From: Devin Ryles <devin.ryles-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
Cc: Jean Delvare <jdelvare-l3A5Bk7waGM@public.gmane.org>,
Jonathan Corbet <corbet-T1hC0tSOHrs@public.gmane.org>,
james.d.ralston-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
devin.ryles-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
frank.riegel-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org
Subject: [PATCH 1/3] SMBUS: Add DeviceIDs for SunrisePoint LP
Date: Fri, 07 Nov 2014 17:55:43 -0500 [thread overview]
Message-ID: <1415400943.1954.9.camel@localhost.localdomain> (raw)
>From 8386c61977dce52fcdfe7fb279692606f47650bc Mon Sep 17 00:00:00 2001
From: Devin Ryles <devin.ryles-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Date: Wed, 5 Nov 2014 16:30:03 -0500
Subject: [PATCH 1/3] SMBUS: Add DeviceIDs for SunrisePoint LP
This patch adds the DeviceIDs for SunrisePoint LP
Signed-off-by: Devin Ryles <devin.ryles-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
Documentation/i2c/busses/i2c-i801 | 1 +
drivers/i2c/busses/Kconfig | 1 +
drivers/i2c/busses/i2c-i801.c | 3 +++
3 files changed, 5 insertions(+)
diff --git a/Documentation/i2c/busses/i2c-i801
b/Documentation/i2c/busses/i2c-i801
index 793c83d..82f48f7 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -29,6 +29,7 @@ Supported adapters:
* Intel Wildcat Point-LP (PCH)
* Intel BayTrail (SOC)
* Intel Sunrise Point-H (PCH)
+ * Intel Sunrise Point-LP (PCH)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus
controller
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 917c358..06e99eb 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -123,6 +123,7 @@ config I2C_I801
Wildcat Point-LP (PCH)
BayTrail (SOC)
Sunrise Point-H (PCH)
+ Sunrise Point-LP (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c
b/drivers/i2c/busses/i2c-i801.c
index 7cfc183..e158e18 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -63,6 +63,7 @@
* Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes
* BayTrail (SOC) 0x0f12 32 hard yes yes yes
* Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes
+ * Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes
*
* Features supported by this driver:
* Software PEC no
@@ -186,6 +187,7 @@
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22
#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23
struct i801_mux_config {
char *gpio_chip;
@@ -833,6 +835,7 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
{ 0, }
};
--
1.9.3
WARNING: multiple messages have this Message-ID (diff)
From: Devin Ryles <devin.ryles@intel.com>
To: Wolfram Sang <wsa@the-dreams.de>
Cc: Jean Delvare <jdelvare@suse.de>, Jonathan Corbet <corbet@lwn.net>,
james.d.ralston@intel.com, devin.ryles@intel.com,
linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
frank.riegel@intel.com
Subject: [PATCH 1/3] SMBUS: Add DeviceIDs for SunrisePoint LP
Date: Fri, 07 Nov 2014 17:55:43 -0500 [thread overview]
Message-ID: <1415400943.1954.9.camel@localhost.localdomain> (raw)
>From 8386c61977dce52fcdfe7fb279692606f47650bc Mon Sep 17 00:00:00 2001
From: Devin Ryles <devin.ryles@intel.com>
Date: Wed, 5 Nov 2014 16:30:03 -0500
Subject: [PATCH 1/3] SMBUS: Add DeviceIDs for SunrisePoint LP
This patch adds the DeviceIDs for SunrisePoint LP
Signed-off-by: Devin Ryles <devin.ryles@intel.com>
---
Documentation/i2c/busses/i2c-i801 | 1 +
drivers/i2c/busses/Kconfig | 1 +
drivers/i2c/busses/i2c-i801.c | 3 +++
3 files changed, 5 insertions(+)
diff --git a/Documentation/i2c/busses/i2c-i801
b/Documentation/i2c/busses/i2c-i801
index 793c83d..82f48f7 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -29,6 +29,7 @@ Supported adapters:
* Intel Wildcat Point-LP (PCH)
* Intel BayTrail (SOC)
* Intel Sunrise Point-H (PCH)
+ * Intel Sunrise Point-LP (PCH)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus
controller
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 917c358..06e99eb 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -123,6 +123,7 @@ config I2C_I801
Wildcat Point-LP (PCH)
BayTrail (SOC)
Sunrise Point-H (PCH)
+ Sunrise Point-LP (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c
b/drivers/i2c/busses/i2c-i801.c
index 7cfc183..e158e18 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -63,6 +63,7 @@
* Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes
* BayTrail (SOC) 0x0f12 32 hard yes yes yes
* Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes
+ * Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes
*
* Features supported by this driver:
* Software PEC no
@@ -186,6 +187,7 @@
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22
#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23
struct i801_mux_config {
char *gpio_chip;
@@ -833,6 +835,7 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
{ 0, }
};
--
1.9.3
next reply other threads:[~2014-11-07 22:55 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-07 22:55 Devin Ryles [this message]
2014-11-07 22:55 ` [PATCH 1/3] SMBUS: Add DeviceIDs for SunrisePoint LP Devin Ryles
[not found] ` <1415400943.1954.9.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2014-11-10 6:45 ` Jean Delvare
2014-11-10 6:45 ` Jean Delvare
[not found] ` <20141110074533.20cbd55f-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2014-11-10 17:13 ` [PATCH] " Devin Ryles
2014-11-10 17:13 ` Devin Ryles
2014-11-10 17:54 ` Jean Delvare
[not found] ` <1415639581.1954.21.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2014-11-12 16:16 ` Wolfram Sang
2014-11-12 16:16 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415400943.1954.9.camel@localhost.localdomain \
--to=devin.ryles-ral2jqcrhueavxtiumwx3w@public.gmane.org \
--cc=corbet-T1hC0tSOHrs@public.gmane.org \
--cc=frank.riegel-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=james.d.ralston-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=jdelvare-l3A5Bk7waGM@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.