From: Hannes Reinecke <hare@suse.de>
To: James Bottomley <jbottomley@parallels.com>
Cc: Christoph Hellwig <hch@lst.de>,
Ondrey Zary <linux@rainbow-software.org>,
Doug Gilberg <dgilbert@interlog.com>,
linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCH 08/23] advansys: use standard data types
Date: Fri, 24 Apr 2015 13:18:27 +0200 [thread overview]
Message-ID: <1429874322-85488-10-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1429874322-85488-1-git-send-email-hare@suse.de>
No point in defining our own.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 172 +++++++++++++++++++-----------------------------
1 file changed, 66 insertions(+), 106 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index b02c999c..1f9d6464 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -76,20 +76,6 @@
/* Enable driver tracing. */
#undef ADVANSYS_DEBUG
-/*
- * Portable Data Types
- *
- * Any instance where a 32-bit long or pointer type is assumed
- * for precision or HW defined structures, the following define
- * types must be used. In Linux the char, short, and int types
- * are all consistent at 8, 16, and 32 bits respectively. Pointers
- * and long types are 64 bits on Alpha and UltraSPARC.
- */
-#define ASC_PADDR __u32 /* Physical/Bus address data type. */
-#define ASC_VADDR __u32 /* Virtual address data type. */
-#define ASC_DCNT __u32 /* Unsigned Data count type. */
-#define ASC_SDCNT __s32 /* Signed Data count type. */
-
typedef unsigned char uchar;
#ifndef TRUE
@@ -307,9 +293,9 @@ typedef struct asc_scsiq_1 {
uchar sg_queue_cnt;
uchar target_id;
uchar target_lun;
- ASC_PADDR data_addr;
- ASC_DCNT data_cnt;
- ASC_PADDR sense_addr;
+ __le32 data_addr;
+ __le32 data_cnt;
+ __le32 sense_addr;
uchar sense_len;
uchar extra_bytes;
} ASC_SCSIQ_1;
@@ -338,8 +324,8 @@ typedef struct asc_scsiq_4 {
uchar y_res;
ushort x_req_count;
ushort x_reconnect_rtn;
- ASC_PADDR x_saved_data_addr;
- ASC_DCNT x_saved_data_cnt;
+ __le32 x_saved_data_addr;
+ __le32 x_saved_data_cnt;
} ASC_SCSIQ_4;
typedef struct asc_q_done_info {
@@ -351,12 +337,12 @@ typedef struct asc_q_done_info {
uchar sense_len;
uchar extra_bytes;
uchar res;
- ASC_DCNT remain_bytes;
+ u32 remain_bytes;
} ASC_QDONE_INFO;
typedef struct asc_sg_list {
- ASC_PADDR addr;
- ASC_DCNT bytes;
+ __le32 addr;
+ __le32 bytes;
} ASC_SG_LIST;
typedef struct asc_sg_head {
@@ -586,13 +572,13 @@ typedef struct asc_dvc_var {
char redo_scam;
ushort res2;
uchar dos_int13_table[ASC_MAX_TID + 1];
- ASC_DCNT max_dma_count;
+ unsigned int max_dma_count;
ASC_SCSI_BIT_ID_TYPE no_scam;
ASC_SCSI_BIT_ID_TYPE pci_fix_asyn_xfer;
uchar min_sdtr_index;
uchar max_sdtr_index;
struct asc_board *drv_ptr;
- ASC_DCNT uc_break;
+ unsigned int uc_break;
} ASC_DVC_VAR;
typedef struct asc_dvc_inq_info {
@@ -600,8 +586,8 @@ typedef struct asc_dvc_inq_info {
} ASC_DVC_INQ_INFO;
typedef struct asc_cap_info {
- ASC_DCNT lba;
- ASC_DCNT blk_size;
+ u32 lba;
+ u32 blk_size;
} ASC_CAP_INFO;
typedef struct asc_cap_info_array {
@@ -928,20 +914,6 @@ typedef struct asc_mc_saved {
#define AscWriteChipDvcID(port, data) outp((port)+IOP_REG_ID, data)
/*
- * Portable Data Types
- *
- * Any instance where a 32-bit long or pointer type is assumed
- * for precision or HW defined structures, the following define
- * types must be used. In Linux the char, short, and int types
- * are all consistent at 8, 16, and 32 bits respectively. Pointers
- * and long types are 64 bits on Alpha and UltraSPARC.
