From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: Herbert Xu <herbert@gondor.apana.org.au>,
"David S. Miller" <davem@davemloft.net>,
linux-crypto@vger.kernel.org
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>,
Arnaud Ebalard <arno@natisbad.org>,
Tawfik Bayouk <tawfik@marvell.com>,
Lior Amsalem <alior@marvell.com>,
Nadav Haklai <nadavh@marvell.com>,
Eran Ben-Avi <benavi@marvell.com>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Gregory CLEMENT <gregory.clement@free-electrons.com>,
Jason Cooper <jason@lakedaemon.net>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Andrew Lunn <andrew@lunn.ch>, Rob Herring <robh+dt@kernel.org>,
Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Jason Gunthorpe <jgunthorpe@obsidianresearch.com>,
"Imre Kaloz" <kaloz@openwrt.org>
Subject: [PATCH v6 07/14] crypto: marvell/CESA: add Triple-DES support
Date: Wed, 17 Jun 2015 09:45:35 +0200 [thread overview]
Message-ID: <1434527142-3609-8-git-send-email-boris.brezillon@free-electrons.com> (raw)
In-Reply-To: <1434527142-3609-1-git-send-email-boris.brezillon@free-electrons.com>
From: Arnaud Ebalard <arno@natisbad.org>
Add support for Triple-DES operations.
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/crypto/marvell/cesa.c | 2 +
drivers/crypto/marvell/cesa.h | 2 +
drivers/crypto/marvell/cipher.c | 147 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 151 insertions(+)
diff --git a/drivers/crypto/marvell/cesa.c b/drivers/crypto/marvell/cesa.c
index 212840e..c0b1b49 100644
--- a/drivers/crypto/marvell/cesa.c
+++ b/drivers/crypto/marvell/cesa.c
@@ -171,6 +171,8 @@ static void mv_cesa_remove_algs(struct mv_cesa_dev *cesa)
static struct crypto_alg *armada_370_cipher_algs[] = {
&mv_cesa_ecb_des_alg,
&mv_cesa_cbc_des_alg,
+ &mv_cesa_ecb_des3_ede_alg,
+ &mv_cesa_cbc_des3_ede_alg,
&mv_cesa_ecb_aes_alg,
&mv_cesa_cbc_aes_alg,
};
diff --git a/drivers/crypto/marvell/cesa.h b/drivers/crypto/marvell/cesa.h
index 2ee48fe..2e8b7fc 100644
--- a/drivers/crypto/marvell/cesa.h
+++ b/drivers/crypto/marvell/cesa.h
@@ -779,6 +779,8 @@ extern struct ahash_alg mv_ahmac_sha1_alg;
extern struct crypto_alg mv_cesa_ecb_des_alg;
extern struct crypto_alg mv_cesa_cbc_des_alg;
+extern struct crypto_alg mv_cesa_ecb_des3_ede_alg;
+extern struct crypto_alg mv_cesa_cbc_des3_ede_alg;
extern struct crypto_alg mv_cesa_ecb_aes_alg;
extern struct crypto_alg mv_cesa_cbc_aes_alg;
diff --git a/drivers/crypto/marvell/cipher.c b/drivers/crypto/marvell/cipher.c
index ee49f5f..806c43a 100644
--- a/drivers/crypto/marvell/cipher.c
+++ b/drivers/crypto/marvell/cipher.c
@@ -22,6 +22,11 @@ struct mv_cesa_des_ctx {
u8 key[DES_KEY_SIZE];
};
+struct mv_cesa_des3_ctx {
+ struct mv_cesa_ctx base;
+ u8 key[DES3_EDE_KEY_SIZE];
+};
+
struct mv_cesa_aes_ctx {
struct mv_cesa_ctx base;
struct crypto_aes_ctx aes;
@@ -261,6 +266,22 @@ static int mv_cesa_des_setkey(struct crypto_ablkcipher *cipher, const u8 *key,
return 0;
}
+static int mv_cesa_des3_ede_setkey(struct crypto_ablkcipher *cipher,
