From: "Hervé Poussineau" <hpoussin@reactos.org>
To: qemu-devel@nongnu.org
Cc: "Hervé Poussineau" <hpoussin@reactos.org>,
"Leon Alrae" <leon.alrae@imgtec.com>,
"Aurelien Jarno" <aurelien@aurel32.net>
Subject: [Qemu-devel] [PATCH v3 02/16] dma/rc4030: create custom DMA address space
Date: Wed, 3 Jun 2015 22:45:36 +0200 [thread overview]
Message-ID: <1433364350-19380-3-git-send-email-hpoussin@reactos.org> (raw)
In-Reply-To: <1433364350-19380-1-git-send-email-hpoussin@reactos.org>
Add a new memory region in system address space where DMA address space
definition (the 'translation table') belongs, so we can update on the fly
the DMA address space.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
---
hw/dma/rc4030.c | 163 +++++++++++++++++++++++++++++++++++++++++++-------------
1 file changed, 126 insertions(+), 37 deletions(-)
diff --git a/hw/dma/rc4030.c b/hw/dma/rc4030.c
index af26632..84039dc 100644
--- a/hw/dma/rc4030.c
+++ b/hw/dma/rc4030.c
@@ -25,6 +25,7 @@
#include "hw/hw.h"
#include "hw/mips/mips.h"
#include "qemu/timer.h"
+#include "exec/address-spaces.h"
/********************************************************/
/* debug rc4030 */
@@ -47,6 +48,8 @@ do { fprintf(stderr, "rc4030 ERROR: %s: " fmt, __func__ , ## __VA_ARGS__); } whi
/********************************************************/
/* rc4030 emulation */
+#define MAX_TL_ENTRIES 512
+
typedef struct dma_pagetable_entry {
int32_t frame;
int32_t owner;
@@ -96,6 +99,16 @@ typedef struct rc4030State
qemu_irq timer_irq;
qemu_irq jazz_bus_irq;
+ /* biggest translation table */
+ MemoryRegion dma_tt;
+ /* translation table memory region alias, added to system RAM */
+ MemoryRegion dma_tt_alias;
+ /* whole DMA memory region, root of DMA address space */
+ MemoryRegion dma_mr;
+ /* translation table entry aliases, added to DMA memory region */
+ MemoryRegion dma_mrs[MAX_TL_ENTRIES];
+ AddressSpace dma_as;
+
MemoryRegion iomem_chipset;
MemoryRegion iomem_jazzio;
} rc4030State;
@@ -265,6 +278,97 @@ static uint32_t rc4030_readb(void *opaque, hwaddr addr)
return (v >> (8 * (addr & 0x3))) & 0xff;
}
+static void rc4030_dma_as_update_one(rc4030State *s, int index, uint32_t frame)
+{
+ if (index < MAX_TL_ENTRIES) {
+ memory_region_set_enabled(&s->dma_mrs[index], false);
+ }
+
+ if (!frame) {
+ return;
+ }
+
+ if (index >= MAX_TL_ENTRIES) {
+ qemu_log_mask(LOG_UNIMP,
+ "rc4030: trying to use too high "
+ "translation table entry %d (max allowed=%d)",
+ index, MAX_TL_ENTRIES);
+ return;
+ }
+ memory_region_set_alias_offset(&s->dma_mrs[index], frame);
+ memory_region_set_enabled(&s->dma_mrs[index], true);
+}
+
+static void rc4030_dma_tt_write(void *opaque, hwaddr addr, uint64_t data,
+ unsigned int size)
+{
+ rc4030State *s = opaque;
+
+ /* write memory */
+ memcpy(memory_region_get_ram_ptr(&s->dma_tt) + addr, &data, size);
+
+ /* update dma address space (only if frame field has been written) */
+ if (addr % sizeof(dma_pagetable_entry) == 0) {
+ int index = addr / sizeof(dma_pagetable_entry);
+ memory_region_transaction_begin();
+ rc4030_dma_as_update_one(s, index, (uint32_t)data);
+ memory_region_transaction_commit();
+ }
+}
+
+static const MemoryRegionOps rc4030_dma_tt_ops = {
+ .write = rc4030_dma_tt_write,
+ .impl.min_access_size = 4,
+ .impl.max_access_size = 4,
+};
+
+static void rc4030_dma_tt_update(rc4030State *s, uint32_t new_tl_base,
+ uint32_t new_tl_limit)
+{
+ int entries, i;
+ dma_pagetable_entry *dma_tl_contents;
+
+ if (s->dma_tl_limit) {
