From: Mark Hatle <mark.hatle@windriver.com>
To: <yocto@yoctoproject.org>
Subject: Re: MIPS32r2 little endian bsp
Date: Fri, 6 Feb 2015 09:04:21 -0600 [thread overview]
Message-ID: <54D4D7F5.3010002@windriver.com> (raw)
In-Reply-To: <448358.208.1423126569683.JavaMail.kraghavendra@Raghavendra>
On 2/5/15 2:56 AM, Raghavendra Kakarla wrote:
> Hi,
>
> I need to create a bsp layer for my board which is having mips32r2 little endian processor.
>
> I gone through the YOCTO BSP user manual bit there is no information for little endian.
>
> When I create with the yoct-bsp command is taking the mips32 big endian only.
>
> Could you please help me in resolving this issue.
You will need to define a BSP that is little endian capable.
The BSP should define:
DEFAULTTUNE ?= "mips32r2el"
You can verify the setting using bitbake -e and inspecting the value of
DEFAULTTUNE. The BSP should set that value -before- the necessary line:
require conf/machine/include/tune-mips32r2.inc
(Note, Little endian is not nearly as well tested as big endian for mips. I
expect you will find some bugs, we'll be happy to take back any fixes for those
issues.)
--Mark
>
> Thanks and regards,
>
> Raghavendra.
>
next prev parent reply other threads:[~2015-02-06 15:04 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <10286402.11.1422626774586.JavaMail.kraghavendra@Raghavendra>
2015-01-30 14:08 ` Yocto-custom kernel build issue Raghavendra Kakarla
2015-01-30 16:34 ` Bruce Ashfield
2015-02-02 10:00 ` Raghavendra Kakarla
2015-02-03 12:40 ` yocto-custom-kernel issue Raghavendra Kakarla
2015-02-03 13:17 ` Sven Ebenfeld
2015-02-03 15:37 ` Bruce Ashfield
2015-02-05 8:56 ` MIPS32r2 little endian bsp Raghavendra Kakarla
2015-02-06 15:04 ` Mark Hatle [this message]
2015-02-10 8:17 ` Yocto-custom kernel build issue Raghavendra Kakarla
2015-02-10 11:00 ` Paul Eggleton
[not found] ` <2974616.30.1423571125144.JavaMail.kraghavendra@Raghavendra>
2015-02-10 13:36 ` Paul Eggleton
2015-02-11 4:55 ` Raghavendra Kakarla
2015-02-11 9:30 ` Paul Eggleton
2015-02-11 10:00 ` Raghavendra Kakarla
2015-03-03 5:41 ` SDK generation issue Raghavendra Kakarla
2015-03-03 9:37 ` Paul Eggleton
2015-03-03 10:26 ` Raghavendra Kakarla
2015-03-03 10:31 ` Paul Eggleton
2015-03-03 11:55 ` Raghavendra Kakarla
2015-03-03 12:10 ` Paul Eggleton
2015-03-03 12:17 ` Raghavendra Kakarla
2015-03-03 13:16 ` Paul Eggleton
2015-03-10 4:21 ` Difference b/w yocto kernels and normal linux.org kernels Raghavendra Kakarla
2015-03-10 4:33 ` Khem Raj
2015-03-10 4:45 ` Nicholas Krause
2015-03-13 8:14 ` Raghavendra Kakarla
2015-03-13 8:53 ` Paul Eggleton
2015-03-13 9:05 ` Albert K
2015-03-13 9:12 ` Paul Eggleton
2015-04-03 6:04 ` Raghavendra Kakarla
2015-03-03 17:55 ` SDK generation issue Jim Rafert
2015-03-10 12:03 OpenStack - Libvirt+Xen CI overview Bob Ball
2015-03-16 15:09 ` OpenStack - Libvirt+Xen CI overview : anyone interested in a walk/through or presentation on how it works Lars Kurth