+ const u8 *key, unsigned int len)
+{
+ struct crypto_tfm *tfm = crypto_ablkcipher_tfm(cipher);
+ struct mv_cesa_des_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ if (len != DES3_EDE_KEY_SIZE) {
+ crypto_ablkcipher_set_flags(cipher, CRYPTO_TFM_RES_BAD_KEY_LEN);
+ return -EINVAL;
+ }
+
+ memcpy(ctx->key, key, DES3_EDE_KEY_SIZE);
+
+ return 0;
+}
+
static int mv_cesa_ablkcipher_dma_req_init(struct ablkcipher_request *req,
const struct mv_cesa_op_ctx *op_templ)
{
@@ -501,6 +522,132 @@ struct crypto_alg mv_cesa_cbc_des_alg = {
},
};
+static int mv_cesa_des3_op(struct ablkcipher_request *req,
+ struct mv_cesa_op_ctx *tmpl)
+{
+ struct mv_cesa_des3_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
+ int ret;
+
+ mv_cesa_update_op_cfg(tmpl, CESA_SA_DESC_CFG_CRYPTM_3DES,
+ CESA_SA_DESC_CFG_CRYPTM_MSK);
+
+ memcpy(tmpl->ctx.blkcipher.key, ctx->key, DES3_EDE_KEY_SIZE);
+
+ ret = mv_cesa_ablkcipher_req_init(req, tmpl);
+ if (ret)
+ return ret;
+
+ ret = mv_cesa_queue_req(&req->base);
+ if (ret && ret != -EINPROGRESS)
+ mv_cesa_ablkcipher_cleanup(req);
+
+ return ret;
+}
+
+static int mv_cesa_ecb_des3_ede_encrypt(struct ablkcipher_request *req)
+{
+ struct mv_cesa_op_ctx tmpl;
+
+ mv_cesa_set_op_cfg(&tmpl,
+ CESA_SA_DESC_CFG_CRYPTCM_ECB |
+ CESA_SA_DESC_CFG_3DES_EDE |
+ CESA_SA_DESC_CFG_DIR_ENC);
+
+ return mv_cesa_des3_op(req, &tmpl);
+}
+
+static int mv_cesa_ecb_des3_ede_decrypt(struct ablkcipher_request *req)
+{
+ struct mv_cesa_op_ctx tmpl;
+
+ mv_cesa_set_op_cfg(&tmpl,
+ CESA_SA_DESC_CFG_CRYPTCM_ECB |
+ CESA_SA_DESC_CFG_3DES_EDE |
+ CESA_SA_DESC_CFG_DIR_DEC);
+
+ return mv_cesa_des3_op(req, &tmpl);
+}
+
+struct crypto_alg mv_cesa_ecb_des3_ede_alg = {
+ .cra_name = "ecb(des3_ede)",
+ .cra_driver_name = "mv-ecb-des3-ede",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+ CRYPTO_ALG_KERN_DRIVER_ONLY | CRYPTO_ALG_ASYNC,
+ .cra_blocksize = DES3_EDE_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct mv_cesa_des3_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_init = mv_cesa_ablkcipher_cra_init,
+ .cra_u = {
+ .ablkcipher = {
+ .min_keysize = DES3_EDE_KEY_SIZE,
+ .max_keysize = DES3_EDE_KEY_SIZE,
+ .ivsize = DES3_EDE_BLOCK_SIZE,
+ .setkey = mv_cesa_des3_ede_setkey,
+ .encrypt = mv_cesa_ecb_des3_ede_encrypt,
+ .decrypt = mv_cesa_ecb_des3_ede_decrypt,
+ },
+ },
+};
+
+static int mv_cesa_cbc_des3_op(struct ablkcipher_request *req,
+ struct mv_cesa_op_ctx *tmpl)
+{
+ memcpy(tmpl->ctx.blkcipher.iv, req->info, DES3_EDE_BLOCK_SIZE);
+
+ return mv_cesa_des3_op(req, tmpl);
+}
+
+static int mv_cesa_cbc_des3_ede_encrypt(struct ablkcipher_request *req)
+{
+ struct mv_cesa_op_ctx tmpl;
+
+ mv_cesa_set_op_cfg(&tmpl,
+ CESA_SA_DESC_CFG_CRYPTCM_CBC |
+ CESA_SA_DESC_CFG_3DES_EDE |
+ CESA_SA_DESC_CFG_DIR_ENC);
+
+ return mv_cesa_cbc_des3_op(req, &tmpl);
+}
+
+static int mv_cesa_cbc_des3_ede_decrypt(struct ablkcipher_request *req)
+{
+ struct mv_cesa_op_ctx tmpl;
+
+ mv_cesa_set_op_cfg(&tmpl,
