From: "Michal Malý" <madcatxster@devoid-pointer.net>
To: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: dmitry.torokhov@gmail.com, jkosina@suse.cz, elias.vds@gmail.com,
anssi.hannula@iki.fi, simon@mungewell.org,
"Michal Malý" <madcatxster@devoid-pointer.net>
Subject: [PATCH v3 08/24] hid: Port hid-emsff to ff-memless-next
Date: Sat, 26 Apr 2014 13:57:45 +0200 [thread overview]
Message-ID: <1398513696-12626-9-git-send-email-madcatxster@devoid-pointer.net> (raw)
In-Reply-To: <1398513696-12626-1-git-send-email-madcatxster@devoid-pointer.net>
Port hid-emsff to ff-memless-next
Signed-off-by: Michal Malý <madcatxster@devoid-pointer.net>
---
drivers/hid/Kconfig | 2 +-
drivers/hid/hid-emsff.c | 38 ++++++++++++++++++++++++++------------
2 files changed, 27 insertions(+), 13 deletions(-)
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index e076627..a78b5d8 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -213,7 +213,7 @@ config DRAGONRISE_FF
config HID_EMS_FF
tristate "EMS Production Inc. force feedback support"
depends on HID
- select INPUT_FF_MEMLESS
+ select INPUT_FF_MEMLESS_NEXT
---help---
Say Y here if you want to enable force feedback support for devices by
EMS Production Ltd.
diff --git a/drivers/hid/hid-emsff.c b/drivers/hid/hid-emsff.c
index d82d75b..c0cbe50 100644
--- a/drivers/hid/hid-emsff.c
+++ b/drivers/hid/hid-emsff.c
@@ -24,30 +24,44 @@
#include <linux/hid.h>
#include <linux/input.h>
#include <linux/module.h>
+#include <linux/input/ff-memless-next.h>
#include "hid-ids.h"
+#define FF_UPDATE_RATE 50
+
struct emsff_device {
struct hid_report *report;
};
static int emsff_play(struct input_dev *dev, void *data,
- struct ff_effect *effect)
+ const struct mlnx_effect_command *command)
{
struct hid_device *hid = input_get_drvdata(dev);
struct emsff_device *emsff = data;
+ const struct mlnx_rumble_force *rumble_force = &command->u.rumble_force;
int weak, strong;
- weak = effect->u.rumble.weak_magnitude;
- strong = effect->u.rumble.strong_magnitude;
-
- dbg_hid("called with 0x%04x 0x%04x\n", strong, weak);
-
- weak = weak * 0xff / 0xffff;
- strong = strong * 0xff / 0xffff;
-
- emsff->report->field[0]->value[1] = weak;
- emsff->report->field[0]->value[2] = strong;
+ switch (command->cmd) {
+ case MLNX_START_RUMBLE:
+ weak = rumble_force->weak;
+ strong = rumble_force->strong;
+
+ dbg_hid("called with 0x%04x 0x%04x\n", strong, weak);
+
+ weak = weak * 0xff / 0xffff;
+ strong = strong * 0xff / 0xffff;
+
+ emsff->report->field[0]->value[1] = weak;
+ emsff->report->field[0]->value[2] = strong;
+ break;
+ case MLNX_STOP_RUMBLE:
+ weak = 0;
+ strong = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
dbg_hid("running with 0x%02x 0x%02x\n", strong, weak);
hid_hw_request(hid, emsff->report, HID_REQ_SET_REPORT);
@@ -88,7 +102,7 @@ static int emsff_init(struct hid_device *hid)
set_bit(FF_RUMBLE, dev->ffbit);
- error = input_ff_create_memless(dev, emsff, emsff_play);
+ error = input_ff_create_mlnx(dev, emsff, emsff_play, FF_UPDATE_RATE);
if (error) {
kfree(emsff);
return error;
--
1.9.2
next prev parent reply other threads:[~2014-04-26 11:57 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-26 11:57 [PATCH v3 00/24] input: Introduce ff-memless-next as an improved replacement for ff-memless Michal Malý
2014-04-26 11:57 ` Michal Malý
2014-04-26 11:57 ` [PATCH v3 01/24] input: Add ff-memless-next module Michal Malý
2014-04-26 11:57 ` Michal Malý
2014-04-26 13:07 ` Antonio Ospite
2014-04-26 13:07 ` Antonio Ospite
2014-04-26 15:04 ` Michal Malý
2014-04-26 11:57 ` [PATCH v3 02/24] input: Port arizona-haptics to ff-memless-next Michal Malý
2014-04-26 11:57 ` [PATCH v3 03/24] input: Port twl4030-vibra " Michal Malý
2014-04-26 11:57 ` [PATCH v4 04/24] input: Port twl6040-vibra " Michal Malý
2014-04-26 11:57 ` [PATCH v3 05/24] input: Port max8997_haptic " Michal Malý
2014-04-26 11:57 ` [PATCH v3 06/24] input: Port pm8xxx-vibrator " Michal Malý
2014-04-26 11:57 ` [PATCH v3 07/24] hid: Port hid-axff " Michal Malý
2014-04-26 11:57 ` Michal Malý [this message]
2014-04-26 11:57 ` [PATCH v3 09/24] hid: Port hid-dr " Michal Malý
2014-04-26 11:57 ` [PATCH v3 10/24] hid: Port hid-gaff " Michal Malý
2014-04-26 11:57 ` Michal Malý
2014-04-26 11:57 ` [PATCH v3 11/24] hid: Port hid-holtekff " Michal Malý
2014-04-26 11:57 ` [PATCH v3 12/24] hid: Port hid-lgff " Michal Malý
2014-04-26 11:57 ` [PATCH v3 13/24] hid: Port hid-lg3ff " Michal Malý
2014-04-26 11:57 ` [PATCH v3 14/24] hid: Port hid-pl " Michal Malý
2014-04-26 11:57 ` [PATCH v3 15/24] hid: Port hid-sjoy " Michal Malý
2014-04-26 11:57 ` [PATCH v3 16/24] hid: Port hid-sony " Michal Malý
2014-04-26 13:09 ` Antonio Ospite
2014-04-26 13:09 ` Antonio Ospite
2014-04-26 15:05 ` Michal Malý
2014-04-26 11:57 ` [PATCH v3 17/24] hid: Port hid-tmff " Michal Malý
2014-04-26 11:57 ` [PATCH v3 18/24] hid: Port hid-wiimote-modules " Michal Malý
2014-04-26 11:57 ` [PATCH v3 19/24] hid: Port hid-zpff " Michal Malý
2014-04-26 11:57 ` [PATCH v3 20/24] input: Port gamecon " Michal Malý
2014-04-26 11:57 ` [PATCH v3 21/24] input: Port xpad " Michal Malý
2014-04-26 11:57 ` [PATCH v3 22/24] hid: Port hid-lg2ff " Michal Malý
2014-04-26 11:58 ` [PATCH v3 23/24] hid: Port hid-lg4ff " Michal Malý
2014-04-26 13:50 ` Elias Vanderstuyft
2014-04-26 13:50 ` Elias Vanderstuyft
2014-04-26 11:58 ` [PATCH v3 24/24] input: Replace ff-memless with ff-memless-next Michal Malý
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1398513696-12626-9-git-send-email-madcatxster@devoid-pointer.net \
--to=madcatxster@devoid-pointer.net \
--cc=anssi.hannula@iki.fi \
--cc=dmitry.torokhov@gmail.com \
--cc=elias.vds@gmail.com \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=simon@mungewell.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.