* [PATCH v2 1/7] openrisc: generic board: reserve 512K for barebox
2014-09-08 6:53 [PATCH v2 0/7] openrisc: add device tree support Antony Pavlov
@ 2014-09-08 6:53 ` Antony Pavlov
2014-09-08 6:53 ` [PATCH v2 2/7] net: ethoc: add device tree support Antony Pavlov
` (6 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Antony Pavlov @ 2014-09-08 6:53 UTC (permalink / raw)
To: barebox
Here is a linker's error message for some configurations:
or1k-elf-ld: barebox section `.eh_frame' will not fit in region `ram'
or1k-elf-ld: region `ram' overflowed by 16868 bytes
This patch increases space reserved for barebox from 256K to 512K
so the error's probability is dramatically decreased.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Franck Jullien <franck.jullien@gmail.com>
---
arch/openrisc/boards/generic/config.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/openrisc/boards/generic/config.h b/arch/openrisc/boards/generic/config.h
index 6ebab42..10c33a1 100644
--- a/arch/openrisc/boards/generic/config.h
+++ b/arch/openrisc/boards/generic/config.h
@@ -13,8 +13,8 @@
#define OPENRISC_SOPC_ETHOC_BASE 0x92000000
-/* We reserve 256K for barebox */
-#define BAREBOX_RESERVED_SIZE 0x40000
+/* We reserve 512K for barebox */
+#define BAREBOX_RESERVED_SIZE 0x80000
/* Barebox will be at top of main memory */
#define OPENRISC_SOPC_TEXT_BASE (OPENRISC_SOPC_MEMORY_BASE + OPENRISC_SOPC_MEMORY_SIZE - BAREBOX_RESERVED_SIZE)
--
2.1.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v2 2/7] net: ethoc: add device tree support
2014-09-08 6:53 [PATCH v2 0/7] openrisc: add device tree support Antony Pavlov
2014-09-08 6:53 ` [PATCH v2 1/7] openrisc: generic board: reserve 512K for barebox Antony Pavlov
@ 2014-09-08 6:53 ` Antony Pavlov
2014-09-08 6:53 ` [PATCH v2 3/7] openrisc: add initial " Antony Pavlov
` (5 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Antony Pavlov @ 2014-09-08 6:53 UTC (permalink / raw)
To: barebox
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Franck Jullien <franck.jullien@gmail.com>
---
drivers/net/ethoc.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index 679e1e5..35d7d46 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -565,8 +565,14 @@ static int ethoc_probe(struct device_d *dev)
return 0;
}
+static struct of_device_id ethoc_dt_ids[] = {
+ { .compatible = "opencores,ethoc", },
+ { }
+};
+
static struct driver_d ethoc_driver = {
.name = "ethoc",
.probe = ethoc_probe,
+ .of_compatible = DRV_OF_COMPAT(ethoc_dt_ids),
};
device_platform_driver(ethoc_driver);
--
2.1.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v2 3/7] openrisc: add initial device tree support
2014-09-08 6:53 [PATCH v2 0/7] openrisc: add device tree support Antony Pavlov
2014-09-08 6:53 ` [PATCH v2 1/7] openrisc: generic board: reserve 512K for barebox Antony Pavlov
2014-09-08 6:53 ` [PATCH v2 2/7] net: ethoc: add device tree support Antony Pavlov
@ 2014-09-08 6:53 ` Antony Pavlov
2014-09-08 6:53 ` [PATCH v2 4/7] openrisc: dts: import or1ksim.dts from linux-3.16 Antony Pavlov
` (4 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Antony Pavlov @ 2014-09-08 6:53 UTC (permalink / raw)
To: barebox
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Franck Jullien <franck.jullien@gmail.com>
---
arch/openrisc/Kconfig | 9 +++++++++
arch/openrisc/Makefile | 7 +++++++
arch/openrisc/cpu/barebox.lds.S | 2 ++
arch/openrisc/dts/Makefile | 5 +++++
arch/openrisc/lib/Makefile | 1 +
