All of lore.kernel.org
 help / color / mirror / Atom feed
From: Antonio Quartulli <antonio@meshcoding.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, b.a.t.m.a.n@lists.open-mesh.org,
	"André Gaul" <gaul@web-yard.de>,
	"Marek Lindner" <mareklindner@neomailbox.ch>
Subject: [B.A.T.M.A.N.] [PATCH 2/4] batman-adv: remove unnecessary logspam
Date: Tue,  5 Aug 2014 09:36:26 +0200	[thread overview]
Message-ID: <1407224188-28626-3-git-send-email-antonio@meshcoding.com> (raw)
In-Reply-To: <1407224188-28626-1-git-send-email-antonio@meshcoding.com>

From: André Gaul <gaul@web-yard.de>

This patch removes unnecessary logspam which resulted from superfluous
calls to net_ratelimit(). With the supplied patch, net_ratelimit() is
called after the loglevel has been checked.

Signed-off-by: André Gaul <gaul@web-yard.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
---
 net/batman-adv/main.h    | 20 ++++++++++++++------
 net/batman-adv/routing.c | 18 +++++++++---------
 2 files changed, 23 insertions(+), 15 deletions(-)

diff --git a/net/batman-adv/main.h b/net/batman-adv/main.h
index 118b990..257840e 100644
--- a/net/batman-adv/main.h
+++ b/net/batman-adv/main.h
@@ -238,21 +238,29 @@ enum batadv_dbg_level {
 int batadv_debug_log(struct batadv_priv *bat_priv, const char *fmt, ...)
 __printf(2, 3);
 
-#define batadv_dbg(type, bat_priv, fmt, arg...)			\
+/* possibly ratelimited debug output */
+#define _batadv_dbg(type, bat_priv, ratelimited, fmt, arg...)	\
 	do {							\
-		if (atomic_read(&bat_priv->log_level) & type)	\
+		if (atomic_read(&bat_priv->log_level) & type && \
+		    (!ratelimited || net_ratelimit()))		\
 			batadv_debug_log(bat_priv, fmt, ## arg);\
 	}							\
 	while (0)
 #else /* !CONFIG_BATMAN_ADV_DEBUG */
-__printf(3, 4)
-static inline void batadv_dbg(int type __always_unused,
-			      struct batadv_priv *bat_priv __always_unused,
-			      const char *fmt __always_unused, ...)
+__printf(4, 5)
+static inline void _batadv_dbg(int type __always_unused,
+			       struct batadv_priv *bat_priv __always_unused,
+			       int ratelimited __always_unused,
+			       const char *fmt __always_unused, ...)
 {
 }
 #endif
 
+#define batadv_dbg(type, bat_priv, arg...) \
+	_batadv_dbg(type, bat_priv, 0, ## arg)
+#define batadv_dbg_ratelimited(type, bat_priv, arg...) \
+	_batadv_dbg(type, bat_priv, 1, ## arg)
+
 #define batadv_info(net_dev, fmt, arg...)				\
 	do {								\
 		struct net_device *_netdev = (net_dev);                 \
diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c
index 3514153..35f76f2 100644
--- a/net/batman-adv/routing.c
+++ b/net/batman-adv/routing.c
@@ -706,11 +706,11 @@ static int batadv_check_unicast_ttvn(struct batadv_priv *bat_priv,
 	if (batadv_tt_local_client_is_roaming(bat_priv, ethhdr->h_dest, vid)) {
 		if (batadv_reroute_unicast_packet(bat_priv, unicast_packet,
 						  ethhdr->h_dest, vid))
-			net_ratelimited_function(batadv_dbg, BATADV_DBG_TT,
-						 bat_priv,
-						 "Rerouting unicast packet to %pM (dst=%pM): Local Roaming\n",
-						 unicast_packet->dest,
-						 ethhdr->h_dest);
+			batadv_dbg_ratelimited(BATADV_DBG_TT,
+					       bat_priv,
+					       "Rerouting unicast packet to %pM (dst=%pM): Local Roaming\n",
+					       unicast_packet->dest,
+					       ethhdr->h_dest);
 		/* at this point the mesh destination should have been
 		 * substituted with the originator address found in the global
 		 * table. If not, let the packet go untouched anyway because
@@ -752,10 +752,10 @@ static int batadv_check_unicast_ttvn(struct batadv_priv *bat_priv,
 	 */
 	if (batadv_reroute_unicast_packet(bat_priv, unicast_packet,
 					  ethhdr->h_dest, vid)) {
-		net_ratelimited_function(batadv_dbg, BATADV_DBG_TT, bat_priv,
-					 "Rerouting unicast packet to %pM (dst=%pM): TTVN mismatch old_ttvn=%u new_ttvn=%u\n",
-					 unicast_packet->dest, ethhdr->h_dest,
-					 old_ttvn, curr_ttvn);
+		batadv_dbg_ratelimited(BATADV_DBG_TT, bat_priv,
+				       "Rerouting unicast packet to %pM (dst=%pM): TTVN mismatch old_ttvn=%u new_ttvn=%u\n",
+				       unicast_packet->dest, ethhdr->h_dest,
+				       old_ttvn, curr_ttvn);
 		return 1;
 	}
 
