From: Paul Bolle <pebolle@tiscali.nl>
To: Tony Lindgren <tony@atomide.com>, Russell King <linux@arm.linux.org.uk>
Cc: Felipe Balbi <balbi@ti.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] ARM: OMAP: replace checks for CONFIG_USB_GADGET_OMAP
Date: Thu, 15 May 2014 22:55:45 +0200 [thread overview]
Message-ID: <1400187345.11786.28.camel@x220> (raw)
Commit 193ab2a60700 ("usb: gadget: allow multiple gadgets to be built")
apparently required that checks for CONFIG_USB_GADGET_OMAP would be
replaced with checks for CONFIG_USB_OMAP. Do so now for the remaining
checks for CONFIG_USB_GADGET_OMAP, even though these checks have
basically been broken since v3.1.
Fixes: 193ab2a60700 ("usb: gadget: allow multiple gadgets to be built")
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
Also untested.
It seems efficient to also include the change to phy-isp1301-omap.c in
this patch (ie, not ship that as a separate patch).
arch/arm/mach-omap1/board-h2.c | 2 +-
arch/arm/mach-omap1/board-h3.c | 2 +-
arch/arm/mach-omap1/board-innovator.c | 2 +-
arch/arm/mach-omap1/board-osk.c | 2 +-
drivers/usb/phy/phy-isp1301-omap.c | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 65d2acb31498..57092bc7f4f1 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -346,7 +346,7 @@ static struct omap_usb_config h2_usb_config __initdata = {
/* usb1 has a Mini-AB port and external isp1301 transceiver */
.otg = 2,
-#ifdef CONFIG_USB_GADGET_OMAP
+#ifdef CONFIG_USB_OMAP
.hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
/* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */
#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 816ecd13f81e..c828aacf469a 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -366,7 +366,7 @@ static struct omap_usb_config h3_usb_config __initdata = {
/* usb1 has a Mini-AB port and external isp1301 transceiver */
.otg = 2,
-#ifdef CONFIG_USB_GADGET_OMAP
+#ifdef CONFIG_USB_OMAP
.hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index bd5f02e9c354..1652ead0effa 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -312,7 +312,7 @@ static struct omap_usb_config h2_usb_config __initdata = {
/* usb1 has a Mini-AB port and external isp1301 transceiver */
.otg = 2,
-#ifdef CONFIG_USB_GADGET_OMAP
+#ifdef CONFIG_USB_OMAP
.hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
/* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */
#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 3a0262156e93..70b1b282e5c2 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -283,7 +283,7 @@ static struct omap_usb_config osk_usb_config __initdata = {
* be used, with a NONSTANDARD gender-bending cable/dongle, as
* a peripheral.
*/
-#ifdef CONFIG_USB_GADGET_OMAP
+#ifdef CONFIG_USB_OMAP
.register_dev = 1,
.hmc_mode = 0,
#else
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index 6e146d723b37..1ea6a0c30040 100644
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -1295,7 +1295,7 @@ isp1301_set_host(struct usb_otg *otg, struct usb_bus *host)
return isp1301_otg_enable(isp);
return 0;
-#elif !defined(CONFIG_USB_GADGET_OMAP)
+#elif !defined(CONFIG_USB_OMAP)
// FIXME update its refcount
otg->host = host;
--
1.9.0
WARNING: multiple messages have this Message-ID (diff)
From: pebolle@tiscali.nl (Paul Bolle)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: OMAP: replace checks for CONFIG_USB_GADGET_OMAP
Date: Thu, 15 May 2014 22:55:45 +0200 [thread overview]
Message-ID: <1400187345.11786.28.camel@x220> (raw)
Commit 193ab2a60700 ("usb: gadget: allow multiple gadgets to be built")
apparently required that checks for CONFIG_USB_GADGET_OMAP would be
replaced with checks for CONFIG_USB_OMAP. Do so now for the remaining
checks for CONFIG_USB_GADGET_OMAP, even though these checks have
basically been broken since v3.1.
Fixes: 193ab2a60700 ("usb: gadget: allow multiple gadgets to be built")
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
Also untested.
It seems efficient to also include the change to phy-isp1301-omap.c in
this patch (ie, not ship that as a separate patch).
arch/arm/mach-omap1/board-h2.c | 2 +-
arch/arm/mach-omap1/board-h3.c | 2 +-
arch/arm/mach-omap1/board-innovator.c | 2 +-
arch/arm/mach-omap1/board-osk.c | 2 +-
drivers/usb/phy/phy-isp1301-omap.c | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 65d2acb31498..57092bc7f4f1 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -346,7 +346,7 @@ static struct omap_usb_config h2_usb_config __initdata = {
/* usb1 has a Mini-AB port and external isp1301 transceiver */
.otg = 2,
-#ifdef CONFIG_USB_GADGET_OMAP
+#ifdef CONFIG_USB_OMAP
.hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
/* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */
#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 816ecd13f81e..c828aacf469a 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -366,7 +366,7 @@ static struct omap_usb_config h3_usb_config __initdata = {
/* usb1 has a Mini-AB port and external isp1301 transceiver */
.otg = 2,
-#ifdef CONFIG_USB_GADGET_OMAP
+#ifdef CONFIG_USB_OMAP
.hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index bd5f02e9c354..1652ead0effa 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -312,7 +312,7 @@ static struct omap_usb_config h2_usb_config __initdata = {
/* usb1 has a Mini-AB port and external isp1301 transceiver */
.otg = 2,
-#ifdef CONFIG_USB_GADGET_OMAP
+#ifdef CONFIG_USB_OMAP
.hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
/* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */
#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 3a0262156e93..70b1b282e5c2 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -283,7 +283,7 @@ static struct omap_usb_config osk_usb_config __initdata = {
* be used, with a NONSTANDARD gender-bending cable/dongle, as
* a peripheral.
*/
-#ifdef CONFIG_USB_GADGET_OMAP
+#ifdef CONFIG_USB_OMAP
.register_dev = 1,
.hmc_mode = 0,
#else
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index 6e146d723b37..1ea6a0c30040 100644
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -1295,7 +1295,7 @@ isp1301_set_host(struct usb_otg *otg, struct usb_bus *host)
return isp1301_otg_enable(isp);
return 0;
-#elif !defined(CONFIG_USB_GADGET_OMAP)
+#elif !defined(CONFIG_USB_OMAP)
// FIXME update its refcount
otg->host = host;
--
1.9.0
next reply other threads:[~2014-05-15 20:55 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-15 20:55 Paul Bolle [this message]
2014-05-15 20:55 ` [PATCH] ARM: OMAP: replace checks for CONFIG_USB_GADGET_OMAP Paul Bolle
2014-05-15 23:12 ` Felipe Balbi
2014-05-15 23:12 ` Felipe Balbi
2014-05-15 23:12 ` Felipe Balbi
2014-05-16 9:36 ` Paul Bolle
2014-05-16 9:36 ` Paul Bolle
2014-05-16 10:00 ` [PATCH v2] " Paul Bolle
2014-05-16 10:00 ` Paul Bolle
2014-05-16 21:15 ` Tony Lindgren
2014-05-16 21:15 ` Tony Lindgren
2014-05-16 21:15 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400187345.11786.28.camel@x220 \
--to=pebolle@tiscali.nl \
--cc=balbi@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.