arch/openrisc/lib/dtb.c | 44 +++++++++++++++++++++++++++++++++++++++++
drivers/of/Kconfig | 2 +-
7 files changed, 69 insertions(+), 1 deletion(-)
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 23c6a71..483ae6d 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -1,5 +1,6 @@
config OPENRISC
bool
+ select OFTREE
select HAS_CACHE
select HAVE_CONFIGURABLE_MEMORY_LAYOUT
select HAVE_DEFAULT_ENVIRONMENT_NEW
@@ -11,6 +12,14 @@ config ARCH_TEXT_BASE
hex
default 0x00000000
+config BUILTIN_DTB
+ bool "link a DTB into the barebox image"
+ depends on OFTREE
+
+config BUILTIN_DTB_NAME
+ string "DTB to build into the barebox image"
+ depends on BUILTIN_DTB
+
choice
prompt "Select your board"
diff --git a/arch/openrisc/Makefile b/arch/openrisc/Makefile
index fd8bbbf..b0c8566 100644
--- a/arch/openrisc/Makefile
+++ b/arch/openrisc/Makefile
@@ -19,3 +19,10 @@ common-y += arch/openrisc/lib/
common-y += arch/openrisc/cpu/
lds-y += arch/openrisc/cpu/barebox.lds
+
+common-$(CONFIG_BUILTIN_DTB) += arch/openrisc/dts/
+
+dts := arch/openrisc/dts
+
+%.dtb: scripts
+ $(Q)$(MAKE) $(build)=$(dts) $(dts)/$@
diff --git a/arch/openrisc/cpu/barebox.lds.S b/arch/openrisc/cpu/barebox.lds.S
index d71df46..d4b6359 100644
--- a/arch/openrisc/cpu/barebox.lds.S
+++ b/arch/openrisc/cpu/barebox.lds.S
@@ -69,6 +69,8 @@ SECTIONS
__usymtab : { BAREBOX_SYMS } > ram
___usymtab_end = .;
+ .dtb : { BAREBOX_DTB() } > ram
+
__etext = .; /* End of text and rodata section */
. = ALIGN(4);
diff --git a/arch/openrisc/dts/Makefile b/arch/openrisc/dts/Makefile
new file mode 100644
index 0000000..6d6c9a3
--- /dev/null
+++ b/arch/openrisc/dts/Makefile
@@ -0,0 +1,5 @@
+
+BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_BUILTIN_DTB_NAME))
+obj-$(CONFIG_BUILTIN_DTB) += $(BUILTIN_DTB).dtb.o
+
+clean-files := *.dtb *.dtb.S
diff --git a/arch/openrisc/lib/Makefile b/arch/openrisc/lib/Makefile
index 0b3cc50..62082fe 100644
--- a/arch/openrisc/lib/Makefile
+++ b/arch/openrisc/lib/Makefile
@@ -5,3 +5,4 @@ obj-y += muldi3.o
obj-y += lshrdi3.o
obj-y += ashldi3.o
obj-y += ashrdi3.o
+obj-$(CONFIG_BUILTIN_DTB) += dtb.o
diff --git a/arch/openrisc/lib/dtb.c b/arch/openrisc/lib/dtb.c
new file mode 100644
index 0000000..4f63a77
--- /dev/null
+++ b/arch/openrisc/lib/dtb.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2014 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * Based on arch/arm/cpu/dtb.c:
+ * Copyright (C) 2013 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <common.h>
+#include <init.h>
+#include <of.h>
+
+extern char __dtb_start[];
+
+static int of_openrisc_init(void)
+{
+ struct device_node *root;
+
+ root = of_get_root_node();
+ if (root)
+ return 0;
+
+ root = of_unflatten_dtb(__dtb_start);
+ if (root) {
+ pr_debug("using internal DTB\n");
+ of_set_root_node(root);
+ if (IS_ENABLED(CONFIG_OFDEVICE))
+ of_probe();
+ }
+
+ return 0;
+}
+core_initcall(of_openrisc_init);
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 8195506..97a1d93 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -4,7 +4,7 @@ config OFTREE
config OFTREE_MEM_GENERIC
depends on OFTREE
- depends on PPC || ARM || ARCH_EFI
+ depends on PPC || ARM || ARCH_EFI || OPENRISC
def_bool y
config DTC
--
2.1.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v2 4/7] openrisc: dts: import or1ksim.dts from linux-3.16
2014-09-08 6:53 [PATCH v2 0/7] openrisc: add device tree support Antony Pavlov
` (2 preceding siblings ...)
