From: Stephen Boyd <sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>,
Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 4/8] clk: qcom: Add simple regmap based muxes
Date: Mon, 19 Jan 2015 18:05:31 -0800 [thread overview]
Message-ID: <1421719535-28398-5-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1421719535-28398-1-git-send-email-sboyd@codeaurora.org>
Add support for muxes that use regmap instead of readl/writel
directly. We don't support as many features as clk-mux.c, but
this is good enough to support getting and setting parents.
Adding a table based lookup can be added in the future if needed.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/clk-regmap-mux.c | 59 +++++++++++++++++++++++++++++++++++++++
drivers/clk/qcom/clk-regmap-mux.h | 29 +++++++++++++++++++
3 files changed, 89 insertions(+)
create mode 100644 drivers/clk/qcom/clk-regmap-mux.c
create mode 100644 drivers/clk/qcom/clk-regmap-mux.h
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index ed8976e87c0b..f5e5607f3965 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -7,6 +7,7 @@ clk-qcom-y += clk-rcg.o
clk-qcom-y += clk-rcg2.o
clk-qcom-y += clk-branch.o
clk-qcom-y += clk-regmap-divider.o
+clk-qcom-y += clk-regmap-mux.o
clk-qcom-y += reset.o
obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
diff --git a/drivers/clk/qcom/clk-regmap-mux.c b/drivers/clk/qcom/clk-regmap-mux.c
new file mode 100644
index 000000000000..cae3071f384c
--- /dev/null
+++ b/drivers/clk/qcom/clk-regmap-mux.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/regmap.h>
+#include <linux/export.h>
+
+#include "clk-regmap-mux.h"
+
+static inline struct clk_regmap_mux *to_clk_regmap_mux(struct clk_hw *hw)
+{
+ return container_of(to_clk_regmap(hw), struct clk_regmap_mux, clkr);
+}
+
+static u8 mux_get_parent(struct clk_hw *hw)
+{
+ struct clk_regmap_mux *mux = to_clk_regmap_mux(hw);
+ struct clk_regmap *clkr = to_clk_regmap(hw);
+ unsigned int mask = GENMASK(mux->width - 1, 0);
+ unsigned int val;
+
+ regmap_read(clkr->regmap, mux->reg, &val);
+
+ val >>= mux->shift;
+ val &= mask;
+
+ return val;
+}
+
+static int mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_regmap_mux *mux = to_clk_regmap_mux(hw);
+ struct clk_regmap *clkr = to_clk_regmap(hw);
+ unsigned int mask = GENMASK(mux->width + mux->shift - 1, mux->shift);
+ unsigned int val;
+
+ val = index;
+ val <<= mux->shift;
+
+ return regmap_update_bits(clkr->regmap, mux->reg, mask, val);
+}
+
+const struct clk_ops clk_regmap_mux_closest_ops = {
+ .get_parent = mux_get_parent,
+ .set_parent = mux_set_parent,
+ .determine_rate = __clk_mux_determine_rate_closest,
+};
+EXPORT_SYMBOL_GPL(clk_regmap_mux_closest_ops);
diff --git a/drivers/clk/qcom/clk-regmap-mux.h b/drivers/clk/qcom/clk-regmap-mux.h
new file mode 100644
index 000000000000..5cec76154fda
--- /dev/null
+++ b/drivers/clk/qcom/clk-regmap-mux.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __QCOM_CLK_REGMAP_MUX_H__
+#define __QCOM_CLK_REGMAP_MUX_H__
+
+#include <linux/clk-provider.h>
+#include "clk-regmap.h"
+
+struct clk_regmap_mux {
+ u32 reg;
+ u32 shift;
+ u32 width;
+ struct clk_regmap clkr;
+};
+
+extern const struct clk_ops clk_regmap_mux_closest_ops;
+
+#endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 4/8] clk: qcom: Add simple regmap based muxes
Date: Mon, 19 Jan 2015 18:05:31 -0800 [thread overview]
Message-ID: <1421719535-28398-5-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1421719535-28398-1-git-send-email-sboyd@codeaurora.org>
Add support for muxes that use regmap instead of readl/writel
directly. We don't support as many features as clk-mux.c, but
this is good enough to support getting and setting parents.
