_aqc_opc_set_storm_control_config = 0x0280,
- i40e_aqc_opc_get_storm_control_config = 0x0281,
-
/* DCB commands */
i40e_aqc_opc_dcb_ignore_pfc = 0x0301,
i40e_aqc_opc_dcb_updated = 0x0302,
@@ -207,6 +204,7 @@ enum i40e_admin_queue_opc {
i40e_aqc_opc_query_switching_comp_bw_config = 0x041A,
i40e_aqc_opc_suspend_port_tx = 0x041B,
i40e_aqc_opc_resume_port_tx = 0x041C,
+ i40e_aqc_opc_configure_partition_bw = 0x041D,
/* hmc */
i40e_aqc_opc_query_hmc_resource_profile = 0x0500,
@@ -1289,27 +1287,6 @@ struct i40e_aqc_add_delete_mirror_rule_completion {
I40E_CHECK_CMD_LENGTH(i40e_aqc_add_delete_mirror_rule_completion);
-/* Set Storm Control Configuration (direct 0x0280)
- * Get Storm Control Configuration (direct 0x0281)
- * the command and response use the same descriptor structure
- */
-struct i40e_aqc_set_get_storm_control_config {
- __le32 broadcast_threshold;
- __le32 multicast_threshold;
- __le32 control_flags;
-#define I40E_AQC_STORM_CONTROL_MDIPW 0x01
-#define I40E_AQC_STORM_CONTROL_MDICW 0x02
-#define I40E_AQC_STORM_CONTROL_BDIPW 0x04
-#define I40E_AQC_STORM_CONTROL_BDICW 0x08
-#define I40E_AQC_STORM_CONTROL_BIDU 0x10
-#define I40E_AQC_STORM_CONTROL_INTERVAL_SHIFT 8
-#define I40E_AQC_STORM_CONTROL_INTERVAL_MASK (0x3FF << \
- I40E_AQC_STORM_CONTROL_INTERVAL_SHIFT)
- u8 reserved[4];
-};
-
-I40E_CHECK_CMD_LENGTH(i40e_aqc_set_get_storm_control_config);
-
/* DCB 0x03xx*/
/* PFC Ignore (direct 0x0301)
@@ -1499,6 +1476,15 @@ struct i40e_aqc_query_switching_comp_bw_config_resp {
* (direct 0x041B and 0x041C) uses the generic SEID struct
*/
+/* Configure partition BW
+ * (indirect 0x041D)
+ */
+struct i40e_aqc_configure_partition_bw_data {
+ __le16 pf_valid_bits;
+ u8 min_bw[16]; /* guaranteed bandwidth */
+ u8 max_bw[16]; /* bandwidth limit */
+};
+
/* Get and set the active HMC resource profile and status.
* (direct 0x0500) and (direct 0x0501)
*/
@@ -1583,11 +1569,8 @@ struct i40e_aq_get_phy_abilities_resp {
#define I40E_AQ_PHY_FLAG_PAUSE_TX 0x01
#define I40E_AQ_PHY_FLAG_PAUSE_RX 0x02
#define I40E_AQ_PHY_FLAG_LOW_POWER 0x04
-#define I40E_AQ_PHY_FLAG_AN_SHIFT 3
-#define I40E_AQ_PHY_FLAG_AN_MASK (0x3 << I40E_AQ_PHY_FLAG_AN_SHIFT)
-#define I40E_AQ_PHY_FLAG_AN_OFF 0x00 /* link forced on */
-#define I40E_AQ_PHY_FLAG_AN_OFF_LINK_DOWN 0x01
-#define I40E_AQ_PHY_FLAG_AN_ON 0x02
+#define I40E_AQ_PHY_LINK_ENABLED 0x08
+#define I40E_AQ_PHY_AN_ENABLED 0x10
#define I40E_AQ_PHY_FLAG_MODULE_QUAL 0x20
__le16 eee_capability;
#define I40E_AQ_EEE_100BASE_TX 0x0002
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
index 97662b6..6e61766 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
@@ -180,9 +180,6 @@ enum i40e_admin_queue_opc {
i40e_aqc_opc_add_mirror_rule = 0x0260,
i40e_aqc_opc_delete_mirror_rule = 0x0261,
- i40e_aqc_opc_set_storm_control_config = 0x0280,
- i40e_aqc_opc_get_storm_control_config = 0x0281,
-
/* DCB commands */
i40e_aqc_opc_dcb_ignore_pfc = 0x0301,
i40e_aqc_opc_dcb_updated = 0x0302,
@@ -205,6 +202,7 @@ enum i40e_admin_queue_opc {
i40e_aqc_opc_query_switching_comp_bw_config = 0x041A,
i40e_aqc_opc_suspend_port_tx = 0x041B,
i40e_aqc_opc_resume_port_tx = 0x041C,
+ i40e_aqc_opc_configure_partition_bw = 0x041D,
/* hmc */
i40e_aqc_opc_query_hmc_resource_profile = 0x0500,
@@ -1289,27 +1287,6 @@ struct i40e_aqc_add_delete_mirror_rule_completion {
I40E_CHECK_CMD_LENGTH(i40e_aqc_add_delete_mirror_rule_completion);
-/* Set Storm Control Configuration (direct 0x0280)
- * Get Storm Control Configuration (direct 0x0281)
- * the command and response use the same descriptor structure
- */
-struct i40e_aqc_set_get_storm_control_config {