- */
-#define ADV_PADDR __u32 /* Physical address data type. */
-#define ADV_VADDR __u32 /* Virtual address data type. */
-#define ADV_DCNT __u32 /* Unsigned Data count type. */
-#define ADV_SDCNT __s32 /* Signed Data count type. */
-
-/*
* These macros are used to convert a virtual address to a
* 32-bit value. This currently can be used on Linux Alpha
* which uses 64-bit virtual address but a 32-bit bus address.
@@ -949,7 +921,6 @@ typedef struct asc_mc_saved {
* will give us time to change the HW and FW to handle 64-bit
* addresses.
*/
-#define ADV_VADDR_TO_U32 virt_to_bus
#define ADV_U32_TO_VADDR bus_to_virt
#define AdvPortAddr void __iomem * /* Virtual memory address size */
@@ -1843,8 +1814,8 @@ typedef struct adv_scsi_req_q {
uchar target_cmd;
uchar target_id; /* Device target identifier. */
uchar target_lun; /* Device target logical unit number. */
- ADV_PADDR data_addr; /* Data buffer physical address. */
- ADV_DCNT data_cnt; /* Data count. Ucode sets to residual. */
+ __le32 data_addr; /* Data buffer physical address. */
+ __le32 data_cnt; /* Data count. Ucode sets to residual. */
__le32 sense_addr;
__le32 carr_pa;
uchar mflag;
@@ -1856,7 +1827,7 @@ typedef struct adv_scsi_req_q {
uchar host_status; /* Ucode host status. */
uchar sg_working_ix;
uchar cdb[12]; /* SCSI CDB bytes 0-11. */
- ADV_PADDR sg_real_addr; /* SG list physical address. */
+ __le32 sg_real_addr; /* SG list physical address. */
__le32 scsiq_rptr;
uchar cdb16[4]; /* SCSI CDB bytes 12-15. */
__le32 scsiq_ptr;
@@ -2151,8 +2122,6 @@ do { \
#define QHSTA_M_SGBACKUP_ERROR 0x47 /* Scatter-Gather backup error */
/* Return the address that is aligned at the next doubleword >= to 'addr'. */
-#define ADV_8BALIGN(addr) (((ulong) (addr) + 0x7) & ~0x7)
-#define ADV_16BALIGN(addr) (((ulong) (addr) + 0xF) & ~0xF)
#define ADV_32BALIGN(addr) (((ulong) (addr) + 0x1F) & ~0x1F)
/*
@@ -2313,24 +2282,24 @@ do { \
/* Per board statistics structure */
struct asc_stats {
/* Driver Entrypoint Statistics */
- ADV_DCNT queuecommand; /* # calls to advansys_queuecommand() */
- ADV_DCNT reset; /* # calls to advansys_eh_bus_reset() */
- ADV_DCNT biosparam; /* # calls to advansys_biosparam() */
- ADV_DCNT interrupt; /* # advansys_interrupt() calls */
- ADV_DCNT callback; /* # calls to asc/adv_isr_callback() */
- ADV_DCNT done; /* # calls to request's scsi_done function */
- ADV_DCNT build_error; /* # asc/adv_build_req() ASC_ERROR returns. */