2014-09-08 6:53 ` [PATCH v2 3/7] openrisc: add initial " Antony Pavlov
@ 2014-09-08 6:53 ` Antony Pavlov
2014-09-08 6:53 ` [PATCH v2 5/7] openrisc: generic board: reduce platform code Antony Pavlov
` (3 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Antony Pavlov @ 2014-09-08 6:53 UTC (permalink / raw)
To: barebox
There are some minor changes with original linux-3.16 file:
* the 'model' attribute is added (it used for barebox banner board name);
* all "opencores,*-rtlsvn*" 'compatible' attribute values are dropped;
these values are not actually used in the device drivers.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Franck Jullien <franck.jullien@gmail.com>
---
arch/openrisc/dts/or1ksim.dts | 51 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/arch/openrisc/dts/or1ksim.dts b/arch/openrisc/dts/or1ksim.dts
new file mode 100644
index 0000000..7316cc6
--- /dev/null
+++ b/arch/openrisc/dts/or1ksim.dts
@@ -0,0 +1,51 @@
+/dts-v1/;
+/ {
+ model = "or1ksim";
+ compatible = "opencores,or1ksim";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&pic>;
+
+ chosen {
+ bootargs = "console=uart,mmio,0x90000000,115200";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x02000000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "opencores,or1200-rtlsvn481";
+ reg = <0>;
+ clock-frequency = <20000000>;
+ };
+ };
+
+ /*
+ * OR1K PIC is built into CPU and accessed via special purpose
+ * registers. It is not addressable and, hence, has no 'reg'
+ * property.
+ */
+ pic: pic {
+ compatible = "opencores,or1k-pic";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+
+ serial0: serial@90000000 {
+ compatible = "ns16550a";
+ reg = <0x90000000 0x100>;
+ interrupts = <2>;
+ clock-frequency = <50000000>;
+ };
+
+ enet0: ethoc@92000000 {
+ compatible = "opencores,ethoc";
+ reg = <0x92000000 0x100>;
+ interrupts = <4>;
+ };
+};
--
2.1.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v2 5/7] openrisc: generic board: reduce platform code
2014-09-08 6:53 [PATCH v2 0/7] openrisc: add device tree support Antony Pavlov
` (3 preceding siblings ...)
2014-09-08 6:53 ` [PATCH v2 4/7] openrisc: dts: import or1ksim.dts from linux-3.16 Antony Pavlov
@ 2014-09-08 6:53 ` Antony Pavlov
2014-09-08 6:53 ` [PATCH v2 6/7] openrisc: generic_defconfig: enable device tree stuff Antony Pavlov
` (2 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Antony Pavlov @ 2014-09-08 6:53 UTC (permalink / raw)
To: barebox
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Franck Jullien <franck.jullien@gmail.com>
---
arch/openrisc/boards/generic/config.h | 5 -----
arch/openrisc/boards/generic/generic.c | 24 ++----------------------
2 files changed, 2 insertions(+), 27 deletions(-)
diff --git a/arch/openrisc/boards/generic/config.h b/arch/openrisc/boards/generic/config.h
index 10c33a1..f6a054b 100644
--- a/arch/openrisc/boards/generic/config.h
+++ b/arch/openrisc/boards/generic/config.h
@@ -8,11 +8,6 @@
#define OPENRISC_SOPC_MEMORY_BASE 0x00000000
#define OPENRISC_SOPC_MEMORY_SIZE 0x02000000
-#define OPENRISC_SOPC_UART_FREQ CONFIG_SYS_CLK_FREQ
-#define OPENRISC_SOPC_UART_BASE 0x90000000
-
-#define OPENRISC_SOPC_ETHOC_BASE 0x92000000
-
/* We reserve 512K for barebox */
#define BAREBOX_RESERVED_SIZE 0x80000
diff --git a/arch/openrisc/boards/generic/generic.c b/arch/openrisc/boards/generic/generic.c
index 9f68007..ff6f9f4 100644
--- a/arch/openrisc/boards/generic/generic.c
+++ b/arch/openrisc/boards/generic/generic.c
@@ -1,30 +1,10 @@
#include <common.h>
#include <init.h>
-#include <driver.h>
-#include <partition.h>
-#include <ns16550.h>
-static struct NS16550_plat serial_plat = {
- .clock = OPENRISC_SOPC_UART_FREQ,
- .shift = 0,
-};
-
-static int openrisc_console_init(void)
+static int openrisc_core_init(void)
{
- barebox_set_model("OpenRISC or1k");
barebox_set_hostname("or1k");
- /* Register the serial port */
- add_ns16550_device(DEVICE_ID_DYNAMIC, OPENRISC_SOPC_UART_BASE, 1024,
- IORESOURCE_MEM | IORESOURCE_MEM_8BIT, &serial_plat);
-
-#ifdef CONFIG_DRIVER_NET_ETHOC
- add_generic_device("ethoc", DEVICE_ID_DYNAMIC, NULL,
- OPENRISC_SOPC_ETHOC_BASE, 0x1000,
- IORESOURCE_MEM, NULL);
-#endif
-
return 0;
}
-
-console_initcall(openrisc_console_init);
+core_initcall(openrisc_core_init);
--
2.1.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v2 6/7] openrisc: generic_defconfig: enable device tree stuff
2014-09-08 6:53 [PATCH v2 0/7] openrisc: add device tree support Antony Pavlov
` (4 preceding siblings ...)
