From: Stephen Boyd <sboyd@codeaurora.org>
To: linux-arm-msm@vger.kernel.org
Cc: Mike Turquette <mturquette@linaro.org>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [RFC/PATCH 06/12] clk: qcom: Add MSM8960's HFPLLs
Date: Tue, 24 Jun 2014 17:06:17 -0700 [thread overview]
Message-ID: <1403654783-7176-7-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1403654783-7176-1-git-send-email-sboyd@codeaurora.org>
Describe the HFPLLs present on MSM8960 devices.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/qcom/gcc-msm8960.c | 82 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 82 insertions(+)
diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
index f4ffd91901f8..d04fc99541e4 100644
--- a/drivers/clk/qcom/gcc-msm8960.c
+++ b/drivers/clk/qcom/gcc-msm8960.c
@@ -30,6 +30,7 @@
#include "clk-pll.h"
#include "clk-rcg.h"
#include "clk-branch.h"
+#include "clk-hfpll.h"
#include "reset.h"
static struct clk_pll pll3 = {
@@ -75,6 +76,84 @@ static struct clk_regmap pll8_vote = {
},
};
+static struct hfpll_data hfpll0_data = {
+ .mode_reg = 0x3200,
+ .l_reg = 0x3208,
+ .m_reg = 0x320c,
+ .n_reg = 0x3210,
+ .config_reg = 0x3204,
+ .status_reg = 0x321c,
+ .config_val = 0x7845c665,
+ .droop_reg = 0x3214,
+ .droop_val = 0x0108c000,
+ .min_rate = 600000000UL,
+ .max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll0 = {
+ .d = &hfpll0_data,
+ .clkr.hw.init = &(struct clk_init_data){
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .name = "hfpll0",
+ .ops = &clk_ops_hfpll,
+ .flags = CLK_IGNORE_UNUSED,
+ },
+ .lock = __SPIN_LOCK_UNLOCKED(hfpll0.lock),
+};
+
+static struct hfpll_data hfpll1_data = {
+ .mode_reg = 0x3300,
+ .l_reg = 0x3308,
+ .m_reg = 0x330c,
+ .n_reg = 0x3310,
+ .config_reg = 0x3304,
+ .status_reg = 0x331c,
+ .config_val = 0x7845c665,
+ .droop_reg = 0x3314,
+ .droop_val = 0x0108c000,
+ .min_rate = 600000000UL,
+ .max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll1 = {
+ .d = &hfpll1_data,
+ .clkr.hw.init = &(struct clk_init_data){
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .name = "hfpll1",
+ .ops = &clk_ops_hfpll,
+ .flags = CLK_IGNORE_UNUSED,
+ },
+ .lock = __SPIN_LOCK_UNLOCKED(hfpll1.lock),
+};
+
+static struct hfpll_data hfpll_l2_data = {
+ .mode_reg = 0x3400,
+ .l_reg = 0x3408,
+ .m_reg = 0x340c,
+ .n_reg = 0x3410,
+ .config_reg = 0x3404,
+ .status_reg = 0x341c,
+ .config_val = 0x7845c665,
+ .droop_reg = 0x3414,
+ .droop_val = 0x0108c000,
+ .min_rate = 600000000UL,
+ .max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll_l2 = {
+ .d = &hfpll_l2_data,
+ .clkr.hw.init = &(struct clk_init_data){
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .name = "hfpll_l2",
+ .ops = &clk_ops_hfpll,
+ .flags = CLK_IGNORE_UNUSED,
+ },
+ .lock = __SPIN_LOCK_UNLOCKED(hfpll_l2.lock),
+};
+
static struct clk_pll pll14 = {
.l_reg = 0x31c4,
.m_reg = 0x31c8,
@@ -2763,6 +2842,9 @@ static struct clk_regmap *gcc_msm8960_clks[] = {
[PMIC_ARB1_H_CLK] = &pmic_arb1_h_clk.clkr,
[PMIC_SSBI2_CLK] = &pmic_ssbi2_clk.clkr,
[RPM_MSG_RAM_H_CLK] = &rpm_msg_ram_h_clk.clkr,
