[rtc-linux] [PATCH v2 0/4] SA1100 RTC clean-up for ARM64

[rtc-linux] [PATCH v2 0/4] SA1100 RTC clean-up for ARM64

[Rob Herring]

This series enables building the SA1100 RTC driver for ARM64 in
preparation for enabling CONFIG_ARCH_MMP on ARM64. This is needed for
supporting the PXA1928 SOC.

The previous version can be found here[1]. This is mostly an update to
summarize the discussion about SA1100 and PXA RTC support.

Rob

[1] http://comments.gmane.org/gmane.linux.ports.arm.kernel/391410

Rob Herring (4):
  ARM: pxa: add memory resource to RTC device
  rtc: sa1100: convert to run-time register mapping
  ARM: sa1100: remove unused RTC register definitions
  ARM: mmp: remove unused RTC register definitions

 arch/arm/mach-mmp/include/mach/regs-rtc.h   | 23 --------
 arch/arm/mach-pxa/devices.c                 | 18 +-----
 arch/arm/mach-sa1100/include/mach/SA-1100.h | 34 ------------
 drivers/rtc/rtc-sa1100.c                    | 86 ++++++++++++++++++++---------
 4 files changed, 61 insertions(+), 100 deletions(-)
 delete mode 100644 arch/arm/mach-mmp/include/mach/regs-rtc.h

--
2.1.0

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[PATCH v2 0/4] SA1100 RTC clean-up for ARM64

[Rob Herring]

This series enables building the SA1100 RTC driver for ARM64 in
preparation for enabling CONFIG_ARCH_MMP on ARM64. This is needed for
supporting the PXA1928 SOC.

The previous version can be found here[1]. This is mostly an update to
summarize the discussion about SA1100 and PXA RTC support.

Rob

[1] http://comments.gmane.org/gmane.linux.ports.arm.kernel/391410

Rob Herring (4):
  ARM: pxa: add memory resource to RTC device
  rtc: sa1100: convert to run-time register mapping
  ARM: sa1100: remove unused RTC register definitions
  ARM: mmp: remove unused RTC register definitions

 arch/arm/mach-mmp/include/mach/regs-rtc.h   | 23 --------
 arch/arm/mach-pxa/devices.c                 | 18 +-----
 arch/arm/mach-sa1100/include/mach/SA-1100.h | 34 ------------
 drivers/rtc/rtc-sa1100.c                    | 86 ++++++++++++++++++++---------
 4 files changed, 61 insertions(+), 100 deletions(-)
 delete mode 100644 arch/arm/mach-mmp/include/mach/regs-rtc.h

--
2.1.0

[rtc-linux] [PATCH v2 1/4] ARM: pxa: add memory resource to RTC device

[Rob Herring]

Add the memory resource for the sa1100-rtc device. Since the memory
resource is already present in the pxa_rtc_resources, that makes
sa1100_rtc_resources and pxa_rtc_resources equivalent, so use
pxa_rtc_resources for both devices and remove the duplicate
sa1100_rtc_resources.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
---
v2:
- Rebase to v4.1-rc1

 arch/arm/mach-pxa/devices.c | 18 ++----------------
 1 file changed, 2 insertions(+), 16 deletions(-)

diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 3543466..b598db6 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -439,25 +439,11 @@ struct platform_device pxa_device_rtc = {
 	.resource       = pxa_rtc_resources,
 };

-static struct resource sa1100_rtc_resources[] = {
-	{
-		.start  = IRQ_RTC1Hz,
-		.end    = IRQ_RTC1Hz,
-		.name	= "rtc 1Hz",
-		.flags  = IORESOURCE_IRQ,
-	}, {
-		.start  = IRQ_RTCAlrm,
-		.end    = IRQ_RTCAlrm,
-		.name	= "rtc alarm",
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
 struct platform_device sa1100_device_rtc = {
 	.name		= "sa1100-rtc",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sa1100_rtc_resources),
-	.resource	= sa1100_rtc_resources,
+	.num_resources  = ARRAY_SIZE(pxa_rtc_resources),
+	.resource       = pxa_rtc_resources,
 };

 static struct resource pxa_ac97_resources[] = {
--
2.1.0

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[PATCH v2 1/4] ARM: pxa: add memory resource to RTC device

[Rob Herring]

Add the memory resource for the sa1100-rtc device. Since the memory
resource is already present in the pxa_rtc_resources, that makes
sa1100_rtc_resources and pxa_rtc_resources equivalent, so use
pxa_rtc_resources for both devices and remove the duplicate
sa1100_rtc_resources.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel at lists.infradead.org
---
v2:
- Rebase to v4.1-rc1

 arch/arm/mach-pxa/devices.c | 18 ++----------------
 1 file changed, 2 insertions(+), 16 deletions(-)

diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 3543466..b598db6 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -439,25 +439,11 @@ struct platform_device pxa_device_rtc = {
 	.resource       = pxa_rtc_resources,
 };

-static struct resource sa1100_rtc_resources[] = {
-	{
-		.start  = IRQ_RTC1Hz,
-		.end    = IRQ_RTC1Hz,
-		.name	= "rtc 1Hz",
-		.flags  = IORESOURCE_IRQ,
-	}, {
-		.start  = IRQ_RTCAlrm,
-		.end    = IRQ_RTCAlrm,
-		.name	= "rtc alarm",
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
 struct platform_device sa1100_device_rtc = {
 	.name		= "sa1100-rtc",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sa1100_rtc_resources),
-	.resource	= sa1100_rtc_resources,
+	.num_resources  = ARRAY_SIZE(pxa_rtc_resources),
+	.resource       = pxa_rtc_resources,
 };

 static struct resource pxa_ac97_resources[] = {
--
2.1.0

[rtc-linux] Re: [PATCH v2 1/4] ARM: pxa: add memory resource to RTC device

[Robert Jarzmik]