- ADV_DCNT adv_build_noreq; /* # adv_build_req() adv_req_t alloc. fail. */
- ADV_DCNT adv_build_nosg; /* # adv_build_req() adv_sgblk_t alloc. fail. */
+ unsigned int queuecommand; /* # calls to advansys_queuecommand() */
+ unsigned int reset; /* # calls to advansys_eh_bus_reset() */
+ unsigned int biosparam; /* # calls to advansys_biosparam() */
+ unsigned int interrupt; /* # advansys_interrupt() calls */
+ unsigned int callback; /* # calls to asc/adv_isr_callback() */
+ unsigned int done; /* # calls to request's scsi_done function */
+ unsigned int build_error; /* # asc/adv_build_req() ASC_ERROR returns. */
+ unsigned int adv_build_noreq; /* # adv_build_req() adv_req_t alloc. fail. */
+ unsigned int adv_build_nosg; /* # adv_build_req() adv_sgblk_t alloc. fail. */
/* AscExeScsiQueue()/AdvExeScsiQueue() Statistics */
- ADV_DCNT exe_noerror; /* # ASC_NOERROR returns. */
- ADV_DCNT exe_busy; /* # ASC_BUSY returns. */
- ADV_DCNT exe_error; /* # ASC_ERROR returns. */
- ADV_DCNT exe_unknown; /* # unknown returns. */
+ unsigned int exe_noerror; /* # ASC_NOERROR returns. */
+ unsigned int exe_busy; /* # ASC_BUSY returns. */
+ unsigned int exe_error; /* # ASC_ERROR returns. */
+ unsigned int exe_unknown; /* # unknown returns. */
/* Data Transfer Statistics */
- ADV_DCNT xfer_cnt; /* # I/O requests received */
- ADV_DCNT xfer_elem; /* # scatter-gather elements */
- ADV_DCNT xfer_sect; /* # 512-byte blocks */
+ unsigned int xfer_cnt; /* # I/O requests received */
+ unsigned int xfer_elem; /* # scatter-gather elements */
+ unsigned int xfer_sect; /* # 512-byte blocks */
};
#endif /* ADVANSYS_STATS */
@@ -3895,15 +3864,15 @@ static ushort AscReadLramWord(PortAddr iop_base, ushort addr)
}
#if CC_VERY_LONG_SG_LIST
-static ASC_DCNT AscReadLramDWord(PortAddr iop_base, ushort addr)
+static u32 AscReadLramDWord(PortAddr iop_base, ushort addr)
{
ushort val_low, val_high;
- ASC_DCNT dword_data;
+ u32 dword_data;
AscSetChipLramAddr(iop_base, addr);
val_low = AscGetChipLramData(iop_base);
val_high = AscGetChipLramData(iop_base);
- dword_data = ((ASC_DCNT) val_high << 16) | (ASC_DCNT) val_low;
+ dword_data = ((u32) val_high << 16) | (u32) val_low;
return (dword_data);
}
#endif /* CC_VERY_LONG_SG_LIST */
@@ -4009,12 +3978,11 @@ AscMemWordCopyPtrFromLram(PortAddr iop_base,
}
}
-static ASC_DCNT AscMemSumLramWord(PortAddr iop_base, ushort s_addr, int words)
+static u32 AscMemSumLramWord(PortAddr iop_base, ushort s_addr, int words)
{
- ASC_DCNT sum;
+ u32 sum = 0;
int i;
- sum = 0L;