-- 
1.8.5.5


WARNING: multiple messages have this Message-ID (diff)
From: Antonio Quartulli <antonio@meshcoding.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, b.a.t.m.a.n@lists.open-mesh.org,
	"André Gaul" <gaul@web-yard.de>,
	"Marek Lindner" <mareklindner@neomailbox.ch>
Subject: [PATCH 2/4] batman-adv: remove unnecessary logspam
Date: Tue,  5 Aug 2014 09:36:26 +0200	[thread overview]
Message-ID: <1407224188-28626-3-git-send-email-antonio@meshcoding.com> (raw)
In-Reply-To: <1407224188-28626-1-git-send-email-antonio@meshcoding.com>

From: André Gaul <gaul@web-yard.de>

This patch removes unnecessary logspam which resulted from superfluous
calls to net_ratelimit(). With the supplied patch, net_ratelimit() is
called after the loglevel has been checked.

Signed-off-by: André Gaul <gaul@web-yard.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
---
 net/batman-adv/main.h    | 20 ++++++++++++++------
 net/batman-adv/routing.c | 18 +++++++++---------
 2 files changed, 23 insertions(+), 15 deletions(-)

diff --git a/net/batman-adv/main.h b/net/batman-adv/main.h
index 118b990..257840e 100644
--- a/net/batman-adv/main.h
+++ b/net/batman-adv/main.h
@@ -238,21 +238,29 @@ enum batadv_dbg_level {
 int batadv_debug_log(struct batadv_priv *bat_priv, const char *fmt, ...)
 __printf(2, 3);
 
-#define batadv_dbg(type, bat_priv, fmt, arg...)			\
+/* possibly ratelimited debug output */
+#define _batadv_dbg(type, bat_priv, ratelimited, fmt, arg...)	\
 	do {							\
-		if (atomic_read(&bat_priv->log_level) & type)	\
+		if (atomic_read(&bat_priv->log_level) & type && \
+		    (!ratelimited || net_ratelimit()))		\
 			batadv_debug_log(bat_priv, fmt, ## arg);\
 	}							\
 	while (0)
 #else /* !CONFIG_BATMAN_ADV_DEBUG */
-__printf(3, 4)
-static inline void batadv_dbg(int type __always_unused,
-			      struct batadv_priv *bat_priv __always_unused,
-			      const char *fmt __always_unused, ...)
+__printf(4, 5)
+static inline void _batadv_dbg(int type __always_unused,
+			       struct batadv_priv *bat_priv __always_unused,
+			       int ratelimited __always_unused,
+			       const char *fmt __always_unused, ...)
 {
 }
 #endif
 
