From: robh@kernel.org (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] clk: mmp: add PXA1928 clock support
Date: Thu, 30 Apr 2015 23:41:11 -0500 [thread overview]
Message-ID: <1430455271-20195-2-git-send-email-robh@kernel.org> (raw)
In-Reply-To: <1430455271-20195-1-git-send-email-robh@kernel.org>
Add initial clock support for Marvell PXA1928. The PXA1928 is a mobile
SOC and is similar to other MMP/PXA series of SOCs, so a lot of the
existing infrastructure is reused here.
Currently the PLLs are just fixed clocks, and not all leaf clocks are
implemented.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/mmp/Makefile | 2 +
drivers/clk/mmp/clk-of-pxa1928.c | 265 +++++++++++++++++++++++++++++++++++++++
2 files changed, 267 insertions(+)
create mode 100644 drivers/clk/mmp/clk-of-pxa1928.c
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 3caaf7c..9d4bc41 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -12,3 +12,5 @@ obj-$(CONFIG_MACH_MMP2_DT) += clk-of-mmp2.o
obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
obj-$(CONFIG_CPU_MMP2) += clk-mmp2.o
+
+obj-y += clk-of-pxa1928.o
diff --git a/drivers/clk/mmp/clk-of-pxa1928.c b/drivers/clk/mmp/clk-of-pxa1928.c
new file mode 100644
index 0000000..b7cb540b
--- /dev/null
+++ b/drivers/clk/mmp/clk-of-pxa1928.c
@@ -0,0 +1,265 @@
+/*
+ * pxa1928 clock framework source file
+ *
+ * Copyright (C) 2015 Linaro, Ltd.
+ * Rob Herring <robh@kernel.org>
+ *
+ * Based on drivers/clk/mmp/clk-of-mmp2.c:
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/marvell,pxa1928.h>
+
+#include "clk.h"
+#include "reset.h"
+
+#define MPMU_UART_PLL 0x14
+
+struct pxa1928_clk_unit {
+ struct mmp_clk_unit unit;
+ void __iomem *mpmu_base;
+ void __iomem *apmu_base;
+ void __iomem *apbc_base;
+ void __iomem *apbcp_base;
+};
+
+static struct mmp_param_fixed_rate_clk fixed_rate_clks[] = {
+ {0, "clk32", NULL, CLK_IS_ROOT, 32768},
+ {0, "vctcxo", NULL, CLK_IS_ROOT, 26000000},
+ {0, "pll1_624", NULL, CLK_IS_ROOT, 624000000},
+ {0, "pll5p", NULL, CLK_IS_ROOT, 832000000},
+ {0, "pll5", NULL, CLK_IS_ROOT, 1248000000},
+ {0, "usb_pll", NULL, CLK_IS_ROOT, 480000000},
+};
+
+static struct mmp_param_fixed_factor_clk fixed_factor_clks[] = {
+ {0, "pll1_d2", "pll1_624", 1, 2, 0},
+ {0, "pll1_d9", "pll1_624", 1, 9, 0},
+ {0, "pll1_d12", "pll1_624", 1, 12, 0},
+ {0, "pll1_d16", "pll1_624", 1, 16, 0},
+ {0, "pll1_d20", "pll1_624", 1, 20, 0},
+ {0, "pll1_416", "pll1_624", 2, 3, 0},
+ {0, "vctcxo_d2", "vctcxo", 1, 2, 0},
+ {0, "vctcxo_d4", "vctcxo", 1, 4, 0},
+};
+
+static struct mmp_clk_factor_masks uart_factor_masks = {
+ .factor = 2,
+ .num_mask = 0x1fff,
+ .den_mask = 0x1fff,
+ .num_shift = 16,
+ .den_shift = 0,
+};
+
+static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
+ {.num = 832, .den = 234}, /*58.5MHZ */
+ {.num = 1, .den = 1}, /*26MHZ */
+};
+
+static void pxa1928_pll_init(struct pxa1928_clk_unit *pxa_unit)
+{
+ struct clk *clk;
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_fixed_rate_clks(unit, fixed_rate_clks,
+ ARRAY_SIZE(fixed_rate_clks));