Rob Herring <robh@kernel.org> writes:

> Add the memory resource for the sa1100-rtc device. Since the memory
> resource is already present in the pxa_rtc_resources, that makes
> sa1100_rtc_resources and pxa_rtc_resources equivalent, so use
> pxa_rtc_resources for both devices and remove the duplicate
> sa1100_rtc_resources.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> Cc: Daniel Mack <daniel@zonque.org>
> Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
> Cc: Robert Jarzmik <robert.jarzmik@free.fr>
> Cc: Russell King <linux@arm.linux.org.uk>
> Cc: linux-arm-kernel@lists.infradead.org
> ---
> v2:
> - Rebase to v4.1-rc1
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>

-- 
Robert

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[PATCH v2 1/4] ARM: pxa: add memory resource to RTC device

[Robert Jarzmik]

Rob Herring <robh@kernel.org> writes:

> Add the memory resource for the sa1100-rtc device. Since the memory
> resource is already present in the pxa_rtc_resources, that makes
> sa1100_rtc_resources and pxa_rtc_resources equivalent, so use
> pxa_rtc_resources for both devices and remove the duplicate
> sa1100_rtc_resources.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> Cc: Daniel Mack <daniel@zonque.org>
> Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
> Cc: Robert Jarzmik <robert.jarzmik@free.fr>
> Cc: Russell King <linux@arm.linux.org.uk>
> Cc: linux-arm-kernel at lists.infradead.org
> ---
> v2:
> - Rebase to v4.1-rc1
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>

-- 
Robert

[rtc-linux] [PATCH v2 2/4] rtc: sa1100: convert to run-time register mapping

[Rob Herring]

SA1100 and PXA differ only in register offsets which are currently
hardcoded in a machine specific header. Some arm64 platforms (PXA1928)
have this RTC block as well (and not the PXA270 variant).

Convert the driver to use ioremap and set the register offsets dynamically.
Since we are touching all the register accesses, convert them all to
readl_relaxed/writel_relaxed.

Currently, the rtc-sa1100 and rtc-pxa drivers co-exist as rtc-pxa has a
superset of functionality. This commit makes the drivers one step closer
to being mutually exclusive by using devm_ioremap_resource and claiming
the resource. The sharing of overlapping resources does not work if both
drivers claim the resource. That is not done currently, but will be done
as the drivers are converted to DT and follow proper driver rules.
Likely, the common portion of the 2 drivers will be made into library
functions for the SA1100 and PXA drivers to shared.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: rtc-linux@googlegroups.com
---
v2:
- Rebase to v4.1-rc1
- Use _relaxed accessors
- Summarize discussion about supporting both SA1100 and PXA RTC drivers

 drivers/rtc/rtc-sa1100.c | 86 +++++++++++++++++++++++++++++++++---------------
 1 file changed, 59 insertions(+), 27 deletions(-)

diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index b6e1ca0..a21ead5 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -35,12 +35,10 @@
 #include <linux/bitops.h>
 #include <linux/io.h>

-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
-#include <mach/regs-rtc.h>
-#endif
+#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
+#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
+#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
+#define RTSR_AL		(1 << 0)	/* RTC alarm detected */

 #define RTC_DEF_DIVIDER		(32768 - 1)
 #define RTC_DEF_TRIM		0
@@ -48,6 +46,10 @@

 struct sa1100_rtc {
 	spinlock_t		lock;
+	void __iomem		*rcnr;
+	void __iomem		*rtar;
+	void __iomem		*rtsr;
+	void __iomem		*rttr;
 	int			irq_1hz;
 	int			irq_alarm;
 	struct rtc_device	*rtc;
@@ -63,16 +65,16 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)

 	spin_lock(&info->lock);

-	rtsr = RTSR;
+	rtsr = readl_relaxed(info->rtsr);
 	/* clear interrupt sources */
-	RTSR = 0;
+	writel_relaxed(0, info->rtsr);
 	/* Fix for a nasty initialization problem the in SA11xx RTSR register.
 	 * See also the comments in sa1100_rtc_probe(). */
 	if (rtsr & (RTSR_ALE | RTSR_HZE)) {
 		/* This is the original code, before there was the if test
 		 * above. This code does not clear interrupts that were not
 		 * enabled. */
-		RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2);
+		writel_relaxed((RTSR_AL | RTSR_HZ) & (rtsr >> 2), info->rtsr);
 	} else {
 		/* For some reason, it is possible to enter this routine
 		 * without interruptions enabled, it has been tested with
@@ -81,13 +83,13 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
 		 * This situation leads to an infinite "loop" of interrupt
 		 * routine calling and as a result the processor seems to
 		 * lock on its first call to open(). */
-		RTSR = RTSR_AL | RTSR_HZ;
+		writel_relaxed(RTSR_AL | RTSR_HZ, info->rtsr);
 	}