Adding a table based lookup can be added in the future if needed.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/clk-regmap-mux.c | 59 +++++++++++++++++++++++++++++++++++++++
drivers/clk/qcom/clk-regmap-mux.h | 29 +++++++++++++++++++
3 files changed, 89 insertions(+)
create mode 100644 drivers/clk/qcom/clk-regmap-mux.c
create mode 100644 drivers/clk/qcom/clk-regmap-mux.h
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index ed8976e87c0b..f5e5607f3965 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -7,6 +7,7 @@ clk-qcom-y += clk-rcg.o
clk-qcom-y += clk-rcg2.o
clk-qcom-y += clk-branch.o
clk-qcom-y += clk-regmap-divider.o
+clk-qcom-y += clk-regmap-mux.o
clk-qcom-y += reset.o
obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
diff --git a/drivers/clk/qcom/clk-regmap-mux.c b/drivers/clk/qcom/clk-regmap-mux.c
new file mode 100644
index 000000000000..cae3071f384c
--- /dev/null
+++ b/drivers/clk/qcom/clk-regmap-mux.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/regmap.h>
+#include <linux/export.h>
+
+#include "clk-regmap-mux.h"
+
+static inline struct clk_regmap_mux *to_clk_regmap_mux(struct clk_hw *hw)
+{
+ return container_of(to_clk_regmap(hw), struct clk_regmap_mux, clkr);
+}
+
+static u8 mux_get_parent(struct clk_hw *hw)
+{
+ struct clk_regmap_mux *mux = to_clk_regmap_mux(hw);
+ struct clk_regmap *clkr = to_clk_regmap(hw);
+ unsigned int mask = GENMASK(mux->width - 1, 0);
+ unsigned int val;
+
+ regmap_read(clkr->regmap, mux->reg, &val);
+
+ val >>= mux->shift;
+ val &= mask;
+
+ return val;
+}
+
+static int mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_regmap_mux *mux = to_clk_regmap_mux(hw);
+ struct clk_regmap *clkr = to_clk_regmap(hw);
+ unsigned int mask = GENMASK(mux->width + mux->shift - 1, mux->shift);
+ unsigned int val;
+
+ val = index;
+ val <<= mux->shift;
+
+ return regmap_update_bits(clkr->regmap, mux->reg, mask, val);
+}
+
+const struct clk_ops clk_regmap_mux_closest_ops = {
+ .get_parent = mux_get_parent,
+ .set_parent = mux_set_parent,
+ .determine_rate = __clk_mux_determine_rate_closest,
+};
+EXPORT_SYMBOL_GPL(clk_regmap_mux_closest_ops);
diff --git a/drivers/clk/qcom/clk-regmap-mux.h b/drivers/clk/qcom/clk-regmap-mux.h
new file mode 100644
index 000000000000..5cec76154fda
--- /dev/null
+++ b/drivers/clk/qcom/clk-regmap-mux.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __QCOM_CLK_REGMAP_MUX_H__
+#define __QCOM_CLK_REGMAP_MUX_H__
+
+#include <linux/clk-provider.h>
+#include "clk-regmap.h"
+
+struct clk_regmap_mux {
+ u32 reg;
+ u32 shift;
+ u32 width;
+ struct clk_regmap clkr;
+};
+
+extern const struct clk_ops clk_regmap_mux_closest_ops;
+
+#endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2015-01-20 2:05 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-20 2:05 [PATCH v3 0/8] qcom audio clock control drivers Stephen Boyd
2015-01-20 2:05 ` Stephen Boyd
2015-01-20 2:05 ` [PATCH v3 1/8] clk: Add __clk_mux_determine_rate_closest Stephen Boyd
2015-01-20 2:05 ` Stephen Boyd
2015-01-20 2:05 ` [PATCH v3 2/8] clk: divider: Make generic for usage elsewhere Stephen Boyd
2015-01-20 2:05 ` Stephen Boyd
2015-01-20 2:05 ` [PATCH v3 3/8] clk: qcom: Add support for regmap divider clocks Stephen Boyd
2015-01-20 2:05 ` Stephen Boyd
2015-01-20 2:05 ` Stephen Boyd [this message]
2015-01-20 2:05 ` [PATCH v3 4/8] clk: qcom: Add simple regmap based muxes Stephen Boyd
2015-01-20 2:05 ` [PATCH v3 5/8] dt-bindings: Add #defines for IPQ806x lpass clock control Stephen Boyd
2015-01-20 2:05 ` Stephen Boyd
2015-01-20 2:05 ` [PATCH v3 6/8] clk: qcom: Add IPQ806X LPASS clock controller (LCC) driver Stephen Boyd
2015-01-20 2:05 ` Stephen Boyd
2015-01-27 19:51 ` Mike Turquette
2015-01-27 19:51 ` Mike Turquette
2015-01-27 19:51 ` Mike Turquette
2015-01-20 2:05 ` [PATCH v3 7/8] clk: qcom: Add MSM8960/APQ8064 " Stephen Boyd
2015-01-20 2:05 ` Stephen Boyd
2015-01-27 19:51 ` Mike Turquette
2015-01-27 19:51 ` Mike Turquette
2015-01-27 19:51 ` Mike Turquette
2017-03-21 16:36 ` Linus Walleij
2017-03-21 16:36 ` Linus Walleij
2017-03-21 16:36 ` Linus Walleij
2017-03-24 8:11 ` Linus Walleij
2017-03-24 8:11 ` Linus Walleij
2017-03-24 8:11 ` Linus Walleij
[not found] ` <1421719535-28398-1-git-send-email-sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2015-01-20 2:05 ` [PATCH v3 8/8] devicetree: bindings: Document qcom,lcc Stephen Boyd
2015-01-20 2:05 ` Stephen Boyd
2015-01-20 2:05 ` Stephen Boyd
2015-01-22 21:41 ` [PATCH v3 0/8] qcom audio clock control drivers Ken Westfield
2015-01-22 21:41 ` Ken Westfield
2015-01-27 19:52 ` Mike Turquette
2015-01-27 19:52 ` Mike Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421719535-28398-5-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.