+ /* write old dma tl table to physical memory */
+ memory_region_del_subregion(get_system_memory(), &s->dma_tt_alias);
+ cpu_physical_memory_write(s->dma_tl_limit & 0x7fffffff,
+ memory_region_get_ram_ptr(&s->dma_tt),
+ memory_region_size(&s->dma_tt_alias));
+ }
+ object_unparent(OBJECT(&s->dma_tt_alias));
+
+ s->dma_tl_base = new_tl_base;
+ s->dma_tl_limit = new_tl_limit;
+ new_tl_base &= 0x7fffffff;
+
+ if (s->dma_tl_limit) {
+ uint64_t dma_tt_size;
+ if (s->dma_tl_limit <= memory_region_size(&s->dma_tt)) {
+ dma_tt_size = s->dma_tl_limit;
+ } else {
+ dma_tt_size = memory_region_size(&s->dma_tt);
+ }
+ memory_region_init_alias(&s->dma_tt_alias, NULL,
+ "dma-table-alias",
+ &s->dma_tt, 0, dma_tt_size);
+ dma_tl_contents = memory_region_get_ram_ptr(&s->dma_tt);
+ cpu_physical_memory_read(new_tl_base, dma_tl_contents, dma_tt_size);
+
+ memory_region_transaction_begin();
+ entries = dma_tt_size / sizeof(dma_pagetable_entry);
+ for (i = 0; i < entries; i++) {
+ rc4030_dma_as_update_one(s, i, dma_tl_contents[i].frame);
+ }
+ memory_region_add_subregion(get_system_memory(), new_tl_base,
+ &s->dma_tt_alias);
+ memory_region_transaction_commit();
+ } else {
+ memory_region_init(&s->dma_tt_alias, NULL,
+ "dma-table-alias", 0);
+ }
+}
+
+
static void rc4030_writel(void *opaque, hwaddr addr, uint32_t val)
{
rc4030State *s = opaque;
@@ -279,11 +383,11 @@ static void rc4030_writel(void *opaque, hwaddr addr, uint32_t val)
break;
/* DMA transl. table base */
case 0x0018:
- s->dma_tl_base = val;
+ rc4030_dma_tt_update(s, val, s->dma_tl_limit);
break;
/* DMA transl. table limit */
case 0x0020:
- s->dma_tl_limit = val;
+ rc4030_dma_tt_update(s, s->dma_tl_base, val);
break;
/* DMA transl. table invalidated */
case 0x0028:
@@ -590,7 +694,7 @@ static void rc4030_reset(void *opaque)
s->invalid_address_register = 0;
memset(s->dma_regs, 0, sizeof(s->dma_regs));
- s->dma_tl_base = s->dma_tl_limit = 0;
+ rc4030_dma_tt_update(s, 0, 0);
s->remote_failed_address = s->memory_failed_address = 0;
s->cache_maint = 0;
@@ -675,39 +779,8 @@ static void rc4030_save(QEMUFile *f, void *opaque)
void rc4030_dma_memory_rw(void *opaque, hwaddr addr, uint8_t *buf, int len, int is_write)
{
rc4030State *s = opaque;
- hwaddr entry_addr;
- hwaddr phys_addr;
- dma_pagetable_entry entry;
- int index;
- int ncpy, i;
-
- i = 0;
- for (;;) {
- if (i == len) {
- break;
- }
-
- ncpy = DMA_PAGESIZE - (addr & (DMA_PAGESIZE - 1));
- if (ncpy > len - i)
- ncpy = len - i;
-
- /* Get DMA translation table entry */
- index = addr / DMA_PAGESIZE;
- if (index >= s->dma_tl_limit / sizeof(dma_pagetable_entry)) {
- break;
- }
- entry_addr = s->dma_tl_base + index * sizeof(dma_pagetable_entry);
- /* XXX: not sure. should we really use only lowest bits? */
- entry_addr &= 0x7fffffff;
- cpu_physical_memory_read(entry_addr, &entry, sizeof(entry));
-
- /* Read/write data at right place */
- phys_addr = entry.frame + (addr & (DMA_PAGESIZE - 1));
- cpu_physical_memory_rw(phys_addr, &buf[i], ncpy, is_write);
-
- i += ncpy;
- addr += ncpy;
- }
+ address_space_rw(&s->dma_as, addr, MEMTXATTRS_UNSPECIFIED, buf, len,
+ is_write);
}
static void rc4030_do_dma(void *opaque, int n, uint8_t *buf, int len, int is_write)
@@ -733,7 +806,8 @@ static void rc4030_do_dma(void *opaque, int n, uint8_t *buf, int len, int is_wri
dma_addr = s->dma_regs[n][DMA_REG_ADDRESS];
/* Read/write data at right place */
- rc4030_dma_memory_rw(opaque, dma_addr, buf, len, is_write);