+
+ mmp_register_fixed_factor_clks(unit, fixed_factor_clks,
+ ARRAY_SIZE(fixed_factor_clks));
+
+ clk = mmp_clk_register_factor("uart_pll", "pll1_416",
+ CLK_SET_RATE_PARENT,
+ pxa_unit->mpmu_base + MPMU_UART_PLL,
+ &uart_factor_masks, uart_factor_tbl,
+ ARRAY_SIZE(uart_factor_tbl), NULL);
+}
+
+static DEFINE_SPINLOCK(uart0_lock);
+static DEFINE_SPINLOCK(uart1_lock);
+static DEFINE_SPINLOCK(uart2_lock);
+static DEFINE_SPINLOCK(uart3_lock);
+static const char *uart_parent_names[] = {"uart_pll", "vctcxo"};
+
+static DEFINE_SPINLOCK(ssp0_lock);
+static DEFINE_SPINLOCK(ssp1_lock);
+static const char *ssp_parent_names[] = {"vctcxo_d4", "vctcxo_d2", "vctcxo", "pll1_d12"};
+
+static DEFINE_SPINLOCK(reset_lock);
+
+static struct mmp_param_mux_clk apbc_mux_clks[] = {
+ {0, "uart0_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, PXA1928_CLK_UART0 * 4, 4, 3, 0, &uart0_lock},
+ {0, "uart1_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, PXA1928_CLK_UART1 * 4, 4, 3, 0, &uart1_lock},
+ {0, "uart2_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, PXA1928_CLK_UART2 * 4, 4, 3, 0, &uart2_lock},
+ {0, "uart3_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, PXA1928_CLK_UART3 * 4, 4, 3, 0, &uart3_lock},
+ {0, "ssp0_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, PXA1928_CLK_SSP0 * 4, 4, 3, 0, &ssp0_lock},
+ {0, "ssp1_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, PXA1928_CLK_SSP1 * 4, 4, 3, 0, &ssp1_lock},
+};
+
+static struct mmp_param_gate_clk apbc_gate_clks[] = {
+ {PXA1928_CLK_TWSI0, "twsi0_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_TWSI0 * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA1928_CLK_TWSI1, "twsi1_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_TWSI1 * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA1928_CLK_TWSI2, "twsi2_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_TWSI2 * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA1928_CLK_TWSI3, "twsi3_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_TWSI3 * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA1928_CLK_TWSI4, "twsi4_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_TWSI4 * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA1928_CLK_TWSI5, "twsi5_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_TWSI5 * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA1928_CLK_GPIO, "gpio_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_GPIO * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA1928_CLK_KPC, "kpc_clk", "clk32", CLK_SET_RATE_PARENT, PXA1928_CLK_KPC * 4, 0x3, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, NULL},
+ {PXA1928_CLK_RTC, "rtc_clk", "clk32", CLK_SET_RATE_PARENT, PXA1928_CLK_RTC * 4, 0x83, 0x83, 0x0, MMP_CLK_GATE_NEED_DELAY, NULL},
