All of lore.kernel.org
 help / color / mirror / Atom feed
From: Brian Norris <computersforpeace@gmail.com>
To: <linux-mtd@lists.infradead.org>
Cc: devicetree@vger.kernel.org,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"Arnd Bergmann" <arnd@arndb.de>,
	"Scott Branden" <sbranden@broadcom.com>,
	"Kevin Cernekee" <cernekee@gmail.com>,
	"Corneliu Doban" <cdoban@broadcom.com>,
	"Ray Jui" <rjui@broadcom.com>, "Rafał Miłecki" <zajec5@gmail.com>,
	linux-kernel@vger.kernel.org,
	"Dan Ehrenberg" <dehrenberg@chromium.org>,
	"Jonathan Richardson" <jonathar@broadcom.com>,
	"Anatol Pomazao" <anatol@google.com>,
	"Gregory Fong" <gregory.0xf0@gmail.com>,
	bcm-kernel-feedback-list@broadcom.com,
	"Brian Norris" <computersforpeace@gmail.com>,
	"Dmitry Torokhov" <dtor@google.com>
Subject: [PATCH v4 00/11] mtd: nand: add Broadcom NAND controller support
Date: Tue, 12 May 2015 17:53:33 -0700	[thread overview]
Message-ID: <1431478424-29230-1-git-send-email-computersforpeace@gmail.com> (raw)

Hi,

This is the fourth (and final?) version of support for the Broadcom BCM7xxx
Set-Top Box NAND controller. This controller has been used in a variety of
Broadcom SoCs.

Tested to work on Cygnus, BCM7445, and BCM63138.

Summary changelog:

v1 -> v2:
 * add NAND to DTS for BCM7445 / BCM97445SVMB
 * rename DT binding file to have 'brcm,' prefix
 * catch DMA mapping errors
 * fixup timeout / error messages (hex, remove misleading info)
 * MODULE_LICENSE("GPL v2")
 * fix incorrect comments
 * print why we fail, when checking for supported controller revisions
 * disable prefetch when using Flash DMA (see FIXME); will re-enable once we
   get a good erased-page verification scheme merged

v2 -> v3:
 * rebase to v4.1-rc1
 * add SoC-specific infrastructure, to help support other SoCs:
   - add BCM63138 support
   - add iProc/Cygnus support
 * disable prefetch on v6.1

v3 -> v4:
 * move to brcmnand/ subdirectory
 * add MAINTAINERS entry
 * fixup endianness issues (only use __raw_xxx on MIPS BE)
 * split core NAND support into library, with tiny platform drivers for STB
   (BCM7xxx), iProc, and BCM63138
 * restructure DT binding, so all SoC extras become part of main controller
   node

Brian Norris (10):
  Documentation: devicetree: add binding doc for Broadcom NAND
    controller
  mtd: nand: add NAND driver "library" for Broadcom STB NAND controller
  mtd: brcmnand: add support for STB chips
  ARM: bcm7445: add NAND to DTS
  Documentation: devicetree: brcmstb_nand: add BCM63138 and Cygnus/iProc
  mtd: brcmnand: add extra SoC support to library
  mtd: brcmnand: add support for Broadcom's IPROC family
  mtd: brcmnand: add BCM63138 support
  ARM: bcm63138: add NAND DT support
  MAINTAINERS: add entry for new brcmnand/ directory

Ray Jui (1):
  ARM: dts: cygnus: Enable NAND support for Cygnus

 .../devicetree/bindings/mtd/brcm,brcmnand.txt      |  150 ++
 MAINTAINERS                                        |    6 +
 arch/arm/boot/dts/bcm-cygnus.dtsi                  |   12 +
 arch/arm/boot/dts/bcm63138.dtsi                    |   11 +
 arch/arm/boot/dts/bcm7445-bcm97445svmb.dts         |   23 +
 arch/arm/boot/dts/bcm7445.dtsi                     |   22 +
 arch/arm/boot/dts/bcm958300k.dts                   |   16 +
 arch/arm/boot/dts/bcm963138dvt.dts                 |   12 +
 drivers/mtd/nand/Kconfig                           |    8 +
 drivers/mtd/nand/Makefile                          |    1 +
 drivers/mtd/nand/brcmnand/Makefile                 |    6 +
 drivers/mtd/nand/brcmnand/bcm63138_nand.c          |  111 +
 drivers/mtd/nand/brcmnand/brcmnand.c               | 2246 ++++++++++++++++++++
 drivers/mtd/nand/brcmnand/brcmnand.h               |   73 +
 drivers/mtd/nand/brcmnand/brcmstb_nand.c           |   44 +
 drivers/mtd/nand/brcmnand/iproc_nand.c             |  150 ++
 16 files changed, 2891 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
 create mode 100644 drivers/mtd/nand/brcmnand/Makefile
 create mode 100644 drivers/mtd/nand/brcmnand/bcm63138_nand.c
 create mode 100644 drivers/mtd/nand/brcmnand/brcmnand.c
 create mode 100644 drivers/mtd/nand/brcmnand/brcmnand.h
 create mode 100644 drivers/mtd/nand/brcmnand/brcmstb_nand.c
 create mode 100644 drivers/mtd/nand/brcmnand/iproc_nand.c

