From: Jiang Liu <jiang.liu@linux.intel.com>
To: Joerg Roedel <joro@8bytes.org>,
David Woodhouse <dwmw2@infradead.org>,
Yinghai Lu <yinghai@kernel.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Dan Williams <dan.j.williams@intel.com>,
Vinod Koul <vinod.koul@intel.com>,
"Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>,
Ashok Raj <ashok.raj@intel.com>,
Yijing Wang <wangyijing@huawei.com>,
Tony Luck <tony.luck@intel.com>,
iommu@lists.linux-foundation.org, linux-pci@vger.kernel.org,
linux-hotplug@vger.kernel.org, linux-kernel@vger.kernel.org,
dmaengine@vger.kernel.org
Subject: [Patch Part3 V5 5/8] iommu/vt-d: Enhance intel_irq_remapping driver to support DMAR unit hotplug
Date: Fri, 12 Sep 2014 02:10:45 +0000 [thread overview]
Message-ID: <1410487848-6027-6-git-send-email-jiang.liu@linux.intel.com> (raw)
In-Reply-To: <1410487848-6027-1-git-send-email-jiang.liu@linux.intel.com>
Implement required callback functions for intel_irq_remapping driver
to support DMAR unit hotplug.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
---
drivers/iommu/intel_irq_remapping.c | 222 ++++++++++++++++++++++++++---------
1 file changed, 169 insertions(+), 53 deletions(-)
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index 9b140ed854ec..7cf31a29f77a 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -36,7 +36,6 @@ struct hpet_scope {
static struct ioapic_scope ir_ioapic[MAX_IO_APICS];
static struct hpet_scope ir_hpet[MAX_HPET_TBS];
-static int ir_ioapic_num, ir_hpet_num;
/*
* Lock ordering:
@@ -325,7 +324,7 @@ static int set_ioapic_sid(struct irte *irte, int apic)
down_read(&dmar_global_lock);
for (i = 0; i < MAX_IO_APICS; i++) {
- if (ir_ioapic[i].id = apic) {
+ if (ir_ioapic[i].iommu && ir_ioapic[i].id = apic) {
sid = (ir_ioapic[i].bus << 8) | ir_ioapic[i].devfn;
break;
}
@@ -352,7 +351,7 @@ static int set_hpet_sid(struct irte *irte, u8 id)
down_read(&dmar_global_lock);
for (i = 0; i < MAX_HPET_TBS; i++) {
- if (ir_hpet[i].id = id) {
+ if (ir_hpet[i].iommu && ir_hpet[i].id = id) {
sid = (ir_hpet[i].bus << 8) | ir_hpet[i].devfn;
break;
}
@@ -474,17 +473,17 @@ static void iommu_set_irq_remapping(struct intel_iommu *iommu, int mode)
raw_spin_unlock_irqrestore(&iommu->register_lock, flags);
}
-
-static int intel_setup_irq_remapping(struct intel_iommu *iommu, int mode)
+static int intel_setup_irq_remapping(struct intel_iommu *iommu)
{
struct ir_table *ir_table;
struct page *pages;
unsigned long *bitmap;
- ir_table = iommu->ir_table = kzalloc(sizeof(struct ir_table),
- GFP_ATOMIC);
+ if (iommu->ir_table)
+ return 0;
- if (!iommu->ir_table)
+ ir_table = kzalloc(sizeof(struct ir_table), GFP_ATOMIC);
+ if (!ir_table)
return -ENOMEM;
pages = alloc_pages_node(iommu->node, GFP_ATOMIC | __GFP_ZERO,
@@ -493,7 +492,7 @@ static int intel_setup_irq_remapping(struct intel_iommu *iommu, int mode)
if (!pages) {
pr_err("IR%d: failed to allocate pages of order %d\n",
iommu->seq_id, INTR_REMAP_PAGE_ORDER);
- kfree(iommu->ir_table);
+ kfree(ir_table);
return -ENOMEM;
}
@@ -508,11 +507,22 @@ static int intel_setup_irq_remapping(struct intel_iommu *iommu, int mode)
ir_table->base = page_address(pages);
ir_table->bitmap = bitmap;
+ iommu->ir_table = ir_table;
- iommu_set_irq_remapping(iommu, mode);
return 0;
}
+static void intel_teardown_irq_remapping(struct intel_iommu *iommu)
+{
+ if (iommu && iommu->ir_table) {
+ free_pages((unsigned long)iommu->ir_table->base,
+ INTR_REMAP_PAGE_ORDER);
+ kfree(iommu->ir_table->bitmap);
+ kfree(iommu->ir_table);
+ iommu->ir_table = NULL;
+ }
+}
+
/*
* Disable Interrupt Remapping.
