All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hannes Reinecke <hare@suse.de>
To: James Bottomley <jbottomley@parallels.com>
Cc: Christoph Hellwig <hch@lst.de>,
	Ondrey Zary <linux@rainbow-software.org>,
	Doug Gilberg <dgilbert@interlog.com>,
	linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCH 09/23] advansys: Remove 'TRUE' and 'FALSE' definitions
Date: Fri, 24 Apr 2015 13:18:28 +0200	[thread overview]
Message-ID: <1429874322-85488-11-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1429874322-85488-1-git-send-email-hare@suse.de>

Use 'bool' type instead.

Signed-off-by: Hannes Reinecke <hare@suse.de>
---
 drivers/scsi/advansys.c | 79 ++++++++++++++++++++++++-------------------------
 1 file changed, 38 insertions(+), 41 deletions(-)

diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 1f9d6464..973c3d8 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -78,13 +78,6 @@
 
 typedef unsigned char uchar;
 
-#ifndef TRUE
-#define TRUE     (1)
-#endif
-#ifndef FALSE
-#define FALSE    (0)
-#endif
-
 #define ERR      (-1)
 #define UW_ERR   (uint)(0xFFFF)
 #define isodd_word(val)   ((((uint)val) & (uint)0x0001) != 0)
@@ -556,7 +549,7 @@ typedef struct asc_dvc_var {
 	dma_addr_t overrun_dma;
 	uchar scsi_reset_wait;
 	uchar chip_no;
-	char is_in_int;
+	bool is_in_int;
 	uchar max_total_qng;
 	uchar cur_total_qng;
 	uchar in_critical_cnt;
@@ -3754,7 +3747,7 @@ static int AscStartChip(PortAddr iop_base)
 	return (1);
 }
 
-static int AscStopChip(PortAddr iop_base)
+static bool AscStopChip(PortAddr iop_base)
 {
 	uchar cc_val;
 
@@ -3765,9 +3758,9 @@ static int AscStopChip(PortAddr iop_base)
 	AscSetChipIH(iop_base, INS_HALT);
 	AscSetChipIH(iop_base, INS_RFLAG_WTM);
 	if ((AscGetChipStatus(iop_base) & CSW_HALTED) == 0) {
-		return (0);
+		return false;
 	}
-	return (1);
+	return true;
 }
 
 static bool AscIsChipHalted(PortAddr iop_base)
@@ -6453,7 +6446,7 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc)
 	EXT_MSG ext_msg;
 	EXT_MSG out_msg;
 	ushort halt_q_addr;
-	int sdtr_accept;
+	bool sdtr_accept;
 	ushort int_halt_code;
 	ASC_SCSI_BIT_ID_TYPE scsi_busy;
 	ASC_SCSI_BIT_ID_TYPE target_id;
@@ -6512,10 +6505,10 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc)
 		if (ext_msg.msg_type == EXTENDED_MESSAGE &&
 		    ext_msg.msg_req == EXTENDED_SDTR &&
 		    ext_msg.msg_len == MS_SDTR_LEN) {
-			sdtr_accept = TRUE;
+			sdtr_accept = true;
 			if ((ext_msg.req_ack_offset > ASC_SYN_MAX_OFFSET)) {
 
-				sdtr_accept = FALSE;
+				sdtr_accept = false;
 				ext_msg.req_ack_offset = ASC_SYN_MAX_OFFSET;
 			}
 			if ((ext_msg.xfer_period <
@@ -6523,7 +6516,7 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc)
 			    || (ext_msg.xfer_period >
 				asc_dvc->sdtr_period_tbl[asc_dvc->
 							 max_sdtr_index])) {
-				sdtr_accept = FALSE;
+				sdtr_accept = false;
 				ext_msg.xfer_period =
 				    asc_dvc->sdtr_period_tbl[asc_dvc->
 							     min_sdtr_index];
@@ -7111,7 +7104,7 @@ static int AscIsrQDone(ASC_DVC_VAR *asc_dvc)
 	uchar cur_target_qng;
 	ASC_QDONE_INFO scsiq_buf;
 	ASC_QDONE_INFO *scsiq;
-	int false_overrun;
+	bool false_overrun;
 