-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Brian Norris <computersforpeace@gmail.com>
To: linux-mtd@lists.infradead.org
Cc: "Brian Norris" <computersforpeace@gmail.com>,
	"Dmitry Torokhov" <dtor@google.com>,
	"Anatol Pomazao" <anatol@google.com>,
	"Ray Jui" <rjui@broadcom.com>,
	"Corneliu Doban" <cdoban@broadcom.com>,
	"Jonathan Richardson" <jonathar@broadcom.com>,
	"Scott Branden" <sbranden@broadcom.com>,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"Rafał Miłecki" <zajec5@gmail.com>,
	bcm-kernel-feedback-list@broadcom.com,
	"Dan Ehrenberg" <dehrenberg@chromium.org>,
	"Gregory Fong" <gregory.0xf0@gmail.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Kevin Cernekee" <cernekee@gmail.com>,
	"Arnd Bergmann" <arnd@arndb.de>
Subject: [PATCH v4 00/11] mtd: nand: add Broadcom NAND controller support
Date: Tue, 12 May 2015 17:53:33 -0700	[thread overview]
Message-ID: <1431478424-29230-1-git-send-email-computersforpeace@gmail.com> (raw)

Hi,

This is the fourth (and final?) version of support for the Broadcom BCM7xxx
Set-Top Box NAND controller. This controller has been used in a variety of
Broadcom SoCs.

Tested to work on Cygnus, BCM7445, and BCM63138.

Summary changelog:

v1 -> v2:
 * add NAND to DTS for BCM7445 / BCM97445SVMB
 * rename DT binding file to have 'brcm,' prefix
 * catch DMA mapping errors
 * fixup timeout / error messages (hex, remove misleading info)
 * MODULE_LICENSE("GPL v2")
 * fix incorrect comments
 * print why we fail, when checking for supported controller revisions
 * disable prefetch when using Flash DMA (see FIXME); will re-enable once we
   get a good erased-page verification scheme merged

v2 -> v3:
 * rebase to v4.1-rc1
 * add SoC-specific infrastructure, to help support other SoCs:
   - add BCM63138 support
   - add iProc/Cygnus support
 * disable prefetch on v6.1

v3 -> v4:
 * move to brcmnand/ subdirectory
 * add MAINTAINERS entry
 * fixup endianness issues (only use __raw_xxx on MIPS BE)
 * split core NAND support into library, with tiny platform drivers for STB
   (BCM7xxx), iProc, and BCM63138
 * restructure DT binding, so all SoC extras become part of main controller
   node

Brian Norris (10):
  Documentation: devicetree: add binding doc for Broadcom NAND
    controller
  mtd: nand: add NAND driver "library" for Broadcom STB NAND controller
  mtd: brcmnand: add support for STB chips
  ARM: bcm7445: add NAND to DTS
  Documentation: devicetree: brcmstb_nand: add BCM63138 and Cygnus/iProc
  mtd: brcmnand: add extra SoC support to library
  mtd: brcmnand: add support for Broadcom's IPROC family
  mtd: brcmnand: add BCM63138 support
  ARM: bcm63138: add NAND DT support
  MAINTAINERS: add entry for new brcmnand/ directory

Ray Jui (1):
  ARM: dts: cygnus: Enable NAND support for Cygnus

 .../devicetree/bindings/mtd/brcm,brcmnand.txt      |  150 ++
 MAINTAINERS                                        |    6 +
 arch/arm/boot/dts/bcm-cygnus.dtsi                  |   12 +
 arch/arm/boot/dts/bcm63138.dtsi                    |   11 +
 arch/arm/boot/dts/bcm7445-bcm97445svmb.dts         |   23 +
 arch/arm/boot/dts/bcm7445.dtsi                     |   22 +
 arch/arm/boot/dts/bcm958300k.dts                   |   16 +
 arch/arm/boot/dts/bcm963138dvt.dts                 |   12 +
 drivers/mtd/nand/Kconfig                           |    8 +
 drivers/mtd/nand/Makefile                          |    1 +
 drivers/mtd/nand/brcmnand/Makefile                 |    6 +
 drivers/mtd/nand/brcmnand/bcm63138_nand.c          |  111 +
 drivers/mtd/nand/brcmnand/brcmnand.c               | 2246 ++++++++++++++++++++
 drivers/mtd/nand/brcmnand/brcmnand.h               |   73 +
 drivers/mtd/nand/brcmnand/brcmstb_nand.c           |   44 +
 drivers/mtd/nand/brcmnand/iproc_nand.c             |  150 ++
 16 files changed, 2891 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
 create mode 100644 drivers/mtd/nand/brcmnand/Makefile
 create mode 100644 drivers/mtd/nand/brcmnand/bcm63138_nand.c
 create mode 100644 drivers/mtd/nand/brcmnand/brcmnand.c
 create mode 100644 drivers/mtd/nand/brcmnand/brcmnand.h
 create mode 100644 drivers/mtd/nand/brcmnand/brcmstb_nand.c
 create mode 100644 drivers/mtd/nand/brcmnand/iproc_nand.c