*/
@@ -667,9 +677,10 @@ static int __init intel_enable_irq_remapping(void)
if (!ecap_ir_support(iommu->ecap))
continue;
- if (intel_setup_irq_remapping(iommu, eim))
+ if (intel_setup_irq_remapping(iommu))
goto error;
+ iommu_set_irq_remapping(iommu, eim);
setup = 1;
}
@@ -700,12 +711,13 @@ error:
return -1;
}
-static void ir_parse_one_hpet_scope(struct acpi_dmar_device_scope *scope,
- struct intel_iommu *iommu)
+static int ir_parse_one_hpet_scope(struct acpi_dmar_device_scope *scope,
+ struct intel_iommu *iommu,
+ struct acpi_dmar_hardware_unit *drhd)
{
struct acpi_dmar_pci_path *path;
u8 bus;
- int count;
+ int count, free = -1;
bus = scope->bus;
path = (struct acpi_dmar_pci_path *)(scope + 1);
@@ -721,19 +733,36 @@ static void ir_parse_one_hpet_scope(struct acpi_dmar_device_scope *scope,
PCI_SECONDARY_BUS);
path++;
}
- ir_hpet[ir_hpet_num].bus = bus;
- ir_hpet[ir_hpet_num].devfn = PCI_DEVFN(path->device, path->function);
- ir_hpet[ir_hpet_num].iommu = iommu;
- ir_hpet[ir_hpet_num].id = scope->enumeration_id;
- ir_hpet_num++;
+
+ for (count = 0; count < MAX_HPET_TBS; count++) {
+ if (ir_hpet[count].iommu = iommu &&
+ ir_hpet[count].id = scope->enumeration_id)
+ return 0;
+ else if (ir_hpet[count].iommu = NULL && free = -1)
+ free = count;
+ }
+ if (free = -1) {
+ pr_warn("Exceeded Max HPET blocks\n");
+ return -ENOSPC;
+ }
+
+ ir_hpet[free].iommu = iommu;
+ ir_hpet[free].id = scope->enumeration_id;
+ ir_hpet[free].bus = bus;
+ ir_hpet[free].devfn = PCI_DEVFN(path->device, path->function);
+ pr_info("HPET id %d under DRHD base 0x%Lx\n",
+ scope->enumeration_id, drhd->address);
+
+ return 0;
}
-static void ir_parse_one_ioapic_scope(struct acpi_dmar_device_scope *scope,
- struct intel_iommu *iommu)
+static int ir_parse_one_ioapic_scope(struct acpi_dmar_device_scope *scope,
+ struct intel_iommu *iommu,
+ struct acpi_dmar_hardware_unit *drhd)
{
struct acpi_dmar_pci_path *path;
u8 bus;
- int count;
+ int count, free = -1;
bus = scope->bus;
path = (struct acpi_dmar_pci_path *)(scope + 1);
@@ -750,54 +779,63 @@ static void ir_parse_one_ioapic_scope(struct acpi_dmar_device_scope *scope,
path++;
}
- ir_ioapic[ir_ioapic_num].bus = bus;
- ir_ioapic[ir_ioapic_num].devfn = PCI_DEVFN(path->device, path->function);
- ir_ioapic[ir_ioapic_num].iommu = iommu;
- ir_ioapic[ir_ioapic_num].id = scope->enumeration_id;
- ir_ioapic_num++;
+ for (count = 0; count < MAX_IO_APICS; count++) {
+ if (ir_ioapic[count].iommu = iommu &&
+ ir_ioapic[count].id = scope->enumeration_id)
+ return 0;
+ else if (ir_ioapic[count].iommu = NULL && free = -1)
+ free = count;
+ }
+ if (free = -1) {
+ pr_warn("Exceeded Max IO APICS\n");
+ return -ENOSPC;
+ }
+
+ ir_ioapic[free].bus = bus;
+ ir_ioapic[free].devfn = PCI_DEVFN(path->device, path->function);
+ ir_ioapic[free].iommu = iommu;
+ ir_ioapic[free].id = scope->enumeration_id;
+ pr_info("IOAPIC id %d under DRHD base 0x%Lx IOMMU %d\n",
+ scope->enumeration_id, drhd->address, iommu->seq_id);
+
+ return 0;
}
static int ir_parse_ioapic_hpet_scope(struct acpi_dmar_header *header,
struct intel_iommu *iommu)
{
+ int ret = 0;
struct acpi_dmar_hardware_unit *drhd;
struct acpi_dmar_device_scope *scope;
void *start, *end;
drhd = (struct acpi_dmar_hardware_unit *)header;
-
start = (void *)(drhd + 1);
end = ((void *)drhd) + header->length;
- while (start < end) {
+ while (start < end && ret = 0) {
scope = start;
- if (scope->entry_type = ACPI_DMAR_SCOPE_TYPE_IOAPIC) {
- if (ir_ioapic_num = MAX_IO_APICS) {
- printk(KERN_WARNING "Exceeded Max IO APICS\n");
- return -1;
- }
-
- printk(KERN_INFO "IOAPIC id %d under DRHD base "
- " 0x%Lx IOMMU %d\n", scope->enumeration_id,
- drhd->address, iommu->seq_id);
+ if (scope->entry_type = ACPI_DMAR_SCOPE_TYPE_IOAPIC)
+ ret = ir_parse_one_ioapic_scope(scope, iommu, drhd);
+ else if (scope->entry_type = ACPI_DMAR_SCOPE_TYPE_HPET)
+ ret = ir_parse_one_hpet_scope(scope, iommu, drhd);
+ start += scope->length;
+ }
- ir_parse_one_ioapic_scope(scope, iommu);
- } else if (scope->entry_type = ACPI_DMAR_SCOPE_TYPE_HPET) {
- if (ir_hpet_num = MAX_HPET_TBS) {
- printk(KERN_WARNING "Exceeded Max HPET blocks\n");
- return -1;
- }
+ return ret;
+}
- printk(KERN_INFO "HPET id %d under DRHD base"
- " 0x%Lx\n", scope->enumeration_id,
- drhd->address);
+static void ir_remove_ioapic_hpet_scope(struct intel_iommu *iommu)
+{
+ int i;
- ir_parse_one_hpet_scope(scope, iommu);
- }
- start += scope->length;
- }
+ for (i = 0; i < MAX_HPET_TBS; i++)
+ if (ir_hpet[i].iommu = iommu)
+ ir_hpet[i].iommu = NULL;
- return 0;
+ for (i = 0; i < MAX_IO_APICS; i++)
+ if (ir_ioapic[i].iommu = iommu)
+ ir_ioapic[i].iommu = NULL;
}
/*
@@ -1173,7 +1211,85 @@ struct irq_remap_ops intel_irq_remap_ops = {
.setup_hpet_msi = intel_setup_hpet_msi,
};
+/*
+ * Support of Interrupt Remapping Unit Hotplug
+ */
+static int dmar_ir_add(struct dmar_drhd_unit *dmaru, struct intel_iommu *iommu)
+{
+ int ret;
+ int eim = x2apic_enabled();
+
+ if (eim && !ecap_eim_support(iommu->ecap)) {
+ pr_info("DRHD %Lx: EIM not supported by DRHD, ecap %Lx\n",
+ iommu->reg_phys, iommu->ecap);
+ return -ENODEV;
+ }
+
+ if (ir_parse_ioapic_hpet_scope(dmaru->hdr, iommu)) {
+ pr_warn("DRHD %Lx: failed to parse managed IOAPIC/HPET\n",
+ iommu->reg_phys);
