From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Robin Gong <b38343@freescale.com>
Cc: vinod.koul@intel.com, dan.j.williams@intel.com,
dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 3/3] dma: imx-sdma: reorg code to make code clean
Date: Tue, 21 Oct 2014 12:39:35 +0300 [thread overview]
Message-ID: <1413884375.2396.23.camel@linux.intel.com> (raw)
In-Reply-To: <1413853781-18384-4-git-send-email-b38343@freescale.com>
On Tue, 2014-10-21 at 09:09 +0800, Robin Gong wrote:
> code reorg for transfer prepare and bus width check.
Fix style of commit message.
>
> Signed-off-by: Robin Gong <b38343@freescale.com>
> ---
> drivers/dma/imx-sdma.c | 127 +++++++++++++++++++++++--------------------------
> 1 file changed, 60 insertions(+), 67 deletions(-)
>
> diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
> index 7e8aa2d..b0365c2 100644
> --- a/drivers/dma/imx-sdma.c
> +++ b/drivers/dma/imx-sdma.c
> @@ -1026,6 +1026,52 @@ static void sdma_free_chan_resources(struct dma_chan *chan)
> clk_disable(sdma->clk_ahb);
> }
>
> +static int sdma_transfer_init(struct sdma_channel *sdmac,
> + enum dma_transfer_direction direction)
> +{
> + int ret = 0;
Redundant assignment.
> +
> + sdmac->status = DMA_IN_PROGRESS;
> + sdmac->buf_tail = 0;
> + sdmac->flags = 0;
> + sdmac->direction = direction;
> +
> + ret = sdma_load_context(sdmac);
> + if (ret)
> + return ret;
> +
> + sdmac->chn_count = 0;
> +
> + return ret;
> +}
> +
> +static int check_bd_buswidth(struct sdma_buffer_descriptor *bd,
> + struct sdma_channel *sdmac, int count,
> + dma_addr_t dma_dst, dma_addr_t dma_src)
> +{
> + int ret = 0;
> +
> + switch (sdmac->word_size) {
> + case DMA_SLAVE_BUSWIDTH_4_BYTES:
> + bd->mode.command = 0;
> + if ((count | dma_dst | dma_src) & 3)
> + ret = -EINVAL;
> + break;
> + case DMA_SLAVE_BUSWIDTH_2_BYTES:
> + bd->mode.command = 2;
> + if ((count | dma_dst | dma_src) & 1)
> + ret = -EINVAL;
> + break;
> + case DMA_SLAVE_BUSWIDTH_1_BYTE:
> + bd->mode.command = 1;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return ret;
> +}
> +
> static struct dma_async_tx_descriptor *sdma_prep_memcpy(
> struct dma_chan *chan, dma_addr_t dma_dst,
> dma_addr_t dma_src, size_t len, unsigned long flags)
> @@ -1034,7 +1080,7 @@ static struct dma_async_tx_descriptor *sdma_prep_memcpy(
> struct sdma_engine *sdma = sdmac->sdma;
> int channel = sdmac->channel;
> size_t count;
> - int i = 0, param, ret;
> + int i = 0, param;
> struct sdma_buffer_descriptor *bd;
>
> if (!chan || !len || sdmac->status == DMA_IN_PROGRESS)
> @@ -1046,21 +1092,12 @@ static struct dma_async_tx_descriptor *sdma_prep_memcpy(
> goto err_out;
> }
>
> - sdmac->status = DMA_IN_PROGRESS;
> -
> - sdmac->buf_tail = 0;
> -
> dev_dbg(sdma->dev, "memcpy: %pad->%pad, len=%zu, channel=%d.\n",
> &dma_src, &dma_dst, len, channel);
>
> - sdmac->direction = DMA_MEM_TO_MEM;
> -
> - ret = sdma_load_context(sdmac);
> - if (ret)
> + if (sdma_transfer_init(sdmac, DMA_MEM_TO_MEM))
> goto err_out;
>
> - sdmac->chn_count = 0;
> -
> do {
> count = min_t(size_t, len, SDMA_BD_MAX_CNT);
> bd = &sdmac->bd[i];
> @@ -1068,28 +1105,8 @@ static struct dma_async_tx_descriptor *sdma_prep_memcpy(
> bd->ext_buffer_addr = dma_dst;
> bd->mode.count = count;
>
> - if (sdmac->word_size > DMA_SLAVE_BUSWIDTH_4_BYTES) {
