From: Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
Cc: jroedel-l3A5Bk7waGM@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>,
thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org,
Varun.Sethi-KZfg59tc24xl57MIdRCFDg@public.gmane.org,
dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org
Subject: [RFC PATCH v4 8/8] arm: dma-mapping: plumb our iommu mapping ops into arch_setup_dma_ops
Date: Fri, 14 Nov 2014 18:56:37 +0000 [thread overview]
Message-ID: <1415991397-9618-9-git-send-email-will.deacon@arm.com> (raw)
In-Reply-To: <1415991397-9618-1-git-send-email-will.deacon-5wv7dgnIgG8@public.gmane.org>
This patch plumbs the existing ARM IOMMU DMA infrastructure (which isn't
actually called outside of a few drivers) into arch_setup_dma_ops, so
that we can use IOMMUs for DMA transfers in a more generic fashion.
Since this significantly complicates the arch_setup_dma_ops function,
it is moved out of line into dma-mapping.c. If CONFIG_ARM_DMA_USE_IOMMU
is not set, the iommu parameter is ignored and the normal ops are used
instead.
Signed-off-by: Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>
---
arch/arm/include/asm/dma-mapping.h | 12 +++---
arch/arm/mm/dma-mapping.c | 80 ++++++++++++++++++++++++++++++++++----
2 files changed, 78 insertions(+), 14 deletions(-)
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index f3c0d953f6a2..9410b7e548fc 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -121,14 +121,12 @@ static inline unsigned long dma_max_pfn(struct device *dev)
}
#define dma_max_pfn(dev) dma_max_pfn(dev)
-static inline void arch_setup_dma_ops(struct device *dev, u64 dma_base,
- u64 size, struct iommu_ops *iommu,
- bool coherent)
-{
- if (coherent)
- set_dma_ops(dev, &arm_coherent_dma_ops);
-}
#define arch_setup_dma_ops arch_setup_dma_ops
+extern void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
+ struct iommu_ops *iommu, bool coherent);
+
+#define arch_teardown_dma_ops arch_teardown_dma_ops
+extern void arch_teardown_dma_ops(struct device *dev);
static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
{
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index e8907117861e..f15eae5e0513 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -1947,9 +1947,8 @@ EXPORT_SYMBOL_GPL(arm_iommu_release_mapping);
* arm_iommu_create_mapping)
*
* Attaches specified io address space mapping to the provided device,
- * this replaces the dma operations (dma_map_ops pointer) with the
- * IOMMU aware version. More than one client might be attached to
- * the same io address space mapping.
+ * More than one client might be attached to the same io address space
+ * mapping.
*/
int arm_iommu_attach_device(struct device *dev,
struct dma_iommu_mapping *mapping)
@@ -1962,7 +1961,6 @@ int arm_iommu_attach_device(struct device *dev,
kref_get(&mapping->kref);
dev->archdata.mapping = mapping;
- set_dma_ops(dev, &iommu_ops);
pr_debug("Attached IOMMU controller to %s device.\n", dev_name(dev));
return 0;
@@ -1974,7 +1972,6 @@ EXPORT_SYMBOL_GPL(arm_iommu_attach_device);
* @dev: valid struct device pointer
*
* Detaches the provided device from a previously attached map.
