All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Boyd <sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/7] clk: qcom: Fix mmcc-8974's PLL configurations
Date: Fri, 16 May 2014 16:07:09 -0700	[thread overview]
Message-ID: <1400281634-9313-3-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1400281634-9313-1-git-send-email-sboyd@codeaurora.org>

We forgot to add the status bit for the PLLs and we were using
the wrong register and masks for configuration, leading to
unexpected PLL configurations. Fix this.

Fixes: d8b212014e69 (clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC))
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/qcom/mmcc-msm8974.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c
index 60b7c24a5cd6..62200bbc759e 100644
--- a/drivers/clk/qcom/mmcc-msm8974.c
+++ b/drivers/clk/qcom/mmcc-msm8974.c
@@ -170,6 +170,7 @@ static struct clk_pll mmpll0 = {
 	.config_reg = 0x0014,
 	.mode_reg = 0x0000,
 	.status_reg = 0x001c,
+	.status_bit = 17,
         .clkr.hw.init = &(struct clk_init_data){
                 .name = "mmpll0",
                 .parent_names = (const char *[]){ "xo" },
@@ -193,9 +194,10 @@ static struct clk_pll mmpll1 = {
 	.l_reg = 0x0044,
 	.m_reg = 0x0048,
 	.n_reg = 0x004c,
-	.config_reg = 0x0054,
+	.config_reg = 0x0050,
 	.mode_reg = 0x0040,
 	.status_reg = 0x005c,
+	.status_bit = 17,
         .clkr.hw.init = &(struct clk_init_data){
                 .name = "mmpll1",
                 .parent_names = (const char *[]){ "xo" },
@@ -219,7 +221,7 @@ static struct clk_pll mmpll2 = {
 	.l_reg = 0x4104,
 	.m_reg = 0x4108,
 	.n_reg = 0x410c,
-	.config_reg = 0x4114,
+	.config_reg = 0x4110,
 	.mode_reg = 0x4100,
 	.status_reg = 0x411c,
         .clkr.hw.init = &(struct clk_init_data){
@@ -234,9 +236,10 @@ static struct clk_pll mmpll3 = {
 	.l_reg = 0x0084,
 	.m_reg = 0x0088,
 	.n_reg = 0x008c,
-	.config_reg = 0x0094,
+	.config_reg = 0x0090,
 	.mode_reg = 0x0080,
 	.status_reg = 0x009c,
+	.status_bit = 17,
         .clkr.hw.init = &(struct clk_init_data){
                 .name = "mmpll3",
                 .parent_names = (const char *[]){ "xo" },
@@ -2319,7 +2322,7 @@ static const struct pll_config mmpll1_config = {
 	.vco_val = 0x0,
 	.vco_mask = 0x3 << 20,
 	.pre_div_val = 0x0,
-	.pre_div_mask = 0x3 << 12,
+	.pre_div_mask = 0x7 << 12,
 	.post_div_val = 0x0,
 	.post_div_mask = 0x3 << 8,
 	.mn_ena_mask = BIT(24),
@@ -2333,7 +2336,7 @@ static struct pll_config mmpll3_config = {
 	.vco_val = 0x0,
 	.vco_mask = 0x3 << 20,
 	.pre_div_val = 0x0,
-	.pre_div_mask = 0x3 << 12,
+	.pre_div_mask = 0x7 << 12,
 	.post_div_val = 0x0,
 	.post_div_mask = 0x3 << 8,
 	.mn_ena_mask = BIT(24),
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

WARNING: multiple messages have this Message-ID (diff)
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/7] clk: qcom: Fix mmcc-8974's PLL configurations
Date: Fri, 16 May 2014 16:07:09 -0700	[thread overview]
Message-ID: <1400281634-9313-3-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1400281634-9313-1-git-send-email-sboyd@codeaurora.org>

We forgot to add the status bit for the PLLs and we were using
the wrong register and masks for configuration, leading to
unexpected PLL configurations. Fix this.

