Re: [RESUBMIT PATCH v6 1/8] mfd: Add support for Skyworks SKY81452 driver

[Paul Bolle <pebolle-IWqWACnzNjzz+pZb47iToQ@public.gmane.org>]

On Mon, 2014-11-03 at 17:14 +0000, Lee Jones wrote:
>On Fri, 31 Oct 2014, gyungoh-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote:
> Code looks fine, but what are its dependencies.  I'm assuming nothing;
> however, did Mark say that something depends on it?

That would be REGULATOR_SKY81452. That is currently dangling (since
v3.18-rc1) as it depends on the non-existent symbol SKY81452.

> If so, what and what are you going to do about it?

See 7/8. That patch makes REGULATOR_SKY81452 depend on MFD_SKY81452,
making it buildable.

> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > index 1456ea7..a54244c 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -693,6 +693,18 @@ config MFD_SM501_GPIO
> >  	 lines on the SM501. The platform data is used to supply the
> >  	 base number for the first GPIO line to register.
> >  
> > +config MFD_SKY81452
> > +	tristate "Skyworks Solutions SKY81452"
> > +	select MFD_CORE
> > +	select REGMAP_I2C
> > +	depends on I2C
> > +	help
> > +	  This is the core driver for the Skyworks SKY81452 backlight and
> > +	  voltage regulator device.
> > +
> > +	  This driver can also be built as a module.  If so, the module
> > +	  will be called sky81452.
> > +
> >  config MFD_SMSC
> >         bool "SMSC ECE1099 series chips"
> >         depends on I2C=y


Paul Bolle

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html