From: deepak.s@linux.intel.com
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH v2 1/3] drm/i915: CHV GPU frequency to opcode functions
Date: Sat, 12 Jul 2014 14:54:33 +0530 [thread overview]
Message-ID: <1405157073-15248-1-git-send-email-deepak.s@linux.intel.com> (raw)
In-Reply-To: <1404978387-28180-1-git-send-email-deepak.s@linux.intel.com>
From: Deepak S <deepak.s@linux.intel.com>
Adding chv specific fre/encode conversion.
v2: Remove generic function and platform check (Daniel)
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
---
drivers/gpu/drm/i915/intel_pm.c | 78 +++++++++++++++++++++++++++++++++++++++--
1 file changed, 76 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 6892421..f673e1b 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -6931,7 +6931,7 @@ int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u8 mbox, u32 val)
return 0;
}
-int vlv_gpu_freq(struct drm_i915_private *dev_priv, int val)
+int byt_gpu_freq(struct drm_i915_private *dev_priv, int val)
{
int div;
@@ -6953,7 +6953,7 @@ int vlv_gpu_freq(struct drm_i915_private *dev_priv, int val)
return DIV_ROUND_CLOSEST(dev_priv->mem_freq * (val + 6 - 0xbd), 4 * div);
}
-int vlv_freq_opcode(struct drm_i915_private *dev_priv, int val)
+int byt_freq_opcode(struct drm_i915_private *dev_priv, int val)
{
int mul;
@@ -6975,6 +6975,80 @@ int vlv_freq_opcode(struct drm_i915_private *dev_priv, int val)
return DIV_ROUND_CLOSEST(4 * mul * val, dev_priv->mem_freq) + 0xbd - 6;
}
+int chv_gpu_freq(struct drm_i915_private *dev_priv, int val)
+{
+ int div, freq;
+
+ switch (dev_priv->rps.cz_freq) {
+ case 200:
+ div = 5;
+ break;
+ case 267:
+ div = 6;
+ break;
+ case 320:
+ case 333:
+ case 400:
+ div = 8;
+ break;
+ default:
+ return -1;
+ }
+
+ freq = (DIV_ROUND_CLOSEST((dev_priv->rps.cz_freq * val), 2 * div) / 2);
+
+ return freq;
+}
+
+int chv_freq_opcode(struct drm_i915_private *dev_priv, int val)
+{
+ int mul, opcode;
+
+ switch (dev_priv->rps.cz_freq) {
+ case 200:
+ mul = 5;
+ break;
+ case 267:
+ mul = 6;
+ break;
+ case 320:
+ case 333:
+ case 400:
+ mul = 8;
+ break;
+ default:
+ return -1;
+ }
+
+ opcode = (DIV_ROUND_CLOSEST((val * 2 * mul), dev_priv->rps.cz_freq) * 2);
+
+ return opcode;
+}
+
+int vlv_gpu_freq(struct drm_i915_private *dev_priv, int val)
+{
+ int ret = -1;
+
+ if (IS_CHERRYVIEW(dev_priv->dev))
+ ret = chv_gpu_freq(dev_priv, val);
+ else if (IS_VALLEYVIEW(dev_priv->dev))
+ ret = byt_gpu_freq(dev_priv, val);
+
+ return ret;
+}
+
+int vlv_freq_opcode(struct drm_i915_private *dev_priv, int val)
+{
+ int ret = -1;
+
+ if (IS_CHERRYVIEW(dev_priv->dev))
+ ret = chv_freq_opcode(dev_priv, val);
+ else if (IS_VALLEYVIEW(dev_priv->dev))
+ ret = byt_freq_opcode(dev_priv, val);
+
+ return ret;
+}
+
void intel_pm_setup(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
--
1.9.1
next prev parent reply other threads:[~2014-07-11 9:29 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-10 7:46 [PATCH 0/7] Enable RP1/RPn/RP0 sysfs and enable CHV PM interrupt deepak.s
2014-07-10 7:46 ` [PATCH 1/7] drm/i915: Read guaranteed freq for valleyview deepak.s
2014-07-11 14:42 ` Mika Kuoppala
2014-07-11 15:56 ` Daniel Vetter
2014-07-10 7:46 ` [PATCH 2/7] drm/i915: Add RP0/RP1/RPn render P state thresholds in VLV sysfs deepak.s
2014-07-11 14:44 ` Mika Kuoppala
2014-07-11 16:00 ` Daniel Vetter
2014-07-10 7:46 ` [PATCH 3/7] drm/i915: keep freq/opcode conversion function more generic deepak.s
2014-07-09 12:03 ` Daniel Vetter
2014-07-11 4:26 ` Deepak S
2014-07-10 6:28 ` Daniel Vetter
2014-07-11 6:50 ` Deepak S
2014-07-10 7:46 ` [PATCH 4/7] drm/i915: populate mem_freq/cz_clock for chv deepak.s
2014-07-11 14:50 ` Mika Kuoppala
2014-07-10 7:46 ` [PATCH 5/7] drm/i915: CHV GPU frequency to opcode functions deepak.s
2014-07-10 7:46 ` [PATCH 6/7] drm/i915/chv: Add basic PM interrupt support for CHV deepak.s
2014-07-11 15:03 ` Mika Kuoppala
2014-07-10 7:46 ` [PATCH 7/7] drm/i915: Add RP1 render P state thresholds in CHV deepak.s
2014-07-12 9:24 ` deepak.s [this message]
2014-07-11 15:53 ` [PATCH v2 1/3] drm/i915: CHV GPU frequency to opcode functions Mika Kuoppala
2014-07-11 15:58 ` Daniel Vetter
2014-07-12 13:16 ` [PATCH v2] drm/i915: Add RP1 render P state thresholds in CHV deepak.s
2014-07-11 16:07 ` Mika Kuoppala
2014-07-11 16:22 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1405157073-15248-1-git-send-email-deepak.s@linux.intel.com \
--to=deepak.s@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.