[PATCH 2/6] GICv3: Add ITS entry to THUNDER dts

[Robert Richter <rric@kernel.org>]

From: Tirumalesh Chalamarla <tchalamarla@cavium.com>

The PCIe host controller uses MSIs provided by GICv3 ITS. Enable it on
Thunder SoCs by adding an entry to DT.

Signed-off-by: Tirumalesh Chalamarla <tchalamarla@cavium.com>
Signed-off-by: Robert Richter <rrichter@cavium.com>
---
 arch/arm64/boot/dts/thunder-88xx.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/thunder-88xx.dtsi b/arch/arm64/boot/dts/thunder-88xx.dtsi
index d8c0bdc51882..9cb7cf94284a 100644
--- a/arch/arm64/boot/dts/thunder-88xx.dtsi
+++ b/arch/arm64/boot/dts/thunder-88xx.dtsi
@@ -376,10 +376,19 @@
 		gic0: interrupt-controller@8010,00000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
 			interrupt-controller;
 			reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */
 			      <0x8010 0x80000000 0x0 0x600000>; /* GICR */
 			interrupts = <1 9 0xf04>;
+
+			its: gic-its@8010,00020000 {
+				compatible = "arm,gic-v3-its";
+				msi-controller;
+				reg = <0x8010 0x20000 0x0 0x200000>;
+			};
 		};
 
 		uaa0: serial@87e0,24000000 {
-- 
2.1.0