+ return -ENODEV;
+ }
+
+ /* TODO: check all IOAPICs are covered by IOMMU */
+
+ /* Setup Interrupt-remapping now. */
+ ret = intel_setup_irq_remapping(iommu);
+ if (ret) {
+ pr_err("DRHD %Lx: failed to allocate resource\n",
+ iommu->reg_phys);
+ ir_remove_ioapic_hpet_scope(iommu);
+ return ret;
+ }
+
+ if (!iommu->qi) {
+ /* Clear previous faults. */
+ dmar_fault(-1, iommu);
+ iommu_disable_irq_remapping(iommu);
+ dmar_disable_qi(iommu);
+ }
+
+ /* Enable queued invalidation */
+ ret = dmar_enable_qi(iommu);
+ if (!ret) {
+ iommu_set_irq_remapping(iommu, eim);
+ } else {
+ pr_err("DRHD %Lx: failed to enable queued invalidation, ecap %Lx, ret %d\n",
+ iommu->reg_phys, iommu->ecap, ret);
+ intel_teardown_irq_remapping(iommu);
+ ir_remove_ioapic_hpet_scope(iommu);
+ }
+
+ return ret;
+}
+
int dmar_ir_hotplug(struct dmar_drhd_unit *dmaru, bool insert)
{
- return irq_remapping_enabled ? -ENOSYS : 0;
+ int ret = 0;
+ struct intel_iommu *iommu = dmaru->iommu;
+
+ if (!irq_remapping_enabled)
+ return 0;
+ if (iommu = NULL)
+ return -EINVAL;
+ if (!ecap_ir_support(iommu->ecap))
+ return 0;
+
+ if (insert) {
+ if (!iommu->ir_table)
+ ret = dmar_ir_add(dmaru, iommu);
+ } else {
+ if (iommu->ir_table) {
+ if (!bitmap_empty(iommu->ir_table->bitmap,
+ INTR_REMAP_TABLE_ENTRIES)) {
+ ret = -EBUSY;
+ } else {
+ iommu_disable_irq_remapping(iommu);
+ intel_teardown_irq_remapping(iommu);
+ ir_remove_ioapic_hpet_scope(iommu);
+ }
+ }
+ }
+
+ return ret;
}
--
1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: Jiang Liu <jiang.liu-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>,
David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
Yinghai Lu <yinghai-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Bjorn Helgaas <bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
Dan Williams
<dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
"Rafael J . Wysocki"
<rafael.j.wysocki-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Cc: Tony Luck <tony.luck-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-hotplug-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
Jiang Liu <jiang.liu-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Subject: [Patch Part3 V5 5/8] iommu/vt-d: Enhance intel_irq_remapping driver to support DMAR unit hotplug
Date: Fri, 12 Sep 2014 10:10:45 +0800 [thread overview]
Message-ID: <1410487848-6027-6-git-send-email-jiang.liu@linux.intel.com> (raw)
In-Reply-To: <1410487848-6027-1-git-send-email-jiang.liu-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Implement required callback functions for intel_irq_remapping driver
to support DMAR unit hotplug.
Signed-off-by: Jiang Liu <jiang.liu-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
drivers/iommu/intel_irq_remapping.c | 222 ++++++++++++++++++++++++++---------
1 file changed, 169 insertions(+), 53 deletions(-)
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index 9b140ed854ec..7cf31a29f77a 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -36,7 +36,6 @@ struct hpet_scope {
static struct ioapic_scope ir_ioapic[MAX_IO_APICS];
static struct hpet_scope ir_hpet[MAX_HPET_TBS];
-static int ir_ioapic_num, ir_hpet_num;
/*
* Lock ordering:
@@ -325,7 +324,7 @@ static int set_ioapic_sid(struct irte *irte, int apic)
down_read(&dmar_global_lock);
for (i = 0; i < MAX_IO_APICS; i++) {
- if (ir_ioapic[i].id == apic) {
+ if (ir_ioapic[i].iommu && ir_ioapic[i].id == apic) {
sid = (ir_ioapic[i].bus << 8) | ir_ioapic[i].devfn;
break;
}
@@ -352,7 +351,7 @@ static int set_hpet_sid(struct irte *irte, u8 id)
down_read(&dmar_global_lock);
for (i = 0; i < MAX_HPET_TBS; i++) {
- if (ir_hpet[i].id == id) {
+ if (ir_hpet[i].iommu && ir_hpet[i].id == id) {
sid = (ir_hpet[i].bus << 8) | ir_hpet[i].devfn;
break;
}
@@ -474,17 +473,17 @@ static void iommu_set_irq_remapping(struct intel_iommu *iommu, int mode)
raw_spin_unlock_irqrestore(&iommu->register_lock, flags);
}
-
-static int intel_setup_irq_remapping(struct intel_iommu *iommu, int mode)
+static int intel_setup_irq_remapping(struct intel_iommu *iommu)
{
struct ir_table *ir_table;
struct page *pages;
unsigned long *bitmap;
- ir_table = iommu->ir_table = kzalloc(sizeof(struct ir_table),
- GFP_ATOMIC);
+ if (iommu->ir_table)
+ return 0;
- if (!iommu->ir_table)
+ ir_table = kzalloc(sizeof(struct ir_table), GFP_ATOMIC);
+ if (!ir_table)
return -ENOMEM;
pages = alloc_pages_node(iommu->node, GFP_ATOMIC | __GFP_ZERO,
@@ -493,7 +492,7 @@ static int intel_setup_irq_remapping(struct intel_iommu *iommu, int mode)
if (!pages) {
pr_err("IR%d: failed to allocate pages of order %d\n",
iommu->seq_id, INTR_REMAP_PAGE_ORDER);
- kfree(iommu->ir_table);
+ kfree(ir_table);
return -ENOMEM;
}
@@ -508,11 +507,22 @@ static int intel_setup_irq_remapping(struct intel_iommu *iommu, int mode)
ir_table->base = page_address(pages);
ir_table->bitmap = bitmap;
+ iommu->ir_table = ir_table;
- iommu_set_irq_remapping(iommu, mode);
return 0;
}
+static void intel_teardown_irq_remapping(struct intel_iommu *iommu)
+{
+ if (iommu && iommu->ir_table) {
+ free_pages((unsigned long)iommu->ir_table->base,
+ INTR_REMAP_PAGE_ORDER);
+ kfree(iommu->ir_table->bitmap);
+ kfree(iommu->ir_table);
+ iommu->ir_table = NULL;
+ }
+}
+
/*
* Disable Interrupt Remapping.