-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Brian Norris <computersforpeace@gmail.com>
To: <linux-mtd@lists.infradead.org>
Cc: "Brian Norris" <computersforpeace@gmail.com>,
	"Dmitry Torokhov" <dtor@google.com>,
	"Anatol Pomazao" <anatol@google.com>,
	"Ray Jui" <rjui@broadcom.com>,
	"Corneliu Doban" <cdoban@broadcom.com>,
	"Jonathan Richardson" <jonathar@broadcom.com>,
	"Scott Branden" <sbranden@broadcom.com>,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"Rafał Miłecki" <zajec5@gmail.com>,
	bcm-kernel-feedback-list@broadcom.com,
	"Dan Ehrenberg" <dehrenberg@chromium.org>,
	"Gregory Fong" <gregory.0xf0@gmail.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Kevin Cernekee" <cernekee@gmail.com>,
	"Arnd Bergmann" <arnd@arndb.de>
Subject: [PATCH v4 00/11] mtd: nand: add Broadcom NAND controller support
Date: Tue, 12 May 2015 17:53:33 -0700	[thread overview]
Message-ID: <1431478424-29230-1-git-send-email-computersforpeace@gmail.com> (raw)

Hi,

This is the fourth (and final?) version of support for the Broadcom BCM7xxx
Set-Top Box NAND controller. This controller has been used in a variety of
Broadcom SoCs.

Tested to work on Cygnus, BCM7445, and BCM63138.

Summary changelog:

v1 -> v2:
 * add NAND to DTS for BCM7445 / BCM97445SVMB
 * rename DT binding file to have 'brcm,' prefix
 * catch DMA mapping errors
 * fixup timeout / error messages (hex, remove misleading info)
 * MODULE_LICENSE("GPL v2")
 * fix incorrect comments
 * print why we fail, when checking for supported controller revisions
 * disable prefetch when using Flash DMA (see FIXME); will re-enable once we
   get a good erased-page verification scheme merged

v2 -> v3:
 * rebase to v4.1-rc1
 * add SoC-specific infrastructure, to help support other SoCs:
   - add BCM63138 support
   - add iProc/Cygnus support
 * disable prefetch on v6.1

v3 -> v4:
 * move to brcmnand/ subdirectory
 * add MAINTAINERS entry
 * fixup endianness issues (only use __raw_xxx on MIPS BE)
 * split core NAND support into library, with tiny platform drivers for STB
   (BCM7xxx), iProc, and BCM63138
 * restructure DT binding, so all SoC extras become part of main controller
   node

Brian Norris (10):
  Documentation: devicetree: add binding doc for Broadcom NAND
    controller
  mtd: nand: add NAND driver "library" for Broadcom STB NAND controller
  mtd: brcmnand: add support for STB chips
  ARM: bcm7445: add NAND to DTS
  Documentation: devicetree: brcmstb_nand: add BCM63138 and Cygnus/iProc
  mtd: brcmnand: add extra SoC support to library
  mtd: brcmnand: add support for Broadcom's IPROC family
  mtd: brcmnand: add BCM63138 support
  ARM: bcm63138: add NAND DT support
  MAINTAINERS: add entry for new brcmnand/ directory

