All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sujith Manoharan <sujith@msujith.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH] ath10k: Fix DMA burst size
Date: Mon, 29 Dec 2014 11:51:06 +0530	[thread overview]
Message-ID: <1419834066-11802-1-git-send-email-sujith@msujith.org> (raw)

From: Sujith Manoharan <c_manoha@qca.qualcomm.com>

A value of zero indicates that 128B is the maximum
DMA request size for read/writes. But PCI cards based
on AR9880 can support 256B, so enable this for
the 10.2 firmware.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/hw.h  | 3 +++
 drivers/net/wireless/ath/ath10k/wmi.c | 2 +-
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 5729901..7b771ae 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -183,6 +183,9 @@ struct ath10k_pktlog_hdr {
 #define TARGET_10X_NUM_MSDU_DESC		(1024 + 400)
 #define TARGET_10X_MAX_FRAG_ENTRIES		0
 
+/* 10.2 parameters */
+#define TARGET_10_2_DMA_BURST_SIZE		1
+
 /* Target specific defines for WMI-TLV firmware */
 #define TARGET_TLV_NUM_VDEVS			3
 #define TARGET_TLV_NUM_STATIONS			32
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index ac74290..b103122 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -3744,7 +3744,7 @@ static struct sk_buff *ath10k_wmi_10_2_op_gen_init(struct ath10k *ar)
 	config.mcast2ucast_mode = __cpu_to_le32(TARGET_10X_MCAST2UCAST_MODE);
 	config.tx_dbg_log_size = __cpu_to_le32(TARGET_10X_TX_DBG_LOG_SIZE);
 	config.num_wds_entries = __cpu_to_le32(TARGET_10X_NUM_WDS_ENTRIES);
-	config.dma_burst_size = __cpu_to_le32(TARGET_10X_DMA_BURST_SIZE);
+	config.dma_burst_size = __cpu_to_le32(TARGET_10_2_DMA_BURST_SIZE);
 	config.mac_aggr_delim = __cpu_to_le32(TARGET_10X_MAC_AGGR_DELIM);
 
 	val = TARGET_10X_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK;
-- 
2.2.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

WARNING: multiple messages have this Message-ID (diff)
From: Sujith Manoharan <sujith@msujith.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH] ath10k: Fix DMA burst size
Date: Mon, 29 Dec 2014 11:51:06 +0530	[thread overview]
Message-ID: <1419834066-11802-1-git-send-email-sujith@msujith.org> (raw)

From: Sujith Manoharan <c_manoha@qca.qualcomm.com>

A value of zero indicates that 128B is the maximum
DMA request size for read/writes. But PCI cards based
on AR9880 can support 256B, so enable this for
the 10.2 firmware.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/hw.h  | 3 +++
 drivers/net/wireless/ath/ath10k/wmi.c | 2 +-
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 5729901..7b771ae 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -183,6 +183,9 @@ struct ath10k_pktlog_hdr {
 #define TARGET_10X_NUM_MSDU_DESC		(1024 + 400)
 #define TARGET_10X_MAX_FRAG_ENTRIES		0
 
+/* 10.2 parameters */
+#define TARGET_10_2_DMA_BURST_SIZE		1
+
 /* Target specific defines for WMI-TLV firmware */
 #define TARGET_TLV_NUM_VDEVS			3
 #define TARGET_TLV_NUM_STATIONS			32
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index ac74290..b103122 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -3744,7 +3744,7 @@ static struct sk_buff *ath10k_wmi_10_2_op_gen_init(struct ath10k *ar)
 	config.mcast2ucast_mode = __cpu_to_le32(TARGET_10X_MCAST2UCAST_MODE);
 	config.tx_dbg_log_size = __cpu_to_le32(TARGET_10X_TX_DBG_LOG_SIZE);
 	config.num_wds_entries = __cpu_to_le32(TARGET_10X_NUM_WDS_ENTRIES);
-	config.dma_burst_size = __cpu_to_le32(TARGET_10X_DMA_BURST_SIZE);
+	config.dma_burst_size = __cpu_to_le32(TARGET_10_2_DMA_BURST_SIZE);
 	config.mac_aggr_delim = __cpu_to_le32(TARGET_10X_MAC_AGGR_DELIM);
 
 	val = TARGET_10X_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK;
-- 
2.2.1


             reply	other threads:[~2014-12-29  6:19 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-29  6:21 Sujith Manoharan [this message]
2014-12-29  6:21 ` [PATCH] ath10k: Fix DMA burst size Sujith Manoharan
2015-01-02  7:41 ` Kalle Valo
2015-01-02  7:41   ` Kalle Valo
2015-01-07 10:04 ` Michal Kazior
2015-01-07 10:04   ` Michal Kazior
2015-01-07 10:26   ` Sujith Manoharan
2015-01-07 10:26     ` Sujith Manoharan
2015-01-12 11:51     ` Kalle Valo
2015-01-12 11:51       ` Kalle Valo
2015-01-12 11:53 ` Kalle Valo
2015-01-12 11:53   ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1419834066-11802-1-git-send-email-sujith@msujith.org \
    --to=sujith@msujith.org \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.