*/
@@ -667,9 +677,10 @@ static int __init intel_enable_irq_remapping(void)
if (!ecap_ir_support(iommu->ecap))
continue;
- if (intel_setup_irq_remapping(iommu, eim))
+ if (intel_setup_irq_remapping(iommu))
goto error;
+ iommu_set_irq_remapping(iommu, eim);
setup = 1;
}
@@ -700,12 +711,13 @@ error:
return -1;
}
-static void ir_parse_one_hpet_scope(struct acpi_dmar_device_scope *scope,
- struct intel_iommu *iommu)
+static int ir_parse_one_hpet_scope(struct acpi_dmar_device_scope *scope,
+ struct intel_iommu *iommu,
+ struct acpi_dmar_hardware_unit *drhd)
{
struct acpi_dmar_pci_path *path;
u8 bus;
- int count;
+ int count, free = -1;
bus = scope->bus;
path = (struct acpi_dmar_pci_path *)(scope + 1);
@@ -721,19 +733,36 @@ static void ir_parse_one_hpet_scope(struct acpi_dmar_device_scope *scope,
PCI_SECONDARY_BUS);
path++;
}
- ir_hpet[ir_hpet_num].bus = bus;
- ir_hpet[ir_hpet_num].devfn = PCI_DEVFN(path->device, path->function);
- ir_hpet[ir_hpet_num].iommu = iommu;
- ir_hpet[ir_hpet_num].id = scope->enumeration_id;
- ir_hpet_num++;
+
+ for (count = 0; count < MAX_HPET_TBS; count++) {
+ if (ir_hpet[count].iommu == iommu &&
+ ir_hpet[count].id == scope->enumeration_id)
+ return 0;
+ else if (ir_hpet[count].iommu == NULL && free == -1)
+ free = count;
+ }
+ if (free == -1) {
+ pr_warn("Exceeded Max HPET blocks\n");
+ return -ENOSPC;
+ }
+
+ ir_hpet[free].iommu = iommu;
+ ir_hpet[free].id = scope->enumeration_id;
+ ir_hpet[free].bus = bus;
+ ir_hpet[free].devfn = PCI_DEVFN(path->device, path->function);
+ pr_info("HPET id %d under DRHD base 0x%Lx\n",
+ scope->enumeration_id, drhd->address);
+
+ return 0;
}
-static void ir_parse_one_ioapic_scope(struct acpi_dmar_device_scope *scope,
- struct intel_iommu *iommu)
+static int ir_parse_one_ioapic_scope(struct acpi_dmar_device_scope *scope,
+ struct intel_iommu *iommu,
+ struct acpi_dmar_hardware_unit *drhd)
{
struct acpi_dmar_pci_path *path;
u8 bus;
- int count;
+ int count, free = -1;
bus = scope->bus;
path = (struct acpi_dmar_pci_path *)(scope + 1);
@@ -750,54 +779,63 @@ static void ir_parse_one_ioapic_scope(struct acpi_dmar_device_scope *scope,
path++;
}
- ir_ioapic[ir_ioapic_num].bus = bus;
- ir_ioapic[ir_ioapic_num].devfn = PCI_DEVFN(path->device, path->function);
- ir_ioapic[ir_ioapic_num].iommu = iommu;
- ir_ioapic[ir_ioapic_num].id = scope->enumeration_id;
- ir_ioapic_num++;
+ for (count = 0; count < MAX_IO_APICS; count++) {
+ if (ir_ioapic[count].iommu == iommu &&
+ ir_ioapic[count].id == scope->enumeration_id)
+ return 0;
+ else if (ir_ioapic[count].iommu == NULL && free == -1)
+ free = count;
+ }
+ if (free == -1) {
+ pr_warn("Exceeded Max IO APICS\n");
+ return -ENOSPC;
+ }
+
+ ir_ioapic[free].bus = bus;
+ ir_ioapic[free].devfn = PCI_DEVFN(path->device, path->function);
+ ir_ioapic[free].iommu = iommu;
+ ir_ioapic[free].id = scope->enumeration_id;
+ pr_info("IOAPIC id %d under DRHD base 0x%Lx IOMMU %d\n",
+ scope->enumeration_id, drhd->address, iommu->seq_id);
+
+ return 0;
}
static int ir_parse_ioapic_hpet_scope(struct acpi_dmar_header *header,
struct intel_iommu *iommu)
{
+ int ret = 0;
struct acpi_dmar_hardware_unit *drhd;
struct acpi_dmar_device_scope *scope;
void *start, *end;
drhd = (struct acpi_dmar_hardware_unit *)header;
-
start = (void *)(drhd + 1);
end = ((void *)drhd) + header->length;
- while (start < end) {
+ while (start < end && ret == 0) {
scope = start;
- if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_IOAPIC) {
- if (ir_ioapic_num == MAX_IO_APICS) {
- printk(KERN_WARNING "Exceeded Max IO APICS\n");
- return -1;
- }
-
- printk(KERN_INFO "IOAPIC id %d under DRHD base "
- " 0x%Lx IOMMU %d\n", scope->enumeration_id,
- drhd->address, iommu->seq_id);
+ if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_IOAPIC)
+ ret = ir_parse_one_ioapic_scope(scope, iommu, drhd);
+ else if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_HPET)
+ ret = ir_parse_one_hpet_scope(scope, iommu, drhd);
+ start += scope->length;
+ }
- ir_parse_one_ioapic_scope(scope, iommu);
- } else if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_HPET) {
- if (ir_hpet_num == MAX_HPET_TBS) {