Ray Jui (1):
  ARM: dts: cygnus: Enable NAND support for Cygnus

 .../devicetree/bindings/mtd/brcm,brcmnand.txt      |  150 ++
 MAINTAINERS                                        |    6 +
 arch/arm/boot/dts/bcm-cygnus.dtsi                  |   12 +
 arch/arm/boot/dts/bcm63138.dtsi                    |   11 +
 arch/arm/boot/dts/bcm7445-bcm97445svmb.dts         |   23 +
 arch/arm/boot/dts/bcm7445.dtsi                     |   22 +
 arch/arm/boot/dts/bcm958300k.dts                   |   16 +
 arch/arm/boot/dts/bcm963138dvt.dts                 |   12 +
 drivers/mtd/nand/Kconfig                           |    8 +
 drivers/mtd/nand/Makefile                          |    1 +
 drivers/mtd/nand/brcmnand/Makefile                 |    6 +
 drivers/mtd/nand/brcmnand/bcm63138_nand.c          |  111 +
 drivers/mtd/nand/brcmnand/brcmnand.c               | 2246 ++++++++++++++++++++
 drivers/mtd/nand/brcmnand/brcmnand.h               |   73 +
 drivers/mtd/nand/brcmnand/brcmstb_nand.c           |   44 +
 drivers/mtd/nand/brcmnand/iproc_nand.c             |  150 ++
 16 files changed, 2891 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
 create mode 100644 drivers/mtd/nand/brcmnand/Makefile
 create mode 100644 drivers/mtd/nand/brcmnand/bcm63138_nand.c
 create mode 100644 drivers/mtd/nand/brcmnand/brcmnand.c
 create mode 100644 drivers/mtd/nand/brcmnand/brcmnand.h
 create mode 100644 drivers/mtd/nand/brcmnand/brcmstb_nand.c
 create mode 100644 drivers/mtd/nand/brcmnand/iproc_nand.c

-- 
1.9.1


             reply	other threads:[~2015-05-13  0:54 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-13  0:53 Brian Norris [this message]
2015-05-13  0:53 ` [PATCH v4 00/11] mtd: nand: add Broadcom NAND controller support Brian Norris
2015-05-13  0:53 ` Brian Norris
2015-05-13  0:53 ` [PATCH v4 01/11] Documentation: devicetree: add binding doc for Broadcom NAND controller Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13  0:53 ` [PATCH v4 02/11] mtd: nand: add NAND driver "library" for Broadcom STB " Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13  0:53 ` [PATCH v4 03/11] mtd: brcmnand: add support for STB chips Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13  0:53 ` [PATCH v4 04/11] ARM: bcm7445: add NAND to DTS Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13  0:53 ` [PATCH v4 05/11] Documentation: devicetree: brcmstb_nand: add BCM63138 and Cygnus/iProc Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13  0:53 ` [PATCH v4 06/11] mtd: brcmnand: add extra SoC support to library Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13  0:53 ` [PATCH v4 07/11] mtd: brcmnand: add support for Broadcom's IPROC family Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13  0:53 ` [PATCH v4 08/11] mtd: brcmnand: add BCM63138 support Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13 10:49   ` Arnd Bergmann
2015-05-13 10:49     ` Arnd Bergmann
2015-05-13 10:49     ` Arnd Bergmann
2015-05-13 19:45     ` Brian Norris
2015-05-13 19:45       ` Brian Norris
2015-05-13 20:02       ` Arnd Bergmann
2015-05-13 20:02         ` Arnd Bergmann
2015-05-13 20:24         ` Brian Norris
2015-05-13 20:24           ` Brian Norris
2015-05-13 20:48           ` Arnd Bergmann
2015-05-13 20:48             ` Arnd Bergmann
2015-05-13  0:53 ` [PATCH v4 09/11] ARM: bcm63138: add NAND DT support Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13  0:53 ` [PATCH v4 10/11] ARM: dts: cygnus: Enable NAND support for Cygnus Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13  0:53 ` [PATCH v4 11/11] MAINTAINERS: add entry for new brcmnand/ directory Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13  0:53   ` Brian Norris
2015-05-13 10:39 ` [PATCH v4 00/11] mtd: nand: add Broadcom NAND controller support Arnd Bergmann
2015-05-13 10:39   ` Arnd Bergmann
2015-05-13 17:56 ` Florian Fainelli
2015-05-13 17:56   ` Florian Fainelli
2015-05-13 17:56   ` Florian Fainelli
2015-05-13 18:14   ` Brian Norris
2015-05-13 18:14     ` Brian Norris
2015-05-13 18:14     ` Brian Norris
2015-05-13 19:08     ` Arnd Bergmann
2015-05-13 19:08       ` Arnd Bergmann
2015-05-13 19:08       ` Arnd Bergmann
2015-05-15 20:23 ` Brian Norris
2015-05-15 20:23   ` Brian Norris

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1431478424-29230-1-git-send-email-computersforpeace@gmail.com \
    --to=computersforpeace@gmail.com \
    --cc=anatol@google.com \
    --cc=arnd@arndb.de \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=cdoban@broadcom.com \
    --cc=cernekee@gmail.com \
    --cc=dehrenberg@chromium.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dtor@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=gregory.0xf0@gmail.com \
    --cc=jonathar@broadcom.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=rjui@broadcom.com \
    --cc=sbranden@broadcom.com \
    --cc=zajec5@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.