2014-09-08 6:53 ` [PATCH v2 5/7] openrisc: generic board: reduce platform code Antony Pavlov
@ 2014-09-08 6:53 ` Antony Pavlov
2014-09-08 6:53 ` [PATCH v2 7/7] Documentation: add OpenRISC or1ksim emulator section Antony Pavlov
2014-09-09 8:28 ` [PATCH v2 0/7] openrisc: add device tree support Sascha Hauer
7 siblings, 0 replies; 12+ messages in thread
From: Antony Pavlov @ 2014-09-08 6:53 UTC (permalink / raw)
To: barebox
Also enable iomem and miitool.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Franck Jullien <franck.jullien@gmail.com>
---
arch/openrisc/configs/generic_defconfig | 35 +++++++++++++++++++++------------
1 file changed, 22 insertions(+), 13 deletions(-)
diff --git a/arch/openrisc/configs/generic_defconfig b/arch/openrisc/configs/generic_defconfig
index deaef2a..1f2d40e 100644
--- a/arch/openrisc/configs/generic_defconfig
+++ b/arch/openrisc/configs/generic_defconfig
@@ -1,26 +1,35 @@
-CONFIG_LONGHELP=y
+CONFIG_BUILTIN_DTB=y
+CONFIG_BUILTIN_DTB_NAME="or1ksim"
CONFIG_HUSH_FANCY_PROMPT=y
CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
CONFIG_PARTITION=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_ECHO_E=y
+CONFIG_LONGHELP=y
+CONFIG_CMD_IOMEM=y
CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_FLASH=y
# CONFIG_CMD_BOOTM is not set
-CONFIG_CMD_RESET=y
CONFIG_CMD_GO=y
-CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_RESET=y
CONFIG_CMD_PARTITION=y
-CONFIG_DRIVER_SERIAL_NS16550=y
-CONFIG_NET=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_SAVEENV=y
CONFIG_CMD_DHCP=y
+CONFIG_CMD_MIITOOL=y
CONFIG_CMD_PING=y
CONFIG_CMD_TFTP=y
-CONFIG_FS_TFTP=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_OF_NODE=y
+CONFIG_CMD_OF_PROPERTY=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIME=y
+CONFIG_NET=y
+CONFIG_OFDEVICE=y
+CONFIG_OF_BAREBOX_DRIVERS=y
+CONFIG_DRIVER_SERIAL_NS16550=y
CONFIG_DRIVER_NET_ETHOC=y
+CONFIG_FS_TFTP=y
--
2.1.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v2 7/7] Documentation: add OpenRISC or1ksim emulator section
2014-09-08 6:53 [PATCH v2 0/7] openrisc: add device tree support Antony Pavlov
` (5 preceding siblings ...)