for (i = 0; i < words; i++, s_addr += 2) {
sum += AscReadLramWord(iop_base, s_addr);
}
@@ -4071,11 +4039,11 @@ static ushort AscInitLram(ASC_DVC_VAR *asc_dvc)
return warn_code;
}
-static ASC_DCNT
+static u32
AscLoadMicroCode(PortAddr iop_base, ushort s_addr,
const uchar *mcode_buf, ushort mcode_size)
{
- ASC_DCNT chksum;
+ u32 chksum;
ushort mcode_word_size;
ushort mcode_chksum;
@@ -4132,8 +4100,8 @@ static ushort AscInitMicroCodeVar(ASC_DVC_VAR *asc_dvc)
int i;
ushort warn_code;
PortAddr iop_base;
- ASC_PADDR phy_addr;
- ASC_DCNT phy_size;
+ __le32 phy_addr;
+ __le32 phy_size;
struct asc_board *board = asc_dvc_to_board(asc_dvc);
iop_base = asc_dvc->iop_base;
@@ -4277,7 +4245,7 @@ static int AdvLoadMicrocode(AdvPortAddr iop_base, const unsigned char *buf,
int size, int memsize, int chksum)
{
int i, j, end, len = 0;
- ADV_DCNT sum;
+ u32 sum;
AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, 0);
@@ -4407,10 +4375,9 @@ static adv_req_t * adv_get_reqp(struct adv_dvc_var *adv_dvc, u32 offset)
*/
static int
AdvSendIdleCmd(ADV_DVC_VAR *asc_dvc,
- ushort idle_cmd, ADV_DCNT idle_cmd_parameter)
+ ushort idle_cmd, u32 idle_cmd_parameter)
{
- int result;
- ADV_DCNT i, j;
+ int result, i, j;
AdvPortAddr iop_base;
iop_base = asc_dvc->iop_base;
@@ -6068,7 +6035,7 @@ static void adv_isr_callback(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp)
adv_req_t *reqp;
adv_sgblk_t *sgblkp;
struct scsi_cmnd *scp;
- ADV_DCNT resid_cnt;
+ u32 resid_cnt;
dma_addr_t sense_addr;
ASC_DBG(1, "adv_dvc_varp 0x%p, scsiqp 0x%p\n",
@@ -6234,7 +6201,7 @@ static int AdvISR(ADV_DVC_VAR *asc_dvc)
uchar int_stat;
ushort target_bit;
ADV_CARR_T *free_carrp;
- ADV_VADDR irq_next_vpa;
+ __le32 irq_next_vpa;
ADV_SCSI_REQ_Q *scsiq;
adv_req_t *reqp;
@@ -6968,7 +6935,7 @@ DvcGetQinfo(PortAddr iop_base, ushort s_addr, uchar *inbuf, int words)
static uchar
_AscCopyLramScsiDoneQ(PortAddr iop_base,
ushort q_addr,
- ASC_QDONE_INFO *scsiq, ASC_DCNT max_dma_count)
+ ASC_QDONE_INFO *scsiq, unsigned int max_dma_count)
{
ushort _val;
uchar sg_queue_cnt;
@@ -6995,10 +6962,10 @@ _AscCopyLramScsiDoneQ(PortAddr iop_base,
/*
* Read high word of remain bytes from alternate location.
*/
- scsiq->remain_bytes = (((ADV_DCNT)AscReadLramWord(iop_base,
- (ushort)(q_addr +
- (ushort)
- ASC_SCSIQ_W_ALT_DC1)))
+ scsiq->remain_bytes = (((u32)AscReadLramWord(iop_base,
+ (ushort)(q_addr +
+ (ushort)
+ ASC_SCSIQ_W_ALT_DC1)))
<< 16);
/*
* Read low word of remain bytes from original location.