- * This voids the dma operations (dma_map_ops pointer)
*/
void arm_iommu_detach_device(struct device *dev)
{
@@ -1989,10 +1986,79 @@ void arm_iommu_detach_device(struct device *dev)
iommu_detach_device(mapping->domain, dev);
kref_put(&mapping->kref, release_iommu_mapping);
dev->archdata.mapping = NULL;
- set_dma_ops(dev, NULL);
pr_debug("Detached IOMMU controller from %s device.\n", dev_name(dev));
}
EXPORT_SYMBOL_GPL(arm_iommu_detach_device);
-#endif
+static struct dma_map_ops *arm_get_iommu_dma_map_ops(bool coherent)
+{
+ return coherent ? &iommu_coherent_ops : &iommu_ops;
+}
+
+static bool arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size,
+ struct iommu_ops *iommu)
+{
+ struct dma_iommu_mapping *mapping;
+
+ mapping = arm_iommu_create_mapping(dev->bus, dma_base, size);
+ if (IS_ERR(mapping)) {
+ pr_warn("Failed to create %llu-byte IOMMU mapping for device %s\n",
+ size, dev_name(dev));
+ return false;
+ }
+
+ if (arm_iommu_attach_device(dev, mapping)) {
+ pr_warn("Failed to attached device %s to IOMMU_mapping\n",
+ dev_name(dev));
+ arm_iommu_release_mapping(mapping);
+ return false;
+ }
+
+ return true;
+}
+
+static void arm_teardown_iommu_dma_ops(struct device *dev)
+{
+ struct dma_iommu_mapping *mapping = dev->archdata.mapping;
+
+ arm_iommu_detach_device(dev);
+ arm_iommu_release_mapping(mapping);
+}
+
+#else
+
+static bool arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size,
+ struct iommu_ops *iommu)
+{
+ return false;
+}
+
+static void arm_teardown_iommu_dma_ops(struct device *dev) { }
+
+#define arm_get_iommu_dma_map_ops arm_get_dma_map_ops
+
+#endif /* CONFIG_ARM_DMA_USE_IOMMU */
+
+static struct dma_map_ops *arm_get_dma_map_ops(bool coherent)
+{
+ return coherent ? &arm_coherent_dma_ops : &arm_dma_ops;
+}
+
+void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
+ struct iommu_ops *iommu, bool coherent)
+{
+ struct dma_map_ops *dma_ops;
+
+ if (arm_setup_iommu_dma_ops(dev, dma_base, size, iommu))
+ dma_ops = arm_get_iommu_dma_map_ops(coherent);
+ else
+ dma_ops = arm_get_dma_map_ops(coherent);
+
+ set_dma_ops(dev, dma_ops);
+}
+
+void arch_teardown_dma_ops(struct device *dev)
+{
+ arm_teardown_iommu_dma_ops(dev);
+}
--
2.1.1
WARNING: multiple messages have this Message-ID (diff)
From: will.deacon@arm.com (Will Deacon)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH v4 8/8] arm: dma-mapping: plumb our iommu mapping ops into arch_setup_dma_ops
Date: Fri, 14 Nov 2014 18:56:37 +0000 [thread overview]
Message-ID: <1415991397-9618-9-git-send-email-will.deacon@arm.com> (raw)
In-Reply-To: <1415991397-9618-1-git-send-email-will.deacon@arm.com>
This patch plumbs the existing ARM IOMMU DMA infrastructure (which isn't
actually called outside of a few drivers) into arch_setup_dma_ops, so
that we can use IOMMUs for DMA transfers in a more generic fashion.
Since this significantly complicates the arch_setup_dma_ops function,
it is moved out of line into dma-mapping.c. If CONFIG_ARM_DMA_USE_IOMMU
is not set, the iommu parameter is ignored and the normal ops are used
instead.
Signed-off-by: Will Deacon <will.deacon@arm.com>
---
arch/arm/include/asm/dma-mapping.h | 12 +++---
arch/arm/mm/dma-mapping.c | 80 ++++++++++++++++++++++++++++++++++----
2 files changed, 78 insertions(+), 14 deletions(-)
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index f3c0d953f6a2..9410b7e548fc 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -121,14 +121,12 @@ static inline unsigned long dma_max_pfn(struct device *dev)
}
#define dma_max_pfn(dev) dma_max_pfn(dev)
-static inline void arch_setup_dma_ops(struct device *dev, u64 dma_base,
- u64 size, struct iommu_ops *iommu,
- bool coherent)
-{
- if (coherent)
- set_dma_ops(dev, &arm_coherent_dma_ops);
-}
#define arch_setup_dma_ops arch_setup_dma_ops
+extern void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
+ struct iommu_ops *iommu, bool coherent);
+
+#define arch_teardown_dma_ops arch_teardown_dma_ops
+extern void arch_teardown_dma_ops(struct device *dev);
static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
{
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index e8907117861e..f15eae5e0513 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -1947,9 +1947,8 @@ EXPORT_SYMBOL_GPL(arm_iommu_release_mapping);
* arm_iommu_create_mapping)
*
* Attaches specified io address space mapping to the provided device,
- * this replaces the dma operations (dma_map_ops pointer) with the
- * IOMMU aware version. More than one client might be attached to
- * the same io address space mapping.
+ * More than one client might be attached to the same io address space
+ * mapping.