 	/* clear alarm interrupt if it has occurred */
 	if (rtsr & RTSR_AL)
 		rtsr &= ~RTSR_ALE;
-	RTSR = rtsr & (RTSR_ALE | RTSR_HZE);
+	writel_relaxed(rtsr & (RTSR_ALE | RTSR_HZE), info->rtsr);

 	/* update irq data & counter */
 	if (rtsr & RTSR_AL)
@@ -135,7 +137,7 @@ static void sa1100_rtc_release(struct device *dev)
 	struct sa1100_rtc *info = dev_get_drvdata(dev);

 	spin_lock_irq(&info->lock);
-	RTSR = 0;
+	writel_relaxed(0, info->rtsr);
 	spin_unlock_irq(&info->lock);

 	free_irq(info->irq_alarm, dev);
@@ -144,39 +146,45 @@ static void sa1100_rtc_release(struct device *dev)

 static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
 {
+	u32 rtsr;
 	struct sa1100_rtc *info = dev_get_drvdata(dev);

 	spin_lock_irq(&info->lock);
+	rtsr = readl_relaxed(info->rtsr);
 	if (enabled)
-		RTSR |= RTSR_ALE;
+		rtsr |= RTSR_ALE;
 	else
-		RTSR &= ~RTSR_ALE;
+		rtsr &= ~RTSR_ALE;
+	writel_relaxed(rtsr, info->rtsr);
 	spin_unlock_irq(&info->lock);
 	return 0;
 }

 static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	rtc_time_to_tm(RCNR, tm);
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
+	rtc_time_to_tm(readl_relaxed(info->rcnr), tm);
 	return 0;
 }

 static int sa1100_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
 	unsigned long time;
 	int ret;

 	ret = rtc_tm_to_time(tm, &time);
 	if (ret == 0)
-		RCNR = time;
+		writel_relaxed(time, info->rcnr);
 	return ret;
 }

 static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
 	u32	rtsr;
+	struct sa1100_rtc *info = dev_get_drvdata(dev);

-	rtsr = RTSR;
+	rtsr = readl_relaxed(info->rtsr);
 	alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0;
 	alrm->pending = (rtsr & RTSR_AL) ? 1 : 0;
 	return 0;
@@ -192,12 +200,13 @@ static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	ret = rtc_tm_to_time(&alrm->time, &time);
 	if (ret != 0)
 		goto out;
-	RTSR = RTSR & (RTSR_HZE|RTSR_ALE|RTSR_AL);
-	RTAR = time;
+	writel_relaxed(readl_relaxed(info->rtsr) &
+		(RTSR_HZE | RTSR_ALE | RTSR_AL), info->rtsr);
+	writel_relaxed(time, info->rtar);
 	if (alrm->enabled)
-		RTSR |= RTSR_ALE;
+		writel_relaxed(readl_relaxed(info->rtsr) | RTSR_ALE, info->rtsr);
 	else
-		RTSR &= ~RTSR_ALE;
+		writel_relaxed(readl_relaxed(info->rtsr) & ~RTSR_ALE, info->rtsr);
 out:
 	spin_unlock_irq(&info->lock);

@@ -206,8 +215,9 @@ out:

 static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
 {
-	seq_printf(seq, "trim/divider\t\t: 0x%08x\n", (u32) RTTR);
-	seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", (u32)RTSR);
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
+	seq_printf(seq, "trim/divider\t\t: 0x%08x\n", readl_relaxed(info->rttr));
+	seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", readl_relaxed(info->rtsr));

 	return 0;
 }
@@ -227,6 +237,8 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
 {
 	struct rtc_device *rtc;
 	struct sa1100_rtc *info;
+	struct resource *iores;
+	void __iomem *base;
 	int irq_1hz, irq_alarm, ret = 0;

 	irq_1hz = platform_get_irq_byname(pdev, "rtc 1Hz");
@@ -244,6 +256,26 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
 	}
 	info->irq_1hz = irq_1hz;
 	info->irq_alarm = irq_alarm;
+
+
+	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, iores);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	if (IS_ENABLED(CONFIG_ARCH_SA1100) ||
+	    of_device_is_compatible(pdev->dev.of_node, "mrvl,sa1100-rtc")) {
+		info->rcnr = base + 0x04;
+		info->rtsr = base + 0x10;
+		info->rtar = base + 0x00;
+		info->rttr = base + 0x08;
+	} else {
+		info->rcnr = base + 0x0;
+		info->rtsr = base + 0x8;
+		info->rtar = base + 0x4;
+		info->rttr = base + 0xc;
+	}
+
 	spin_lock_init(&info->lock);
 	platform_set_drvdata(pdev, info);

@@ -257,12 +289,12 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
 	 * If the clock divider is uninitialized then reset it to the
 	 * default value to get the 1Hz clock.
 	 */
-	if (RTTR == 0) {
-		RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
+	if (readl_relaxed(info->rttr) == 0) {
+		writel_relaxed(RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16), info->rttr);
 		dev_warn(&pdev->dev, "warning: "
 			"initializing default clock divider/trim value\n");
 		/* The current RTC value probably doesn't make sense either */
-		RCNR = 0;
+		writel_relaxed(0, info->rcnr);
 	}

 	device_init_wakeup(&pdev->dev, 1);
@@ -298,7 +330,7 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
 	 *
 	 * Notice that clearing bit 1 and 0 is accomplished by writting ONES to
 	 * the corresponding bits in RTSR. */
-	RTSR = RTSR_AL | RTSR_HZ;
+	writel_relaxed(RTSR_AL | RTSR_HZ, info->rtsr);

 	return 0;
 err_dev:
--
2.1.0

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[PATCH v2 2/4] rtc: sa1100: convert to run-time register mapping

[Rob Herring]

SA1100 and PXA differ only in register offsets which are currently
hardcoded in a machine specific header. Some arm64 platforms (PXA1928)
have this RTC block as well (and not the PXA270 variant).