+ CESA_SA_DESC_CFG_CRYPTCM_CBC |
+ CESA_SA_DESC_CFG_3DES_EDE |
+ CESA_SA_DESC_CFG_DIR_DEC);
+
+ return mv_cesa_cbc_des3_op(req, &tmpl);
+}
+
+struct crypto_alg mv_cesa_cbc_des3_ede_alg = {
+ .cra_name = "cbc(des3_ede)",
+ .cra_driver_name = "mv-cbc-des3-ede",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+ CRYPTO_ALG_KERN_DRIVER_ONLY | CRYPTO_ALG_ASYNC,
+ .cra_blocksize = DES3_EDE_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct mv_cesa_des3_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_init = mv_cesa_ablkcipher_cra_init,
+ .cra_u = {
+ .ablkcipher = {
+ .min_keysize = DES3_EDE_KEY_SIZE,
+ .max_keysize = DES3_EDE_KEY_SIZE,
+ .ivsize = DES3_EDE_BLOCK_SIZE,
+ .setkey = mv_cesa_des3_ede_setkey,
+ .encrypt = mv_cesa_cbc_des3_ede_encrypt,
+ .decrypt = mv_cesa_cbc_des3_ede_decrypt,
+ },
+ },
+};
+
static int mv_cesa_aes_op(struct ablkcipher_request *req,
struct mv_cesa_op_ctx *tmpl)
{
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: boris.brezillon@free-electrons.com (Boris Brezillon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 07/14] crypto: marvell/CESA: add Triple-DES support
Date: Wed, 17 Jun 2015 09:45:35 +0200 [thread overview]
Message-ID: <1434527142-3609-8-git-send-email-boris.brezillon@free-electrons.com> (raw)
In-Reply-To: <1434527142-3609-1-git-send-email-boris.brezillon@free-electrons.com>
From: Arnaud Ebalard <arno@natisbad.org>
Add support for Triple-DES operations.
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/crypto/marvell/cesa.c | 2 +
drivers/crypto/marvell/cesa.h | 2 +
drivers/crypto/marvell/cipher.c | 147 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 151 insertions(+)
diff --git a/drivers/crypto/marvell/cesa.c b/drivers/crypto/marvell/cesa.c
index 212840e..c0b1b49 100644
--- a/drivers/crypto/marvell/cesa.c
+++ b/drivers/crypto/marvell/cesa.c
@@ -171,6 +171,8 @@ static void mv_cesa_remove_algs(struct mv_cesa_dev *cesa)
static struct crypto_alg *armada_370_cipher_algs[] = {
&mv_cesa_ecb_des_alg,
&mv_cesa_cbc_des_alg,
+ &mv_cesa_ecb_des3_ede_alg,
+ &mv_cesa_cbc_des3_ede_alg,
&mv_cesa_ecb_aes_alg,
&mv_cesa_cbc_aes_alg,
};
diff --git a/drivers/crypto/marvell/cesa.h b/drivers/crypto/marvell/cesa.h
index 2ee48fe..2e8b7fc 100644
--- a/drivers/crypto/marvell/cesa.h
+++ b/drivers/crypto/marvell/cesa.h
@@ -779,6 +779,8 @@ extern struct ahash_alg mv_ahmac_sha1_alg;
extern struct crypto_alg mv_cesa_ecb_des_alg;
extern struct crypto_alg mv_cesa_cbc_des_alg;
+extern struct crypto_alg mv_cesa_ecb_des3_ede_alg;
+extern struct crypto_alg mv_cesa_cbc_des3_ede_alg;
extern struct crypto_alg mv_cesa_ecb_aes_alg;
extern struct crypto_alg mv_cesa_cbc_aes_alg;
diff --git a/drivers/crypto/marvell/cipher.c b/drivers/crypto/marvell/cipher.c
index ee49f5f..806c43a 100644
--- a/drivers/crypto/marvell/cipher.c
+++ b/drivers/crypto/marvell/cipher.c
@@ -22,6 +22,11 @@ struct mv_cesa_des_ctx {
u8 key[DES_KEY_SIZE];
};
+struct mv_cesa_des3_ctx {
+ struct mv_cesa_ctx base;
