From: Wei Wang <wei.w.wang@intel.com>
To: kvm@vger.kernel.org
Cc: pbonzini@redhat.com, alex.williamson@redhat.com,
Wei Wang <wei.w.wang@intel.com>,
Yang Zhang <yang.z.zhang@intel.com>
Subject: [PATCH v2] KVM: x86: keep eoi exit bitmap accurate before loading it.
Date: Wed, 27 Aug 2014 22:05:31 +0800 [thread overview]
Message-ID: <1409148331-5964-1-git-send-email-wei.w.wang@intel.com> (raw)
Guest may mask the IOAPIC entry before issue EOI. In such case,
EOI will not be intercepted by the hypervisor, since the corresponding
bit in eoi_exit_bitmap is not set after the masking of IOAPIC entry.
The solution here is to OR eoi_exit_bitmap with tmr to make sure that
all level-triggered interrupts have their bits in eoi_exit_bitmap set.
Tested-by: Rongrong Liu <rongrongx.liu@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
---
arch/x86/kvm/lapic.c | 12 ++++++++++++
arch/x86/kvm/lapic.h | 1 +
arch/x86/kvm/x86.c | 1 +
virt/kvm/ioapic.c | 7 ++++---
4 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 8c1162d..0fcac3c 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -539,6 +539,18 @@ void kvm_apic_update_tmr(struct kvm_vcpu *vcpu, u32 *tmr)
}
}
+void kvm_apic_update_eoi_exitmap(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap)
+{
+ struct kvm_lapic *apic = vcpu->arch.apic;
+ u32 i;
+ u32 tmr;
+
+ for (i = 0; i < 8; i++) {
+ tmr = kvm_apic_get_reg(apic, APIC_TMR + 0x10 * i);
+ *((u32 *)eoi_exit_bitmap + i) |= tmr;
+ }
+}
+
static void apic_update_ppr(struct kvm_lapic *apic)
{
u32 tpr, isrv, ppr, old_ppr;
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index 6a11845..d2b96f2 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -55,6 +55,7 @@ void kvm_apic_set_version(struct kvm_vcpu *vcpu);
void kvm_apic_update_tmr(struct kvm_vcpu *vcpu, u32 *tmr);
void kvm_apic_update_irr(struct kvm_vcpu *vcpu, u32 *pir);
+void kvm_apic_update_eoi_exitmap(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap);
int kvm_apic_match_physical_addr(struct kvm_lapic *apic, u16 dest);
int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda);
int kvm_apic_set_irq(struct kvm_vcpu *vcpu, struct kvm_lapic_irq *irq,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index d401684..d23b558 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -5992,6 +5992,7 @@ static void vcpu_scan_ioapic(struct kvm_vcpu *vcpu)
kvm_ioapic_scan_entry(vcpu, eoi_exit_bitmap, tmr);
kvm_apic_update_tmr(vcpu, tmr);
+ kvm_apic_update_eoi_exitmap(vcpu, eoi_exit_bitmap);
kvm_x86_ops->load_eoi_exitmap(vcpu, eoi_exit_bitmap);
}
diff --git a/virt/kvm/ioapic.c b/virt/kvm/ioapic.c
index e8ce34c..ed15936 100644
--- a/virt/kvm/ioapic.c
+++ b/virt/kvm/ioapic.c
@@ -254,9 +254,10 @@ void kvm_ioapic_scan_entry(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap,
spin_lock(&ioapic->lock);
for (index = 0; index < IOAPIC_NUM_PINS; index++) {
e = &ioapic->redirtbl[index];
- if (e->fields.trig_mode == IOAPIC_LEVEL_TRIG ||
- kvm_irq_has_notifier(ioapic->kvm, KVM_IRQCHIP_IOAPIC, index) ||
- index == RTC_GSI) {
+ if ((!e->fields.mask
+ && e->fields.trig_mode == IOAPIC_LEVEL_TRIG)
+ || kvm_irq_has_notifier(ioapic->kvm, KVM_IRQCHIP_IOAPIC,
+ index) || index == RTC_GSI) {
if (kvm_apic_match_dest(vcpu, NULL, 0,
e->fields.dest_id, e->fields.dest_mode)) {
__set_bit(e->fields.vector,
--
1.7.1
next reply other threads:[~2014-08-27 5:41 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-27 14:05 Wei Wang [this message]
2014-08-27 14:27 ` [PATCH v2] KVM: x86: keep eoi exit bitmap accurate before loading it Paolo Bonzini
2014-08-28 6:17 ` Zhang, Yang Z
2014-08-28 8:44 ` Paolo Bonzini
2014-08-28 10:14 ` Wang, Wei W
2014-08-28 11:00 ` Paolo Bonzini
2014-08-29 0:59 ` Wang, Wei W
2014-09-04 2:23 ` Wang, Wei W
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409148331-5964-1-git-send-email-wei.w.wang@intel.com \
--to=wei.w.wang@intel.com \
--cc=alex.williamson@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=yang.z.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.