Convert the driver to use ioremap and set the register offsets dynamically.
Since we are touching all the register accesses, convert them all to
readl_relaxed/writel_relaxed.

Currently, the rtc-sa1100 and rtc-pxa drivers co-exist as rtc-pxa has a
superset of functionality. This commit makes the drivers one step closer
to being mutually exclusive by using devm_ioremap_resource and claiming
the resource. The sharing of overlapping resources does not work if both
drivers claim the resource. That is not done currently, but will be done
as the drivers are converted to DT and follow proper driver rules.
Likely, the common portion of the 2 drivers will be made into library
functions for the SA1100 and PXA drivers to shared.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: rtc-linux at googlegroups.com
---
v2:
- Rebase to v4.1-rc1
- Use _relaxed accessors
- Summarize discussion about supporting both SA1100 and PXA RTC drivers

 drivers/rtc/rtc-sa1100.c | 86 +++++++++++++++++++++++++++++++++---------------
 1 file changed, 59 insertions(+), 27 deletions(-)

diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index b6e1ca0..a21ead5 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -35,12 +35,10 @@
 #include <linux/bitops.h>
 #include <linux/io.h>

-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
-#include <mach/regs-rtc.h>
-#endif
+#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
+#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
+#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
+#define RTSR_AL		(1 << 0)	/* RTC alarm detected */

 #define RTC_DEF_DIVIDER		(32768 - 1)
 #define RTC_DEF_TRIM		0
@@ -48,6 +46,10 @@

 struct sa1100_rtc {
 	spinlock_t		lock;
+	void __iomem		*rcnr;
+	void __iomem		*rtar;
+	void __iomem		*rtsr;
+	void __iomem		*rttr;
 	int			irq_1hz;
 	int			irq_alarm;
 	struct rtc_device	*rtc;
@@ -63,16 +65,16 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)

 	spin_lock(&info->lock);

-	rtsr = RTSR;
+	rtsr = readl_relaxed(info->rtsr);
 	/* clear interrupt sources */
-	RTSR = 0;
+	writel_relaxed(0, info->rtsr);
 	/* Fix for a nasty initialization problem the in SA11xx RTSR register.
 	 * See also the comments in sa1100_rtc_probe(). */
 	if (rtsr & (RTSR_ALE | RTSR_HZE)) {
 		/* This is the original code, before there was the if test
 		 * above. This code does not clear interrupts that were not
 		 * enabled. */
-		RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2);
+		writel_relaxed((RTSR_AL | RTSR_HZ) & (rtsr >> 2), info->rtsr);
 	} else {
 		/* For some reason, it is possible to enter this routine
 		 * without interruptions enabled, it has been tested with
@@ -81,13 +83,13 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
 		 * This situation leads to an infinite "loop" of interrupt
 		 * routine calling and as a result the processor seems to
 		 * lock on its first call to open(). */
-		RTSR = RTSR_AL | RTSR_HZ;
+		writel_relaxed(RTSR_AL | RTSR_HZ, info->rtsr);
 	}

 	/* clear alarm interrupt if it has occurred */
 	if (rtsr & RTSR_AL)
 		rtsr &= ~RTSR_ALE;
-	RTSR = rtsr & (RTSR_ALE | RTSR_HZE);
+	writel_relaxed(rtsr & (RTSR_ALE | RTSR_HZE), info->rtsr);

 	/* update irq data & counter */
 	if (rtsr & RTSR_AL)
@@ -135,7 +137,7 @@ static void sa1100_rtc_release(struct device *dev)
 	struct sa1100_rtc *info = dev_get_drvdata(dev);

 	spin_lock_irq(&info->lock);
-	RTSR = 0;
+	writel_relaxed(0, info->rtsr);
 	spin_unlock_irq(&info->lock);

 	free_irq(info->irq_alarm, dev);
@@ -144,39 +146,45 @@ static void sa1100_rtc_release(struct device *dev)

 static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
 {
+	u32 rtsr;
 	struct sa1100_rtc *info = dev_get_drvdata(dev);

 	spin_lock_irq(&info->lock);
+	rtsr = readl_relaxed(info->rtsr);
 	if (enabled)
-		RTSR |= RTSR_ALE;
+		rtsr |= RTSR_ALE;
 	else
-		RTSR &= ~RTSR_ALE;
+		rtsr &= ~RTSR_ALE;
+	writel_relaxed(rtsr, info->rtsr);
 	spin_unlock_irq(&info->lock);
 	return 0;
 }

 static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	rtc_time_to_tm(RCNR, tm);
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
+	rtc_time_to_tm(readl_relaxed(info->rcnr), tm);
 	return 0;
 }

 static int sa1100_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
 	unsigned long time;
 	int ret;

 	ret = rtc_tm_to_time(tm, &time);
 	if (ret == 0)
-		RCNR = time;
+		writel_relaxed(time, info->rcnr);
 	return ret;
 }

 static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
 	u32	rtsr;
+	struct sa1100_rtc *info = dev_get_drvdata(dev);