- __le32 broadcast_threshold;
- __le32 multicast_threshold;
- __le32 control_flags;
-#define I40E_AQC_STORM_CONTROL_MDIPW 0x01
-#define I40E_AQC_STORM_CONTROL_MDICW 0x02
-#define I40E_AQC_STORM_CONTROL_BDIPW 0x04
-#define I40E_AQC_STORM_CONTROL_BDICW 0x08
-#define I40E_AQC_STORM_CONTROL_BIDU 0x10
-#define I40E_AQC_STORM_CONTROL_INTERVAL_SHIFT 8
-#define I40E_AQC_STORM_CONTROL_INTERVAL_MASK (0x3FF << \
- I40E_AQC_STORM_CONTROL_INTERVAL_SHIFT)
- u8 reserved[4];
-};
-
-I40E_CHECK_CMD_LENGTH(i40e_aqc_set_get_storm_control_config);
-
/* DCB 0x03xx*/
/* PFC Ignore (direct 0x0301)
@@ -1499,6 +1476,15 @@ struct i40e_aqc_query_switching_comp_bw_config_resp {
* (direct 0x041B and 0x041C) uses the generic SEID struct
*/
+/* Configure partition BW
+ * (indirect 0x041D)
+ */
+struct i40e_aqc_configure_partition_bw_data {
+ __le16 pf_valid_bits;
+ u8 min_bw[16]; /* guaranteed bandwidth */
+ u8 max_bw[16]; /* bandwidth limit */
+};
+
/* Get and set the active HMC resource profile and status.
* (direct 0x0500) and (direct 0x0501)
*/
@@ -1583,11 +1569,8 @@ struct i40e_aq_get_phy_abilities_resp {
#define I40E_AQ_PHY_FLAG_PAUSE_TX 0x01
#define I40E_AQ_PHY_FLAG_PAUSE_RX 0x02
#define I40E_AQ_PHY_FLAG_LOW_POWER 0x04
-#define I40E_AQ_PHY_FLAG_AN_SHIFT 3
-#define I40E_AQ_PHY_FLAG_AN_MASK (0x3 << I40E_AQ_PHY_FLAG_AN_SHIFT)
-#define I40E_AQ_PHY_FLAG_AN_OFF 0x00 /* link forced on */
-#define I40E_AQ_PHY_FLAG_AN_OFF_LINK_DOWN 0x01
-#define I40E_AQ_PHY_FLAG_AN_ON 0x02
+#define I40E_AQ_PHY_LINK_ENABLED 0x08
+#define I40E_AQ_PHY_AN_ENABLED 0x10
#define I40E_AQ_PHY_FLAG_MODULE_QUAL 0x20
__le16 eee_capability;
#define I40E_AQ_EEE_100BASE_TX 0x0002
--
1.9.0
next prev parent reply other threads:[~2014-04-22 12:39 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-22 12:39 [net-next 00/16][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2014-04-22 12:39 ` [net-next 01/16] i40e: Add bridge FDB add/del/dump ops Jeff Kirsher
2014-04-22 12:39 ` [net-next 02/16] i40e/i40evf: unhide and enable to one prefena field Jeff Kirsher
2014-04-22 12:39 ` [net-next 03/16] i40e: Reset the VF upon conflicting VLAN configuration Jeff Kirsher
2014-04-22 12:39 ` [net-next 04/16] i40e: Enable VF Tx bandwidth setting Jeff Kirsher
2014-04-22 12:39 ` [net-next 05/16] i40e/i40evf: Bump build versions Jeff Kirsher
2014-04-22 12:39 ` [net-next 06/16] i40e: Remove a FW workaround Jeff Kirsher
2014-04-22 12:39 ` [net-next 07/16] i40e: Fix an issue with displaying IPv4 FD filters Jeff Kirsher
2014-04-22 12:39 ` [net-next 08/16] i40e/i40evf: add tracking to NVM busy state Jeff Kirsher
2014-04-22 12:39 ` Jeff Kirsher [this message]
2014-04-22 12:39 ` [net-next 10/16] i40e: prep vsi_open logic for non-netdev cases Jeff Kirsher
2014-04-22 12:39 ` [net-next 11/16] i40e: abstract the close path for better netdev vsis Jeff Kirsher
2014-04-22 12:39 ` [net-next 12/16] i40e: use generic vsi_open to unquiesce vsi Jeff Kirsher
2014-04-22 12:39 ` [net-next 13/16] i40e: rework fdir setup and teardown Jeff Kirsher
2014-04-22 12:39 ` [net-next 14/16] i40e: Cleanup if/else statements Jeff Kirsher
2014-04-22 12:39 ` [net-next 15/16] i40e: Tweak for-loop in i40e_ethtool.c Jeff Kirsher
2014-04-22 12:39 ` [net-next 16/16] i40e/i40evf: Bump build versions Jeff Kirsher
2014-04-23 1:47 ` [net-next 00/16][pull request] Intel Wired LAN Driver Updates David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1398170371-3333-10-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=sassmann@redhat.com \
--cc=shannon.nelson@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.