Fixes: d8b212014e69 (clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC))
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/qcom/mmcc-msm8974.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c
index 60b7c24a5cd6..62200bbc759e 100644
--- a/drivers/clk/qcom/mmcc-msm8974.c
+++ b/drivers/clk/qcom/mmcc-msm8974.c
@@ -170,6 +170,7 @@ static struct clk_pll mmpll0 = {
 	.config_reg = 0x0014,
 	.mode_reg = 0x0000,
 	.status_reg = 0x001c,
+	.status_bit = 17,
         .clkr.hw.init = &(struct clk_init_data){
                 .name = "mmpll0",
                 .parent_names = (const char *[]){ "xo" },
@@ -193,9 +194,10 @@ static struct clk_pll mmpll1 = {
 	.l_reg = 0x0044,
 	.m_reg = 0x0048,
 	.n_reg = 0x004c,
-	.config_reg = 0x0054,
+	.config_reg = 0x0050,
 	.mode_reg = 0x0040,
 	.status_reg = 0x005c,
+	.status_bit = 17,
         .clkr.hw.init = &(struct clk_init_data){
                 .name = "mmpll1",
                 .parent_names = (const char *[]){ "xo" },
@@ -219,7 +221,7 @@ static struct clk_pll mmpll2 = {
 	.l_reg = 0x4104,
 	.m_reg = 0x4108,
 	.n_reg = 0x410c,
-	.config_reg = 0x4114,
+	.config_reg = 0x4110,
 	.mode_reg = 0x4100,
 	.status_reg = 0x411c,
         .clkr.hw.init = &(struct clk_init_data){
@@ -234,9 +236,10 @@ static struct clk_pll mmpll3 = {
 	.l_reg = 0x0084,
 	.m_reg = 0x0088,
 	.n_reg = 0x008c,
-	.config_reg = 0x0094,
+	.config_reg = 0x0090,
 	.mode_reg = 0x0080,
 	.status_reg = 0x009c,
+	.status_bit = 17,
         .clkr.hw.init = &(struct clk_init_data){
                 .name = "mmpll3",
                 .parent_names = (const char *[]){ "xo" },
@@ -2319,7 +2322,7 @@ static const struct pll_config mmpll1_config = {
 	.vco_val = 0x0,
 	.vco_mask = 0x3 << 20,
 	.pre_div_val = 0x0,
-	.pre_div_mask = 0x3 << 12,
+	.pre_div_mask = 0x7 << 12,
 	.post_div_val = 0x0,
 	.post_div_mask = 0x3 << 8,
 	.mn_ena_mask = BIT(24),
@@ -2333,7 +2336,7 @@ static struct pll_config mmpll3_config = {
 	.vco_val = 0x0,
 	.vco_mask = 0x3 << 20,
 	.pre_div_val = 0x0,
-	.pre_div_mask = 0x3 << 12,
+	.pre_div_mask = 0x7 << 12,
 	.post_div_val = 0x0,
 	.post_div_mask = 0x3 << 8,
 	.mn_ena_mask = BIT(24),
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

  parent reply	other threads:[~2014-05-16 23:07 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-16 23:07 [PATCH 0/7] qcom clock updates Stephen Boyd
2014-05-16 23:07 ` Stephen Boyd
2014-05-16 23:07 ` Stephen Boyd
2014-05-16 23:07 ` [PATCH 1/7] clk: qcom: Fix clk_rcg2_is_enabled() check Stephen Boyd
2014-05-16 23:07   ` Stephen Boyd
2014-05-16 23:07 ` Stephen Boyd [this message]
2014-05-16 23:07   ` [PATCH 2/7] clk: qcom: Fix mmcc-8974's PLL configurations Stephen Boyd
2014-05-16 23:07 ` [PATCH 3/7] clk: qcom: Return highest rate when round_rate() exceeds plan Stephen Boyd
2014-05-16 23:07   ` Stephen Boyd
2014-05-16 23:07 ` [PATCH 4/7] clk: qcom: Support display RCG clocks Stephen Boyd
2014-05-16 23:07   ` Stephen Boyd
2014-05-16 23:07 ` [PATCH 5/7] clk: qcom: Properly support display clocks on msm8974 Stephen Boyd
2014-05-16 23:07   ` Stephen Boyd
2014-05-16 23:07   ` Stephen Boyd
2014-05-16 23:07 ` [PATCH 6/7] clk: qcom: Support msm8974pro global clock control hardware Stephen Boyd
2014-05-16 23:07   ` Stephen Boyd
2014-05-16 23:07 ` [PATCH 7/7] clk: qcom: Return error pointers for unimplemented clocks Stephen Boyd
2014-05-16 23:07   ` Stephen Boyd
2014-05-16 23:07   ` Stephen Boyd
2014-05-29  4:53 ` [PATCH 0/7] qcom clock updates Mike Turquette
2014-05-29  4:53   ` Mike Turquette

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1400281634-9313-3-git-send-email-sboyd@codeaurora.org \
    --to=sboyd@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.