+ address_space_rw(&s->dma_as, dma_addr, MEMTXATTRS_UNSPECIFIED,
+ buf, len, is_write);
s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_TC_INTR;
s->dma_regs[n][DMA_REG_COUNT] -= len;
@@ -800,6 +874,7 @@ void *rc4030_init(qemu_irq timer, qemu_irq jazz_bus,
MemoryRegion *sysmem)
{
rc4030State *s;
+ int i;
s = g_malloc0(sizeof(rc4030State));
@@ -821,5 +896,19 @@ void *rc4030_init(qemu_irq timer, qemu_irq jazz_bus,
"rc4030.jazzio", 0x00001000);
memory_region_add_subregion(sysmem, 0xf0000000, &s->iomem_jazzio);
+ memory_region_init_rom_device(&s->dma_tt, NULL,
+ &rc4030_dma_tt_ops, s, "dma-table",
+ MAX_TL_ENTRIES * sizeof(dma_pagetable_entry),
+ NULL);
+ memory_region_init(&s->dma_tt_alias, NULL, "dma-table-alias", 0);
+ memory_region_init(&s->dma_mr, NULL, "dma", INT32_MAX);
+ for (i = 0; i < MAX_TL_ENTRIES; ++i) {
+ memory_region_init_alias(&s->dma_mrs[i], NULL, "dma-alias",
+ get_system_memory(), 0, DMA_PAGESIZE);
+ memory_region_set_enabled(&s->dma_mrs[i], false);
+ memory_region_add_subregion(&s->dma_mr, i * DMA_PAGESIZE,
+ &s->dma_mrs[i]);
+ }
+ address_space_init(&s->dma_as, &s->dma_mr, "rc4030-dma");
return s;
}
--
2.1.4
next prev parent reply other threads:[~2015-06-03 20:49 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-03 20:45 [Qemu-devel] [PATCH v3 00/16] net/dp8393x and dma/rc4030 improvements Hervé Poussineau
2015-06-03 20:45 ` [Qemu-devel] [PATCH v3 01/16] mips jazz: compile only in 64 bit Hervé Poussineau
2015-06-03 21:00 ` Aurelien Jarno
2015-06-03 20:45 ` Hervé Poussineau [this message]
2015-06-03 20:45 ` [Qemu-devel] [PATCH v3 03/16] dma/rc4030: use AddressSpace and address_space_rw in users Hervé Poussineau
2015-06-03 20:45 ` [Qemu-devel] [PATCH v3 04/16] dma/rc4030: do not use old_mmio accesses Hervé Poussineau
2015-06-03 20:45 ` [Qemu-devel] [PATCH v3 05/16] dma/rc4030: document register at offset 0x210 Hervé Poussineau
2015-06-03 20:45 ` [Qemu-devel] [PATCH v3 06/16] dma/rc4030: use trace events instead of custom logging Hervé Poussineau
2015-06-03 20:45 ` [Qemu-devel] [PATCH v3 07/16] dma/rc4030: convert to QOM Hervé Poussineau
2015-06-03 20:45 ` [Qemu-devel] [PATCH v3 08/16] net/dp8393x: always calculate proper checksums Hervé Poussineau
2015-06-03 20:45 ` [Qemu-devel] [PATCH v3 09/16] net/dp8393x: do not use old_mmio accesses Hervé Poussineau
2015-06-03 20:45 ` [Qemu-devel] [PATCH v3 10/16] net/dp8393x: use dp8393x_ prefix for all functions Hervé Poussineau
2015-06-03 20:45 ` [Qemu-devel] [PATCH v3 11/16] net/dp8393x: QOM'ify Hervé Poussineau
2015-06-03 20:45 ` [Qemu-devel] [PATCH v3 12/16] net/dp8393x: add PROM to store MAC address Hervé Poussineau
2015-06-03 20:45 ` [Qemu-devel] [PATCH v3 13/16] net/dp8393x: add load/save support Hervé Poussineau
2015-06-03 20:45 ` [Qemu-devel] [PATCH v3 14/16] net/dp8393x: correctly reset in_use field Hervé Poussineau
2015-06-03 20:45 ` [Qemu-devel] [PATCH v3 15/16] net/dp8393x: fix hardware reset Hervé Poussineau
2015-06-03 20:45 ` [Qemu-devel] [PATCH v3 16/16] [RFC] dma/rc4030: do multiple calls to address_space_rw when doing DMA transfers Hervé Poussineau
2015-06-10 12:00 ` Leon Alrae
2015-06-10 19:37 ` Hervé Poussineau
2015-06-10 20:20 ` Peter Maydell
2015-06-10 20:22 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433364350-19380-3-git-send-email-hpoussin@reactos.org \
--to=hpoussin@reactos.org \
--cc=aurelien@aurel32.net \
--cc=leon.alrae@imgtec.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.