@@ -7224,8 +7191,7 @@ static int AscIsrQDone(ASC_DVC_VAR *asc_dvc)
} else if (scsiq->q_status == QS_DONE) {
false_overrun = FALSE;
if (scsiq->extra_bytes != 0) {
- scsiq->remain_bytes +=
- (ADV_DCNT)scsiq->extra_bytes;
+ scsiq->remain_bytes += scsiq->extra_bytes;
}
if (scsiq->d3.done_stat == QD_WITH_ERROR) {
if (scsiq->d3.host_stat ==
@@ -8265,8 +8231,8 @@ AscPutReadySgListQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq, uchar q_no)
int i;
ASC_SG_HEAD *sg_head;
ASC_SG_LIST_Q scsi_sg_q;
- ASC_DCNT saved_data_addr;
- ASC_DCNT saved_data_cnt;
+ __le32 saved_data_addr;
+ __le32 saved_data_cnt;
PortAddr iop_base;
ushort sg_list_dwords;
ushort sg_index;
@@ -8278,8 +8244,8 @@ AscPutReadySgListQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq, uchar q_no)
sg_head = scsiq->sg_head;
saved_data_addr = scsiq->q1.data_addr;
saved_data_cnt = scsiq->q1.data_cnt;
- scsiq->q1.data_addr = (ASC_PADDR) sg_head->sg_list[0].addr;
- scsiq->q1.data_cnt = (ASC_DCNT) sg_head->sg_list[0].bytes;
+ scsiq->q1.data_addr = sg_head->sg_list[0].addr;
+ scsiq->q1.data_cnt = sg_head->sg_list[0].bytes;
#if CC_VERY_LONG_SG_LIST
/*
* If sg_head->entry_cnt is greater than ASC_MAX_SG_LIST
@@ -8459,7 +8425,7 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
int n_q_required;
int disable_syn_offset_one_fix;
int i;
- ASC_PADDR addr;
+ u32 addr;
ushort sg_entry_cnt = 0;
ushort sg_entry_cnt_minus_one = 0;
uchar target_ix;
@@ -8469,7 +8435,7 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
uchar scsi_cmd;
uchar disable_cmd;
ASC_SG_HEAD *sg_head;
- ASC_DCNT data_cnt;
+ unsigned long data_cnt;
iop_base = asc_dvc->iop_base;
sg_head = scsiq->sg_head;
@@ -8515,10 +8481,8 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
}
#endif /* !CC_VERY_LONG_SG_LIST */
if (sg_entry_cnt == 1) {
- scsiq->q1.data_addr =
- (ADV_PADDR)sg_head->sg_list[0].addr;
- scsiq->q1.data_cnt =
- (ADV_DCNT)sg_head->sg_list[0].bytes;
+ scsiq->q1.data_addr = sg_head->sg_list[0].addr;
+ scsiq->q1.data_cnt = sg_head->sg_list[0].bytes;
scsiq->q1.cntl &= ~(QC_SG_HEAD | QC_SG_SWAP_QUEUE);
}
sg_entry_cnt_minus_one = sg_entry_cnt - 1;
@@ -8530,9 +8494,8 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
if (scsiq->q1.cntl & QC_SG_HEAD) {
data_cnt = 0;
for (i = 0; i < sg_entry_cnt; i++) {
- data_cnt +=
- (ADV_DCNT)le32_to_cpu(sg_head->sg_list[i].
- bytes);
+ data_cnt += le32_to_cpu(sg_head->sg_list[i].
+ bytes);
}
} else {
data_cnt = le32_to_cpu(scsiq->q1.data_cnt);
@@ -8569,12 +8532,11 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
if (asc_dvc->bug_fix_cntl & ASC_BUG_FIX_IF_NOT_DWB) {
if ((scsi_cmd == READ_6) ||
(scsi_cmd == READ_10)) {
- addr =
- (ADV_PADDR)le32_to_cpu(sg_head->
+ addr = le32_to_cpu(sg_head->
sg_list
[sg_entry_cnt_minus_one].
addr) +
- (ADV_DCNT)le32_to_cpu(sg_head->
+ le32_to_cpu(sg_head->
sg_list
[sg_entry_cnt_minus_one].
bytes);
@@ -8595,8 +8557,7 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
sg_list
[sg_entry_cnt_minus_one].
bytes);
- data_cnt -=
- (ASC_DCNT) extra_bytes;
+ data_cnt -= extra_bytes;
sg_head->
sg_list
[sg_entry_cnt_minus_one].