+ [PLL9] = &hfpll0.clkr,
+ [PLL10] = &hfpll1.clkr,
+ [PLL12] = &hfpll_l2.clkr,
};
static const struct qcom_reset_map gcc_msm8960_resets[] = {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
WARNING: multiple messages have this Message-ID (diff)
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC/PATCH 06/12] clk: qcom: Add MSM8960's HFPLLs
Date: Tue, 24 Jun 2014 17:06:17 -0700 [thread overview]
Message-ID: <1403654783-7176-7-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1403654783-7176-1-git-send-email-sboyd@codeaurora.org>
Describe the HFPLLs present on MSM8960 devices.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/qcom/gcc-msm8960.c | 82 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 82 insertions(+)
diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
index f4ffd91901f8..d04fc99541e4 100644
--- a/drivers/clk/qcom/gcc-msm8960.c
+++ b/drivers/clk/qcom/gcc-msm8960.c
@@ -30,6 +30,7 @@
#include "clk-pll.h"
#include "clk-rcg.h"
#include "clk-branch.h"
+#include "clk-hfpll.h"
#include "reset.h"
static struct clk_pll pll3 = {
@@ -75,6 +76,84 @@ static struct clk_regmap pll8_vote = {
},
};
+static struct hfpll_data hfpll0_data = {
+ .mode_reg = 0x3200,
+ .l_reg = 0x3208,
+ .m_reg = 0x320c,
+ .n_reg = 0x3210,
+ .config_reg = 0x3204,
+ .status_reg = 0x321c,
+ .config_val = 0x7845c665,
+ .droop_reg = 0x3214,
+ .droop_val = 0x0108c000,
+ .min_rate = 600000000UL,
+ .max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll0 = {
+ .d = &hfpll0_data,
+ .clkr.hw.init = &(struct clk_init_data){
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .name = "hfpll0",
+ .ops = &clk_ops_hfpll,
+ .flags = CLK_IGNORE_UNUSED,
+ },
+ .lock = __SPIN_LOCK_UNLOCKED(hfpll0.lock),
+};
+
+static struct hfpll_data hfpll1_data = {
+ .mode_reg = 0x3300,
+ .l_reg = 0x3308,
+ .m_reg = 0x330c,
+ .n_reg = 0x3310,
+ .config_reg = 0x3304,
+ .status_reg = 0x331c,
+ .config_val = 0x7845c665,
+ .droop_reg = 0x3314,
+ .droop_val = 0x0108c000,
+ .min_rate = 600000000UL,
+ .max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll1 = {
+ .d = &hfpll1_data,
+ .clkr.hw.init = &(struct clk_init_data){
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .name = "hfpll1",
+ .ops = &clk_ops_hfpll,
+ .flags = CLK_IGNORE_UNUSED,
+ },
+ .lock = __SPIN_LOCK_UNLOCKED(hfpll1.lock),
+};
+
+static struct hfpll_data hfpll_l2_data = {
+ .mode_reg = 0x3400,
+ .l_reg = 0x3408,
+ .m_reg = 0x340c,
+ .n_reg = 0x3410,
+ .config_reg = 0x3404,
+ .status_reg = 0x341c,
+ .config_val = 0x7845c665,
+ .droop_reg = 0x3414,
+ .droop_val = 0x0108c000,
+ .min_rate = 600000000UL,
+ .max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll_l2 = {
+ .d = &hfpll_l2_data,
+ .clkr.hw.init = &(struct clk_init_data){
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .name = "hfpll_l2",
+ .ops = &clk_ops_hfpll,
+ .flags = CLK_IGNORE_UNUSED,
+ },
+ .lock = __SPIN_LOCK_UNLOCKED(hfpll_l2.lock),
+};
+
static struct clk_pll pll14 = {
.l_reg = 0x31c4,
.m_reg = 0x31c8,
@@ -2763,6 +2842,9 @@ static struct clk_regmap *gcc_msm8960_clks[] = {