+ u8 key[DES3_EDE_KEY_SIZE];
+};
+
struct mv_cesa_aes_ctx {
struct mv_cesa_ctx base;
struct crypto_aes_ctx aes;
@@ -261,6 +266,22 @@ static int mv_cesa_des_setkey(struct crypto_ablkcipher *cipher, const u8 *key,
return 0;
}
+static int mv_cesa_des3_ede_setkey(struct crypto_ablkcipher *cipher,
+ const u8 *key, unsigned int len)
+{
+ struct crypto_tfm *tfm = crypto_ablkcipher_tfm(cipher);
+ struct mv_cesa_des_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ if (len != DES3_EDE_KEY_SIZE) {
+ crypto_ablkcipher_set_flags(cipher, CRYPTO_TFM_RES_BAD_KEY_LEN);
+ return -EINVAL;
+ }
+
+ memcpy(ctx->key, key, DES3_EDE_KEY_SIZE);
+
+ return 0;
+}
+
static int mv_cesa_ablkcipher_dma_req_init(struct ablkcipher_request *req,
const struct mv_cesa_op_ctx *op_templ)
{
@@ -501,6 +522,132 @@ struct crypto_alg mv_cesa_cbc_des_alg = {
},
};
+static int mv_cesa_des3_op(struct ablkcipher_request *req,
+ struct mv_cesa_op_ctx *tmpl)
+{
+ struct mv_cesa_des3_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
+ int ret;
+
+ mv_cesa_update_op_cfg(tmpl, CESA_SA_DESC_CFG_CRYPTM_3DES,
+ CESA_SA_DESC_CFG_CRYPTM_MSK);
+
+ memcpy(tmpl->ctx.blkcipher.key, ctx->key, DES3_EDE_KEY_SIZE);
+
+ ret = mv_cesa_ablkcipher_req_init(req, tmpl);
+ if (ret)
+ return ret;
+
+ ret = mv_cesa_queue_req(&req->base);
+ if (ret && ret != -EINPROGRESS)
+ mv_cesa_ablkcipher_cleanup(req);
+
+ return ret;
+}
+
+static int mv_cesa_ecb_des3_ede_encrypt(struct ablkcipher_request *req)
+{
+ struct mv_cesa_op_ctx tmpl;
+
+ mv_cesa_set_op_cfg(&tmpl,
+ CESA_SA_DESC_CFG_CRYPTCM_ECB |
+ CESA_SA_DESC_CFG_3DES_EDE |
+ CESA_SA_DESC_CFG_DIR_ENC);
+
+ return mv_cesa_des3_op(req, &tmpl);
+}
+
+static int mv_cesa_ecb_des3_ede_decrypt(struct ablkcipher_request *req)
+{
+ struct mv_cesa_op_ctx tmpl;
+
+ mv_cesa_set_op_cfg(&tmpl,
+ CESA_SA_DESC_CFG_CRYPTCM_ECB |
+ CESA_SA_DESC_CFG_3DES_EDE |
+ CESA_SA_DESC_CFG_DIR_DEC);
+
+ return mv_cesa_des3_op(req, &tmpl);
+}
+
+struct crypto_alg mv_cesa_ecb_des3_ede_alg = {
+ .cra_name = "ecb(des3_ede)",
+ .cra_driver_name = "mv-ecb-des3-ede",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+ CRYPTO_ALG_KERN_DRIVER_ONLY | CRYPTO_ALG_ASYNC,
+ .cra_blocksize = DES3_EDE_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct mv_cesa_des3_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_init = mv_cesa_ablkcipher_cra_init,
+ .cra_u = {
+ .ablkcipher = {
+ .min_keysize = DES3_EDE_KEY_SIZE,
+ .max_keysize = DES3_EDE_KEY_SIZE,
+ .ivsize = DES3_EDE_BLOCK_SIZE,
+ .setkey = mv_cesa_des3_ede_setkey,
+ .encrypt = mv_cesa_ecb_des3_ede_encrypt,
+ .decrypt = mv_cesa_ecb_des3_ede_decrypt,
+ },
+ },
+};
+
+static int mv_cesa_cbc_des3_op(struct ablkcipher_request *req,
+ struct mv_cesa_op_ctx *tmpl)
+{
+ memcpy(tmpl->ctx.blkcipher.iv, req->info, DES3_EDE_BLOCK_SIZE);
+
+ return mv_cesa_des3_op(req, tmpl);
+}
+
+static int mv_cesa_cbc_des3_ede_encrypt(struct ablkcipher_request *req)
+{
+ struct mv_cesa_op_ctx tmpl;
+
+ mv_cesa_set_op_cfg(&tmpl,
+ CESA_SA_DESC_CFG_CRYPTCM_CBC |