> - ret = -EINVAL;
> + if (check_bd_buswidth(bd, sdmac, count, dma_dst, dma_src))
> goto err_out;
> - }
> -
> - switch (sdmac->word_size) {
> - case DMA_SLAVE_BUSWIDTH_4_BYTES:
> - bd->mode.command = 0;
> - if ((count | dma_dst | dma_src) & 3)
> - return NULL;
> - break;
> - case DMA_SLAVE_BUSWIDTH_2_BYTES:
> - bd->mode.command = 2;
> - if ((count | dma_dst | dma_src) & 1)
> - return NULL;
> - break;
> - case DMA_SLAVE_BUSWIDTH_1_BYTE:
> - bd->mode.command = 1;
> - break;
> - default:
> - return NULL;
> - }
>
> dma_src += count;
> dma_dst += count;
> @@ -1141,21 +1158,10 @@ static struct dma_async_tx_descriptor *sdma_prep_sg(
>
> if (sdmac->status == DMA_IN_PROGRESS)
> return NULL;
> - sdmac->status = DMA_IN_PROGRESS;
> -
> - sdmac->flags = 0;
> -
> - sdmac->buf_tail = 0;
>
> dev_dbg(sdma->dev, "setting up %d entries for channel %d.\n",
> src_nents, channel);
>
> - sdmac->direction = direction;
> -
> - ret = sdma_load_context(sdmac);
> - if (ret)
> - goto err_out;
> -
> if (src_nents > NUM_BD) {
> dev_err(sdma->dev, "SDMA channel %d: maximum number of sg exceeded: %d > %d\n",
> channel, src_nents, NUM_BD);
> @@ -1163,7 +1169,9 @@ static struct dma_async_tx_descriptor *sdma_prep_sg(
> goto err_out;
> }
>
> - sdmac->chn_count = 0;
> + if (sdma_transfer_init(sdmac, direction))
> + goto err_out;
> +
> for_each_sg(src_sg, sg_src, src_nents, i) {
> struct sdma_buffer_descriptor *bd = &sdmac->bd[i];
> int param;
> @@ -1187,30 +1195,15 @@ static struct dma_async_tx_descriptor *sdma_prep_sg(
> bd->mode.count = count;
> sdmac->chn_count += count;
>
> - if (sdmac->word_size > DMA_SLAVE_BUSWIDTH_4_BYTES) {
> - ret = -EINVAL;
> + if (direction == DMA_MEM_TO_MEM)
> + ret = check_bd_buswidth(bd, sdmac, count,
> + sg_dst->dma_address,
> + sg_src->dma_address);
> + else
> + ret = check_bd_buswidth(bd, sdmac, count, 0,
> + sg_src->dma_address);
> + if (ret)
> goto err_out;
> - }
> -
> - switch (sdmac->word_size) {
> - case DMA_SLAVE_BUSWIDTH_4_BYTES:
> - bd->mode.command = 0;
> - if ((count | sg_src->dma_address | (sg_dst &&
> - (sg_dst->dma_address))) & 3)
> - return NULL;
> - break;
> - case DMA_SLAVE_BUSWIDTH_2_BYTES:
> - bd->mode.command = 2;
> - if ((count | sg_src->dma_address |
> - (sg_dst && (sg_dst->dma_address))) & 1)
> - return NULL;
> - break;
> - case DMA_SLAVE_BUSWIDTH_1_BYTE:
> - bd->mode.command = 1;
> - break;
> - default:
> - return NULL;
> - }
>
> param = BD_DONE | BD_EXTD | BD_CONT;
>
--
Andy Shevchenko <andriy.shevchenko@intel.com>
Intel Finland Oy
next prev parent reply other threads:[~2014-10-21 9:39 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-21 1:09 [PATCH v4 0/3] dma: imx-sdma: add support for sdma memory copy Robin Gong
2014-10-21 1:09 ` [PATCH v4 1/3] " Robin Gong
2014-10-21 9:35 ` Andy Shevchenko
2014-10-21 1:09 ` [PATCH v4 2/3] dma: imx-sdma: correct print format Robin Gong
2014-10-21 9:38 ` Andy Shevchenko
2014-10-21 1:09 ` [PATCH v4 3/3] dma: imx-sdma: reorg code to make code clean Robin Gong
2014-10-21 9:39 ` Andy Shevchenko [this message]
2014-10-22 5:42 ` Robin Gong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1413884375.2396.23.camel@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=b38343@freescale.com \
--cc=dan.j.williams@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.