@@ -8651,8 +8612,7 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
== 0) {
scsiq->q2.tag_code |=
ASC_TAG_FLAG_EXTRA_BYTES;
- data_cnt -= (ASC_DCNT)
- extra_bytes;
+ data_cnt -= extra_bytes;
scsiq->q1.data_cnt =
cpu_to_le32
(data_cnt);
@@ -9015,7 +8975,7 @@ static int AscStopQueueExe(PortAddr iop_base)
return (0);
}
-static ASC_DCNT AscGetMaxDmaCount(ushort bus_type)
+static unsigned int AscGetMaxDmaCount(ushort bus_type)
{
if (bus_type & ASC_IS_ISA)
return ASC_MAX_ISA_DMA_COUNT;
--
1.8.5.2
next prev parent reply other threads:[~2015-04-24 11:18 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-24 11:18 [PATCHv3 00/23] Nobody loves the advansys driver Hannes Reinecke
2015-04-24 11:18 ` [PATCH 1/2] advansys: Update to version 3.5 and remove compilation warning Hannes Reinecke
2015-04-24 11:19 ` Hannes Reinecke
2015-04-24 11:18 ` [PATCH 01/23] advansys: use host_reset Hannes Reinecke
2015-04-24 11:18 ` [PATCH 02/23] advansys: use shared host tag map for command lookup Hannes Reinecke
2015-04-24 11:18 ` [PATCH 03/23] advansys: use DMA-API for mapping sense buffer Hannes Reinecke
2015-04-24 11:18 ` [PATCH 04/23] advansys: Use DMA-API for carrier buffer Hannes Reinecke
2015-04-24 11:18 ` [PATCH 05/23] advansys: Use DMA-API for mapping request blocks Hannes Reinecke
2015-04-24 11:18 ` [PATCH 06/23] advansys: Use dma_pool for sg elements Hannes Reinecke
2015-04-24 11:18 ` [PATCH 07/23] advansys: use 'bool' instead of 'int' Hannes Reinecke
2015-04-24 11:18 ` Hannes Reinecke [this message]
2015-04-24 11:18 ` [PATCH 09/23] advansys: Remove 'TRUE' and 'FALSE' definitions Hannes Reinecke
2015-04-24 11:18 ` [PATCH 10/23] advansys: remove 'ERR' definition Hannes Reinecke
2015-04-24 11:18 ` [PATCH 11/23] advansys: Make AscIsrChipHalted() a void function Hannes Reinecke
2015-04-24 11:18 ` [PATCH 12/23] advansys: cleanup function return codes Hannes Reinecke
2015-04-24 11:18 ` [PATCH 13/23] advansys: scsi_q1->data_addr is little endian Hannes Reinecke
2015-04-24 11:18 ` [PATCH 14/23] advansys: Remove ASC_SCSI_REQ_Q Hannes Reinecke
2015-04-24 11:18 ` [PATCH 15/23] advansys: Remove CC_VERY_LONG_SG_LIST Hannes Reinecke
2015-04-24 11:18 ` [PATCH 16/23] advansys: rename 'ASC_RQ_XX' to 'ADV_RQ_XX' Hannes Reinecke
2015-04-24 11:18 ` [PATCH 17/23] advansys: Remove 'a_flag' Hannes Reinecke
2015-04-24 11:18 ` [PATCH 18/23] advansys: Remove obsolete virtual memory mapping comment Hannes Reinecke
2015-04-24 11:18 ` [PATCH 19/23] advansys: Remove cmd_per_lun setting Hannes Reinecke
2015-04-26 14:57 ` Ondrej Zary
2015-04-26 16:55 ` Christoph Hellwig
2015-04-26 18:23 ` Ondrej Zary
2015-04-26 18:52 ` James Bottomley
2015-04-27 7:02 ` Hannes Reinecke
2015-04-28 21:15 ` James Bottomley
2015-04-24 11:18 ` [PATCH 20/23] advansys: Check for DMA mapping errors Hannes Reinecke
2015-04-24 11:18 ` [PATCH 21/23] advansys: use spin_lock_irqsave() in interrupt handler Hannes Reinecke
2015-04-24 11:18 ` [PATCH 22/23] advansys: Remove call to dma_cache_sync() Hannes Reinecke
2015-04-24 11:18 ` [PATCH 23/23] advansys: Update to version 3.5 and remove compilation warning Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1429874322-85488-10-git-send-email-hare@suse.de \
--to=hare@suse.de \
--cc=dgilbert@interlog.com \
--cc=hch@lst.de \
--cc=jbottomley@parallels.com \
--cc=linux-scsi@vger.kernel.org \
--cc=linux@rainbow-software.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.