- printk(KERN_WARNING "Exceeded Max HPET blocks\n");
- return -1;
- }
+ return ret;
+}
- printk(KERN_INFO "HPET id %d under DRHD base"
- " 0x%Lx\n", scope->enumeration_id,
- drhd->address);
+static void ir_remove_ioapic_hpet_scope(struct intel_iommu *iommu)
+{
+ int i;
- ir_parse_one_hpet_scope(scope, iommu);
- }
- start += scope->length;
- }
+ for (i = 0; i < MAX_HPET_TBS; i++)
+ if (ir_hpet[i].iommu == iommu)
+ ir_hpet[i].iommu = NULL;
- return 0;
+ for (i = 0; i < MAX_IO_APICS; i++)
+ if (ir_ioapic[i].iommu == iommu)
+ ir_ioapic[i].iommu = NULL;
}
/*
@@ -1173,7 +1211,85 @@ struct irq_remap_ops intel_irq_remap_ops = {
.setup_hpet_msi = intel_setup_hpet_msi,
};
+/*
+ * Support of Interrupt Remapping Unit Hotplug
+ */
+static int dmar_ir_add(struct dmar_drhd_unit *dmaru, struct intel_iommu *iommu)
+{
+ int ret;
+ int eim = x2apic_enabled();
+
+ if (eim && !ecap_eim_support(iommu->ecap)) {
+ pr_info("DRHD %Lx: EIM not supported by DRHD, ecap %Lx\n",
+ iommu->reg_phys, iommu->ecap);
+ return -ENODEV;
+ }
+
+ if (ir_parse_ioapic_hpet_scope(dmaru->hdr, iommu)) {
+ pr_warn("DRHD %Lx: failed to parse managed IOAPIC/HPET\n",
+ iommu->reg_phys);
+ return -ENODEV;
+ }
+
+ /* TODO: check all IOAPICs are covered by IOMMU */
+
+ /* Setup Interrupt-remapping now. */
+ ret = intel_setup_irq_remapping(iommu);
+ if (ret) {
+ pr_err("DRHD %Lx: failed to allocate resource\n",
+ iommu->reg_phys);
+ ir_remove_ioapic_hpet_scope(iommu);
+ return ret;
+ }
+
+ if (!iommu->qi) {
+ /* Clear previous faults. */
+ dmar_fault(-1, iommu);
+ iommu_disable_irq_remapping(iommu);
+ dmar_disable_qi(iommu);
+ }
+
+ /* Enable queued invalidation */
+ ret = dmar_enable_qi(iommu);
+ if (!ret) {
+ iommu_set_irq_remapping(iommu, eim);
+ } else {
+ pr_err("DRHD %Lx: failed to enable queued invalidation, ecap %Lx, ret %d\n",
+ iommu->reg_phys, iommu->ecap, ret);
+ intel_teardown_irq_remapping(iommu);
+ ir_remove_ioapic_hpet_scope(iommu);
+ }
+
+ return ret;
+}
+
int dmar_ir_hotplug(struct dmar_drhd_unit *dmaru, bool insert)
{
- return irq_remapping_enabled ? -ENOSYS : 0;
+ int ret = 0;
+ struct intel_iommu *iommu = dmaru->iommu;
+
+ if (!irq_remapping_enabled)
+ return 0;
+ if (iommu == NULL)
+ return -EINVAL;
+ if (!ecap_ir_support(iommu->ecap))
+ return 0;
+
+ if (insert) {
+ if (!iommu->ir_table)
+ ret = dmar_ir_add(dmaru, iommu);
+ } else {
+ if (iommu->ir_table) {
+ if (!bitmap_empty(iommu->ir_table->bitmap,
+ INTR_REMAP_TABLE_ENTRIES)) {
+ ret = -EBUSY;
+ } else {
+ iommu_disable_irq_remapping(iommu);
+ intel_teardown_irq_remapping(iommu);
+ ir_remove_ioapic_hpet_scope(iommu);
+ }
+ }
+ }
+
+ return ret;
}
--
1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: Jiang Liu <jiang.liu@linux.intel.com>
To: Joerg Roedel <joro@8bytes.org>,
David Woodhouse <dwmw2@infradead.org>,
Yinghai Lu <yinghai@kernel.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Dan Williams <dan.j.williams@intel.com>,
Vinod Koul <vinod.koul@intel.com>,
"Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>,
Ashok Raj <ashok.raj@intel.com>,
Yijing Wang <wangyijing@huawei.com>,
Tony Luck <tony.luck@intel.com>,
iommu@lists.linux-foundation.org, linux-pci@vger.kernel.org,
linux-hotplug@vger.kernel.org, linux-kernel@vger.kernel.org,
dmaengine@vger.kernel.org
Subject: [Patch Part3 V5 5/8] iommu/vt-d: Enhance intel_irq_remapping driver to support DMAR unit hotplug
Date: Fri, 12 Sep 2014 10:10:45 +0800 [thread overview]
Message-ID: <1410487848-6027-6-git-send-email-jiang.liu@linux.intel.com> (raw)
In-Reply-To: <1410487848-6027-1-git-send-email-jiang.liu@linux.intel.com>
Implement required callback functions for intel_irq_remapping driver
to support DMAR unit hotplug.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
---
drivers/iommu/intel_irq_remapping.c | 222 ++++++++++++++++++++++++++---------
1 file changed, 169 insertions(+), 53 deletions(-)
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index 9b140ed854ec..7cf31a29f77a 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -36,7 +36,6 @@ struct hpet_scope {
static struct ioapic_scope ir_ioapic[MAX_IO_APICS];
static struct hpet_scope ir_hpet[MAX_HPET_TBS];