2015-03-16 18:00 ` OpenStack - Libvirt+Xen CI overview Konrad Rzeszutek Wilk
2015-03-17 12:52 ` Dario Faggioli
2015-03-17 11:14 ` George Dunlap
2015-03-17 14:22 ` Jim Fehlig
2015-03-17 15:51 ` Alvin Starr
2015-03-18 13:12 ` OpenStack - Libvirt+Xen CI overview : anyone interested in a walk/through or presentation on how it works Lars Kurth
2015-03-18 14:37 ` Wei Liu
2015-03-24 18:17 ` Lars Kurth
2015-03-25 10:08 ` Ian Campbell
2015-03-25 10:09 ` Bob Ball
2015-03-25 12:26 ` Alvin Starr
2015-04-22 10:03 ` Lars Kurth
2015-06-04 17:12 ` Bob Ball
2015-06-05 11:47 ` Lars Kurth
2015-06-08 12:52 ` Bob Ball
2015-06-10 14:25 ` Bob Ball
2015-06-15 16:26 ` Bob Ball
-- strict thread matches above, loose matches on Subject: below --
2014-12-12 8:10 UBIFS: Is it possible to get the compressed size of a file? markus.heininger
2014-12-17 6:22 ` hujianyang
2014-12-18 11:08 ` Aw: " markus.heininger
2015-02-02 9:33 ` Artem Bityutskiy
2015-02-02 9:33 ` Artem Bityutskiy
2015-02-03 5:45 ` Andreas Dilger
2015-02-03 5:45 ` Andreas Dilger
2015-02-03 9:07 ` Artem Bityutskiy
2015-02-03 9:07 ` Artem Bityutskiy
2015-02-28 7:31 ` hujianyang
2015-02-28 7:31 ` hujianyang
2015-03-26 14:19 ` David Sterba
2015-03-26 14:19 ` David Sterba
2014-11-06 13:27 lots of connections in SYN_RECV state Puneet Agarwal
2014-11-06 14:30 ` Silvan Jegen
2014-11-06 15:15 ` Puneet Agarwal
2014-11-06 15:58 ` Silvan Jegen
2014-11-07 15:49 ` Dave Tian
2014-11-07 16:58 ` Valdis.Kletnieks at vt.edu
2014-11-07 23:48 ` Dave Tian
2014-11-07 17:41 ` Puneet Agarwal
2014-11-07 18:10 ` Valdis.Kletnieks at vt.edu
2014-11-08 2:05 ` Puneet Agarwal
2012-03-19 20:59 Linking two recipes simran singh
2012-03-19 21:22 ` Richard Purdie
2012-03-19 21:33 ` simran singh
2012-03-19 21:39 ` Christopher Larson
2012-03-19 21:57 ` simran singh
2012-03-19 21:59 ` Christopher Larson
2012-03-19 22:10 ` simran singh
2012-03-19 22:54 ` Richard Purdie
2012-03-20 19:25 ` simran singh
2012-04-07 3:44 ` Khem Raj
2005-01-11 9:28 [U-Boot-Users] PCI, Ethernet, IXDP425 Ara Avanesyan
2005-01-11 22:40 ` Wolfgang Denk
2005-01-12 6:18 ` [U-Boot-Users] " Ara Avanesyan
2005-01-12 6:41 ` Rodel Miguel
2005-01-12 7:41 ` Ara Avanesyan
2005-01-12 8:08 ` Ing.Gianfranco Morandi
2005-01-12 9:01 ` Wolfgang Denk
2005-01-12 9:32 ` Ara Avanesyan
2005-01-12 10:13 ` Anders Larsen
2005-01-12 14:16 ` Wolfgang Denk
2005-01-12 14:16 ` Wolfgang Denk
2005-01-12 15:07 ` Ara Avanesyan
2003-11-12 17:23 [U-Boot-Users] [PATCH] fix the ARM memory layout Anders Larsen
2003-11-12 19:52 ` Kyle Harris
2003-11-13 9:14 ` Anders Larsen
2003-11-13 14:19 ` Kyle Harris
2003-11-21 3:52 ` Kyle Harris
2003-11-21 7:47 ` Anders Larsen
2003-11-21 8:13 ` Wolfgang Denk
2003-12-07 0:17 ` Wolfgang Denk
2003-12-07 17:03 ` Anders Larsen
2004-01-09 11:14 ` Anders Larsen
2004-02-08 19:36 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54D4D7F5.3010002@windriver.com \
--to=mark.hatle@windriver.com \
--cc=yocto@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.