All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paul Bolle <pebolle@tiscali.nl>
To: Lee Jones <lee.jones@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, rtc-linux@googlegroups.com,
	wim@iguana.be, linux-watchdog@vger.kernel.org,
	devicetree@vger.kernel.org, linux@roeck-us.net,
	david.paris@st.com, a.zummo@towertech.it, kernel@stlinux.com
Subject: Re: [PATCH v4 6/9] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
Date: Sat, 28 Feb 2015 16:36:29 +0100	[thread overview]
Message-ID: <1425137789.24292.44.camel@x220> (raw)
In-Reply-To: <1424872349-4155-7-git-send-email-lee.jones@linaro.org>

On Wed, 2015-02-25 at 13:52 +0000, Lee Jones wrote:
> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> Signed-off-by: David Paris <david.paris@st.com>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
>  drivers/watchdog/Kconfig      |  13 ++
>  drivers/watchdog/Makefile     |   1 +
>  drivers/watchdog/st_lpc_wdt.c | 333 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 347 insertions(+)
>  create mode 100644 drivers/watchdog/st_lpc_wdt.c

A few nits follow.

> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 16f2023..023df6d 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -471,6 +471,19 @@ config SIRFSOC_WATCHDOG
>  	  Support for CSR SiRFprimaII and SiRFatlasVI watchdog. When
>  	  the watchdog triggers the system will be reset.
>  
> +config ST_LPC_WATCHDOG
> +	tristate "STMicroelectronics LPC Watchdog"
> +	depends on ARCH_STI
> +	depends on OF
> +	select WATCHDOG_CORE
> +	select MFD_ST_LPC
> +	help
> +	  Say Y here to include STMicroelectronics Low Power Controller
> +	  (LPC) based Watchdog timer support.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called st_wdt.
> +

This calls the module st_wdt. So does the title.

>  config TEGRA_WATCHDOG
>  	tristate "Tegra watchdog"
>  	depends on (ARCH_TEGRA || COMPILE_TEST) && HAS_IOMEM
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 5c19294..d98768c 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -59,6 +59,7 @@ obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
>  obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
>  obj-$(CONFIG_MOXART_WDT) += moxart_wdt.o
>  obj-$(CONFIG_SIRFSOC_WATCHDOG) += sirfsoc_wdt.o
> +obj-$(CONFIG_ST_LPC_WATCHDOG) += st_lpc_wdt.o

But this makes it st_lpc_wdt, doesn't it?

>  obj-$(CONFIG_QCOM_WDT) += qcom-wdt.o
>  obj-$(CONFIG_BCM_KONA_WDT) += bcm_kona_wdt.o
>  obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o
> diff --git a/drivers/watchdog/st_lpc_wdt.c b/drivers/watchdog/st_lpc_wdt.c
> new file mode 100644
> index 0000000..91bb631
> --- /dev/null
> +++ b/drivers/watchdog/st_lpc_wdt.c
> @@ -0,0 +1,333 @@
> +/*
> + * st-wdt.c - ST's LPC Watchdog

Mismatch between "st-wdt.c" and the actual filename. Perhaps just remove
"st-wdt.c - "?

> + *
> + * Copyright (C) 2014 STMicroelectronics -- All Rights Reserved
> + *
> + * Author: David Paris <david.paris@st.com> for STMicroelectronics
> + *         Lee Jones <lee.jones@linaro.org> for STMicroelectronics
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public Licence
> + * as published by the Free Software Foundation; either version
> + * 2 of the Licence, or (at your option) any later version.
> + */

This states the license is "GPL v2 or later"

[...]

> +MODULE_LICENSE("GPL v2");

So this should probably be
    MODULE_LICENSE("GPL");


Paul Bolle


WARNING: multiple messages have this Message-ID (diff)
From: pebolle@tiscali.nl (Paul Bolle)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 6/9] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
Date: Sat, 28 Feb 2015 16:36:29 +0100	[thread overview]
Message-ID: <1425137789.24292.44.camel@x220> (raw)
In-Reply-To: <1424872349-4155-7-git-send-email-lee.jones@linaro.org>

On Wed, 2015-02-25 at 13:52 +0000, Lee Jones wrote:
> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> Signed-off-by: David Paris <david.paris@st.com>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
>  drivers/watchdog/Kconfig      |  13 ++
>  drivers/watchdog/Makefile     |   1 +
>  drivers/watchdog/st_lpc_wdt.c | 333 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 347 insertions(+)
>  create mode 100644 drivers/watchdog/st_lpc_wdt.c

A few nits follow.

> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 16f2023..023df6d 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -471,6 +471,19 @@ config SIRFSOC_WATCHDOG
>  	  Support for CSR SiRFprimaII and SiRFatlasVI watchdog. When
>  	  the watchdog triggers the system will be reset.
>  
> +config ST_LPC_WATCHDOG
> +	tristate "STMicroelectronics LPC Watchdog"
> +	depends on ARCH_STI
> +	depends on OF
> +	select WATCHDOG_CORE
> +	select MFD_ST_LPC
> +	help
> +	  Say Y here to include STMicroelectronics Low Power Controller
> +	  (LPC) based Watchdog timer support.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called st_wdt.
> +

This calls the module st_wdt. So does the title.