 	iop_base = asc_dvc->iop_base;
 	n_q_used = 1;
@@ -7189,7 +7182,11 @@ static int AscIsrQDone(ASC_DVC_VAR *asc_dvc)
 		    ((scsiq->q_status & QS_ABORTED) != 0)) {
 			return (0x11);
 		} else if (scsiq->q_status == QS_DONE) {
-			false_overrun = FALSE;
+			/*
+			 * This is also curious.
+			 * false_overrun will _always_ be set to 'false'
+			 */
+			false_overrun = false;
 			if (scsiq->extra_bytes != 0) {
 				scsiq->remain_bytes += scsiq->extra_bytes;
 			}
@@ -7262,23 +7259,23 @@ static int AscISR(ASC_DVC_VAR *asc_dvc)
 	uchar host_flag;
 
 	iop_base = asc_dvc->iop_base;
-	int_pending = FALSE;
+	int_pending = ASC_FALSE;
 
 	if (AscIsIntPending(iop_base) == 0)
 		return int_pending;
 
 	if ((asc_dvc->init_state & ASC_INIT_STATE_END_LOAD_MC) == 0) {
-		return ERR;
+		return ASC_ERROR;
 	}
 	if (asc_dvc->in_critical_cnt != 0) {
 		AscSetLibErrorCode(asc_dvc, ASCQ_ERR_ISR_ON_CRITICAL);
-		return ERR;
+		return ASC_ERROR;
 	}
 	if (asc_dvc->is_in_int) {
 		AscSetLibErrorCode(asc_dvc, ASCQ_ERR_ISR_RE_ENTRY);
-		return ERR;
+		return ASC_ERROR;
 	}
-	asc_dvc->is_in_int = TRUE;
+	asc_dvc->is_in_int = true;
 	ctrl_reg = AscGetChipControl(iop_base);
 	saved_ctrl_reg = ctrl_reg & (~(CC_SCSI_RESET | CC_CHIP_RESET |
 				       CC_SINGLE_STEP | CC_DIAG | CC_TEST));
@@ -7286,7 +7283,7 @@ static int AscISR(ASC_DVC_VAR *asc_dvc)
 	if (chipstat & CSW_SCSI_RESET_LATCH) {
 		if (!(asc_dvc->bus_type & (ASC_IS_VL | ASC_IS_EISA))) {
 			int i = 10;
-			int_pending = TRUE;
+			int_pending = ASC_TRUE;
 			asc_dvc->sdtr_done = 0;
 			saved_ctrl_reg &= (uchar)(~CC_HALT);
 			while ((AscGetChipStatus(iop_base) &
@@ -7308,7 +7305,7 @@ static int AscISR(ASC_DVC_VAR *asc_dvc)
 			 (uchar)(host_flag | (uchar)ASC_HOST_FLAG_IN_ISR));
 	if ((chipstat & CSW_INT_PENDING) || (int_pending)) {
 		AscAckInterrupt(iop_base);
-		int_pending = TRUE;
+		int_pending = ASC_TRUE;
 		if ((chipstat & CSW_HALTED) && (ctrl_reg & CC_SINGLE_STEP)) {
 			if (AscIsrChipHalted(asc_dvc) == ERR) {
 				goto ISR_REPORT_QDONE_FATAL_ERROR;
@@ -7330,13 +7327,13 @@ static int AscISR(ASC_DVC_VAR *asc_dvc)
 				} while (status == 0x11);
 			}
 			if ((status & 0x80) != 0)
-				int_pending = ERR;
+				int_pending = ASC_ERROR;
 		}
 	}
 	AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B, host_flag);
 	AscSetChipLramAddr(iop_base, saved_ram_addr);
 	AscSetChipControl(iop_base, saved_ctrl_reg);
-	asc_dvc->is_in_int = FALSE;
+	asc_dvc->is_in_int = false;
 	return int_pending;
 }
 
