* Problem using unix source in do_compile [not found] <1946107905.7106433.1448198721454.JavaMail.yahoo.ref@mail.yahoo.com> @ 2015-11-22 13:25 ` Edward Vidal 2015-11-22 22:34 ` Paul Eggleton 0 siblings, 1 reply; 7+ messages in thread From: Edward Vidal @ 2015-11-22 13:25 UTC (permalink / raw) To: yocto@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 1211 bytes --] Hi all,I am trying to use run the bitbake on a recipe that in the do_compile uses the unix command source.This is the error that I am getting. Log data follows:| DEBUG: Executing shell function do_compile | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.25492: 112: /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.25492: source: not found | WARNING: exit code 127 from a shell command. | ERROR: Function failed: do_compile (log file is located at /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/log.do_compile.25492)At github I have the original inc file that is used by the recipe fpga-image-adi.bb 87a75850b6f36bf1f09ac0f071587629ba630c1ehttps://github.com/develone/zedboard_yocto/commits/master/fpga-image.inc I made some changes which allows me to manually run the Xilinx commands and then re-run the bitbake fpga-image-adithe version e199e9ce0806dc257fcafdda26de29f4cd443e24regards, Edward Vidal Jr. e-mail develone@sbcglobal.net 915-595-1613 [-- Attachment #2: Type: text/html, Size: 3053 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Problem using unix source in do_compile 2015-11-22 13:25 ` Problem using unix source in do_compile Edward Vidal @ 2015-11-22 22:34 ` Paul Eggleton 2015-11-23 19:08 ` Edward Vidal 0 siblings, 1 reply; 7+ messages in thread From: Paul Eggleton @ 2015-11-22 22:34 UTC (permalink / raw) To: Edward Vidal; +Cc: yocto Hi Edward, On Sunday 22 November 2015 13:25:21 Edward Vidal wrote: > Hi all,I am trying to use run the bitbake on a recipe that in the > do_compile uses the unix command source.This is the error that I am > getting. Log data follows:| DEBUG: Executing shell function do_compile > > | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueab > | i/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.25492: 112: > | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnuea > | bi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.25492: > | source: not found WARNING: exit code 127 from a shell command. > | ERROR: Function failed: do_compile (log file is located at > | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnuea > | bi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/log.do_compile.25492)At > | github I have the original inc file that is used by the recipe > | fpga-image-adi.bb > 87a75850b6f36bf1f09ac0f071587629ba630c1ehttps://github.com/develone/zedboard > _yocto/commits/master/fpga-image.inc I made some changes which allows me to > manually run the Xilinx commands and then re-run the bitbake > fpga-image-adithe version e199e9ce0806dc257fcafdda26de29f4cd443e24 If I had to guess I'd say you're on Ubuntu or another system where /bin/sh is dash and not bash, is that correct? If so, "source" is a bash-specific command - the POSIX standard equivalent is '.' (without quotes), so you'll need to use that instead. Cheers, Paul -- Paul Eggleton Intel Open Source Technology Centre ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Problem using unix source in do_compile 2015-11-22 22:34 ` Paul Eggleton @ 2015-11-23 19:08 ` Edward Vidal 2015-11-23 19:41 ` Paul Eggleton 0 siblings, 1 reply; 7+ messages in thread From: Edward Vidal @ 2015-11-23 19:08 UTC (permalink / raw) To: Paul Eggleton; +Cc: yocto@yoctoproject.org [-- Attachment #1.1: Type: text/plain, Size: 4144 bytes --] Hello Paul, Thanks for your quick rely. Yes, I am running "ubuntu 12.04 x86_64". In a shell before or after running ". oe-init-build-env" either of these 2 commands below work okay."source /opt/Xilinx/14.6/ISE_DS/settings64.sh" or ". /opt/Xilinx/14.6/ISE_DS/settings64.sh" I am able to run (Xilinx Platform Studio) "xps" okay. I replaced 4 of source cmds with '.' Now I get the following error when I execute "bitbake fpga-image-adi" ERROR: Function failed: do_compile (log file is located at /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/log.do_compile.12830) ERROR: Logfile of failure stored in: /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/log.do_compile.12830 Log data follows: | DEBUG: Executing shell function do_compile | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.12830: 12: [: /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.12830: unexpected operator | . /opt/Xilinx/14.6/ISE_DS/common/.settings64.sh /opt/Xilinx/14.6/ISE_DS/common | . /opt/Xilinx/14.6/ISE_DS/EDK/.settings64.sh /opt/Xilinx/14.6/ISE_DS/EDK | . /opt/Xilinx/14.6/ISE_DS/PlanAhead/.settings64.sh /opt/Xilinx/14.6/ISE_DS/PlanAhead | . /opt/Xilinx/14.6/ISE_DS/ISE/.settings64.sh /opt/Xilinx/14.6/ISE_DS/ISE | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.12830: 113: /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.12830: xps: not found | WARNING: exit code 127 from a shell command. | ERROR: Function failed: do_compile (log file is located at /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/log.do_compile.12830) ERROR: Task 6 (/home/vidal/POKY/dora_build/poky/meta-topic/recipes-bsp/fpga/fpga-image-adi.bb, do_compile) failed with exit code '1' What is the unexpected operator?I am attaching the log file. Thanks in advance for any and all help.Regards, Edward Vidal Jr. e-mail develone@sbcglobal.net 915-595-1613 On Sunday, November 22, 2015 3:35 PM, Paul Eggleton <paul.eggleton@linux.intel.com> wrote: Hi Edward, On Sunday 22 November 2015 13:25:21 Edward Vidal wrote: > Hi all,I am trying to use run the bitbake on a recipe that in the > do_compile uses the unix command source.This is the error that I am > getting. Log data follows:| DEBUG: Executing shell function do_compile > > | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueab > | i/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.25492: 112: > | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnuea > | bi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.25492: > | source: not found WARNING: exit code 127 from a shell command. > | ERROR: Function failed: do_compile (log file is located at > | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnuea > | bi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/log.do_compile.25492)At > | github I have the original inc file that is used by the recipe > | fpga-image-adi.bb > 87a75850b6f36bf1f09ac0f071587629ba630c1ehttps://github.com/develone/zedboard > _yocto/commits/master/fpga-image.inc I made some changes which allows me to > manually run the Xilinx commands and then re-run the bitbake > fpga-image-adithe version e199e9ce0806dc257fcafdda26de29f4cd443e24 If I had to guess I'd say you're on Ubuntu or another system where /bin/sh is dash and not bash, is that correct? If so, "source" is a bash-specific command - the POSIX standard equivalent is '.' (without quotes), so you'll need to use that instead. Cheers, Paul -- Paul Eggleton Intel Open Source Technology Centre [-- Attachment #1.2: Type: text/html, Size: 8182 bytes --] [-- Attachment #2: log.do_compile.12830 --] [-- Type: application/octet-stream, Size: 1214 bytes --] DEBUG: Executing shell function do_compile /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.12830: 12: [: /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.12830: unexpected operator . /opt/Xilinx/14.6/ISE_DS/common/.settings64.sh /opt/Xilinx/14.6/ISE_DS/common . /opt/Xilinx/14.6/ISE_DS/EDK/.settings64.sh /opt/Xilinx/14.6/ISE_DS/EDK . /opt/Xilinx/14.6/ISE_DS/PlanAhead/.settings64.sh /opt/Xilinx/14.6/ISE_DS/PlanAhead . /opt/Xilinx/14.6/ISE_DS/ISE/.settings64.sh /opt/Xilinx/14.6/ISE_DS/ISE /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.12830: 113: /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.12830: xps: not found WARNING: exit code 127 from a shell command. ERROR: Function failed: do_compile (log file is located at /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/log.do_compile.12830) ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Problem using unix source in do_compile 2015-11-23 19:08 ` Edward Vidal @ 2015-11-23 19:41 ` Paul Eggleton 0 siblings, 0 replies; 7+ messages in thread From: Paul Eggleton @ 2015-11-23 19:41 UTC (permalink / raw) To: Edward Vidal; +Cc: yocto On Monday 23 November 2015 19:08:27 Edward Vidal wrote: > Edward Vidal Jr. e-mail develone@sbcglobal.net 915-595-1613 wrote: > On Sunday, November 22, 2015 3:35 PM, Paul Eggleton > <paul.eggleton@linux.intel.com> wrote: >> On Sunday 22 November 2015 13:25:21 Edward Vidal wrote: >> > Hi all,I am trying to use run the bitbake on a recipe that in the >> > do_compile uses the unix command source.This is the error that I am >> > getting. Log data follows:| DEBUG: Executing shell function do_compile >> > >> > | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux- >> > | gnue >> > | ab/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.25492: >> > | 112: /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky- >> > | linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858- >> > | r0/temp/run.do_compile.25492: >> > | source: not found WARNING: exit code 127 from a shell command. >> > | ERROR: Function failed: do_compile (log file is located at >> > | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux- >> > | gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858- >> > | r0/temp/log.do_compile.25492) >> > | At github I have the original inc file that is used by the recipe >> > | fpga-image-adi.bb >> > >> > 87a75850b6f36bf1f09ac0f071587629ba630c1ehttps://github.com/develone/zedboa >> > rd _yocto/commits/master/fpga-image.inc I made some changes which allows >> > me to manually run the Xilinx commands and then re-run the bitbake >> > fpga-image-adithe version e199e9ce0806dc257fcafdda26de29f4cd443e24 >> >> If I had to guess I'd say you're on Ubuntu or another system where /bin/sh >> is dash and not bash, is that correct? If so, "source" is a bash-specific >> command - the POSIX standard equivalent is '.' (without quotes), so you'll >> need to use that instead. > > Yes, I am running "ubuntu 12.04 x86_64". > > In a shell before or after running ". oe-init-build-env" either of these > 2 commands below work okay."source /opt/Xilinx/14.6/ISE_DS/settings64.sh" > or ". /opt/Xilinx/14.6/ISE_DS/settings64.sh" > > I am able to run (Xilinx Platform Studio) "xps" okay. > > I replaced 4 of source cmds with '.' > > Now I get the following error when I execute "bitbake fpga-image-adi" > > ERROR: Function failed: do_compile (log file is located at > /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi > /fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/log.do_compile.12830) ERROR: > Logfile of failure stored in: > /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi > /fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/log.do_compile.12830 > Log data follows: > | DEBUG: Executing shell function do_compile > | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueab > | i/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.12830: 12: [: > | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnuea > | bi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.12830: > | unexpected operator > | . /opt/Xilinx/14.6/ISE_DS/common/.settings64.sh > | /opt/Xilinx/14.6/ISE_DS/common . > | /opt/Xilinx/14.6/ISE_DS/EDK/.settings64.sh /opt/Xilinx/14.6/ISE_DS/EDK . > | /opt/Xilinx/14.6/ISE_DS/PlanAhead/.settings64.sh > | /opt/Xilinx/14.6/ISE_DS/PlanAhead . > | /opt/Xilinx/14.6/ISE_DS/ISE/.settings64.sh /opt/Xilinx/14.6/ISE_DS/ISE > | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnuea > | bi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.12830: 113: > | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnuea > | bi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.12830: > | xps: not found > | WARNING: exit code 127 from a shell command. > | ERROR: Function failed: do_compile (log file is located at > | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnuea > | bi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/log.do_compile.12830) > ERROR: Task 6 > (/home/vidal/POKY/dora_build/poky/meta-topic/recipes-bsp/fpga/fpga-image-ad > i.bb, do_compile) failed with exit code '1' What is the unexpected > operator? No idea I'm afraid. You are putting just one . <scriptfile> on the same line right? Cheers, Paul -- Paul Eggleton Intel Open Source Technology Centre ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <1721359978.8800564.1448508568109.JavaMail.yahoo.ref@mail.yahoo.com>]
* Re: Problem using unix source in do_compile [not found] <1721359978.8800564.1448508568109.JavaMail.yahoo.ref@mail.yahoo.com> @ 2015-11-26 3:29 ` Edward Vidal 2015-11-30 20:21 ` Khem Raj 0 siblings, 1 reply; 7+ messages in thread From: Edward Vidal @ 2015-11-26 3:29 UTC (permalink / raw) To: yocto@yoctoproject.org; +Cc: Paul Eggleton [-- Attachment #1: Type: text/plain, Size: 510 bytes --] Hello all,After a long time of trying to get Michael Looijmans fpga-image-adi.bb from meta-topic to work. I wanted to share the fix. I was running Ubuntu 12.04. which sh /bin/sh cd /bin ls -la sh lrwxrwxrwx 1 root root 4 May 16 2015 sh -> dash ln -sf bash shls -la /bin/sh lrwxrwxrwx 1 root root 4 Nov 25 17:28 /bin/sh -> bash which gmake /usr/bin/gmake cd /usr/bin ln -sf make gmake ls -la /usr/bin/gmakeThanks for all the help. Edward