All of lore.kernel.org
 help / color / mirror / Atom feed
From: Graham Moore <grmoore@opensource.altera.com>
To: <linux-mtd@lists.infradead.org>
Cc: Alan Tull <atull@opensource.altera.com>,
	Yves Vandervennet <yvanderv@opensource.altera.com>,
	linux-kernel@vger.kernel.org,
	Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>,
	Dinh Nguyen <dinguyen@opensource.altera.com>,
	Brian Norris <computersforpeace@gmail.com>,
	David Woodhouse <dwmw2@infradead.org>,
	Graham Moore <grmoore@opensource.altera.com>
Subject: [PATCH 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.
Date: Fri, 5 Dec 2014 13:35:32 -0600	[thread overview]
Message-ID: <1417808133-20719-2-git-send-email-grmoore@opensource.altera.com> (raw)
In-Reply-To: <1417808133-20719-1-git-send-email-grmoore@opensource.altera.com>

Signed-off-by: Graham Moore <grmoore@opensource.altera.com>
---
 .../devicetree/bindings/mtd/cadence_quadspi.txt    |   50 ++++++++++++++++++++
 1 file changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/cadence_quadspi.txt

diff --git a/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt
new file mode 100644
index 0000000..3a8ea1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt
@@ -0,0 +1,50 @@
+* Cadence Quad SPI controller
+
+Required properties:
+- compatible : Should be "cdns,qspi-nor".
+- reg : Contains two entries, each of which is a tuple consisting of a
+	physical address and length.  The first entry is the address and
+	length of the controller register set.  The second entry is the
+	address and length of the QSPI Controller data area.
+- interrupts : Unit interrupt specifier for the controller interrupt.
+- clocks : phandle to the Quad SPI clock.
+- ext-decoder : Value of 0 means no external chipselect decoder is
+	connected, 1 means there is an external chipselect decoder connected.
+- fifo-depth : Size of the data FIFO in words.
+- bus-num : Number of the SPI bus to which the controller is connected.
+
+Optional subnodes:
+Subnodes of the Cadence Quad SPI controller are spi slave nodes with additional
+custom properties:
+- cdns,page-size : Size, in bytes, of the device's write page
+- cdns,block-size : Size of the device's erase block
+- cdns,read-delay : Selay for read capture logic, in clock cycles
+- cdns,tshsl-ns : Delay in master reference clocks for the length that the master mode chip select outputs are de-asserted between transactions.
+- cdns,tsd2d-ns : Delay in master reference clocks between one chip select being de-activated and the activation of another.
+- cdns,tchsh-ns : Delay in master reference clocks between last bit of current transaction and deasserting the device chip select (qspi_n_ss_out).
+- cdns,tslch-ns : Delay in master reference clocks between setting qspi_n_ss_out low and first bit transfer.
+
+Example:
+
+	qspi: spi@ff705000 {
+		compatible = "cdns,qspi-nor";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0xff705000 0x1000>,
+			<0xffa00000 0x1000>;
+		interrupts = <0 151 4>;
+		clocks = <&qspi_clk>;
+		ext-decoder = <0>;
+		fifo-depth = <128>;
+
+		flash0: n25q00@0 {
+			...
+			cdns,page-size = <256>;
+			cdns,block-size = <16>;
+			cdns,read-delay = <4>;
+			cdns,tshsl-ns = <50>;
+			cdns,tsd2d-ns = <50>;
+			cdns,tchsh-ns = <4>;
+			cdns,tslch-ns = <4>;
+		}
+	}
-- 
1.7.9.5

WARNING: multiple messages have this Message-ID (diff)
From: Graham Moore <grmoore@opensource.altera.com>
To: <linux-mtd@lists.infradead.org>
Cc: David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	<linux-kernel@vger.kernel.org>,
	Alan Tull <atull@opensource.altera.com>,
	Dinh Nguyen <dinguyen@opensource.altera.com>,
	Yves Vandervennet <yvanderv@opensource.altera.com>,
	Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>,
	Graham Moore <grmoore@opensource.altera.com>
Subject: [PATCH 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.
Date: Fri, 5 Dec 2014 13:35:32 -0600	[thread overview]
Message-ID: <1417808133-20719-2-git-send-email-grmoore@opensource.altera.com> (raw)
In-Reply-To: <1417808133-20719-1-git-send-email-grmoore@opensource.altera.com>

