Difference b/w yocto kernels and normal linux.org kernels

[Raghavendra Kakarla <Raghavendra.Kakarla@inedasystems.com>]

Hi Paul Eggleton,
I have some doubt that is ,there is any difference between the linux kernels downloaded from the yocto and that are download from the kernel.org with same version number?
Can you please clarify the my doubt.

Thanks and Regards,
Raghavendra Kakarla__________________________________
______
From: Raghavendra Kakarla
Sent: Tuesday, March 3, 2015 5:47 PM
To: Paul Eggleton
Cc: yocto@yoctoproject.org
Subject: RE: SDK generation issue

Hi Paul Eggleton,

Shall i get any API information in the generated SDK documents.

Regards,
Raghavendra.
________________________________________
From: Paul Eggleton <paul.eggleton@linux.intel.com>
Sent: Tuesday, March 3, 2015 5:40 PM
To: Raghavendra Kakarla
Cc: yocto@yoctoproject.org
Subject: Re: SDK generation issue

Assuming you built the SDK you had installed with "doc-pkgs" in
SDKIMAGE_FEATURES, they would be in the target sysroot i.e.
<sdk-install-dir>/sysroots/<your-machine-arch>/usr/share/doc/

On Tuesday 03 March 2015 11:55:22 Raghavendra Kakarla wrote:
> Hi Paul Eggleton,
>
> Where can i get the documents generated by the yocto sdk.
>
> Regards,
> Raghavendra.
> ________________________________________
> From: Raghavendra Kakarla
> Sent: Tuesday, March 3, 2015 3:56 PM
> To: Paul Eggleton
> Cc: yocto@yoctoproject.org
> Subject: RE: SDK generation issue
>
> Hi Paul Eggleton,
>
> Thank you for your response.
>
> Now my issue is resolved.
>
> I have some doubts on yocto-sdk. Can you please clarify them.
>
> When i Built SDK for YOCTO, I am getting a cross compilation tool chain.
> With which i am able to build the applications for my platform. I wanted to
> confirm, whether SDK means  a toolchain to build the applications or is
> there something more (such as documentation, libraries, etc generated for
> our platform)
>
> Regards,
> Raghavendra.
>
> From: Paul Eggleton <paul.eggleton@linux.intel.com>
> Sent: Tuesday, March 3, 2015 3:07 PM
> To: Raghavendra Kakarla
> Cc: yocto@yoctoproject.org
> Subject: Re: SDK generation issue
>
> On Tuesday 03 March 2015 05:41:43 Raghavendra Kakarla wrote:
> > I am generated the yocto SDK using the yocto sdk script "bitbake
> > core-image-minimal -c populate_sdk" command. With this command I am able
> > to
> > generte the installation script file and .manifest file.
> >
> > I run the installation script file. After running installation script file
> > it propts that following message:
> >
> > Extracting SDK...done
> > Setting it up...done
> > SDK has been successfully set up and is ready to be used.
> >
> >
> > After this i run the ".
> > /opt/poky/1.7/environment-setup-mips32rel-poky-linux" and echo $PATH i got
> > the correct path.
> >
> > After this i built wrote a small example and try to build with the sdk
> > generated toolchain by running following command:
> >
> > mipsel-poky-linux-gcc test.c
>
> Use $CC instead of running the compiler directly so that you get the correct
> options.
>
> Cheers,
> Paul
>
>
> --
>
> Paul Eggleton
> Intel Open Source Technology Centre

--

Paul Eggleton
Intel Open Source Technology Centre