+ CESA_SA_DESC_CFG_3DES_EDE |
+ CESA_SA_DESC_CFG_DIR_ENC);
+
+ return mv_cesa_cbc_des3_op(req, &tmpl);
+}
+
+static int mv_cesa_cbc_des3_ede_decrypt(struct ablkcipher_request *req)
+{
+ struct mv_cesa_op_ctx tmpl;
+
+ mv_cesa_set_op_cfg(&tmpl,
+ CESA_SA_DESC_CFG_CRYPTCM_CBC |
+ CESA_SA_DESC_CFG_3DES_EDE |
+ CESA_SA_DESC_CFG_DIR_DEC);
+
+ return mv_cesa_cbc_des3_op(req, &tmpl);
+}
+
+struct crypto_alg mv_cesa_cbc_des3_ede_alg = {
+ .cra_name = "cbc(des3_ede)",
+ .cra_driver_name = "mv-cbc-des3-ede",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+ CRYPTO_ALG_KERN_DRIVER_ONLY | CRYPTO_ALG_ASYNC,
+ .cra_blocksize = DES3_EDE_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct mv_cesa_des3_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_init = mv_cesa_ablkcipher_cra_init,
+ .cra_u = {
+ .ablkcipher = {
+ .min_keysize = DES3_EDE_KEY_SIZE,
+ .max_keysize = DES3_EDE_KEY_SIZE,
+ .ivsize = DES3_EDE_BLOCK_SIZE,
+ .setkey = mv_cesa_des3_ede_setkey,
+ .encrypt = mv_cesa_cbc_des3_ede_encrypt,
+ .decrypt = mv_cesa_cbc_des3_ede_decrypt,
+ },
+ },
+};
+
static int mv_cesa_aes_op(struct ablkcipher_request *req,
struct mv_cesa_op_ctx *tmpl)
{
--
1.9.1
next prev parent reply other threads:[~2015-06-17 7:45 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-17 7:45 [PATCH v6 00/14] crypto: add a new driver for Marvell's CESA Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
2015-06-17 7:45 ` [PATCH v6 01/14] crypto: mv_cesa: document the clocks property Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
2015-06-17 7:45 ` [PATCH v6 04/14] crypto: add a new driver for Marvell's CESA Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
2015-06-17 7:45 ` [PATCH v6 05/14] crypto: marvell/CESA: add TDMA support Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
2015-06-17 9:50 ` Herbert Xu
2015-06-17 9:50 ` Herbert Xu
2015-06-17 11:33 ` Boris Brezillon
2015-06-17 11:33 ` Boris Brezillon
2015-06-17 12:25 ` Herbert Xu
2015-06-17 12:25 ` Herbert Xu
2015-06-17 13:32 ` [PATCH v7 " Boris Brezillon
2015-06-17 13:32 ` Boris Brezillon
2015-06-17 15:08 ` Herbert Xu
2015-06-17 15:08 ` Herbert Xu
[not found] ` <20150617150808.GA14915-lOAM2aK0SrRLBo1qDEOMRrpzq4S04n8Q@public.gmane.org>
2015-06-17 15:34 ` Boris Brezillon
2015-06-17 15:34 ` Boris Brezillon
2015-06-17 15:34 ` Boris Brezillon
2015-06-17 15:58 ` Boris Brezillon
2015-06-17 15:58 ` Boris Brezillon
2015-06-17 15:58 ` Boris Brezillon
2015-06-17 15:58 ` Boris Brezillon
2015-06-18 1:42 ` Herbert Xu
2015-06-18 1:42 ` Herbert Xu
2015-06-18 1:41 ` Herbert Xu
2015-06-18 1:41 ` Herbert Xu
2015-06-18 9:04 ` [PATCH v6 " Russell King - ARM Linux
2015-06-18 9:04 ` Russell King - ARM Linux
2015-06-18 9:04 ` Russell King - ARM Linux
2015-06-18 9:04 ` Russell King - ARM Linux
2015-06-18 9:33 ` Boris Brezillon
2015-06-18 9:33 ` Boris Brezillon
2015-06-18 9:33 ` Boris Brezillon
2015-06-18 9:33 ` Boris Brezillon
2015-06-18 9:48 ` Russell King - ARM Linux
2015-06-18 9:48 ` Russell King - ARM Linux