[PMIC_ARB1_H_CLK] = &pmic_arb1_h_clk.clkr,
[PMIC_SSBI2_CLK] = &pmic_ssbi2_clk.clkr,
[RPM_MSG_RAM_H_CLK] = &rpm_msg_ram_h_clk.clkr,
+ [PLL9] = &hfpll0.clkr,
+ [PLL10] = &hfpll1.clkr,
+ [PLL12] = &hfpll_l2.clkr,
};
static const struct qcom_reset_map gcc_msm8960_resets[] = {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
WARNING: multiple messages have this Message-ID (diff)
From: Stephen Boyd <sboyd@codeaurora.org>
To: linux-arm-msm@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Mike Turquette <mturquette@linaro.org>
Subject: [RFC/PATCH 06/12] clk: qcom: Add MSM8960's HFPLLs
Date: Tue, 24 Jun 2014 17:06:17 -0700 [thread overview]
Message-ID: <1403654783-7176-7-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1403654783-7176-1-git-send-email-sboyd@codeaurora.org>
Describe the HFPLLs present on MSM8960 devices.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/qcom/gcc-msm8960.c | 82 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 82 insertions(+)
diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
index f4ffd91901f8..d04fc99541e4 100644
--- a/drivers/clk/qcom/gcc-msm8960.c
+++ b/drivers/clk/qcom/gcc-msm8960.c
@@ -30,6 +30,7 @@
#include "clk-pll.h"
#include "clk-rcg.h"
#include "clk-branch.h"
+#include "clk-hfpll.h"
#include "reset.h"
static struct clk_pll pll3 = {
@@ -75,6 +76,84 @@ static struct clk_regmap pll8_vote = {
},
};
+static struct hfpll_data hfpll0_data = {
+ .mode_reg = 0x3200,
+ .l_reg = 0x3208,
+ .m_reg = 0x320c,
+ .n_reg = 0x3210,
+ .config_reg = 0x3204,
+ .status_reg = 0x321c,
+ .config_val = 0x7845c665,
+ .droop_reg = 0x3214,
+ .droop_val = 0x0108c000,
+ .min_rate = 600000000UL,
+ .max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll0 = {
+ .d = &hfpll0_data,
+ .clkr.hw.init = &(struct clk_init_data){
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .name = "hfpll0",
+ .ops = &clk_ops_hfpll,
+ .flags = CLK_IGNORE_UNUSED,
+ },
+ .lock = __SPIN_LOCK_UNLOCKED(hfpll0.lock),
+};
+
+static struct hfpll_data hfpll1_data = {
+ .mode_reg = 0x3300,
+ .l_reg = 0x3308,
+ .m_reg = 0x330c,
+ .n_reg = 0x3310,
+ .config_reg = 0x3304,
+ .status_reg = 0x331c,
+ .config_val = 0x7845c665,
+ .droop_reg = 0x3314,
+ .droop_val = 0x0108c000,
+ .min_rate = 600000000UL,
+ .max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll1 = {
+ .d = &hfpll1_data,
+ .clkr.hw.init = &(struct clk_init_data){
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .name = "hfpll1",
+ .ops = &clk_ops_hfpll,
+ .flags = CLK_IGNORE_UNUSED,
+ },
+ .lock = __SPIN_LOCK_UNLOCKED(hfpll1.lock),
+};
+
+static struct hfpll_data hfpll_l2_data = {
+ .mode_reg = 0x3400,
+ .l_reg = 0x3408,
+ .m_reg = 0x340c,
+ .n_reg = 0x3410,
+ .config_reg = 0x3404,
+ .status_reg = 0x341c,
+ .config_val = 0x7845c665,
+ .droop_reg = 0x3414,
+ .droop_val = 0x0108c000,
+ .min_rate = 600000000UL,
+ .max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll_l2 = {
+ .d = &hfpll_l2_data,
+ .clkr.hw.init = &(struct clk_init_data){
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .name = "hfpll_l2",
+ .ops = &clk_ops_hfpll,