+ {PXA1928_CLK_PWM0, "pwm0_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_PWM0 * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA1928_CLK_PWM1, "pwm1_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_PWM1 * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA1928_CLK_PWM2, "pwm2_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_PWM2 * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA1928_CLK_PWM3, "pwm3_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_PWM3 * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ /* The gate clocks has mux parent. */
+ {PXA1928_CLK_UART0, "uart0_clk", "uart0_mux", CLK_SET_RATE_PARENT, PXA1928_CLK_UART0 * 4, 0x3, 0x3, 0x0, 0, &uart0_lock},
+ {PXA1928_CLK_UART1, "uart1_clk", "uart1_mux", CLK_SET_RATE_PARENT, PXA1928_CLK_UART1 * 4, 0x3, 0x3, 0x0, 0, &uart1_lock},
+ {PXA1928_CLK_UART2, "uart2_clk", "uart2_mux", CLK_SET_RATE_PARENT, PXA1928_CLK_UART2 * 4, 0x3, 0x3, 0x0, 0, &uart2_lock},
+ {PXA1928_CLK_UART3, "uart3_clk", "uart3_mux", CLK_SET_RATE_PARENT, PXA1928_CLK_UART3 * 4, 0x3, 0x3, 0x0, 0, &uart3_lock},
+ {PXA1928_CLK_SSP0, "ssp0_clk", "ssp0_mux", CLK_SET_RATE_PARENT, PXA1928_CLK_SSP0 * 4, 0x3, 0x3, 0x0, 0, &ssp0_lock},
+ {PXA1928_CLK_SSP1, "ssp1_clk", "ssp1_mux", CLK_SET_RATE_PARENT, PXA1928_CLK_SSP1 * 4, 0x3, 0x3, 0x0, 0, &ssp1_lock},
+};
+
+static void pxa1928_apb_periph_clk_init(struct pxa1928_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_mux_clks(unit, apbc_mux_clks, pxa_unit->apbc_base,
+ ARRAY_SIZE(apbc_mux_clks));
+
+ mmp_register_gate_clks(unit, apbc_gate_clks, pxa_unit->apbc_base,
+ ARRAY_SIZE(apbc_gate_clks));
+}
+
+static DEFINE_SPINLOCK(sdh0_lock);
+static DEFINE_SPINLOCK(sdh1_lock);
+static DEFINE_SPINLOCK(sdh2_lock);
+static DEFINE_SPINLOCK(sdh3_lock);
+static DEFINE_SPINLOCK(sdh4_lock);
+static const char *sdh_parent_names[] = {"pll1_624", "pll5p", "pll5", "pll1_416"};
+
+static DEFINE_SPINLOCK(usb_lock);
+
+static struct mmp_param_mux_clk apmu_mux_clks[] = {
+ {0, "sdh_mux", sdh_parent_names, ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT, PXA1928_CLK_SDH0 * 4, 8, 2, 0, &sdh0_lock},
+};
+
+static struct mmp_param_div_clk apmu_div_clks[] = {
+ {0, "sdh_div", "sdh_mux", 0, PXA1928_CLK_SDH0 * 4, 10, 4, CLK_DIVIDER_ONE_BASED, &sdh0_lock},
+};
+
+static struct mmp_param_gate_clk apmu_gate_clks[] = {
+ {PXA1928_CLK_USB, "usb_clk", "usb_pll", 0, PXA1928_CLK_USB * 4, 0x9, 0x9, 0x0, 0, &usb_lock},
+ {PXA1928_CLK_HSIC, "hsic_clk", "usb_pll", 0, PXA1928_CLK_HSIC * 4, 0x9, 0x9, 0x0, 0, &usb_lock},
+ /* The gate clocks has mux parent. */
+ {PXA1928_CLK_SDH0, "sdh0_clk", "sdh_div", CLK_SET_RATE_PARENT, PXA1928_CLK_SDH0 * 4, 0x1b, 0x1b, 0x0, 0, &sdh0_lock},
+ {PXA1928_CLK_SDH1, "sdh1_clk", "sdh_div", CLK_SET_RATE_PARENT, PXA1928_CLK_SDH1 * 4, 0x1b, 0x1b, 0x0, 0, &sdh1_lock},
+ {PXA1928_CLK_SDH2, "sdh2_clk", "sdh_div", CLK_SET_RATE_PARENT, PXA1928_CLK_SDH2 * 4, 0x1b, 0x1b, 0x0, 0, &sdh2_lock},
+ {PXA1928_CLK_SDH3, "sdh3_clk", "sdh_div", CLK_SET_RATE_PARENT, PXA1928_CLK_SDH3 * 4, 0x1b, 0x1b, 0x0, 0, &sdh3_lock},
+ {PXA1928_CLK_SDH4, "sdh4_clk", "sdh_div", CLK_SET_RATE_PARENT, PXA1928_CLK_SDH4 * 4, 0x1b, 0x1b, 0x0, 0, &sdh4_lock},
+};
+
+static void pxa1928_axi_periph_clk_init(struct pxa1928_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_mux_clks(unit, apmu_mux_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_mux_clks));
+
+ mmp_register_div_clks(unit, apmu_div_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_div_clks));
+
+ mmp_register_gate_clks(unit, apmu_gate_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_gate_clks));
+}
+
+static void pxa1928_clk_reset_init(struct device_node *np,
+ struct pxa1928_clk_unit *pxa_unit)
+{
+ struct mmp_clk_reset_cell *cells;
+ int i, base, nr_resets;
+
+ nr_resets = ARRAY_SIZE(apbc_gate_clks);
+ cells = kcalloc(nr_resets, sizeof(*cells), GFP_KERNEL);
+ if (!cells)
+ return;
+
+ base = 0;
+ for (i = 0; i < nr_resets; i++) {
+ cells[base + i].clk_id = apbc_gate_clks[i].id;
+ cells[base + i].reg =
+ pxa_unit->apbc_base + apbc_gate_clks[i].offset;
+ cells[base + i].flags = 0;
+ cells[base + i].lock = apbc_gate_clks[i].lock;
+ cells[base + i].bits = 0x4;
+ }
+
+ mmp_clk_reset_register(np, cells, nr_resets);
+}
+
+static void __init pxa1928_mpmu_clk_init(struct device_node *np)
+{
+ struct pxa1928_clk_unit *pxa_unit;
+
+ pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+ if (!pxa_unit)
+ return;
+
+ pxa_unit->mpmu_base = of_iomap(np, 0);
+ if (!pxa_unit->mpmu_base) {
+ pr_err("failed to map mpmu registers\n");
+ return;
+ }
+
+ pxa1928_pll_init(pxa_unit);
+}
+CLK_OF_DECLARE(pxa1928_mpmu_clk, "marvell,pxa1928-mpmu", pxa1928_mpmu_clk_init);
+
+static void __init pxa1928_apmu_clk_init(struct device_node *np)
+{
+ struct pxa1928_clk_unit *pxa_unit;
+
+ pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+ if (!pxa_unit)
+ return;
+
+ pxa_unit->apmu_base = of_iomap(np, 0);
+ if (!pxa_unit->apmu_base) {
+ pr_err("failed to map apmu registers\n");
+ return;
+ }
+
+ mmp_clk_init(np, &pxa_unit->unit, PXA1928_APMU_NR_CLKS);
+
+ pxa1928_axi_periph_clk_init(pxa_unit);
+}
+CLK_OF_DECLARE(pxa1928_apmu_clk, "marvell,pxa1928-apmu", pxa1928_apmu_clk_init);
+
+static void __init pxa1928_apbc_clk_init(struct device_node *np)
+{
+ struct pxa1928_clk_unit *pxa_unit;
+
+ pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+ if (!pxa_unit)
+ return;
+
+ pxa_unit->apbc_base = of_iomap(np, 0);
+ if (!pxa_unit->apbc_base) {
+ pr_err("failed to map apbc registers\n");
+ return;
+ }
+
+ mmp_clk_init(np, &pxa_unit->unit, PXA1928_APBC_NR_CLKS);
+
+ pxa1928_apb_periph_clk_init(pxa_unit);
+ pxa1928_clk_reset_init(np, pxa_unit);
+}
+CLK_OF_DECLARE(pxa1928_apbc_clk, "marvell,pxa1928-apbc", pxa1928_apbc_clk_init);
--
2.1.0
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Mike Turquette <mturquette@linaro.org>,
Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Rob Herring <robh@kernel.org>
Subject: [PATCH 2/2] clk: mmp: add PXA1928 clock support
Date: Thu, 30 Apr 2015 23:41:11 -0500 [thread overview]
Message-ID: <1430455271-20195-2-git-send-email-robh@kernel.org> (raw)
In-Reply-To: <1430455271-20195-1-git-send-email-robh@kernel.org>
Add initial clock support for Marvell PXA1928. The PXA1928 is a mobile
SOC and is similar to other MMP/PXA series of SOCs, so a lot of the
existing infrastructure is reused here.
Currently the PLLs are just fixed clocks, and not all leaf clocks are
implemented.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/mmp/Makefile | 2 +
drivers/clk/mmp/clk-of-pxa1928.c | 265 +++++++++++++++++++++++++++++++++++++++
2 files changed, 267 insertions(+)
create mode 100644 drivers/clk/mmp/clk-of-pxa1928.c
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 3caaf7c..9d4bc41 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -12,3 +12,5 @@ obj-$(CONFIG_MACH_MMP2_DT) += clk-of-mmp2.o
obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
obj-$(CONFIG_CPU_MMP2) += clk-mmp2.o
+
+obj-y += clk-of-pxa1928.o
diff --git a/drivers/clk/mmp/clk-of-pxa1928.c b/drivers/clk/mmp/clk-of-pxa1928.c
new file mode 100644
index 0000000..b7cb540b
--- /dev/null
+++ b/drivers/clk/mmp/clk-of-pxa1928.c
@@ -0,0 +1,265 @@
+/*
+ * pxa1928 clock framework source file
+ *
+ * Copyright (C) 2015 Linaro, Ltd.
+ * Rob Herring <robh@kernel.org>
+ *
+ * Based on drivers/clk/mmp/clk-of-mmp2.c:
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/marvell,pxa1928.h>
+
+#include "clk.h"
+#include "reset.h"
+
+#define MPMU_UART_PLL 0x14
+
+struct pxa1928_clk_unit {
+ struct mmp_clk_unit unit;
+ void __iomem *mpmu_base;
+ void __iomem *apmu_base;
+ void __iomem *apbc_base;
+ void __iomem *apbcp_base;
+};
+
+static struct mmp_param_fixed_rate_clk fixed_rate_clks[] = {
+ {0, "clk32", NULL, CLK_IS_ROOT, 32768},
+ {0, "vctcxo", NULL, CLK_IS_ROOT, 26000000},
+ {0, "pll1_624", NULL, CLK_IS_ROOT, 624000000},
+ {0, "pll5p", NULL, CLK_IS_ROOT, 832000000},
+ {0, "pll5", NULL, CLK_IS_ROOT, 1248000000},
+ {0, "usb_pll", NULL, CLK_IS_ROOT, 480000000},
+};
+
+static struct mmp_param_fixed_factor_clk fixed_factor_clks[] = {
+ {0, "pll1_d2", "pll1_624", 1, 2, 0},
+ {0, "pll1_d9", "pll1_624", 1, 9, 0},
+ {0, "pll1_d12", "pll1_624", 1, 12, 0},
+ {0, "pll1_d16", "pll1_624", 1, 16, 0},
+ {0, "pll1_d20", "pll1_624", 1, 20, 0},
+ {0, "pll1_416", "pll1_624", 2, 3, 0},
+ {0, "vctcxo_d2", "vctcxo", 1, 2, 0},
+ {0, "vctcxo_d4", "vctcxo", 1, 4, 0},
+};
+
+static struct mmp_clk_factor_masks uart_factor_masks = {
+ .factor = 2,
+ .num_mask = 0x1fff,
+ .den_mask = 0x1fff,
+ .num_shift = 16,
+ .den_shift = 0,
+};
+
+static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
+ {.num = 832, .den = 234}, /*58.5MHZ */
+ {.num = 1, .den = 1}, /*26MHZ */
+};
+
+static void pxa1928_pll_init(struct pxa1928_clk_unit *pxa_unit)
+{
+ struct clk *clk;
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_fixed_rate_clks(unit, fixed_rate_clks,
+ ARRAY_SIZE(fixed_rate_clks));
+
+ mmp_register_fixed_factor_clks(unit, fixed_factor_clks,
+ ARRAY_SIZE(fixed_factor_clks));
+
+ clk = mmp_clk_register_factor("uart_pll", "pll1_416",
+ CLK_SET_RATE_PARENT,
+ pxa_unit->mpmu_base + MPMU_UART_PLL,
+ &uart_factor_masks, uart_factor_tbl,
+ ARRAY_SIZE(uart_factor_tbl), NULL);
+}
+
+static DEFINE_SPINLOCK(uart0_lock);
+static DEFINE_SPINLOCK(uart1_lock);
+static DEFINE_SPINLOCK(uart2_lock);
+static DEFINE_SPINLOCK(uart3_lock);
+static const char *uart_parent_names[] = {"uart_pll", "vctcxo"};
+
+static DEFINE_SPINLOCK(ssp0_lock);
+static DEFINE_SPINLOCK(ssp1_lock);
+static const char *ssp_parent_names[] = {"vctcxo_d4", "vctcxo_d2", "vctcxo", "pll1_d12"};
+
+static DEFINE_SPINLOCK(reset_lock);
+
+static struct mmp_param_mux_clk apbc_mux_clks[] = {
+ {0, "uart0_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, PXA1928_CLK_UART0 * 4, 4, 3, 0, &uart0_lock},
+ {0, "uart1_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, PXA1928_CLK_UART1 * 4, 4, 3, 0, &uart1_lock},
+ {0, "uart2_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, PXA1928_CLK_UART2 * 4, 4, 3, 0, &uart2_lock},
+ {0, "uart3_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, PXA1928_CLK_UART3 * 4, 4, 3, 0, &uart3_lock},
+ {0, "ssp0_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, PXA1928_CLK_SSP0 * 4, 4, 3, 0, &ssp0_lock},
+ {0, "ssp1_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, PXA1928_CLK_SSP1 * 4, 4, 3, 0, &ssp1_lock},
+};
+
+static struct mmp_param_gate_clk apbc_gate_clks[] = {
+ {PXA1928_CLK_TWSI0, "twsi0_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_TWSI0 * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA1928_CLK_TWSI1, "twsi1_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_TWSI1 * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA1928_CLK_TWSI2, "twsi2_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_TWSI2 * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA1928_CLK_TWSI3, "twsi3_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_TWSI3 * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA1928_CLK_TWSI4, "twsi4_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_TWSI4 * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA1928_CLK_TWSI5, "twsi5_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_TWSI5 * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA1928_CLK_GPIO, "gpio_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_GPIO * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA1928_CLK_KPC, "kpc_clk", "clk32", CLK_SET_RATE_PARENT, PXA1928_CLK_KPC * 4, 0x3, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, NULL},
+ {PXA1928_CLK_RTC, "rtc_clk", "clk32", CLK_SET_RATE_PARENT, PXA1928_CLK_RTC * 4, 0x83, 0x83, 0x0, MMP_CLK_GATE_NEED_DELAY, NULL},
+ {PXA1928_CLK_PWM0, "pwm0_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_PWM0 * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA1928_CLK_PWM1, "pwm1_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_PWM1 * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA1928_CLK_PWM2, "pwm2_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_PWM2 * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA1928_CLK_PWM3, "pwm3_clk", "vctcxo", CLK_SET_RATE_PARENT, PXA1928_CLK_PWM3 * 4, 0x3, 0x3, 0x0, 0, &reset_lock},
+ /* The gate clocks has mux parent. */
+ {PXA1928_CLK_UART0, "uart0_clk", "uart0_mux", CLK_SET_RATE_PARENT, PXA1928_CLK_UART0 * 4, 0x3, 0x3, 0x0, 0, &uart0_lock},
+ {PXA1928_CLK_UART1, "uart1_clk", "uart1_mux", CLK_SET_RATE_PARENT, PXA1928_CLK_UART1 * 4, 0x3, 0x3, 0x0, 0, &uart1_lock},
+ {PXA1928_CLK_UART2, "uart2_clk", "uart2_mux", CLK_SET_RATE_PARENT, PXA1928_CLK_UART2 * 4, 0x3, 0x3, 0x0, 0, &uart2_lock},
+ {PXA1928_CLK_UART3, "uart3_clk", "uart3_mux", CLK_SET_RATE_PARENT, PXA1928_CLK_UART3 * 4, 0x3, 0x3, 0x0, 0, &uart3_lock},
+ {PXA1928_CLK_SSP0, "ssp0_clk", "ssp0_mux", CLK_SET_RATE_PARENT, PXA1928_CLK_SSP0 * 4, 0x3, 0x3, 0x0, 0, &ssp0_lock},
+ {PXA1928_CLK_SSP1, "ssp1_clk", "ssp1_mux", CLK_SET_RATE_PARENT, PXA1928_CLK_SSP1 * 4, 0x3, 0x3, 0x0, 0, &ssp1_lock},
+};
+
+static void pxa1928_apb_periph_clk_init(struct pxa1928_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_mux_clks(unit, apbc_mux_clks, pxa_unit->apbc_base,
+ ARRAY_SIZE(apbc_mux_clks));
+
+ mmp_register_gate_clks(unit, apbc_gate_clks, pxa_unit->apbc_base,
+ ARRAY_SIZE(apbc_gate_clks));
+}
+
+static DEFINE_SPINLOCK(sdh0_lock);
+static DEFINE_SPINLOCK(sdh1_lock);
+static DEFINE_SPINLOCK(sdh2_lock);
+static DEFINE_SPINLOCK(sdh3_lock);
+static DEFINE_SPINLOCK(sdh4_lock);
+static const char *sdh_parent_names[] = {"pll1_624", "pll5p", "pll5", "pll1_416"};
+
+static DEFINE_SPINLOCK(usb_lock);
+
+static struct mmp_param_mux_clk apmu_mux_clks[] = {
+ {0, "sdh_mux", sdh_parent_names, ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT, PXA1928_CLK_SDH0 * 4, 8, 2, 0, &sdh0_lock},
+};
+
+static struct mmp_param_div_clk apmu_div_clks[] = {
+ {0, "sdh_div", "sdh_mux", 0, PXA1928_CLK_SDH0 * 4, 10, 4, CLK_DIVIDER_ONE_BASED, &sdh0_lock},
+};
+
+static struct mmp_param_gate_clk apmu_gate_clks[] = {
+ {PXA1928_CLK_USB, "usb_clk", "usb_pll", 0, PXA1928_CLK_USB * 4, 0x9, 0x9, 0x0, 0, &usb_lock},
+ {PXA1928_CLK_HSIC, "hsic_clk", "usb_pll", 0, PXA1928_CLK_HSIC * 4, 0x9, 0x9, 0x0, 0, &usb_lock},
+ /* The gate clocks has mux parent. */
+ {PXA1928_CLK_SDH0, "sdh0_clk", "sdh_div", CLK_SET_RATE_PARENT, PXA1928_CLK_SDH0 * 4, 0x1b, 0x1b, 0x0, 0, &sdh0_lock},
+ {PXA1928_CLK_SDH1, "sdh1_clk", "sdh_div", CLK_SET_RATE_PARENT, PXA1928_CLK_SDH1 * 4, 0x1b, 0x1b, 0x0, 0, &sdh1_lock},
+ {PXA1928_CLK_SDH2, "sdh2_clk", "sdh_div", CLK_SET_RATE_PARENT, PXA1928_CLK_SDH2 * 4, 0x1b, 0x1b, 0x0, 0, &sdh2_lock},
+ {PXA1928_CLK_SDH3, "sdh3_clk", "sdh_div", CLK_SET_RATE_PARENT, PXA1928_CLK_SDH3 * 4, 0x1b, 0x1b, 0x0, 0, &sdh3_lock},
+ {PXA1928_CLK_SDH4, "sdh4_clk", "sdh_div", CLK_SET_RATE_PARENT, PXA1928_CLK_SDH4 * 4, 0x1b, 0x1b, 0x0, 0, &sdh4_lock},
+};
+
+static void pxa1928_axi_periph_clk_init(struct pxa1928_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_mux_clks(unit, apmu_mux_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_mux_clks));
+
+ mmp_register_div_clks(unit, apmu_div_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_div_clks));
+
+ mmp_register_gate_clks(unit, apmu_gate_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_gate_clks));
+}
+
+static void pxa1928_clk_reset_init(struct device_node *np,
+ struct pxa1928_clk_unit *pxa_unit)
+{
+ struct mmp_clk_reset_cell *cells;
+ int i, base, nr_resets;
+
+ nr_resets = ARRAY_SIZE(apbc_gate_clks);
+ cells = kcalloc(nr_resets, sizeof(*cells), GFP_KERNEL);
+ if (!cells)
+ return;
+
+ base = 0;
+ for (i = 0; i < nr_resets; i++) {
+ cells[base + i].clk_id = apbc_gate_clks[i].id;
+ cells[base + i].reg =
+ pxa_unit->apbc_base + apbc_gate_clks[i].offset;
+ cells[base + i].flags = 0;
+ cells[base + i].lock = apbc_gate_clks[i].lock;
+ cells[base + i].bits = 0x4;
+ }
+
+ mmp_clk_reset_register(np, cells, nr_resets);
+}
+
+static void __init pxa1928_mpmu_clk_init(struct device_node *np)
+{
+ struct pxa1928_clk_unit *pxa_unit;
+
+ pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+ if (!pxa_unit)
+ return;
+
+ pxa_unit->mpmu_base = of_iomap(np, 0);
+ if (!pxa_unit->mpmu_base) {
+ pr_err("failed to map mpmu registers\n");
+ return;
+ }
+
+ pxa1928_pll_init(pxa_unit);
+}
+CLK_OF_DECLARE(pxa1928_mpmu_clk, "marvell,pxa1928-mpmu", pxa1928_mpmu_clk_init);
+
+static void __init pxa1928_apmu_clk_init(struct device_node *np)
+{
+ struct pxa1928_clk_unit *pxa_unit;
+
+ pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+ if (!pxa_unit)
+ return;
+
+ pxa_unit->apmu_base = of_iomap(np, 0);
+ if (!pxa_unit->apmu_base) {
+ pr_err("failed to map apmu registers\n");
+ return;
+ }
+
+ mmp_clk_init(np, &pxa_unit->unit, PXA1928_APMU_NR_CLKS);
+
+ pxa1928_axi_periph_clk_init(pxa_unit);
+}
+CLK_OF_DECLARE(pxa1928_apmu_clk, "marvell,pxa1928-apmu", pxa1928_apmu_clk_init);
+
+static void __init pxa1928_apbc_clk_init(struct device_node *np)
+{
+ struct pxa1928_clk_unit *pxa_unit;
+
+ pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+ if (!pxa_unit)
+ return;
+
+ pxa_unit->apbc_base = of_iomap(np, 0);
+ if (!pxa_unit->apbc_base) {
+ pr_err("failed to map apbc registers\n");
+ return;
+ }
+
+ mmp_clk_init(np, &pxa_unit->unit, PXA1928_APBC_NR_CLKS);
+
+ pxa1928_apb_periph_clk_init(pxa_unit);
+ pxa1928_clk_reset_init(np, pxa_unit);
+}
+CLK_OF_DECLARE(pxa1928_apbc_clk, "marvell,pxa1928-apbc", pxa1928_apbc_clk_init);
--
2.1.0
next prev parent reply other threads:[~2015-05-01 4:41 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-01 4:41 [PATCH 1/2] dt-bindings: Add pxa1928 clock binding Rob Herring
2015-05-01 4:41 ` Rob Herring
2015-05-01 4:41 ` Rob Herring [this message]
2015-05-01 4:41 ` [PATCH 2/2] clk: mmp: add PXA1928 clock support Rob Herring
2015-05-06 7:23 ` Stephen Boyd
2015-05-06 7:23 ` Stephen Boyd
2015-05-06 7:17 ` [PATCH 1/2] dt-bindings: Add pxa1928 clock binding Stephen Boyd
2015-05-06 7:17 ` Stephen Boyd
2015-05-06 7:17 ` Stephen Boyd
2015-05-06 13:05 ` Rob Herring
2015-05-06 13:05 ` Rob Herring
2015-05-07 0:30 ` Stephen Boyd
2015-05-07 0:30 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430455271-20195-2-git-send-email-robh@kernel.org \
--to=robh@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.