-static int ir_ioapic_num, ir_hpet_num;
/*
* Lock ordering:
@@ -325,7 +324,7 @@ static int set_ioapic_sid(struct irte *irte, int apic)
down_read(&dmar_global_lock);
for (i = 0; i < MAX_IO_APICS; i++) {
- if (ir_ioapic[i].id == apic) {
+ if (ir_ioapic[i].iommu && ir_ioapic[i].id == apic) {
sid = (ir_ioapic[i].bus << 8) | ir_ioapic[i].devfn;
break;
}
@@ -352,7 +351,7 @@ static int set_hpet_sid(struct irte *irte, u8 id)
down_read(&dmar_global_lock);
for (i = 0; i < MAX_HPET_TBS; i++) {
- if (ir_hpet[i].id == id) {
+ if (ir_hpet[i].iommu && ir_hpet[i].id == id) {
sid = (ir_hpet[i].bus << 8) | ir_hpet[i].devfn;
break;
}
@@ -474,17 +473,17 @@ static void iommu_set_irq_remapping(struct intel_iommu *iommu, int mode)
raw_spin_unlock_irqrestore(&iommu->register_lock, flags);
}
-
-static int intel_setup_irq_remapping(struct intel_iommu *iommu, int mode)
+static int intel_setup_irq_remapping(struct intel_iommu *iommu)
{
struct ir_table *ir_table;
struct page *pages;
unsigned long *bitmap;
- ir_table = iommu->ir_table = kzalloc(sizeof(struct ir_table),
- GFP_ATOMIC);
+ if (iommu->ir_table)
+ return 0;
- if (!iommu->ir_table)
+ ir_table = kzalloc(sizeof(struct ir_table), GFP_ATOMIC);
+ if (!ir_table)
return -ENOMEM;
pages = alloc_pages_node(iommu->node, GFP_ATOMIC | __GFP_ZERO,
@@ -493,7 +492,7 @@ static int intel_setup_irq_remapping(struct intel_iommu *iommu, int mode)
if (!pages) {
pr_err("IR%d: failed to allocate pages of order %d\n",
iommu->seq_id, INTR_REMAP_PAGE_ORDER);
- kfree(iommu->ir_table);
+ kfree(ir_table);
return -ENOMEM;
}
@@ -508,11 +507,22 @@ static int intel_setup_irq_remapping(struct intel_iommu *iommu, int mode)
ir_table->base = page_address(pages);
ir_table->bitmap = bitmap;
+ iommu->ir_table = ir_table;
- iommu_set_irq_remapping(iommu, mode);
return 0;
}
+static void intel_teardown_irq_remapping(struct intel_iommu *iommu)
+{
+ if (iommu && iommu->ir_table) {
+ free_pages((unsigned long)iommu->ir_table->base,
+ INTR_REMAP_PAGE_ORDER);
+ kfree(iommu->ir_table->bitmap);
+ kfree(iommu->ir_table);
+ iommu->ir_table = NULL;
+ }
+}
+
/*
* Disable Interrupt Remapping.
*/
@@ -667,9 +677,10 @@ static int __init intel_enable_irq_remapping(void)
if (!ecap_ir_support(iommu->ecap))
continue;
- if (intel_setup_irq_remapping(iommu, eim))
+ if (intel_setup_irq_remapping(iommu))
goto error;
+ iommu_set_irq_remapping(iommu, eim);
setup = 1;
}
@@ -700,12 +711,13 @@ error:
return -1;
}
-static void ir_parse_one_hpet_scope(struct acpi_dmar_device_scope *scope,
- struct intel_iommu *iommu)
+static int ir_parse_one_hpet_scope(struct acpi_dmar_device_scope *scope,
+ struct intel_iommu *iommu,
+ struct acpi_dmar_hardware_unit *drhd)
{
struct acpi_dmar_pci_path *path;
u8 bus;
- int count;
+ int count, free = -1;
bus = scope->bus;
path = (struct acpi_dmar_pci_path *)(scope + 1);
@@ -721,19 +733,36 @@ static void ir_parse_one_hpet_scope(struct acpi_dmar_device_scope *scope,
PCI_SECONDARY_BUS);
path++;
}
- ir_hpet[ir_hpet_num].bus = bus;
- ir_hpet[ir_hpet_num].devfn = PCI_DEVFN(path->device, path->function);
- ir_hpet[ir_hpet_num].iommu = iommu;
- ir_hpet[ir_hpet_num].id = scope->enumeration_id;
- ir_hpet_num++;
+
+ for (count = 0; count < MAX_HPET_TBS; count++) {
+ if (ir_hpet[count].iommu == iommu &&
+ ir_hpet[count].id == scope->enumeration_id)
+ return 0;
+ else if (ir_hpet[count].iommu == NULL && free == -1)
+ free = count;
+ }
+ if (free == -1) {
+ pr_warn("Exceeded Max HPET blocks\n");
+ return -ENOSPC;
+ }
+
+ ir_hpet[free].iommu = iommu;
+ ir_hpet[free].id = scope->enumeration_id;
+ ir_hpet[free].bus = bus;
+ ir_hpet[free].devfn = PCI_DEVFN(path->device, path->function);
+ pr_info("HPET id %d under DRHD base 0x%Lx\n",
+ scope->enumeration_id, drhd->address);
+
+ return 0;
}
-static void ir_parse_one_ioapic_scope(struct acpi_dmar_device_scope *scope,
- struct intel_iommu *iommu)
+static int ir_parse_one_ioapic_scope(struct acpi_dmar_device_scope *scope,
+ struct intel_iommu *iommu,
+ struct acpi_dmar_hardware_unit *drhd)
{
struct acpi_dmar_pci_path *path;
u8 bus;
- int count;
+ int count, free = -1;
bus = scope->bus;
path = (struct acpi_dmar_pci_path *)(scope + 1);