*/
int arm_iommu_attach_device(struct device *dev,
struct dma_iommu_mapping *mapping)
@@ -1962,7 +1961,6 @@ int arm_iommu_attach_device(struct device *dev,
kref_get(&mapping->kref);
dev->archdata.mapping = mapping;
- set_dma_ops(dev, &iommu_ops);
pr_debug("Attached IOMMU controller to %s device.\n", dev_name(dev));
return 0;
@@ -1974,7 +1972,6 @@ EXPORT_SYMBOL_GPL(arm_iommu_attach_device);
* @dev: valid struct device pointer
*
* Detaches the provided device from a previously attached map.
- * This voids the dma operations (dma_map_ops pointer)
*/
void arm_iommu_detach_device(struct device *dev)
{
@@ -1989,10 +1986,79 @@ void arm_iommu_detach_device(struct device *dev)
iommu_detach_device(mapping->domain, dev);
kref_put(&mapping->kref, release_iommu_mapping);
dev->archdata.mapping = NULL;
- set_dma_ops(dev, NULL);
pr_debug("Detached IOMMU controller from %s device.\n", dev_name(dev));
}
EXPORT_SYMBOL_GPL(arm_iommu_detach_device);
-#endif
+static struct dma_map_ops *arm_get_iommu_dma_map_ops(bool coherent)
+{
+ return coherent ? &iommu_coherent_ops : &iommu_ops;
+}
+
+static bool arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size,
+ struct iommu_ops *iommu)
+{
+ struct dma_iommu_mapping *mapping;
+
+ mapping = arm_iommu_create_mapping(dev->bus, dma_base, size);
+ if (IS_ERR(mapping)) {
+ pr_warn("Failed to create %llu-byte IOMMU mapping for device %s\n",
+ size, dev_name(dev));
+ return false;
+ }
+
+ if (arm_iommu_attach_device(dev, mapping)) {
+ pr_warn("Failed to attached device %s to IOMMU_mapping\n",
+ dev_name(dev));
+ arm_iommu_release_mapping(mapping);
+ return false;
+ }
+
+ return true;
+}
+
+static void arm_teardown_iommu_dma_ops(struct device *dev)
+{
+ struct dma_iommu_mapping *mapping = dev->archdata.mapping;
+
+ arm_iommu_detach_device(dev);
+ arm_iommu_release_mapping(mapping);
+}
+
+#else
+
+static bool arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size,
+ struct iommu_ops *iommu)
+{
+ return false;
+}
+
+static void arm_teardown_iommu_dma_ops(struct device *dev) { }
+
+#define arm_get_iommu_dma_map_ops arm_get_dma_map_ops
+
+#endif /* CONFIG_ARM_DMA_USE_IOMMU */
+
+static struct dma_map_ops *arm_get_dma_map_ops(bool coherent)
+{
+ return coherent ? &arm_coherent_dma_ops : &arm_dma_ops;
+}
+
+void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
+ struct iommu_ops *iommu, bool coherent)
+{
+ struct dma_map_ops *dma_ops;
+
+ if (arm_setup_iommu_dma_ops(dev, dma_base, size, iommu))
+ dma_ops = arm_get_iommu_dma_map_ops(coherent);
+ else
+ dma_ops = arm_get_dma_map_ops(coherent);
+
+ set_dma_ops(dev, dma_ops);
+}
+
+void arch_teardown_dma_ops(struct device *dev)
+{
+ arm_teardown_iommu_dma_ops(dev);
+}
--
2.1.1
next prev parent reply other threads:[~2014-11-14 18:56 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-14 18:56 [RFC PATCH v4 0/8] Introduce automatic DMA configuration for IOMMU masters Will Deacon
2014-11-14 18:56 ` Will Deacon
[not found] ` <1415991397-9618-1-git-send-email-will.deacon-5wv7dgnIgG8@public.gmane.org>
2014-11-14 18:56 ` [RFC PATCH v4 1/8] iommu: provide early initialisation hook for IOMMU drivers Will Deacon
2014-11-14 18:56 ` Will Deacon
[not found] ` <1415991397-9618-2-git-send-email-will.deacon-5wv7dgnIgG8@public.gmane.org>
2014-11-18 12:28 ` Marek Szyprowski
2014-11-18 12:28 ` Marek Szyprowski
2014-11-14 18:56 ` [RFC PATCH v4 2/8] dma-mapping: replace set_arch_dma_coherent_ops with arch_setup_dma_ops Will Deacon
2014-11-14 18:56 ` Will Deacon
2014-11-14 18:56 ` [RFC PATCH v4 3/8] iommu: add new iommu_ops callback for adding an OF device Will Deacon
2014-11-14 18:56 ` Will Deacon
2014-11-14 18:56 ` [RFC PATCH v4 4/8] iommu: provide helper function to configure an IOMMU for an of master Will Deacon
2014-11-14 18:56 ` Will Deacon
2014-11-14 18:56 ` [RFC PATCH v4 5/8] dma-mapping: detect and configure IOMMU in of_dma_configure Will Deacon
2014-11-14 18:56 ` Will Deacon
2014-11-14 18:56 ` [RFC PATCH v4 6/8] dma-mapping: set dma segment properties " Will Deacon
2014-11-14 18:56 ` Will Deacon
2014-11-25 13:05 ` Robin Murphy
2014-11-25 13:05 ` Robin Murphy
[not found] ` <54747EA0.1020001-5wv7dgnIgG8@public.gmane.org>
2014-11-26 11:37 ` Will Deacon
2014-11-26 11:37 ` Will Deacon
2014-11-14 18:56 ` [RFC PATCH v4 7/8] arm: call iommu_init before of_platform_populate Will Deacon
2014-11-14 18:56 ` Will Deacon
2014-11-14 18:56 ` Will Deacon [this message]
2014-11-14 18:56 ` [RFC PATCH v4 8/8] arm: dma-mapping: plumb our iommu mapping ops into arch_setup_dma_ops Will Deacon
2014-11-17 11:29 ` Robin Murphy
2014-11-17 11:29 ` Robin Murphy
[not found] ` <5469DC13.6040700-5wv7dgnIgG8@public.gmane.org>
2014-11-17 11:41 ` Will Deacon
2014-11-17 11:41 ` Will Deacon
2014-11-14 19:11 ` [RFC PATCH v4 0/8] Introduce automatic DMA configuration for IOMMU masters Arnd Bergmann
2014-11-14 19:11 ` Arnd Bergmann
2014-11-14 19:27 ` Will Deacon
2014-11-14 19:27 ` Will Deacon
[not found] ` <20141114192754.GB9291-5wv7dgnIgG8@public.gmane.org>
2014-11-14 20:01 ` Arnd Bergmann
2014-11-14 20:01 ` Arnd Bergmann
2015-01-19 16:06 ` Will Deacon
2015-01-19 16:06 ` Will Deacon
[not found] ` <20150119160620.GB2373-5wv7dgnIgG8@public.gmane.org>
2015-01-20 16:56 ` Laurent Pinchart
2015-01-20 16:56 ` Laurent Pinchart
2015-01-21 14:48 ` Will Deacon
2015-01-21 14:48 ` Will Deacon
2015-01-21 15:02 ` Laurent Pinchart
2015-01-21 15:02 ` Laurent Pinchart
2014-11-19 11:21 ` Marek Szyprowski
2014-11-19 11:21 ` Marek Szyprowski
[not found] ` <546C7D36.7030400-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2014-11-19 11:41 ` Will Deacon
2014-11-19 11:41 ` Will Deacon
[not found] ` <20141119114150.GD15985-5wv7dgnIgG8@public.gmane.org>
2014-11-25 7:35 ` Marek Szyprowski
2014-11-25 7:35 ` Marek Szyprowski
[not found] ` <54743139.2020804-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2014-11-26 17:47 ` Will Deacon
2014-11-26 17:47 ` Will Deacon
[not found] ` <20141126174707.GO14866-5wv7dgnIgG8@public.gmane.org>
2014-11-28 13:03 ` jroedel-l3A5Bk7waGM
2014-11-28 13:03 ` jroedel at suse.de
[not found] ` <20141128130336.GF3156-l3A5Bk7waGM@public.gmane.org>
2014-11-28 13:19 ` Will Deacon
2014-11-28 13:19 ` Will Deacon
2014-12-15 17:21 ` Laurent Pinchart
2014-12-15 17:21 ` Laurent Pinchart
2014-12-15 17:34 ` Will Deacon
2014-12-15 17:34 ` Will Deacon
[not found] ` <20141215173416.GS20738-5wv7dgnIgG8@public.gmane.org>
2014-12-15 17:55 ` Laurent Pinchart
2014-12-15 17:55 ` Laurent Pinchart
2014-11-25 13:15 ` Robin Murphy
2014-11-25 13:15 ` Robin Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415991397-9618-9-git-send-email-will.deacon@arm.com \
--to=will.deacon-5wv7dgnigg8@public.gmane.org \
--cc=Varun.Sethi-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=jroedel-l3A5Bk7waGM@public.gmane.org \
--cc=laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.