+ .flags = CLK_IGNORE_UNUSED,
+ },
+ .lock = __SPIN_LOCK_UNLOCKED(hfpll_l2.lock),
+};
+
static struct clk_pll pll14 = {
.l_reg = 0x31c4,
.m_reg = 0x31c8,
@@ -2763,6 +2842,9 @@ static struct clk_regmap *gcc_msm8960_clks[] = {
[PMIC_ARB1_H_CLK] = &pmic_arb1_h_clk.clkr,
[PMIC_SSBI2_CLK] = &pmic_ssbi2_clk.clkr,
[RPM_MSG_RAM_H_CLK] = &rpm_msg_ram_h_clk.clkr,
+ [PLL9] = &hfpll0.clkr,
+ [PLL10] = &hfpll1.clkr,
+ [PLL12] = &hfpll_l2.clkr,
};
static const struct qcom_reset_map gcc_msm8960_resets[] = {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
next prev parent reply other threads:[~2014-06-25 0:06 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-25 0:06 [RFC/PATCH 00/12] Krait clocks + Krait CPUfreq Stephen Boyd
2014-06-25 0:06 ` Stephen Boyd
2014-06-25 0:06 ` [RFC/PATCH 01/12] ARM: Add Krait L2 register accessor functions Stephen Boyd
2014-06-25 0:06 ` Stephen Boyd
2014-06-25 0:06 ` Stephen Boyd
2014-06-25 0:06 ` [RFC/PATCH 02/12] clk: Add safe switch hook Stephen Boyd
2014-06-25 0:06 ` Stephen Boyd
2014-07-29 6:05 ` Mike Turquette
2014-07-29 6:05 ` Mike Turquette
2014-07-29 8:59 ` Thomas Abraham
2014-07-29 8:59 ` Thomas Abraham
2014-09-10 1:44 ` dbasehore .
2014-09-10 1:44 ` dbasehore .
2014-06-25 0:06 ` [RFC/PATCH 03/12] clk: qcom: Add support for muxes, dividers, and mux dividers Stephen Boyd
2014-06-25 0:06 ` Stephen Boyd
2014-07-14 10:06 ` pramod gurav
2014-07-14 10:06 ` pramod gurav
2014-06-25 0:06 ` [RFC/PATCH 04/12] clk: qcom: Add support for High-Frequency PLLs (HFPLLs) Stephen Boyd
2014-06-25 0:06 ` Stephen Boyd
2014-06-25 0:06 ` [RFC/PATCH 05/12] clk: qcom: Add HFPLL driver Stephen Boyd
2014-06-25 0:06 ` Stephen Boyd
2014-06-25 0:06 ` Stephen Boyd [this message]
2014-06-25 0:06 ` [RFC/PATCH 06/12] clk: qcom: Add MSM8960's HFPLLs Stephen Boyd
2014-06-25 0:06 ` Stephen Boyd
2014-07-14 10:19 ` pramod gurav
2014-07-14 10:19 ` pramod gurav
2014-06-25 0:06 ` [RFC/PATCH 07/12] clk: qcom: Add support for Krait clocks Stephen Boyd
2014-06-25 0:06 ` Stephen Boyd
2014-06-25 0:06 ` [RFC/PATCH 08/12] clk: qcom: Add KPSS ACC/GCC driver Stephen Boyd
2014-06-25 0:06 ` Stephen Boyd
2014-06-25 0:06 ` [RFC/PATCH 09/12] clk: qcom: Add Krait clock controller driver Stephen Boyd
2014-06-25 0:06 ` Stephen Boyd
2014-07-14 10:25 ` pramod gurav
2014-07-14 10:25 ` pramod gurav
2014-06-25 0:06 ` [RFC/PATCH 10/12] cpufreq: Add a cpufreq-krait based on cpufreq-cpu0 Stephen Boyd
2014-06-25 0:06 ` Stephen Boyd
2014-06-25 0:52 ` Stephen Boyd
2014-06-25 0:52 ` Stephen Boyd
2014-06-25 8:47 ` Viresh Kumar
2014-06-25 8:47 ` Viresh Kumar
2014-06-25 0:06 ` [RFC/PATCH 11/12] cpufreq: Add module to register cpufreq-krait device Stephen Boyd
2014-06-25 0:06 ` Stephen Boyd
2014-06-25 0:06 ` [RFC/PATCH 12/12] ARM: dts: qcom: Add necessary DT data for Krait cpufreq Stephen Boyd
2014-06-25 0:06 ` Stephen Boyd
2014-07-15 10:33 ` [RFC/PATCH 00/12] Krait clocks + Krait CPUfreq pramod gurav
2014-07-15 10:33 ` pramod gurav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403654783-7176-7-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.