2015-06-18 9:48 ` Russell King - ARM Linux
2015-06-18 9:48 ` Russell King - ARM Linux
2015-06-18 9:52 ` Boris Brezillon
2015-06-18 9:52 ` Boris Brezillon
2015-06-18 9:52 ` Boris Brezillon
2015-06-18 9:52 ` Boris Brezillon
2015-06-18 9:37 ` Herbert Xu
2015-06-18 9:37 ` Herbert Xu
2015-06-18 9:37 ` Herbert Xu
2015-06-18 9:37 ` Herbert Xu
2015-06-17 7:45 ` [PATCH v6 06/14] crypto: marvell/CESA: add DES support Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
2015-06-18 6:57 ` Boris Brezillon
2015-06-18 6:57 ` Boris Brezillon
2015-06-18 6:57 ` Boris Brezillon
2015-06-18 6:57 ` Boris Brezillon
2015-06-18 7:02 ` Herbert Xu
2015-06-18 7:02 ` Herbert Xu
2015-06-18 7:02 ` Herbert Xu
2015-06-18 7:02 ` Herbert Xu
2015-06-17 7:45 ` Boris Brezillon [this message]
2015-06-17 7:45 ` [PATCH v6 07/14] crypto: marvell/CESA: add Triple-DES support Boris Brezillon
2015-06-17 7:45 ` [PATCH v6 08/14] crypto: marvell/CESA: add MD5 support Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
2015-06-17 7:45 ` [PATCH v6 09/14] crypto: marvell/CESA: add SHA256 support Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
[not found] ` <1434527142-3609-1-git-send-email-boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2015-06-17 7:45 ` [PATCH v6 02/14] crypto: mv_cesa: use gen_pool to reserve the SRAM memory region Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
2015-06-17 7:45 ` [PATCH v6 03/14] crypto: mv_cesa: explicitly define kirkwood and dove compatible strings Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
2015-06-17 7:45 ` [PATCH v6 10/14] crypto: marvell/CESA: add support for all armada SoCs Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
2015-06-17 7:45 ` [PATCH v6 11/14] crypto: marvell/CESA: add allhwsupport module parameter Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
2015-06-17 7:45 ` [PATCH v6 14/14] crypto: marvell/CESA: add DT bindings documentation Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
2015-06-17 7:45 ` [PATCH v6 12/14] crypto: marvell/CESA: add support for Orion SoCs Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
2015-06-17 7:45 ` [PATCH v6 13/14] crypto: marvell/CESA: add support for Kirkwood and Dove SoCs Boris Brezillon
2015-06-17 7:45 ` Boris Brezillon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434527142-3609-8-git-send-email-boris.brezillon@free-electrons.com \
--to=boris.brezillon@free-electrons.com \
--cc=alior@marvell.com \
--cc=andrew@lunn.ch \
--cc=arno@natisbad.org \
--cc=benavi@marvell.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=gregory.clement@free-electrons.com \
--cc=herbert@gondor.apana.org.au \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jason@lakedaemon.net \
--cc=jgunthorpe@obsidianresearch.com \
--cc=kaloz@openwrt.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nadavh@marvell.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=tawfik@marvell.com \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.