Signed-off-by: Graham Moore <grmoore@opensource.altera.com>
---
 .../devicetree/bindings/mtd/cadence_quadspi.txt    |   50 ++++++++++++++++++++
 1 file changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/cadence_quadspi.txt

diff --git a/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt
new file mode 100644
index 0000000..3a8ea1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt
@@ -0,0 +1,50 @@
+* Cadence Quad SPI controller
+
+Required properties:
+- compatible : Should be "cdns,qspi-nor".
+- reg : Contains two entries, each of which is a tuple consisting of a
+	physical address and length.  The first entry is the address and
+	length of the controller register set.  The second entry is the
+	address and length of the QSPI Controller data area.
+- interrupts : Unit interrupt specifier for the controller interrupt.
+- clocks : phandle to the Quad SPI clock.
+- ext-decoder : Value of 0 means no external chipselect decoder is
+	connected, 1 means there is an external chipselect decoder connected.
+- fifo-depth : Size of the data FIFO in words.
+- bus-num : Number of the SPI bus to which the controller is connected.
+
+Optional subnodes:
+Subnodes of the Cadence Quad SPI controller are spi slave nodes with additional
+custom properties:
+- cdns,page-size : Size, in bytes, of the device's write page
+- cdns,block-size : Size of the device's erase block
+- cdns,read-delay : Selay for read capture logic, in clock cycles
+- cdns,tshsl-ns : Delay in master reference clocks for the length that the master mode chip select outputs are de-asserted between transactions.
+- cdns,tsd2d-ns : Delay in master reference clocks between one chip select being de-activated and the activation of another.
+- cdns,tchsh-ns : Delay in master reference clocks between last bit of current transaction and deasserting the device chip select (qspi_n_ss_out).
+- cdns,tslch-ns : Delay in master reference clocks between setting qspi_n_ss_out low and first bit transfer.
+
+Example:
+
+	qspi: spi@ff705000 {
+		compatible = "cdns,qspi-nor";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0xff705000 0x1000>,
+			<0xffa00000 0x1000>;
+		interrupts = <0 151 4>;
+		clocks = <&qspi_clk>;
+		ext-decoder = <0>;
+		fifo-depth = <128>;
+
+		flash0: n25q00@0 {
+			...
+			cdns,page-size = <256>;
+			cdns,block-size = <16>;
+			cdns,read-delay = <4>;
+			cdns,tshsl-ns = <50>;
+			cdns,tsd2d-ns = <50>;
+			cdns,tchsh-ns = <4>;
+			cdns,tslch-ns = <4>;
+		}
+	}
-- 
1.7.9.5


  reply	other threads:[~2014-12-05 19:38 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-05 19:35 [PATCH 0/2] mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller Graham Moore
2014-12-05 19:35 ` Graham Moore
2014-12-05 19:35 ` Graham Moore [this message]
2014-12-05 19:35   ` [PATCH 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver Graham Moore
2014-12-05 19:35 ` [PATCH 2/2] mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller Graham Moore
2014-12-05 19:35   ` Graham Moore
2014-12-05 22:30   ` Rafał Miłecki
2014-12-05 22:30     ` Rafał Miłecki
2014-12-08 16:54     ` Graham Moore
2014-12-08 16:54       ` Graham Moore

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1417808133-20719-2-git-send-email-grmoore@opensource.altera.com \
    --to=grmoore@opensource.altera.com \
    --cc=atull@opensource.altera.com \
    --cc=computersforpeace@gmail.com \
    --cc=dinguyen@opensource.altera.com \
    --cc=dwmw2@infradead.org \
    --cc=ezequiel@vanguardiasur.com.ar \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=yvanderv@opensource.altera.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.