@@ -750,54 +779,63 @@ static void ir_parse_one_ioapic_scope(struct acpi_dmar_device_scope *scope,
path++;
}
- ir_ioapic[ir_ioapic_num].bus = bus;
- ir_ioapic[ir_ioapic_num].devfn = PCI_DEVFN(path->device, path->function);
- ir_ioapic[ir_ioapic_num].iommu = iommu;
- ir_ioapic[ir_ioapic_num].id = scope->enumeration_id;
- ir_ioapic_num++;
+ for (count = 0; count < MAX_IO_APICS; count++) {
+ if (ir_ioapic[count].iommu == iommu &&
+ ir_ioapic[count].id == scope->enumeration_id)
+ return 0;
+ else if (ir_ioapic[count].iommu == NULL && free == -1)
+ free = count;
+ }
+ if (free == -1) {
+ pr_warn("Exceeded Max IO APICS\n");
+ return -ENOSPC;
+ }
+
+ ir_ioapic[free].bus = bus;
+ ir_ioapic[free].devfn = PCI_DEVFN(path->device, path->function);
+ ir_ioapic[free].iommu = iommu;
+ ir_ioapic[free].id = scope->enumeration_id;
+ pr_info("IOAPIC id %d under DRHD base 0x%Lx IOMMU %d\n",
+ scope->enumeration_id, drhd->address, iommu->seq_id);
+
+ return 0;
}
static int ir_parse_ioapic_hpet_scope(struct acpi_dmar_header *header,
struct intel_iommu *iommu)
{
+ int ret = 0;
struct acpi_dmar_hardware_unit *drhd;
struct acpi_dmar_device_scope *scope;
void *start, *end;
drhd = (struct acpi_dmar_hardware_unit *)header;
-
start = (void *)(drhd + 1);
end = ((void *)drhd) + header->length;
- while (start < end) {
+ while (start < end && ret == 0) {
scope = start;
- if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_IOAPIC) {
- if (ir_ioapic_num == MAX_IO_APICS) {
- printk(KERN_WARNING "Exceeded Max IO APICS\n");
- return -1;
- }
-
- printk(KERN_INFO "IOAPIC id %d under DRHD base "
- " 0x%Lx IOMMU %d\n", scope->enumeration_id,
- drhd->address, iommu->seq_id);
+ if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_IOAPIC)
+ ret = ir_parse_one_ioapic_scope(scope, iommu, drhd);
+ else if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_HPET)
+ ret = ir_parse_one_hpet_scope(scope, iommu, drhd);
+ start += scope->length;
+ }
- ir_parse_one_ioapic_scope(scope, iommu);
- } else if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_HPET) {
- if (ir_hpet_num == MAX_HPET_TBS) {
- printk(KERN_WARNING "Exceeded Max HPET blocks\n");
- return -1;
- }
+ return ret;
+}
- printk(KERN_INFO "HPET id %d under DRHD base"
- " 0x%Lx\n", scope->enumeration_id,
- drhd->address);
+static void ir_remove_ioapic_hpet_scope(struct intel_iommu *iommu)
+{
+ int i;
- ir_parse_one_hpet_scope(scope, iommu);
- }
- start += scope->length;
- }
+ for (i = 0; i < MAX_HPET_TBS; i++)
+ if (ir_hpet[i].iommu == iommu)
+ ir_hpet[i].iommu = NULL;
- return 0;
+ for (i = 0; i < MAX_IO_APICS; i++)
+ if (ir_ioapic[i].iommu == iommu)
+ ir_ioapic[i].iommu = NULL;
}
/*
@@ -1173,7 +1211,85 @@ struct irq_remap_ops intel_irq_remap_ops = {
.setup_hpet_msi = intel_setup_hpet_msi,
};
+/*
+ * Support of Interrupt Remapping Unit Hotplug
+ */
+static int dmar_ir_add(struct dmar_drhd_unit *dmaru, struct intel_iommu *iommu)
+{
+ int ret;
+ int eim = x2apic_enabled();
+
+ if (eim && !ecap_eim_support(iommu->ecap)) {
+ pr_info("DRHD %Lx: EIM not supported by DRHD, ecap %Lx\n",
+ iommu->reg_phys, iommu->ecap);
+ return -ENODEV;
+ }
+
+ if (ir_parse_ioapic_hpet_scope(dmaru->hdr, iommu)) {
+ pr_warn("DRHD %Lx: failed to parse managed IOAPIC/HPET\n",
+ iommu->reg_phys);
+ return -ENODEV;
+ }
+
+ /* TODO: check all IOAPICs are covered by IOMMU */
+
+ /* Setup Interrupt-remapping now. */
+ ret = intel_setup_irq_remapping(iommu);
+ if (ret) {
+ pr_err("DRHD %Lx: failed to allocate resource\n",
+ iommu->reg_phys);
+ ir_remove_ioapic_hpet_scope(iommu);
+ return ret;
+ }
+
+ if (!iommu->qi) {
+ /* Clear previous faults. */
+ dmar_fault(-1, iommu);
+ iommu_disable_irq_remapping(iommu);
+ dmar_disable_qi(iommu);
+ }
+
+ /* Enable queued invalidation */
+ ret = dmar_enable_qi(iommu);
+ if (!ret) {
+ iommu_set_irq_remapping(iommu, eim);
+ } else {
+ pr_err("DRHD %Lx: failed to enable queued invalidation, ecap %Lx, ret %d\n",
+ iommu->reg_phys, iommu->ecap, ret);
+ intel_teardown_irq_remapping(iommu);
+ ir_remove_ioapic_hpet_scope(iommu);
+ }
+
+ return ret;
+}
+
int dmar_ir_hotplug(struct dmar_drhd_unit *dmaru, bool insert)