+#define batadv_dbg(type, bat_priv, arg...) \
+	_batadv_dbg(type, bat_priv, 0, ## arg)
+#define batadv_dbg_ratelimited(type, bat_priv, arg...) \
+	_batadv_dbg(type, bat_priv, 1, ## arg)
+
 #define batadv_info(net_dev, fmt, arg...)				\
 	do {								\
 		struct net_device *_netdev = (net_dev);                 \
diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c
index 3514153..35f76f2 100644
--- a/net/batman-adv/routing.c
+++ b/net/batman-adv/routing.c
@@ -706,11 +706,11 @@ static int batadv_check_unicast_ttvn(struct batadv_priv *bat_priv,
 	if (batadv_tt_local_client_is_roaming(bat_priv, ethhdr->h_dest, vid)) {
 		if (batadv_reroute_unicast_packet(bat_priv, unicast_packet,
 						  ethhdr->h_dest, vid))
-			net_ratelimited_function(batadv_dbg, BATADV_DBG_TT,
-						 bat_priv,
-						 "Rerouting unicast packet to %pM (dst=%pM): Local Roaming\n",
-						 unicast_packet->dest,
-						 ethhdr->h_dest);
+			batadv_dbg_ratelimited(BATADV_DBG_TT,
+					       bat_priv,
+					       "Rerouting unicast packet to %pM (dst=%pM): Local Roaming\n",
+					       unicast_packet->dest,
+					       ethhdr->h_dest);
 		/* at this point the mesh destination should have been
 		 * substituted with the originator address found in the global
 		 * table. If not, let the packet go untouched anyway because
@@ -752,10 +752,10 @@ static int batadv_check_unicast_ttvn(struct batadv_priv *bat_priv,
 	 */
 	if (batadv_reroute_unicast_packet(bat_priv, unicast_packet,
 					  ethhdr->h_dest, vid)) {
-		net_ratelimited_function(batadv_dbg, BATADV_DBG_TT, bat_priv,
-					 "Rerouting unicast packet to %pM (dst=%pM): TTVN mismatch old_ttvn=%u new_ttvn=%u\n",
-					 unicast_packet->dest, ethhdr->h_dest,
-					 old_ttvn, curr_ttvn);
+		batadv_dbg_ratelimited(BATADV_DBG_TT, bat_priv,
+				       "Rerouting unicast packet to %pM (dst=%pM): TTVN mismatch old_ttvn=%u new_ttvn=%u\n",
+				       unicast_packet->dest, ethhdr->h_dest,
+				       old_ttvn, curr_ttvn);
 		return 1;
 	}
 
-- 
1.8.5.5

  parent reply	other threads:[~2014-08-05  7:36 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-05  7:36 [B.A.T.M.A.N.] pull request: batman-adv 2014-08-05 Antonio Quartulli
2014-08-05  7:36 ` Antonio Quartulli
2014-08-05  7:36 ` [B.A.T.M.A.N.] [PATCH 1/4] batman-adv: prefer kmalloc_array to kmalloc when possible Antonio Quartulli
2014-08-05  7:36   ` Antonio Quartulli
2014-08-05  7:36 ` Antonio Quartulli [this message]
2014-08-05  7:36   ` [PATCH 2/4] batman-adv: remove unnecessary logspam Antonio Quartulli
2014-08-05  7:36 ` [B.A.T.M.A.N.] [PATCH 3/4] batman-adv: increase default hop penalty Antonio Quartulli
2014-08-05  7:36   ` Antonio Quartulli
2014-08-05  7:36 ` [B.A.T.M.A.N.] [PATCH 4/4] batman-adv: Start new development cycle Antonio Quartulli
2014-08-05  7:36   ` Antonio Quartulli
2014-08-05 23:40 ` [B.A.T.M.A.N.] pull request: batman-adv 2014-08-05 David Miller
2014-08-05 23:40   ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1407224188-28626-3-git-send-email-antonio@meshcoding.com \
    --to=antonio@meshcoding.com \
    --cc=b.a.t.m.a.n@lists.open-mesh.org \
    --cc=davem@davemloft.net \
    --cc=gaul@web-yard.de \
    --cc=mareklindner@neomailbox.ch \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.