@@ -8423,7 +8420,7 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
 	PortAddr iop_base;
 	int sta;
 	int n_q_required;
-	int disable_syn_offset_one_fix;
+	bool disable_syn_offset_one_fix;
 	int i;
 	u32 addr;
 	ushort sg_entry_cnt = 0;
@@ -8488,7 +8485,7 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
 		sg_entry_cnt_minus_one = sg_entry_cnt - 1;
 	}
 	scsi_cmd = scsiq->cdbptr[0];
-	disable_syn_offset_one_fix = FALSE;
+	disable_syn_offset_one_fix = false;
 	if ((asc_dvc->pci_fix_asyn_xfer & scsiq->q1.target_id) &&
 	    !(asc_dvc->pci_fix_asyn_xfer_always & scsiq->q1.target_id)) {
 		if (scsiq->q1.cntl & QC_SG_HEAD) {
@@ -8502,7 +8499,7 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
 		}
 		if (data_cnt != 0UL) {
 			if (data_cnt < 512UL) {
-				disable_syn_offset_one_fix = TRUE;
+				disable_syn_offset_one_fix = true;
 			} else {
 				for (i = 0; i < ASC_SYN_OFFSET_ONE_DISABLE_LIST;
 				     i++) {
@@ -8513,7 +8510,7 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
 					}
 					if (scsi_cmd == disable_cmd) {
 						disable_syn_offset_one_fix =
-						    TRUE;
+						    true;
 						break;
 					}
 				}
@@ -9058,7 +9055,7 @@ static ushort AscInitAscDvcVar(ASC_DVC_VAR *asc_dvc)
 	/* asc_dvc->init_state initialized in AscInitGetConfig(). */
 	asc_dvc->sdtr_done = 0;
 	asc_dvc->cur_total_qng = 0;
-	asc_dvc->is_in_int = 0;
+	asc_dvc->is_in_int = false;
 	asc_dvc->in_critical_cnt = 0;
 	asc_dvc->last_q_shortage = 0;
 	asc_dvc->use_tagged_qng = 0;
@@ -9238,7 +9235,7 @@ static int AscWriteEEPDataReg(PortAddr iop_base, ushort data_reg)
 	int retry;
 
 	retry = 0;
-	while (TRUE) {
+	while (true) {
 		AscSetChipEEPData(iop_base, data_reg);
 		mdelay(1);
 		read_back = AscGetChipEEPData(iop_base);
@@ -9374,7 +9371,7 @@ static int AscSetEEPConfig(PortAddr iop_base, ASCEEP_CONFIG *cfg_buf,
 	int n_error;
 
 	retry = 0;
-	while (TRUE) {
+	while (true) {
 		if ((n_error = AscSetEEPConfigOnce(iop_base, cfg_buf,
 						   bus_type)) == 0) {
 			break;
@@ -9401,7 +9398,7 @@ static ushort AscInitFromEEP(ASC_DVC_VAR *asc_dvc)
 	warn_code = 0;
 	AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0x00FE);
 	AscStopQueueExe(iop_base);
-	if ((AscStopChip(iop_base) == FALSE) ||
+	if ((AscStopChip(iop_base)) ||
 	    (AscGetChipScsiCtrl(iop_base) != 0)) {
 		asc_dvc->init_state |= ASC_INIT_RESET_SCSI_DONE;
 		AscResetChipAndScsiBus(asc_dvc);
@@ -11093,7 +11090,7 @@ static struct scsi_host_template advansys_template = {
 	 * must be set. The flag will be cleared in advansys_board_found
 	 * for non-ISA adapters.
 	 */
-	.unchecked_isa_dma = 1,
+	.unchecked_isa_dma = true,
 	/*
 	 * All adapters controlled by this driver are capable of large
 	 * scatter-gather lists. According to the mid-level SCSI documentation
@@ -11269,28 +11266,28 @@ static int advansys_board_found(struct Scsi_Host *shost, unsigned int iop,
 		switch (asc_dvc_varp->bus_type) {
 #ifdef CONFIG_ISA
 		case ASC_IS_ISA:
-			shost->unchecked_isa_dma = TRUE;
+			shost->unchecked_isa_dma = true;
 			share_irq = 0;
 			break;
 		case ASC_IS_VL:
-			shost->unchecked_isa_dma = FALSE;
+			shost->unchecked_isa_dma = false;
 			share_irq = 0;
 			break;
 		case ASC_IS_EISA:
-			shost->unchecked_isa_dma = FALSE;
+			shost->unchecked_isa_dma = false;
 			share_irq = IRQF_SHARED;
 			break;
 #endif /* CONFIG_ISA */
 #ifdef CONFIG_PCI
 		case ASC_IS_PCI:
-			shost->unchecked_isa_dma = FALSE;
+			shost->unchecked_isa_dma = false;
 			share_irq = IRQF_SHARED;
 			break;
 #endif /* CONFIG_PCI */
 		default:
 			shost_printk(KERN_ERR, shost, "unknown adapter type: "
 					"%d\n", asc_dvc_varp->bus_type);
-			shost->unchecked_isa_dma = TRUE;
+			shost->unchecked_isa_dma = false;
 			share_irq = 0;
 			break;
 		}
@@ -11309,7 +11306,7 @@ static int advansys_board_found(struct Scsi_Host *shost, unsigned int iop,
 		 * For Wide boards set PCI information before calling
 		 * AdvInitGetConfig().
 		 */
-		shost->unchecked_isa_dma = FALSE;
+		shost->unchecked_isa_dma = false;
 		share_irq = IRQF_SHARED;
 		ASC_DBG(2, "AdvInitGetConfig()\n");
 