-	rtsr = RTSR;
+	rtsr = readl_relaxed(info->rtsr);
 	alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0;
 	alrm->pending = (rtsr & RTSR_AL) ? 1 : 0;
 	return 0;
@@ -192,12 +200,13 @@ static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	ret = rtc_tm_to_time(&alrm->time, &time);
 	if (ret != 0)
 		goto out;
-	RTSR = RTSR & (RTSR_HZE|RTSR_ALE|RTSR_AL);
-	RTAR = time;
+	writel_relaxed(readl_relaxed(info->rtsr) &
+		(RTSR_HZE | RTSR_ALE | RTSR_AL), info->rtsr);
+	writel_relaxed(time, info->rtar);
 	if (alrm->enabled)
-		RTSR |= RTSR_ALE;
+		writel_relaxed(readl_relaxed(info->rtsr) | RTSR_ALE, info->rtsr);
 	else
-		RTSR &= ~RTSR_ALE;
+		writel_relaxed(readl_relaxed(info->rtsr) & ~RTSR_ALE, info->rtsr);
 out:
 	spin_unlock_irq(&info->lock);

@@ -206,8 +215,9 @@ out:

 static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
 {
-	seq_printf(seq, "trim/divider\t\t: 0x%08x\n", (u32) RTTR);
-	seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", (u32)RTSR);
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
+	seq_printf(seq, "trim/divider\t\t: 0x%08x\n", readl_relaxed(info->rttr));
+	seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", readl_relaxed(info->rtsr));

 	return 0;
 }
@@ -227,6 +237,8 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
 {
 	struct rtc_device *rtc;
 	struct sa1100_rtc *info;
+	struct resource *iores;
+	void __iomem *base;
 	int irq_1hz, irq_alarm, ret = 0;

 	irq_1hz = platform_get_irq_byname(pdev, "rtc 1Hz");
@@ -244,6 +256,26 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
 	}
 	info->irq_1hz = irq_1hz;
 	info->irq_alarm = irq_alarm;
+
+
+	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, iores);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	if (IS_ENABLED(CONFIG_ARCH_SA1100) ||
+	    of_device_is_compatible(pdev->dev.of_node, "mrvl,sa1100-rtc")) {
+		info->rcnr = base + 0x04;
+		info->rtsr = base + 0x10;
+		info->rtar = base + 0x00;
+		info->rttr = base + 0x08;
+	} else {
+		info->rcnr = base + 0x0;
+		info->rtsr = base + 0x8;
+		info->rtar = base + 0x4;
+		info->rttr = base + 0xc;
+	}
+
 	spin_lock_init(&info->lock);
 	platform_set_drvdata(pdev, info);

@@ -257,12 +289,12 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
 	 * If the clock divider is uninitialized then reset it to the
 	 * default value to get the 1Hz clock.
 	 */
-	if (RTTR == 0) {
-		RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
+	if (readl_relaxed(info->rttr) == 0) {
+		writel_relaxed(RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16), info->rttr);
 		dev_warn(&pdev->dev, "warning: "
 			"initializing default clock divider/trim value\n");
 		/* The current RTC value probably doesn't make sense either */
-		RCNR = 0;
+		writel_relaxed(0, info->rcnr);
 	}

 	device_init_wakeup(&pdev->dev, 1);
@@ -298,7 +330,7 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
 	 *
 	 * Notice that clearing bit 1 and 0 is accomplished by writting ONES to
 	 * the corresponding bits in RTSR. */
-	RTSR = RTSR_AL | RTSR_HZ;
+	writel_relaxed(RTSR_AL | RTSR_HZ, info->rtsr);

 	return 0;
 err_dev:
--
2.1.0

[rtc-linux] Re: [PATCH v2 2/4] rtc: sa1100: convert to run-time register mapping

[Robert Jarzmik]

Rob Herring <robh@kernel.org> writes:

>  static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
>  {
> -	rtc_time_to_tm(RCNR, tm);
> +	struct sa1100_rtc *info = dev_get_drvdata(dev);
> +	rtc_time_to_tm(readl_relaxed(info->rcnr), tm);
One nitpick here : an empty line between info declaration and code would be
better..

> @@ -206,8 +215,9 @@ out:
>
>  static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
>  {
> -	seq_printf(seq, "trim/divider\t\t: 0x%08x\n", (u32) RTTR);
> -	seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", (u32)RTSR);
> +	struct sa1100_rtc *info = dev_get_drvdata(dev);
> +	seq_printf(seq, "trim/divider\t\t: 0x%08x\n", readl_relaxed(info->rttr));
> +	seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", readl_relaxed(info->rtsr));
Ditto.

> @@ -244,6 +256,26 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
>  	}
>  	info->irq_1hz = irq_1hz;
>  	info->irq_alarm = irq_alarm;
> +
> +
Ah here the is one too much. Too bad I had not caught it the first time.

With these 3 small details, you can add my :
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>

Cheers.

-- 
Robert

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[PATCH v2 2/4] rtc: sa1100: convert to run-time register mapping

[Robert Jarzmik]

Rob Herring <robh@kernel.org> writes:

>  static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
>  {
> -	rtc_time_to_tm(RCNR, tm);
> +	struct sa1100_rtc *info = dev_get_drvdata(dev);
> +	rtc_time_to_tm(readl_relaxed(info->rcnr), tm);
One nitpick here : an empty line between info declaration and code would be
better..