{
- return irq_remapping_enabled ? -ENOSYS : 0;
+ int ret = 0;
+ struct intel_iommu *iommu = dmaru->iommu;
+
+ if (!irq_remapping_enabled)
+ return 0;
+ if (iommu == NULL)
+ return -EINVAL;
+ if (!ecap_ir_support(iommu->ecap))
+ return 0;
+
+ if (insert) {
+ if (!iommu->ir_table)
+ ret = dmar_ir_add(dmaru, iommu);
+ } else {
+ if (iommu->ir_table) {
+ if (!bitmap_empty(iommu->ir_table->bitmap,
+ INTR_REMAP_TABLE_ENTRIES)) {
+ ret = -EBUSY;
+ } else {
+ iommu_disable_irq_remapping(iommu);
+ intel_teardown_irq_remapping(iommu);
+ ir_remove_ioapic_hpet_scope(iommu);
+ }
+ }
+ }
+
+ return ret;
}
--
1.7.10.4
next prev parent reply other threads:[~2014-09-12 2:10 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-12 2:10 [Patch Part3 V5 0/8] Enable support of Intel DMAR device hotplug Jiang Liu
2014-09-12 2:10 ` Jiang Liu
2014-09-12 2:10 ` Jiang Liu
2014-09-12 2:10 ` [Patch Part3 V5 1/8] iommu/vt-d: Introduce helper function dmar_walk_resources() Jiang Liu
2014-09-12 2:10 ` Jiang Liu
2014-09-12 2:10 ` Jiang Liu
2014-09-12 9:16 ` Yijing Wang
2014-09-12 9:16 ` Yijing Wang
2014-09-12 9:16 ` Yijing Wang
2014-09-16 7:13 ` Jiang Liu
2014-09-16 7:13 ` Jiang Liu
2014-09-16 7:13 ` Jiang Liu
2014-09-16 8:08 ` Yijing Wang
2014-09-16 8:08 ` Yijing Wang
2014-09-16 8:08 ` Yijing Wang
2014-09-12 2:10 ` [Patch Part3 V5 2/8] iommu/vt-d: Dynamically allocate and free seq_id for DMAR units Jiang Liu
2014-09-12 2:10 ` Jiang Liu
2014-09-12 2:10 ` Jiang Liu
2014-09-12 9:16 ` Yijing Wang
2014-09-12 9:16 ` Yijing Wang
2014-09-12 9:16 ` Yijing Wang
2014-09-12 2:10 ` [Patch Part3 V5 3/8] iommu/vt-d: Implement DMAR unit hotplug framework Jiang Liu
2014-09-12 2:10 ` Jiang Liu
2014-09-12 2:10 ` Jiang Liu
2014-09-15 1:40 ` Yijing Wang
2014-09-15 1:40 ` Yijing Wang
2014-09-15 1:40 ` Yijing Wang
2014-09-12 2:10 ` [Patch Part3 V5 4/8] iommu/vt-d: Search for ACPI _DSM method for DMAR hotplug Jiang Liu
2014-09-12 2:10 ` Jiang Liu
2014-09-12 2:10 ` Jiang Liu
2014-09-15 1:53 ` Yijing Wang
2014-09-15 1:53 ` Yijing Wang
2014-09-15 1:53 ` Yijing Wang
2014-09-12 2:10 ` Jiang Liu [this message]
2014-09-12 2:10 ` [Patch Part3 V5 5/8] iommu/vt-d: Enhance intel_irq_remapping driver to support DMAR unit hotplug Jiang Liu
2014-09-12 2:10 ` Jiang Liu
2014-09-15 2:20 ` Yijing Wang
2014-09-15 2:20 ` Yijing Wang
2014-09-15 2:20 ` Yijing Wang
2014-09-16 7:00 ` Jiang Liu
2014-09-16 7:00 ` Jiang Liu
2014-09-16 7:00 ` Jiang Liu
2014-09-16 7:53 ` Yijing Wang
2014-09-16 7:53 ` Yijing Wang
2014-09-16 7:53 ` Yijing Wang
2014-09-16 8:13 ` Jiang Liu
2014-09-16 8:13 ` Jiang Liu
2014-09-16 8:13 ` Jiang Liu
2014-09-12 2:10 ` [Patch Part3 V5 6/8] iommu/vt-d: Enhance error recovery in function intel_enable_irq_remapping() Jiang Liu
2014-09-12 2:10 ` Jiang Liu
2014-09-12 2:10 ` Jiang Liu
2014-09-15 2:25 ` Yijing Wang
2014-09-15 2:25 ` Yijing Wang
2014-09-15 2:25 ` Yijing Wang
2014-09-12 2:10 ` [Patch Part3 V5 7/8] iommu/vt-d: Enhance intel-iommu driver to support DMAR unit hotplug Jiang Liu
2014-09-12 2:10 ` Jiang Liu
2014-09-12 2:10 ` Jiang Liu
2014-09-15 2:53 ` Yijing Wang
2014-09-15 2:53 ` Yijing Wang
2014-09-15 2:53 ` Yijing Wang
2014-09-12 2:10 ` [Patch Part3 V5 8/8] pci, ACPI, iommu: Enhance pci_root to support DMAR device hotplug Jiang Liu
2014-09-12 2:10 ` Jiang Liu
2014-09-12 2:10 ` Jiang Liu
2014-09-15 3:28 ` Yijing Wang
2014-09-15 3:28 ` Yijing Wang
2014-09-15 3:28 ` Yijing Wang
2014-09-15 7:54 ` [Patch Part3 V5 0/8] Enable support of Intel " Yijing Wang
2014-09-15 7:54 ` Yijing Wang
2014-09-15 7:54 ` Yijing Wang
2014-09-16 7:17 ` Jiang Liu
2014-09-16 7:17 ` Jiang Liu
2014-09-16 7:17 ` Jiang Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1410487848-6027-6-git-send-email-jiang.liu@linux.intel.com \
--to=jiang.liu@linux.intel.com \
--cc=ashok.raj@intel.com \
--cc=bhelgaas@google.com \
--cc=dan.j.williams@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=linux-hotplug@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=rafael.j.wysocki@intel.com \
--cc=tony.luck@intel.com \
--cc=vinod.koul@intel.com \
--cc=wangyijing@huawei.com \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.