Vidal Jr. e-mail develone@sbcglobal.net 915-595-1613 [-- Attachment #2: Type: text/html, Size: 1997 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Problem using unix source in do_compile 2015-11-26 3:29 ` Edward Vidal @ 2015-11-30 20:21 ` Khem Raj 2015-12-01 23:39 ` Edward Vidal 0 siblings, 1 reply; 7+ messages in thread From: Khem Raj @ 2015-11-30 20:21 UTC (permalink / raw) To: Edward Vidal; +Cc: yocto, Paul Eggleton [-- Attachment #1: Type: text/plain, Size: 958 bytes --] On Nov 25, 2015 7:30 PM, "Edward Vidal" <develone@sbcglobal.net> wrote: > > Hello all, > After a long time of trying to get Michael Looijmans fpga-image-adi.bb from meta-topic to work. I wanted to share the fix. I was running Ubuntu 12.04. > which sh > /bin/sh > cd /bin > ls -la sh > lrwxrwxrwx 1 root root 4 May 16 2015 sh -> dash > ln -sf bash sh > ls -la /bin/sh > lrwxrwxrwx 1 root root 4 Nov 25 17:28 /bin/sh -> bash > which gmake > /usr/bin/gmake > cd /usr/bin > ln -sf make gmake > ls -la /usr/bin/gmake > Thanks for all the help. There are better ways to switch default sh to be bash or dash dpkg-reconfigure dash would offer you the selection choice. But why did you not try Paul's suggestions > > Edward Vidal Jr. e-mail develone@sbcglobal.net 915-595-1613 > > -- > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > [-- Attachment #2: Type: text/html, Size: 1440 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Problem using unix source in do_compile 2015-11-30 20:21 ` Khem Raj @ 2015-12-01 23:39 ` Edward Vidal 0 siblings, 0 replies; 7+ messages in thread From: Edward Vidal @ 2015-12-01 23:39 UTC (permalink / raw) To: Khem Raj; +Cc: yocto@yoctoproject.org, Paul Eggleton [-- Attachment #1: Type: text/plain, Size: 2340 bytes --] Kherm, I did follow Paul recommendations. The issue was not just using the source unix command. When I changed source to '.', a new error occurred. do_compile) failed with exit code '1' What is the unexpected > operator? This error was caused by not having a gmake. Searching to resolve the gmake issue, which some recommend linking to make. On this problem I have been working for quite some time. I don't now if this is related to dash bash issue or not. I was working on a Fedora system which uses bash. My binutils 2.23.2-r4 was most likely built on the Fedora system. I needed to switch to an O/S that support Xilinx Tools, so I copied my working tree to a Ubuntu system. I have removed from tmp down several times trying different things and bitbake core-image-sato rebuilds the tmp area. I wanted to remove from build, but then is when my binutils 2.23.2-r4 would failed. I had to restore my build/buildhistory build/cache build/conf build/sanity_info build/sstate-cache and then tmp was rebuilt with bitbake core-image-sato. I really do appreciate all the help that the folks on this mailing list and meta-xilinx mailing list. Thanks for all the help, Edward Vidal Jr. e-mail develone@sbcglobal.net 915-595-1613 On Monday, November 30, 2015 1:21 PM, Khem Raj <raj.khem@gmail.com> wrote: On Nov 25, 2015 7:30 PM, "Edward Vidal" <develone@sbcglobal.net> wrote: > > Hello all, > After a long time of trying to get Michael Looijmans fpga-image-adi.bb from meta-topic to work. I wanted to share the fix. I was running Ubuntu 12.04. > which sh > /bin/sh > cd /bin > ls -la sh > lrwxrwxrwx 1 root root 4 May 16 2015 sh -> dash > ln -sf bash sh > ls -la /bin/sh > lrwxrwxrwx 1 root root 4 Nov 25 17:28 /bin/sh -> bash > which gmake > /usr/bin/gmake > cd /usr/bin > ln -sf make gmake > ls -la /usr/bin/gmake > Thanks for all the help.There are better ways to switch default sh to be bash or dash dpkg-reconfigure dash would offer you the selection choice. But why did you not try Paul's suggestions > > Edward Vidal Jr. e-mail develone@sbcglobal.net 915-595-1613 > > -- > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > [-- Attachment #2: Type: text/html, Size: 6113 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2015-12-01 23:42 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1946107905.7106433.1448198721454.JavaMail.yahoo.ref@mail.yahoo.com>
2015-11-22 13:25 ` Problem using unix source in do_compile Edward Vidal
2015-11-22 22:34 ` Paul Eggleton
2015-11-23 19:08 ` Edward Vidal
2015-11-23 19:41 ` Paul Eggleton
[not found] <1721359978.8800564.1448508568109.JavaMail.yahoo.ref@mail.yahoo.com>
2015-11-26 3:29 ` Edward Vidal
2015-11-30 20:21 ` Khem Raj
2015-12-01 23:39 ` Edward Vidal
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.