-- 
1.8.5.2


  parent reply	other threads:[~2015-04-24 11:18 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-24 11:18 [PATCHv3 00/23] Nobody loves the advansys driver Hannes Reinecke
2015-04-24 11:18 ` [PATCH 1/2] advansys: Update to version 3.5 and remove compilation warning Hannes Reinecke
2015-04-24 11:19   ` Hannes Reinecke
2015-04-24 11:18 ` [PATCH 01/23] advansys: use host_reset Hannes Reinecke
2015-04-24 11:18 ` [PATCH 02/23] advansys: use shared host tag map for command lookup Hannes Reinecke
2015-04-24 11:18 ` [PATCH 03/23] advansys: use DMA-API for mapping sense buffer Hannes Reinecke
2015-04-24 11:18 ` [PATCH 04/23] advansys: Use DMA-API for carrier buffer Hannes Reinecke
2015-04-24 11:18 ` [PATCH 05/23] advansys: Use DMA-API for mapping request blocks Hannes Reinecke
2015-04-24 11:18 ` [PATCH 06/23] advansys: Use dma_pool for sg elements Hannes Reinecke
2015-04-24 11:18 ` [PATCH 07/23] advansys: use 'bool' instead of 'int' Hannes Reinecke
2015-04-24 11:18 ` [PATCH 08/23] advansys: use standard data types Hannes Reinecke
2015-04-24 11:18 ` Hannes Reinecke [this message]
2015-04-24 11:18 ` [PATCH 10/23] advansys: remove 'ERR' definition Hannes Reinecke
2015-04-24 11:18 ` [PATCH 11/23] advansys: Make AscIsrChipHalted() a void function Hannes Reinecke
2015-04-24 11:18 ` [PATCH 12/23] advansys: cleanup function return codes Hannes Reinecke
2015-04-24 11:18 ` [PATCH 13/23] advansys: scsi_q1->data_addr is little endian Hannes Reinecke
2015-04-24 11:18 ` [PATCH 14/23] advansys: Remove ASC_SCSI_REQ_Q Hannes Reinecke
2015-04-24 11:18 ` [PATCH 15/23] advansys: Remove CC_VERY_LONG_SG_LIST Hannes Reinecke
2015-04-24 11:18 ` [PATCH 16/23] advansys: rename 'ASC_RQ_XX' to 'ADV_RQ_XX' Hannes Reinecke
2015-04-24 11:18 ` [PATCH 17/23] advansys: Remove 'a_flag' Hannes Reinecke
2015-04-24 11:18 ` [PATCH 18/23] advansys: Remove obsolete virtual memory mapping comment Hannes Reinecke
2015-04-24 11:18 ` [PATCH 19/23] advansys: Remove cmd_per_lun setting Hannes Reinecke
2015-04-26 14:57   ` Ondrej Zary
2015-04-26 16:55     ` Christoph Hellwig
2015-04-26 18:23       ` Ondrej Zary
2015-04-26 18:52     ` James Bottomley
2015-04-27  7:02       ` Hannes Reinecke
2015-04-28 21:15         ` James Bottomley
2015-04-24 11:18 ` [PATCH 20/23] advansys: Check for DMA mapping errors Hannes Reinecke
2015-04-24 11:18 ` [PATCH 21/23] advansys: use spin_lock_irqsave() in interrupt handler Hannes Reinecke
2015-04-24 11:18 ` [PATCH 22/23] advansys: Remove call to dma_cache_sync() Hannes Reinecke
2015-04-24 11:18 ` [PATCH 23/23] advansys: Update to version 3.5 and remove compilation warning Hannes Reinecke

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1429874322-85488-11-git-send-email-hare@suse.de \
    --to=hare@suse.de \
    --cc=dgilbert@interlog.com \
    --cc=hch@lst.de \
    --cc=jbottomley@parallels.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=linux@rainbow-software.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.