Re: [bisected] tg3 broken in 3.18.0?

[Prashant Sreedharan <prashant@broadcom.com>]

On Thu, 2014-12-18 at 12:15 -0700, Bjorn Helgaas wrote:
> On Tue, Dec 16, 2014 at 12:54 PM, Michael Chan <mchan@broadcom.com> wrote:
> > On Tue, 2014-12-16 at 15:59 -0200, Marcelo Ricardo Leitner wrote:
> >> It's a
> >> 02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5722
> >> Gigabit Ethernet PCI Express
> >> over here
> >>
> >> I put a WARN_ON(1) after those printks, and this is what I got:
> >>
> >> [    1.550640] pci 0000:02:00.0: 1st 1 1
> >> [    1.550643] pci 0000:02:00.0: crs_timeout: 0
> >> [    1.550645] ------------[ cut here ]------------
> >> [    1.550651] WARNING: CPU: 6 PID: 364 at drivers/pci/probe.c:1445 pci_bus_read_dev_vendor_id+0x1d4/0x1e0()
> >> [    1.550652] Modules linked in: i915(+) raid0 i2c_algo_bit drm_kms_helper drm e1000e(+) tg3(+) ptp pps_core video
> >> [    1.550660] CPU: 6 PID: 364 Comm: systemd-udevd Not tainted 3.18.0-rc6+ #8
> >> [    1.550661] Hardware name: Dell Inc. OptiPlex 9010/03K80F, BIOS A15 08/12/2013
> >> [    1.550662]  0000000000000000 000000004de2d8dc ffff8807eabdf948 ffffffff8173db46
> >> [    1.550665]  0000000000000000 0000000000000000 ffff8807eabdf988 ffffffff81094d41
> >> [    1.550667]  ffff8807eabdf968 ffff8807f1e27000 0000000000000000 0000000000000000
> >> [    1.550669] Call Trace:
> >> [    1.550675]  [<ffffffff8173db46>] dump_stack+0x46/0x58
> >> [    1.550679]  [<ffffffff81094d41>] warn_slowpath_common+0x81/0xa0
> >> [    1.550681]  [<ffffffff81094e5a>] warn_slowpath_null+0x1a/0x20
> >> [    1.550683]  [<ffffffff813b2864>] pci_bus_read_dev_vendor_id+0x1d4/0x1e0
> >> [    1.550687]  [<ffffffff813b7c3e>] pci_device_is_present+0x2e/0x50
> >> [    1.550693]  [<ffffffffa003364f>] tg3_chip_reset+0x2f/0x940 [tg3]
> >> [    1.550697]  [<ffffffffa0033f9f>] tg3_halt+0x3f/0x1e0 [tg3]
> >> [    1.550701]  [<ffffffffa0044f83>] tg3_init_one+0xb83/0x1a40 [tg3]
> >
> > So does it work if you use a non-zero crs_timeout?  The driver has
> > called tg3_halt() which may affect configuration read responses.  I need
> > to check with the hardware team to see if the 5722 will return CRS in
> > this scenario.
> 
> Any updates from the hardware team?
> 
> This is a pretty serious regression, but as far as I can tell, it is
> not a PCI bug.  The device should respond to a config read of vendor
> ID.  If the driver does something that make the read return CRS
> status, I think the driver is responsible for doing whatever delay or
> other fixup is required.
> 
> I'm inclined to reassign this bug to the tg3 driver unless you think
> the PCI core is doing something wrong here.
> 
> Bjorn

We were not able to reproduce this issue, could you please check what is
the value of reg 0x70, before the pci_device_is_present call is made ?
if bit 15 is set config access will be retried.

--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -9025,6 +9025,7 @@ static int tg3_chip_reset(struct tg3 *tp)
        void (*write_op)(struct tg3 *, u32, u32);
        int i, err;
 
+       printk(KERN_ERR "config state: %x\n", tr32(TG3PCI_PCISTATE));
        if (!pci_device_is_present(tp->pdev))
                return -ENODEV;