> @@ -206,8 +215,9 @@ out:
>
>  static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
>  {
> -	seq_printf(seq, "trim/divider\t\t: 0x%08x\n", (u32) RTTR);
> -	seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", (u32)RTSR);
> +	struct sa1100_rtc *info = dev_get_drvdata(dev);
> +	seq_printf(seq, "trim/divider\t\t: 0x%08x\n", readl_relaxed(info->rttr));
> +	seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", readl_relaxed(info->rtsr));
Ditto.

> @@ -244,6 +256,26 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
>  	}
>  	info->irq_1hz = irq_1hz;
>  	info->irq_alarm = irq_alarm;
> +
> +
Ah here the is one too much. Too bad I had not caught it the first time.

With these 3 small details, you can add my :
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>

Cheers.

-- 
Robert

Re: [rtc-linux] Re: [PATCH v2 2/4] rtc: sa1100: convert to run-time register mapping

[Alexandre Belloni]

On 01/05/2015 at 18:13:48 +0200, Robert Jarzmik wrote :
> Rob Herring <robh@kernel.org> writes:
> 
> >  static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
> >  {
> > -	rtc_time_to_tm(RCNR, tm);
> > +	struct sa1100_rtc *info = dev_get_drvdata(dev);
> > +	rtc_time_to_tm(readl_relaxed(info->rcnr), tm);
> One nitpick here : an empty line between info declaration and code would be
> better..
> 
> > @@ -206,8 +215,9 @@ out:
> >
> >  static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
> >  {
> > -	seq_printf(seq, "trim/divider\t\t: 0x%08x\n", (u32) RTTR);
> > -	seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", (u32)RTSR);
> > +	struct sa1100_rtc *info = dev_get_drvdata(dev);
> > +	seq_printf(seq, "trim/divider\t\t: 0x%08x\n", readl_relaxed(info->rttr));
> > +	seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", readl_relaxed(info->rtsr));
> Ditto.
> 
> > @@ -244,6 +256,26 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
> >  	}
> >  	info->irq_1hz = irq_1hz;
> >  	info->irq_alarm = irq_alarm;
> > +
> > +
> Ah here the is one too much. Too bad I had not caught it the first time.
> 

Those are actually reported by checkpatch --strict

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[rtc-linux] Re: [PATCH v2 2/4] rtc: sa1100: convert to run-time register mapping

[Alexandre Belloni]

On 01/05/2015 at 18:13:48 +0200, Robert Jarzmik wrote :
> Rob Herring <robh@kernel.org> writes:
> 
> >  static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
> >  {
> > -	rtc_time_to_tm(RCNR, tm);
> > +	struct sa1100_rtc *info = dev_get_drvdata(dev);
> > +	rtc_time_to_tm(readl_relaxed(info->rcnr), tm);
> One nitpick here : an empty line between info declaration and code would be
> better..
> 
> > @@ -206,8 +215,9 @@ out:
> >
> >  static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
> >  {
> > -	seq_printf(seq, "trim/divider\t\t: 0x%08x\n", (u32) RTTR);
> > -	seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", (u32)RTSR);
> > +	struct sa1100_rtc *info = dev_get_drvdata(dev);
> > +	seq_printf(seq, "trim/divider\t\t: 0x%08x\n", readl_relaxed(info->rttr));
> > +	seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", readl_relaxed(info->rtsr));
> Ditto.
> 
> > @@ -244,6 +256,26 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
> >  	}
> >  	info->irq_1hz = irq_1hz;
> >  	info->irq_alarm = irq_alarm;
> > +
> > +
> Ah here the is one too much. Too bad I had not caught it the first time.
> 

Those are actually reported by checkpatch --strict

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Re: [rtc-linux] [PATCH v2 2/4] rtc: sa1100: convert to run-time register mapping

[Alexandre Belloni]

Hi,

On 30/04/2015 at 15:37:11 -0500, Rob Herring wrote :
> SA1100 and PXA differ only in register offsets which are currently
> hardcoded in a machine specific header. Some arm64 platforms (PXA1928)
> have this RTC block as well (and not the PXA270 variant).
> 
> Convert the driver to use ioremap and set the register offsets dynamically.
> Since we are touching all the register accesses, convert them all to
> readl_relaxed/writel_relaxed.
> 
> Currently, the rtc-sa1100 and rtc-pxa drivers co-exist as rtc-pxa has a
> superset of functionality. This commit makes the drivers one step closer
> to being mutually exclusive by using devm_ioremap_resource and claiming
> the resource. The sharing of overlapping resources does not work if both
> drivers claim the resource. That is not done currently, but will be done
> as the drivers are converted to DT and follow proper driver rules.
> Likely, the common portion of the 2 drivers will be made into library
> functions for the SA1100 and PXA drivers to shared.
> 
> Signed-off-by: Rob Herring <robh@kernel.org>
> Cc: Alessandro Zummo <a.zummo@towertech.it>
> Cc: rtc-linux@googlegroups.com
> ---
> v2:
> - Rebase to v4.1-rc1
> - Use _relaxed accessors
> - Summarize discussion about supporting both SA1100 and PXA RTC drivers
> 
>  drivers/rtc/rtc-sa1100.c | 86 +++++++++++++++++++++++++++++++++---------------
>  1 file changed, 59 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
> index b6e1ca0..a21ead5 100644
> --- a/drivers/rtc/rtc-sa1100.c
> +++ b/drivers/rtc/rtc-sa1100.c
> @@ -35,12 +35,10 @@
>  #include <linux/bitops.h>
>  #include <linux/io.h>
> 
> -#include <mach/hardware.h>
> -#include <mach/irqs.h>
> -
> -#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
> -#include <mach/regs-rtc.h>
> -#endif
> +#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
> +#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
> +#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
> +#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
> 

While at it, can you use BIT()?

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[rtc-linux] [PATCH v2 2/4] rtc: sa1100: convert to run-time register mapping

[Alexandre Belloni]

Hi,

On 30/04/2015 at 15:37:11 -0500, Rob Herring wrote :
> SA1100 and PXA differ only in register offsets which are currently
> hardcoded in a machine specific header. Some arm64 platforms (PXA1928)
> have this RTC block as well (and not the PXA270 variant).
> 
> Convert the driver to use ioremap and set the register offsets dynamically.
> Since we are touching all the register accesses, convert them all to
> readl_relaxed/writel_relaxed.
> 
> Currently, the rtc-sa1100 and rtc-pxa drivers co-exist as rtc-pxa has a
> superset of functionality. This commit makes the drivers one step closer
> to being mutually exclusive by using devm_ioremap_resource and claiming
> the resource. The sharing of overlapping resources does not work if both
> drivers claim the resource. That is not done currently, but will be done
> as the drivers are converted to DT and follow proper driver rules.
> Likely, the common portion of the 2 drivers will be made into library
> functions for the SA1100 and PXA drivers to shared.
> 
> Signed-off-by: Rob Herring <robh@kernel.org>
> Cc: Alessandro Zummo <a.zummo@towertech.it>
> Cc: rtc-linux at googlegroups.com
> ---
> v2:
> - Rebase to v4.1-rc1
> - Use _relaxed accessors
> - Summarize discussion about supporting both SA1100 and PXA RTC drivers
> 
>  drivers/rtc/rtc-sa1100.c | 86 +++++++++++++++++++++++++++++++++---------------
>  1 file changed, 59 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
> index b6e1ca0..a21ead5 100644
> --- a/drivers/rtc/rtc-sa1100.c
> +++ b/drivers/rtc/rtc-sa1100.c
> @@ -35,12 +35,10 @@
>  #include <linux/bitops.h>
>  #include <linux/io.h>
> 
> -#include <mach/hardware.h>
> -#include <mach/irqs.h>
> -
> -#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
> -#include <mach/regs-rtc.h>
> -#endif
> +#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
> +#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
> +#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
> +#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
> 

While at it, can you use BIT()?

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[rtc-linux] [PATCH v2 3/4] ARM: sa1100: remove unused RTC register definitions

[Rob Herring]

Now that register definitions have been moved to the driver, we can remove
them from machine specific code.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
---
v2:
- Rebase to v4.1-rc1

 arch/arm/mach-sa1100/include/mach/SA-1100.h | 34 -----------------------------
 1 file changed, 34 deletions(-)

diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h
index 0ac6cc0..7972617 100644
--- a/arch/arm/mach-sa1100/include/mach/SA-1100.h
+++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h
@@ -858,40 +858,6 @@


 /*
- * Real-Time Clock (RTC) control registers
- *
- * Registers
- *    RTAR      	Real-Time Clock (RTC) Alarm Register (read/write).
- *    RCNR      	Real-Time Clock (RTC) CouNt Register (read/write).
- *    RTTR      	Real-Time Clock (RTC) Trim Register (read/write).
- *    RTSR      	Real-Time Clock (RTC) Status Register (read/write).
- *
- * Clocks
- *    frtx, Trtx	Frequency, period of the real-time clock crystal
- *              	(32.768 kHz nominal).
- *    frtc, Trtc	Frequency, period of the real-time clock counter
- *              	(1 Hz nominal).
- */
-
-#define RTAR		__REG(0x90010000)  /* RTC Alarm Reg. */
-#define RCNR		__REG(0x90010004)  /* RTC CouNt Reg. */
-#define RTTR		__REG(0x90010008)  /* RTC Trim Reg. */
-#define RTSR		__REG(0x90010010)  /* RTC Status Reg. */
-
-#define RTTR_C  	Fld (16, 0)	/* clock divider Count - 1         */
-#define RTTR_D  	Fld (10, 16)	/* trim Delete count               */
-                	        	/* frtc = (1023*(C + 1) - D)*frtx/ */
-                	        	/*        (1023*(C + 1)^2)         */
-                	        	/* Trtc = (1023*(C + 1)^2)*Trtx/   */
-                	        	/*        (1023*(C + 1) - D)       */
-
-#define RTSR_AL 	0x00000001	/* ALarm detected                  */
-#define RTSR_HZ 	0x00000002	/* 1 Hz clock detected             */
-#define RTSR_ALE	0x00000004	/* ALarm interrupt Enable          */
-#define RTSR_HZE	0x00000008	/* 1 Hz clock interrupt Enable     */
-
-
-/*
  * Power Manager (PM) control registers
  *
  * Registers
--
2.1.0

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[PATCH v2 3/4] ARM: sa1100: remove unused RTC register definitions

[Rob Herring]

Now that register definitions have been moved to the driver, we can remove
them from machine specific code.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel at lists.infradead.org
---
v2:
- Rebase to v4.1-rc1

 arch/arm/mach-sa1100/include/mach/SA-1100.h | 34 -----------------------------
 1 file changed, 34 deletions(-)

diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h
index 0ac6cc0..7972617 100644
--- a/arch/arm/mach-sa1100/include/mach/SA-1100.h
+++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h
@@ -858,40 +858,6 @@


 /*
- * Real-Time Clock (RTC) control registers
- *
- * Registers
- *    RTAR      	Real-Time Clock (RTC) Alarm Register (read/write).
- *    RCNR      	Real-Time Clock (RTC) CouNt Register (read/write).
- *    RTTR      	Real-Time Clock (RTC) Trim Register (read/write).
- *    RTSR      	Real-Time Clock (RTC) Status Register (read/write).
- *
- * Clocks
- *    frtx, Trtx	Frequency, period of the real-time clock crystal
- *              	(32.768 kHz nominal).
- *    frtc, Trtc	Frequency, period of the real-time clock counter
- *              	(1 Hz nominal).
- */
-
-#define RTAR		__REG(0x90010000)  /* RTC Alarm Reg. */
-#define RCNR		__REG(0x90010004)  /* RTC CouNt Reg. */
-#define RTTR		__REG(0x90010008)  /* RTC Trim Reg. */
-#define RTSR		__REG(0x90010010)  /* RTC Status Reg. */
-
-#define RTTR_C  	Fld (16, 0)	/* clock divider Count - 1         */
-#define RTTR_D  	Fld (10, 16)	/* trim Delete count               */
-                	        	/* frtc = (1023*(C + 1) - D)*frtx/ */
-                	        	/*        (1023*(C + 1)^2)         */
-                	        	/* Trtc = (1023*(C + 1)^2)*Trtx/   */
-                	        	/*        (1023*(C + 1) - D)       */
-
-#define RTSR_AL 	0x00000001	/* ALarm detected                  */
-#define RTSR_HZ 	0x00000002	/* 1 Hz clock detected             */
-#define RTSR_ALE	0x00000004	/* ALarm interrupt Enable          */
-#define RTSR_HZE	0x00000008	/* 1 Hz clock interrupt Enable     */
-
-
-/*
  * Power Manager (PM) control registers
  *
  * Registers
--
2.1.0

[rtc-linux] [PATCH v2 4/4] ARM: mmp: remove unused RTC register definitions

[Rob Herring]

Now that register definitions have been moved to the driver, regs-rtc.h is
no longer used and can be removed.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
---
v2:
- Rebase to v4.1-rc1

 arch/arm/mach-mmp/include/mach/regs-rtc.h | 23 -----------------------
 1 file changed, 23 deletions(-)
 delete mode 100644 arch/arm/mach-mmp/include/mach/regs-rtc.h

diff --git a/arch/arm/mach-mmp/include/mach/regs-rtc.h b/arch/arm/mach-mmp/include/mach/regs-rtc.h
deleted file mode 100644
index 5bff886..0000000
--- a/arch/arm/mach-mmp/include/mach/regs-rtc.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef __ASM_MACH_REGS_RTC_H
-#define __ASM_MACH_REGS_RTC_H
-
-#include <mach/addr-map.h>
-
-#define RTC_VIRT_BASE	(APB_VIRT_BASE + 0x10000)
-#define RTC_REG(x)	(*((volatile u32 __iomem *)(RTC_VIRT_BASE + (x))))
-
-/*
- * Real Time Clock
- */
-
-#define RCNR		RTC_REG(0x00)	/* RTC Count Register */
-#define RTAR		RTC_REG(0x04)	/* RTC Alarm Register */
-#define RTSR		RTC_REG(0x08)	/* RTC Status Register */
-#define RTTR		RTC_REG(0x0C)	/* RTC Timer Trim Register */
-
-#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
-#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
-#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
-#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
-
-#endif /* __ASM_MACH_REGS_RTC_H */
--
2.1.0

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[PATCH v2 4/4] ARM: mmp: remove unused RTC register definitions

[Rob Herring]

Now that register definitions have been moved to the driver, regs-rtc.h is
no longer used and can be removed.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel at lists.infradead.org
---
v2:
- Rebase to v4.1-rc1

 arch/arm/mach-mmp/include/mach/regs-rtc.h | 23 -----------------------
 1 file changed, 23 deletions(-)
 delete mode 100644 arch/arm/mach-mmp/include/mach/regs-rtc.h

diff --git a/arch/arm/mach-mmp/include/mach/regs-rtc.h b/arch/arm/mach-mmp/include/mach/regs-rtc.h
deleted file mode 100644
index 5bff886..0000000
--- a/arch/arm/mach-mmp/include/mach/regs-rtc.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef __ASM_MACH_REGS_RTC_H
-#define __ASM_MACH_REGS_RTC_H
-
-#include <mach/addr-map.h>
-
-#define RTC_VIRT_BASE	(APB_VIRT_BASE + 0x10000)
-#define RTC_REG(x)	(*((volatile u32 __iomem *)(RTC_VIRT_BASE + (x))))
-
-/*
- * Real Time Clock
- */
-
-#define RCNR		RTC_REG(0x00)	/* RTC Count Register */
-#define RTAR		RTC_REG(0x04)	/* RTC Alarm Register */
-#define RTSR		RTC_REG(0x08)	/* RTC Status Register */
-#define RTTR		RTC_REG(0x0C)	/* RTC Timer Trim Register */
-
-#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
-#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
-#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
-#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
-
-#endif /* __ASM_MACH_REGS_RTC_H */
--
2.1.0