2014-09-08 6:53 ` [PATCH v2 6/7] openrisc: generic_defconfig: enable device tree stuff Antony Pavlov
@ 2014-09-08 6:53 ` Antony Pavlov
2014-09-08 7:12 ` Franck Jullien
2014-09-09 8:28 ` [PATCH v2 0/7] openrisc: add device tree support Sascha Hauer
7 siblings, 1 reply; 12+ messages in thread
From: Antony Pavlov @ 2014-09-08 6:53 UTC (permalink / raw)
To: barebox
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Franck Jullien <franck.jullien@gmail.com>
---
Documentation/boards/openrisc.rst | 51 +++++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/Documentation/boards/openrisc.rst b/Documentation/boards/openrisc.rst
new file mode 100644
index 0000000..0b36712
--- /dev/null
+++ b/Documentation/boards/openrisc.rst
@@ -0,0 +1,51 @@
+OpenRISC
+========
+
+or1ksim
+-------
+
+Compile or1ksim emulator::
+
+ $ cd ~/
+ $ git clone https://github.com/fjullien/or1ksim
+ $ cd or1ksim
+ $ ./configure
+ $ make
+
+Create minimal or1ksim.cfg file::
+
+ section cpu
+ ver = 0x12
+ cfgr = 0x20
+ rev = 0x0001
+ end
+
+ section memory
+ name = "RAM"
+ type = unknown
+ baseaddr = 0x00000000
+ size = 0x02000000
+ delayr = 1
+ delayw = 2
+ end
+
+ section uart
+ enabled = 1
+ baseaddr = 0x90000000
+ irq = 2
+ 16550 = 1
+ /* channel = "tcp:10084" */
+ channel = "xterm:"
+ end
+
+ section ethernet
+ enabled = 1
+ baseaddr = 0x92000000
+ irq = 4
+ rtx_type = "tap"
+ tap_dev = "tap0"
+ end
+
+Run or1ksim::
+
+ $ ~/or1ksim/sim -f or1ksim.cfg barebox
--
2.1.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH v2 7/7] Documentation: add OpenRISC or1ksim emulator section
2014-09-08 6:53 ` [PATCH v2 7/7] Documentation: add OpenRISC or1ksim emulator section Antony Pavlov
@ 2014-09-08 7:12 ` Franck Jullien
2014-09-09 8:29 ` Sascha Hauer
0 siblings, 1 reply; 12+ messages in thread
From: Franck Jullien @ 2014-09-08 7:12 UTC (permalink / raw)
To: Antony Pavlov; +Cc: barebox
Hi Antony,
2014-09-08 8:53 GMT+02:00 Antony Pavlov <antonynpavlov@gmail.com>:
> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
> Cc: Franck Jullien <franck.jullien@gmail.com>
> ---
> Documentation/boards/openrisc.rst | 51 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 51 insertions(+)
>
> diff --git a/Documentation/boards/openrisc.rst b/Documentation/boards/openrisc.rst
> new file mode 100644
> index 0000000..0b36712
> --- /dev/null
> +++ b/Documentation/boards/openrisc.rst
> @@ -0,0 +1,51 @@
> +OpenRISC
> +========
> +
> +or1ksim
> +-------
> +
> +Compile or1ksim emulator::
> +
> + $ cd ~/
> + $ git clone https://github.com/fjullien/or1ksim
You should use this repo: https://github.com/openrisc/or1ksim
> + $ cd or1ksim
> + $ ./configure
> + $ make
> +
> +Create minimal or1ksim.cfg file::
> +
> + section cpu
> + ver = 0x12
> + cfgr = 0x20
> + rev = 0x0001
> + end
> +
> + section memory
> + name = "RAM"
> + type = unknown
> + baseaddr = 0x00000000
> + size = 0x02000000
> + delayr = 1
> + delayw = 2
> + end
> +
> + section uart
> + enabled = 1
> + baseaddr = 0x90000000
> + irq = 2
> + 16550 = 1
> + /* channel = "tcp:10084" */
> + channel = "xterm:"
> + end
> +
> + section ethernet
> + enabled = 1
> + baseaddr = 0x92000000
> + irq = 4
> + rtx_type = "tap"
> + tap_dev = "tap0"
> + end
> +
> +Run or1ksim::
> +
> + $ ~/or1ksim/sim -f or1ksim.cfg barebox
> --
> 2.1.0
>
Franck.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v2 7/7] Documentation: add OpenRISC or1ksim emulator section
2014-09-08 7:12 ` Franck Jullien
@ 2014-09-09 8:29 ` Sascha Hauer
2014-09-09 10:38 ` Antony Pavlov
0 siblings, 1 reply; 12+ messages in thread
From: Sascha Hauer @ 2014-09-09 8:29 UTC (permalink / raw)
