All of lore.kernel.org
 help / color / mirror / Atom feed
From: Quentin Lambert <lambert.quentin@gmail.com>
To: "David S. Miller" <davem@davemloft.net>,
	linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: kernel-janitors@vger.kernel.org,
	Quentin Lambert <lambert.quentin@gmail.com>
Subject: [PATCH v2] ide: remove deprecated use of pci api
Date: Mon, 13 Apr 2015 08:26:53 +0000	[thread overview]
Message-ID: <1428913613-12375-1-git-send-email-lambert.quentin@gmail.com> (raw)

Replace occurences of the pci api by appropriate call to the dma api.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr)

@deprecated@
idexpression id;
position p;
@@

(
  pci_dma_supported@p ( id, ...)
|
  pci_alloc_consistent@p ( id, ...)
)

@bad1@
idexpression id;
position deprecated.p;
@@
...when != &id->dev
   when != pci_get_drvdata ( id )
   when != pci_enable_device ( id )
(
  pci_dma_supported@p ( id, ...)
|
  pci_alloc_consistent@p ( id, ...)
)

@depends on !bad1@
idexpression id;
expression direction;
position deprecated.p;
@@

(
- pci_dma_supported@p ( id,
+ dma_supported ( &id->dev,
...
+ , GFP_ATOMIC
  )
|
- pci_alloc_consistent@p ( id,
+ dma_alloc_coherent ( &id->dev,
...
+ , GFP_ATOMIC
  )
)

Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
---
 Changes since v1:
  - fold the two patches into one, GFP_ATOMIC is now replaced by
    GFP_KERNEL

 drivers/ide/cs5520.c    |    2 +-
 drivers/ide/pmac.c      |    5 ++---
 drivers/ide/setup-pci.c |    2 +-
 drivers/ide/sgiioc4.c   |    4 ++--
 4 files changed, 6 insertions(+), 7 deletions(-)

--- a/drivers/ide/cs5520.c
+++ b/drivers/ide/cs5520.c
@@ -123,7 +123,7 @@ static int cs5520_init_one(struct pci_de
 		return -ENODEV;
 	}
 	pci_set_master(dev);
-	if (pci_set_dma_mask(dev, DMA_BIT_MASK(32))) {
+	if (dma_set_mask(&dev->dev, DMA_BIT_MASK(32))) {
 		printk(KERN_WARNING "%s: No suitable DMA available.\n",
 			d->name);
 		return -ENODEV;
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -1689,10 +1689,9 @@ static int pmac_ide_init_dma(ide_hwif_t
 	 * The +2 is +1 for the stop command and +1 to allow for
 	 * aligning the start address to a multiple of 16 bytes.
 	 */
-	pmif->dma_table_cpu = pci_alloc_consistent(
-		dev,
+	pmif->dma_table_cpu = dma_alloc_coherent(&dev->dev,
 		(MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
-		&hwif->dmatable_dma);
+		&hwif->dmatable_dma, GFP_KERNEL);
 	if (pmif->dma_table_cpu = NULL) {
 		printk(KERN_ERR "%s: unable to allocate DMA command list\n",
 		       hwif->name);
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -209,7 +209,7 @@ static int ide_pci_enable(struct pci_dev
 	 * a DMA mask field to the struct ide_port_info if we need it
 	 * (or let lower level driver set the DMA mask)
 	 */
-	ret = pci_set_dma_mask(dev, DMA_BIT_MASK(32));
+	ret = dma_set_mask(&dev->dev, DMA_BIT_MASK(32));
 	if (ret < 0) {
 		printk(KERN_ERR "%s %s: can't set DMA mask\n",
 			d->name, pci_name(dev));
--- a/drivers/ide/sgiioc4.c
+++ b/drivers/ide/sgiioc4.c
@@ -334,8 +334,8 @@ static int ide_dma_sgiioc4(ide_hwif_t *h
 	if (ide_allocate_dma_engine(hwif))
 		goto dma_pci_alloc_failure;
 
-	pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE,
-				   (dma_addr_t *)&hwif->extra_base);
+	pad = dma_alloc_coherent(&dev->dev, IOC4_IDE_CACHELINE_SIZE,
+				   (dma_addr_t *)&hwif->extra_base, GFP_KERNEL);
 	if (pad) {
 		ide_set_hwifdata(hwif, pad);
 		return 0;

