From: Hannes Reinecke <hare@suse.de>
To: James Bottomley <jbottomley@parallels.com>
Cc: Christoph Hellwig <hch@lst.de>, Matthew Wilcox <matthew@wil.cx>,
Doug Gilbert <dgilbert@interlog.com>,
linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCH 06/12] advansys: Use dma_pool for sg elements
Date: Wed, 3 Dec 2014 12:44:59 +0100 [thread overview]
Message-ID: <1417607105-85455-7-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1417607105-85455-1-git-send-email-hare@suse.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 102 ++++++++++++++++++++----------------------------
1 file changed, 42 insertions(+), 60 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index c5395b5..0aea820 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -1820,10 +1820,10 @@ typedef struct asc_sg_block {
uchar reserved2;
uchar reserved3;
uchar sg_cnt; /* Valid entries in block. */
- ADV_PADDR sg_ptr; /* Pointer to next sg block. */
+ __le32 sg_ptr; /* Pointer to next sg block. */
struct {
- ADV_PADDR sg_addr; /* SG element address. */
- ADV_DCNT sg_count; /* SG element count. */
+ __le32 sg_addr; /* SG element address. */
+ __le32 sg_count; /* SG element count. */
} sg_list[NO_OF_SG_PER_BLOCK];
} ADV_SG_BLOCK;
@@ -1888,7 +1888,7 @@ typedef struct adv_scsi_req_q {
*/
typedef struct adv_sgblk {
ADV_SG_BLOCK sg_block; /* Sgblock structure. */
- uchar align[32]; /* Sgblock structure padding. */
+ dma_addr_t sg_addr; /* Physical address */
struct adv_sgblk *next_sgblkp; /* Next scatter-gather structure. */
} adv_sgblk_t;
@@ -2382,7 +2382,7 @@ struct asc_board {
adv_req_t *adv_reqp; /* Request structures. */
dma_addr_t adv_reqp_addr;
size_t adv_reqp_size;
- adv_sgblk_t *adv_sgblkp; /* Scatter-gather structures. */
+ struct dma_pool *adv_sgblk_pool; /* Scatter-gather structures. */
ushort bios_signature; /* BIOS Signature. */
ushort bios_version; /* BIOS Version. */
ushort bios_codeseg; /* BIOS Code Segment. */
@@ -2674,6 +2674,7 @@ static void asc_prt_adv_scsi_req_q(ADV_SCSI_REQ_Q *q)
{
int sg_blk_cnt;
struct asc_sg_block *sg_ptr;
+ adv_sgblk_t *sgblkp;
printk("ADV_SCSI_REQ_Q at addr 0x%lx\n", (ulong)q);
@@ -2700,21 +2701,15 @@ static void asc_prt_adv_scsi_req_q(ADV_SCSI_REQ_Q *q)
/* Display the request's ADV_SG_BLOCK structures. */
if (q->sg_list_ptr != NULL) {
+ sgblkp = container_of(q->sg_list_ptr, adv_sgblk_t, sg_block);
sg_blk_cnt = 0;
- while (1) {
- /*
- * 'sg_ptr' is a physical address. Convert it to a virtual
- * address by indexing 'sg_blk_cnt' into the virtual address
- * array 'sg_list_ptr'.
- *
- * XXX - Assumes all SG physical blocks are virtually contiguous.
- */
- sg_ptr =
- &(((ADV_SG_BLOCK *)(q->sg_list_ptr))[sg_blk_cnt]);
+ while (sgblkp) {
+ sg_ptr = &sgblkp->sg_block;
asc_prt_adv_sgblock(sg_blk_cnt, sg_ptr);
if (sg_ptr->sg_ptr == 0) {
break;
}
+ sgblkp = sgblkp->next_sgblkp;
sg_blk_cnt++;
}
}
@@ -6237,9 +6232,8 @@ static void adv_isr_callback(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp)
/* Remove 'sgblkp' from the request list. */
reqp->sgblkp = sgblkp->next_sgblkp;
- /* Add 'sgblkp' to the board free list. */
- sgblkp->next_sgblkp = boardp->adv_sgblkp;
- boardp->adv_sgblkp = sgblkp;
+ dma_pool_free(boardp->adv_sgblk_pool, sgblkp,
+ sgblkp->sg_addr);
}
ASC_DBG(1, "done\n");
@@ -7935,15 +7929,16 @@ static int
adv_get_sglist(struct asc_board *boardp, adv_req_t *reqp,
ADV_SCSI_REQ_Q *scsiqp, struct scsi_cmnd *scp, int use_sg)
{
- adv_sgblk_t *sgblkp;
+ adv_sgblk_t *sgblkp, *prev_sgblkp;
struct scatterlist *slp;
int sg_elem_cnt;
ADV_SG_BLOCK *sg_block, *prev_sg_block;
- ADV_PADDR sg_block_paddr;
+ dma_addr_t sgblk_paddr;
int i;
slp = scsi_sglist(scp);
sg_elem_cnt = use_sg;
+ prev_sgblkp = NULL;
prev_sg_block = NULL;
reqp->sgblkp = NULL;
@@ -7953,7 +7948,9 @@ adv_get_sglist(struct asc_board *boardp, adv_req_t *reqp,
* list. One 'adv_sgblk_t' structure holds NO_OF_SG_PER_BLOCK
* (15) scatter-gather elements.
*/
- if ((sgblkp = boardp->adv_sgblkp) == NULL) {
+ sgblkp = dma_pool_alloc(boardp->adv_sgblk_pool, GFP_KERNEL,
+ &sgblk_paddr);
+ if (!sgblkp) {
ASC_DBG(1, "no free adv_sgblk_t\n");
ASC_STATS(scp->device->host, adv_build_nosg);
@@ -7964,24 +7961,16 @@ adv_get_sglist(struct asc_board *boardp, adv_req_t *reqp,
while ((sgblkp = reqp->sgblkp) != NULL) {
/* Remove 'sgblkp' from the request list. */
reqp->sgblkp = sgblkp->next_sgblkp;
-
- /* Add 'sgblkp' to the board free list. */
- sgblkp->next_sgblkp = boardp->adv_sgblkp;
- boardp->adv_sgblkp = sgblkp;
+ sgblkp->next_sgblkp = NULL;
+ dma_pool_free(boardp->adv_sgblk_pool, sgblkp,
+ sgblkp->sg_addr);
}
return ASC_BUSY;
}
-
/* Complete 'adv_sgblk_t' board allocation. */
- boardp->adv_sgblkp = sgblkp->next_sgblkp;
+ sgblkp->sg_addr = sgblk_paddr;
sgblkp->next_sgblkp = NULL;
-
- /*
- * Get 8 byte aligned virtual and physical addresses
- * for the allocated ADV_SG_BLOCK structure.
- */
- sg_block = (ADV_SG_BLOCK *)ADV_8BALIGN(&sgblkp->sg_block);
- sg_block_paddr = virt_to_bus(sg_block);
+ sg_block = &sgblkp->sg_block;
/*
* Check if this is the first 'adv_sgblk_t' for the
@@ -7996,17 +7985,16 @@ adv_get_sglist(struct asc_board *boardp, adv_req_t *reqp,
* address pointers.
*/
scsiqp->sg_list_ptr = sg_block;
- scsiqp->sg_real_addr = cpu_to_le32(sg_block_paddr);
+ scsiqp->sg_real_addr = cpu_to_le32(sgblk_paddr);
} else {
/* Request's second or later scatter-gather block. */
- sgblkp->next_sgblkp = reqp->sgblkp;
- reqp->sgblkp = sgblkp;
+ prev_sgblkp->next_sgblkp = reqp->sgblkp;
/*
* Point the previous ADV_SG_BLOCK structure to
* the newly allocated ADV_SG_BLOCK structure.
*/
- prev_sg_block->sg_ptr = cpu_to_le32(sg_block_paddr);
+ prev_sg_block->sg_ptr = cpu_to_le32(sgblk_paddr);
}
for (i = 0; i < NO_OF_SG_PER_BLOCK; i++) {
@@ -8017,15 +8005,19 @@ adv_get_sglist(struct asc_board *boardp, adv_req_t *reqp,
ASC_STATS_ADD(scp->device->host, xfer_sect,
DIV_ROUND_UP(sg_dma_len(slp), 512));
- if (--sg_elem_cnt == 0) { /* Last ADV_SG_BLOCK and scatter-gather entry. */
+ if (--sg_elem_cnt == 0) {
+ /*
+ * Last ADV_SG_BLOCK and scatter-gather entry.
+ */
sg_block->sg_cnt = i + 1;
- sg_block->sg_ptr = 0L; /* Last ADV_SG_BLOCK in list. */
+ sg_block->sg_ptr = 0L; /* Last ADV_SG_BLOCK in list. */
return ADV_SUCCESS;
}
slp++;
}
sg_block->sg_cnt = NO_OF_SG_PER_BLOCK;
prev_sg_block = sg_block;
+ prev_sgblkp = sgblkp;
}
}
@@ -11193,8 +11185,7 @@ static int advansys_wide_init_chip(struct Scsi_Host *shost)
{
struct asc_board *board = shost_priv(shost);
struct adv_dvc_var *adv_dvc = &board->dvc_var.adv_dvc_var;
- int sg_cnt = 0;
- adv_sgblk_t *sgp;
+ size_t sgblk_pool_size;
int warn_code, err_code;
/*
@@ -11231,22 +11222,14 @@ static int advansys_wide_init_chip(struct Scsi_Host *shost)
* Allocate up to ADV_TOT_SG_BLOCK request structures for
* the Wide board. Each structure is about 136 bytes.
*/
- board->adv_sgblkp = NULL;
- for (sg_cnt = 0; sg_cnt < ADV_TOT_SG_BLOCK; sg_cnt++) {
- sgp = kmalloc(sizeof(adv_sgblk_t), GFP_KERNEL);
-
- if (!sgp)
- break;
-
- sgp->next_sgblkp = board->adv_sgblkp;
- board->adv_sgblkp = sgp;
-
- }
+ sgblk_pool_size = sizeof(adv_sgblk_t) * ADV_TOT_SG_BLOCK;
+ board->adv_sgblk_pool = dma_pool_create("adv_sgblk", board->dev,
+ sgblk_pool_size, 32, 0);
- ASC_DBG(1, "sg_cnt %d * %lu = %lu bytes\n", sg_cnt, sizeof(adv_sgblk_t),
- sizeof(adv_sgblk_t) * sg_cnt);
+ ASC_DBG(1, "sg_cnt %d * %lu = %lu bytes\n", ADV_TOT_SG_BLOCK,
+ sizeof(adv_sgblk_t), sgblk_pool_size);
- if (!board->adv_sgblkp)
+ if (!board->adv_sgblk_pool)
goto kmalloc_failed;
if (adv_dvc->chip_type == ADV_CHIP_ASC3550) {
@@ -11289,10 +11272,9 @@ static void advansys_wide_free_mem(struct asc_board *board)
board->adv_reqp, board->adv_reqp_addr);
board->adv_reqp = NULL;
}
- while (board->adv_sgblkp) {
- adv_sgblk_t *sgp = board->adv_sgblkp;
- board->adv_sgblkp = sgp->next_sgblkp;
- kfree(sgp);
+ if (board->adv_sgblk_pool) {
+ dma_pool_destroy(board->adv_sgblk_pool);
+ board->adv_sgblk_pool = NULL;
}
}
--
1.8.5.2
next prev parent reply other threads:[~2014-12-03 11:45 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-03 11:44 [PATCH 00/12] nobody loves the advansys driver Hannes Reinecke
2014-12-03 11:44 ` [PATCH 01/12] advansys: use host_reset Hannes Reinecke
2014-12-04 9:17 ` Christoph Hellwig
2014-12-04 9:23 ` Hannes Reinecke
2014-12-03 11:44 ` [PATCH 02/12] advansys: use shared host tag map for command lookup Hannes Reinecke
2014-12-04 9:20 ` Christoph Hellwig
2014-12-04 9:25 ` Hannes Reinecke
2014-12-04 9:26 ` Christoph Hellwig
2014-12-03 11:44 ` [PATCH 03/12] advansys: use DMA-API for mapping sense buffer Hannes Reinecke
2014-12-03 11:44 ` [PATCH 04/12] advansys: Use DMA-API for carrier buffer Hannes Reinecke
2014-12-03 11:44 ` [PATCH 05/12] advansys: Use DMA-API for mapping request blocks Hannes Reinecke
2014-12-03 11:44 ` Hannes Reinecke [this message]
2014-12-03 11:45 ` [PATCH 07/12] advansys: use 'bool' instead of 'int' Hannes Reinecke
2014-12-03 11:45 ` [PATCH 08/12] advansys: use standard data types Hannes Reinecke
2014-12-03 11:45 ` [PATCH 09/12] advansys: Remove 'TRUE' and 'FALSE' definitions Hannes Reinecke
2014-12-03 11:45 ` [PATCH 10/12] advansys: Remove 'ERR' definition Hannes Reinecke
2014-12-03 11:45 ` [PATCH 11/12] advansys: cleanup function return codes Hannes Reinecke
2014-12-03 11:45 ` [PATCH 12/12] advansys: Update to version 3.5 and remove compilation warning Hannes Reinecke
2014-12-04 9:23 ` Christoph Hellwig
2014-12-04 9:26 ` Hannes Reinecke
2014-12-03 15:21 ` [PATCH 00/12] nobody loves the advansys driver Christoph Hellwig
2014-12-03 15:34 ` Ondrej Zary
2014-12-03 15:42 ` James Bottomley
2014-12-03 16:28 ` Hannes Reinecke
2014-12-04 9:13 ` hch
2014-12-04 9:12 ` Christoph Hellwig
2014-12-03 16:06 ` Douglas Gilbert
2014-12-03 18:29 ` Ondrej Zary
2014-12-04 7:12 ` Hannes Reinecke
2014-12-07 14:44 ` Ondrej Zary
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417607105-85455-7-git-send-email-hare@suse.de \
--to=hare@suse.de \
--cc=dgilbert@interlog.com \
--cc=hch@lst.de \
--cc=jbottomley@parallels.com \
--cc=linux-scsi@vger.kernel.org \
--cc=matthew@wil.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.