To: Franck Jullien; +Cc: barebox
On Mon, Sep 08, 2014 at 09:12:06AM +0200, Franck Jullien wrote:
> Hi Antony,
>
> 2014-09-08 8:53 GMT+02:00 Antony Pavlov <antonynpavlov@gmail.com>:
> > Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
> > Cc: Franck Jullien <franck.jullien@gmail.com>
> > ---
> > Documentation/boards/openrisc.rst | 51 +++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 51 insertions(+)
> >
> > diff --git a/Documentation/boards/openrisc.rst b/Documentation/boards/openrisc.rst
> > new file mode 100644
> > index 0000000..0b36712
> > --- /dev/null
> > +++ b/Documentation/boards/openrisc.rst
> > @@ -0,0 +1,51 @@
> > +OpenRISC
> > +========
> > +
> > +or1ksim
> > +-------
> > +
> > +Compile or1ksim emulator::
> > +
> > + $ cd ~/
> > + $ git clone https://github.com/fjullien/or1ksim
>
> You should use this repo: https://github.com/openrisc/or1ksim
I changed while this applying.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v2 7/7] Documentation: add OpenRISC or1ksim emulator section
2014-09-09 8:29 ` Sascha Hauer
@ 2014-09-09 10:38 ` Antony Pavlov
0 siblings, 0 replies; 12+ messages in thread
From: Antony Pavlov @ 2014-09-09 10:38 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
On Tue, 9 Sep 2014 10:29:25 +0200
Sascha Hauer <s.hauer@pengutronix.de> wrote:
> On Mon, Sep 08, 2014 at 09:12:06AM +0200, Franck Jullien wrote:
> > Hi Antony,
> >
> > 2014-09-08 8:53 GMT+02:00 Antony Pavlov <antonynpavlov@gmail.com>:
> > > Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
> > > Cc: Franck Jullien <franck.jullien@gmail.com>
> > > ---
> > > Documentation/boards/openrisc.rst | 51 +++++++++++++++++++++++++++++++++++++++
> > > 1 file changed, 51 insertions(+)
> > >
> > > diff --git a/Documentation/boards/openrisc.rst b/Documentation/boards/openrisc.rst
> > > new file mode 100644
> > > index 0000000..0b36712
> > > --- /dev/null
> > > +++ b/Documentation/boards/openrisc.rst
> > > @@ -0,0 +1,51 @@
> > > +OpenRISC
> > > +========
> > > +
> > > +or1ksim
> > > +-------
> > > +
> > > +Compile or1ksim emulator::
> > > +
> > > + $ cd ~/
> > > + $ git clone https://github.com/fjullien/or1ksim
> >
> > You should use this repo: https://github.com/openrisc/or1ksim
>
> I changed while this applying.
Thanks!
Just in case I have tested barebox with https://github.com/openrisc/or1ksim repo emulator.
It works fine.
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v2 0/7] openrisc: add device tree support
2014-09-08 6:53 [PATCH v2 0/7] openrisc: add device tree support Antony Pavlov
` (6 preceding siblings ...)
2014-09-08 6:53 ` [PATCH v2 7/7] Documentation: add OpenRISC or1ksim emulator section Antony Pavlov
@ 2014-09-09 8:28 ` Sascha Hauer
7 siblings, 0 replies; 12+ messages in thread
From: Sascha Hauer @ 2014-09-09 8:28 UTC (permalink / raw)
To: Antony Pavlov; +Cc: barebox
On Mon, Sep 08, 2014 at 10:53:02AM +0400, Antony Pavlov wrote:
> This patch series adds device tree support for openrisc generic board.
> The barebox mips device tree support is used as a sample.
>
> Changes since v1:
>
> * rebase over latest next;
> * add 'Documentation: add OpenRISC or1ksim emulator section'.
>
> Antony Pavlov (7):
> openrisc: generic board: reserve 512K for barebox
> net: ethoc: add device tree support
> openrisc: add initial device tree support
> openrisc: dts: import or1ksim.dts from linux-3.16
> openrisc: generic board: reduce platform code
> openrisc: generic_defconfig: enable device tree stuff
> Documentation: add OpenRISC or1ksim emulator section
Applied, thanks.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread