From: Suman Tripathi <stripathi@apm.com>
To: olof@lixom.net, tj@kernel.org, arnd@arndb.de
Cc: linux-scsi@vger.kernel.org, linux-ide@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
mlangsdo@redhat.com, jcm@redhat.com, patches@apm.com,
Suman Tripathi <stripathi@apm.com>
Subject: [PATCH v6 1/1] ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.
Date: Mon, 11 May 2015 14:06:15 +0530 [thread overview]
Message-ID: <1431333375-30433-2-git-send-email-stripathi@apm.com> (raw)
In-Reply-To: <1431333375-30433-1-git-send-email-stripathi@apm.com>
This patch enables full AHCI feature support for APM X-Gene SoC SATA
host controller. The following errata's are removed:
1. 2a0bdff6b95 ("ahci-xgene: fix the dma state machine lockup for the
IDENTIFY DEVICE PIO mode command")
2. 09c32aaa368 ("ahci_xgene: Fix the dma state machine lockup for the
ATA_CMD_SMART PIO mode command")
3. 1540035da71 ("ahci_xgene: Implement the xgene_ahci_poll_reg_val to
support PMP")
4. a3a84bc7c88 ("ahci_xgene: Implement the workaround to support PMP
enumeration and discovery")
5. 1102407bb71 ("ahci_xgene: Fix the DMA state machine lockup for the
ATA_CMD_PACKET PIO mode command")
6. 72f79f9e35b ("ahci_xgene: Removing NCQ support from the APM X-Gene
SoC AHCI SATA Host Controller driver")
In addition, enable PMP support for APM X-Gene SoC and enable FBS
support for second generation APM X-Gene SoC.
Signed-off-by: Suman Tripathi <stripathi@apm.com>
---
drivers/ata/ahci_xgene.c | 105 ++++++++++++++++++++++++++++++++++++++---------
1 file changed, 86 insertions(+), 19 deletions(-)
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index 2b78510..2add250 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -27,6 +27,7 @@
#include <linux/platform_device.h>
#include <linux/ahci_platform.h>
#include <linux/of_address.h>
+#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/phy/phy.h>
#include "ahci.h"
@@ -84,6 +85,11 @@
/* Max retry for link down */
#define MAX_LINK_DOWN_RETRY 3
+enum xgene_ahci_version {
+ XGENE_AHCI_V1 = 1,
+ XGENE_AHCI_V2,
+};
+
struct xgene_ahci_context {
struct ahci_host_priv *hpriv;
struct device *dev;
@@ -542,7 +548,7 @@ softreset_retry:
return rc;
}
-static struct ata_port_operations xgene_ahci_ops = {
+static struct ata_port_operations xgene_ahci_v1_ops = {
.inherits = &ahci_ops,
.host_stop = xgene_ahci_host_stop,
.hardreset = xgene_ahci_hardreset,
@@ -552,11 +558,25 @@ static struct ata_port_operations xgene_ahci_ops = {
.pmp_softreset = xgene_ahci_pmp_softreset
};
-static const struct ata_port_info xgene_ahci_port_info = {
+static const struct ata_port_info xgene_ahci_v1_port_info = {
.flags = AHCI_FLAG_COMMON | ATA_FLAG_PMP,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
- .port_ops = &xgene_ahci_ops,
+ .port_ops = &xgene_ahci_v1_ops,
+};
+
+static struct ata_port_operations xgene_ahci_v2_ops = {
+ .inherits = &ahci_ops,
+ .host_stop = xgene_ahci_host_stop,
+ .hardreset = xgene_ahci_hardreset,
+ .read_id = xgene_ahci_read_id,
+};
+
+static const struct ata_port_info xgene_ahci_v2_port_info = {
+ .flags = AHCI_FLAG_COMMON | ATA_FLAG_PMP,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &xgene_ahci_v2_ops,
};
static int xgene_ahci_hw_init(struct ahci_host_priv *hpriv)
@@ -629,12 +649,32 @@ static struct scsi_host_template ahci_platform_sht = {
AHCI_SHT(DRV_NAME),
};
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id xgene_ahci_acpi_match[] = {
+ { "APMC0D0D", XGENE_AHCI_V1},
+ { "APMC0D32", XGENE_AHCI_V2},
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match);
+#endif
+
+static const struct of_device_id xgene_ahci_of_match[] = {
+ {.compatible = "apm,xgene-ahci", .data = (void *) XGENE_AHCI_V1},
+ {.compatible = "apm,xgene-ahci-v2", .data = (void *) XGENE_AHCI_V2},
+ {},
+};
+MODULE_DEVICE_TABLE(of, xgene_ahci_of_match);
+
static int xgene_ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
struct xgene_ahci_context *ctx;
struct resource *res;
+ const struct of_device_id *of_devid;
+ enum xgene_ahci_version version = XGENE_AHCI_V1;
+ const struct ata_port_info *ppi[] = { &xgene_ahci_v1_port_info,
+ &xgene_ahci_v2_port_info };
int rc;
hpriv = ahci_platform_get_resources(pdev);
@@ -677,6 +717,37 @@ static int xgene_ahci_probe(struct platform_device *pdev)
ctx->csr_mux = csr;
}
+ of_devid = of_match_device(xgene_ahci_of_match, dev);
+ if (of_devid) {
+ if (of_devid->data)
+ version = (enum xgene_ahci_version) of_devid->data;
+ }
+#ifdef CONFIG_ACPI
+ else {
+ const struct acpi_device_id *acpi_id;
+ struct acpi_device_info *info;
+ acpi_status status;
+
+ acpi_id = acpi_match_device(xgene_ahci_acpi_match, &pdev->dev);
+ if (!acpi_id) {
+ dev_warn(&pdev->dev, "No node entry in ACPI table. Assume version1\n");
+ version = XGENE_AHCI_V1;
+ }
+
+ if (acpi_id->driver_data) {
+ version = (enum xgene_ahci_version) acpi_id->driver_data;
+ status = acpi_get_object_info(ACPI_HANDLE(&pdev->dev), &info);
+ if (ACPI_FAILURE(status)) {
+ dev_warn(&pdev->dev, "%s: Error reading device info. Assume version1\n",
+ __func__);
+ version = XGENE_AHCI_V1;
+ }
+ if (info->valid & ACPI_VALID_CID)
+ version = XGENE_AHCI_V2;
+ }
+ }
+#endif
+
dev_dbg(dev, "VAddr 0x%p Mmio VAddr 0x%p\n", ctx->csr_core,
hpriv->mmio);
@@ -704,9 +775,19 @@ static int xgene_ahci_probe(struct platform_device *pdev)
/* Configure the host controller */
xgene_ahci_hw_init(hpriv);
skip_clk_phy:
- hpriv->flags = AHCI_HFLAG_NO_PMP | AHCI_HFLAG_NO_NCQ;
- rc = ahci_platform_init_host(pdev, hpriv, &xgene_ahci_port_info,
+ switch (version) {
+ case XGENE_AHCI_V1:
+ hpriv->flags = AHCI_HFLAG_NO_NCQ;
+ break;
+ case XGENE_AHCI_V2:
+ hpriv->flags |= AHCI_HFLAG_YES_FBS | AHCI_HFLAG_EDGE_IRQ;
+ break;
+ default:
+ break;
+ }
+
+ rc = ahci_platform_init_host(pdev, hpriv, ppi[version - 1],
&ahci_platform_sht);
if (rc)
goto disable_resources;
@@ -719,20 +800,6 @@ disable_resources:
return rc;
}
-#ifdef CONFIG_ACPI
-static const struct acpi_device_id xgene_ahci_acpi_match[] = {
- { "APMC0D0D", },
- { }
-};
-MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match);
-#endif
-
-static const struct of_device_id xgene_ahci_of_match[] = {
- {.compatible = "apm,xgene-ahci"},
- {},
-};
-MODULE_DEVICE_TABLE(of, xgene_ahci_of_match);
-
static struct platform_driver xgene_ahci_driver = {
.probe = xgene_ahci_probe,
.remove = ata_platform_remove_one,
--
1.8.2.1
next prev parent reply other threads:[~2015-05-11 8:37 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-11 8:36 [PATCH v6 0/1] ata: ahci_xgene: Add support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller driver Suman Tripathi
2015-05-11 8:36 ` Suman Tripathi [this message]
2015-05-11 11:28 ` [PATCH v6 1/1] ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller Tejun Heo
2015-05-11 11:28 ` Tejun Heo
2015-05-11 13:31 ` Suman Tripathi
2015-05-11 13:31 ` Suman Tripathi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431333375-30433-2-git-send-email-stripathi@apm.com \
--to=stripathi@apm.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=jcm@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=mlangsdo@redhat.com \
--cc=olof@lixom.net \
--cc=patches@apm.com \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.