WARNING: multiple messages have this Message-ID (diff)
From: Quentin Lambert <lambert.quentin@gmail.com>
To: "David S. Miller" <davem@davemloft.net>,
	linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: kernel-janitors@vger.kernel.org,
	Quentin Lambert <lambert.quentin@gmail.com>
Subject: [PATCH v2] ide: remove deprecated use of pci api
Date: Mon, 13 Apr 2015 10:26:53 +0200	[thread overview]
Message-ID: <1428913613-12375-1-git-send-email-lambert.quentin@gmail.com> (raw)

Replace occurences of the pci api by appropriate call to the dma api.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr)

@deprecated@
idexpression id;
position p;
@@

(
  pci_dma_supported@p ( id, ...)
|
  pci_alloc_consistent@p ( id, ...)
)

@bad1@
idexpression id;
position deprecated.p;
@@
...when != &id->dev
   when != pci_get_drvdata ( id )
   when != pci_enable_device ( id )
(
  pci_dma_supported@p ( id, ...)
|
  pci_alloc_consistent@p ( id, ...)
)

@depends on !bad1@
idexpression id;
expression direction;
position deprecated.p;
@@

(
- pci_dma_supported@p ( id,
+ dma_supported ( &id->dev,
...
+ , GFP_ATOMIC
  )
|
- pci_alloc_consistent@p ( id,
+ dma_alloc_coherent ( &id->dev,
...
+ , GFP_ATOMIC
  )
)

Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
---
 Changes since v1:
  - fold the two patches into one, GFP_ATOMIC is now replaced by
    GFP_KERNEL

 drivers/ide/cs5520.c    |    2 +-
 drivers/ide/pmac.c      |    5 ++---
 drivers/ide/setup-pci.c |    2 +-
 drivers/ide/sgiioc4.c   |    4 ++--
 4 files changed, 6 insertions(+), 7 deletions(-)

--- a/drivers/ide/cs5520.c
+++ b/drivers/ide/cs5520.c
@@ -123,7 +123,7 @@ static int cs5520_init_one(struct pci_de
 		return -ENODEV;
 	}
 	pci_set_master(dev);
-	if (pci_set_dma_mask(dev, DMA_BIT_MASK(32))) {
+	if (dma_set_mask(&dev->dev, DMA_BIT_MASK(32))) {
 		printk(KERN_WARNING "%s: No suitable DMA available.\n",
 			d->name);
 		return -ENODEV;
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -1689,10 +1689,9 @@ static int pmac_ide_init_dma(ide_hwif_t
 	 * The +2 is +1 for the stop command and +1 to allow for
 	 * aligning the start address to a multiple of 16 bytes.
 	 */
-	pmif->dma_table_cpu = pci_alloc_consistent(
-		dev,
+	pmif->dma_table_cpu = dma_alloc_coherent(&dev->dev,
 		(MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
-		&hwif->dmatable_dma);
+		&hwif->dmatable_dma, GFP_KERNEL);
 	if (pmif->dma_table_cpu == NULL) {
 		printk(KERN_ERR "%s: unable to allocate DMA command list\n",
 		       hwif->name);
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -209,7 +209,7 @@ static int ide_pci_enable(struct pci_dev
 	 * a DMA mask field to the struct ide_port_info if we need it
 	 * (or let lower level driver set the DMA mask)
 	 */
-	ret = pci_set_dma_mask(dev, DMA_BIT_MASK(32));
+	ret = dma_set_mask(&dev->dev, DMA_BIT_MASK(32));
 	if (ret < 0) {
 		printk(KERN_ERR "%s %s: can't set DMA mask\n",
 			d->name, pci_name(dev));
--- a/drivers/ide/sgiioc4.c
+++ b/drivers/ide/sgiioc4.c
@@ -334,8 +334,8 @@ static int ide_dma_sgiioc4(ide_hwif_t *h
 	if (ide_allocate_dma_engine(hwif))
 		goto dma_pci_alloc_failure;
 
-	pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE,
-				   (dma_addr_t *)&hwif->extra_base);
+	pad = dma_alloc_coherent(&dev->dev, IOC4_IDE_CACHELINE_SIZE,
+				   (dma_addr_t *)&hwif->extra_base, GFP_KERNEL);
 	if (pad) {
 		ide_set_hwifdata(hwif, pad);
 		return 0;

             reply	other threads:[~2015-04-13  8:26 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-13  8:26 Quentin Lambert [this message]
2015-04-13  8:26 ` [PATCH v2] ide: remove deprecated use of pci api Quentin Lambert
2015-04-13  9:56 ` Dan Carpenter
2015-04-13  9:56   ` Dan Carpenter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1428913613-12375-1-git-send-email-lambert.quentin@gmail.com \
    --to=lambert.quentin@gmail.com \
    --cc=davem@davemloft.net \
    --cc=kernel-janitors@vger.kernel.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.