>  config TEGRA_WATCHDOG
>  	tristate "Tegra watchdog"
>  	depends on (ARCH_TEGRA || COMPILE_TEST) && HAS_IOMEM
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 5c19294..d98768c 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -59,6 +59,7 @@ obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
>  obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
>  obj-$(CONFIG_MOXART_WDT) += moxart_wdt.o
>  obj-$(CONFIG_SIRFSOC_WATCHDOG) += sirfsoc_wdt.o
> +obj-$(CONFIG_ST_LPC_WATCHDOG) += st_lpc_wdt.o

But this makes it st_lpc_wdt, doesn't it?

>  obj-$(CONFIG_QCOM_WDT) += qcom-wdt.o
>  obj-$(CONFIG_BCM_KONA_WDT) += bcm_kona_wdt.o
>  obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o
> diff --git a/drivers/watchdog/st_lpc_wdt.c b/drivers/watchdog/st_lpc_wdt.c
> new file mode 100644
> index 0000000..91bb631
> --- /dev/null
> +++ b/drivers/watchdog/st_lpc_wdt.c
> @@ -0,0 +1,333 @@
> +/*
> + * st-wdt.c - ST's LPC Watchdog

Mismatch between "st-wdt.c" and the actual filename. Perhaps just remove
"st-wdt.c - "?

> + *
> + * Copyright (C) 2014 STMicroelectronics -- All Rights Reserved
> + *
> + * Author: David Paris <david.paris@st.com> for STMicroelectronics
> + *         Lee Jones <lee.jones@linaro.org> for STMicroelectronics
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public Licence
> + * as published by the Free Software Foundation; either version
> + * 2 of the Licence, or (at your option) any later version.
> + */

This states the license is "GPL v2 or later"

[...]

> +MODULE_LICENSE("GPL v2");

So this should probably be
    MODULE_LICENSE("GPL");


Paul Bolle

  reply	other threads:[~2015-02-28 15:36 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-25 13:52 [PATCH v4 0/9] mfd: watchdog: rtc: New driver for ST's LPC IP Lee Jones
2015-02-25 13:52 ` Lee Jones
2015-02-25 13:52 ` Lee Jones
2015-02-25 13:52 ` [PATCH v4 1/9] mfd: dt-bindings: Provide human readable defines for LPC mode choosing Lee Jones
2015-02-25 13:52   ` Lee Jones
2015-02-25 13:52 ` [PATCH v4 2/9] ARM: multi_v7_defconfig: Enable support for ST's LPC Watchdog Lee Jones
2015-02-25 13:52   ` Lee Jones
2015-02-25 13:52 ` [PATCH v4 3/9] ARM: multi_v7_defconfig: Enable support for ST's LPC RTC Lee Jones
2015-02-25 13:52   ` Lee Jones
2015-02-25 13:52 ` [PATCH v4 4/9] ARM: STi: DT: STiH407: Add Device Tree node for the LPC Lee Jones
2015-02-25 13:52   ` Lee Jones
2015-02-25 13:52 ` [PATCH v4 5/9] watchdog: bindings: Provide ST bindings for ST's LPC Watchdog device Lee Jones
2015-02-25 13:52   ` Lee Jones
2015-02-25 13:52 ` [PATCH v4 6/9] watchdog: st_wdt: Add new driver for ST's LPC Watchdog Lee Jones
2015-02-25 13:52   ` Lee Jones
2015-02-28 15:36   ` Paul Bolle [this message]
2015-02-28 15:36     ` Paul Bolle
2015-03-02  7:49     ` Lee Jones
2015-03-02  7:49       ` Lee Jones
2015-03-02  7:49       ` Lee Jones
2015-03-02  7:49       ` Lee Jones
2015-02-25 13:52 ` [PATCH v4 7/9] rtc: bindings: Provide ST bindings for ST's LPC RTC device Lee Jones
2015-02-25 13:52   ` Lee Jones
2015-02-25 13:52 ` [PATCH v4 8/9] rtc: st: add new driver for ST's LPC RTC Lee Jones
2015-02-25 13:52   ` Lee Jones
2015-02-25 13:52   ` Lee Jones
2015-02-25 13:52 ` [PATCH v4 9/9] MAINTAINERS: Add Watchdog and RTC files to STI's maintainer entry Lee Jones
2015-02-25 13:52   ` Lee Jones
2015-02-25 13:52   ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1425137789.24292.44.camel@x220 \
    --to=pebolle@tiscali.nl \
    --cc=a.zummo@towertech.it \
    --cc=david.paris@st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@stlinux.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=rtc-linux@googlegroups.com \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.