All of lore.kernel.org
 help / color / mirror / Atom feed
From: computersforpeace@gmail.com (Brian Norris)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 7/7] ARM: dts: brcmstb: add BCM7445 system PM DT nodes
Date: Thu, 18 Jun 2015 17:11:36 -0700	[thread overview]
Message-ID: <1434672696-13632-8-git-send-email-computersforpeace@gmail.com> (raw)
In-Reply-To: <1434672696-13632-1-git-send-email-computersforpeace@gmail.com>

Need the aon_pm_l2_intc, aon-ctrl, waketimer, boot SRAM, and
memory_controller descriptions.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
 arch/arm/boot/dts/bcm7445.dtsi | 102 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 102 insertions(+)

diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
index 58dcd666257c..5b1aeaf5ac40 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -119,6 +119,30 @@
 			interrupt-names = "hif";
 		};
 
+		aon_pm_l2_intc: interrupt-controller at 410640 {
+			compatible = "brcm,l2-intc";
+			reg = <0x410640 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupts = <GIC_SPI 0x40 0x0>;
+			interrupt-parent = <&gic>;
+			brcm,irq-can-wake;
+		};
+
+		aon-ctrl at 410000 {
+			compatible = "brcm,brcmstb-aon-ctrl";
+			reg = <0x410000 0x200>, <0x410200 0x400>;
+			reg-names = "aon-ctrl", "aon-sram";
+		};
+
+		waketimer at f0417580 {
+			compatible = "brcm,brcmstb-waketimer";
+			reg = <0x417580 0x14>;
+			interrupt-parent = <&aon_pm_l2_intc>;
+			interrupts = <3>;
+			interrupt-names = "timer";
+		};
+
 		nand: nand at 3e2800 {
 			status = "disabled";
 			#address-cells = <1>;
@@ -169,6 +193,84 @@
 		};
 	};
 
+	memory_controllers {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0xf1100000 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		memc at 0 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x80000>;
+
+			memc-ddr at 2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy at 6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+				};
+
+			shimphy at 8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+
+		memc at 1 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x80000>;
+
+			memc-ddr at 2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy at 6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+			};
+
+			shimphy at 8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+
+		memc at 2 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x100000 0x80000>;
+
+			memc-ddr at 2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy at 6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+			};
+
+			shimphy at 8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+	};
+
+	sram at ffe00000 {
+		compatible = "brcm,boot-sram", "mmio-sram";
+		reg = <0x0 0xffe00000 0x0 0x10000>;
+	};
+
 	smpboot {
 		compatible = "brcm,brcmstb-smpboot";
 		syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Brian Norris <computersforpeace@gmail.com>
To: Brian Norris <computersforpeace@gmail.com>,
	Gregory Fong <gregory.0xf0@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	bcm-kernel-feedback-list@broadcom.com
Subject: [PATCH 7/7] ARM: dts: brcmstb: add BCM7445 system PM DT nodes
Date: Thu, 18 Jun 2015 17:11:36 -0700	[thread overview]
Message-ID: <1434672696-13632-8-git-send-email-computersforpeace@gmail.com> (raw)
In-Reply-To: <1434672696-13632-1-git-send-email-computersforpeace@gmail.com>

Need the aon_pm_l2_intc, aon-ctrl, waketimer, boot SRAM, and
memory_controller descriptions.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
 arch/arm/boot/dts/bcm7445.dtsi | 102 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 102 insertions(+)

diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
index 58dcd666257c..5b1aeaf5ac40 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -119,6 +119,30 @@
 			interrupt-names = "hif";
 		};
 
+		aon_pm_l2_intc: interrupt-controller@410640 {
+			compatible = "brcm,l2-intc";
+			reg = <0x410640 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupts = <GIC_SPI 0x40 0x0>;
+			interrupt-parent = <&gic>;
+			brcm,irq-can-wake;
+		};
+
+		aon-ctrl@410000 {
+			compatible = "brcm,brcmstb-aon-ctrl";
+			reg = <0x410000 0x200>, <0x410200 0x400>;
+			reg-names = "aon-ctrl", "aon-sram";
+		};
+
+		waketimer@f0417580 {
+			compatible = "brcm,brcmstb-waketimer";
+			reg = <0x417580 0x14>;
+			interrupt-parent = <&aon_pm_l2_intc>;
+			interrupts = <3>;
+			interrupt-names = "timer";
+		};
+
 		nand: nand@3e2800 {
 			status = "disabled";
 			#address-cells = <1>;
@@ -169,6 +193,84 @@
 		};
 	};
 
+	memory_controllers {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0xf1100000 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		memc@0 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x80000>;
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+				};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+
+		memc@1 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x80000>;
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+
+		memc@2 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x100000 0x80000>;
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+	};
+
+	sram@ffe00000 {
+		compatible = "brcm,boot-sram", "mmio-sram";
+		reg = <0x0 0xffe00000 0x0 0x10000>;
+	};
+
 	smpboot {
 		compatible = "brcm,brcmstb-smpboot";
 		syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
-- 
1.9.1

  parent reply	other threads:[~2015-06-19  0:11 UTC|newest]

Thread overview: 94+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-19  0:11 [PATCH 0/7] soc: brcmstb: add system suspend support for STB SoCs Brian Norris
2015-06-19  0:11 ` Brian Norris
2015-06-19  0:11 ` Brian Norris
2015-06-19  0:11 ` [PATCH 1/7] Documentation: dt: brcmstb: add system PM bindings Brian Norris
2015-06-19  0:11   ` Brian Norris
2015-09-12 19:58   ` Florian Fainelli
2015-09-12 19:58     ` Florian Fainelli
2015-09-12 19:58     ` Florian Fainelli
2015-06-19  0:11 ` [PATCH 2/7] Documentation: dt: brcmstb: add waketimer documentation Brian Norris
2015-06-19  0:11   ` Brian Norris
2015-06-19  2:09   ` Gregory Fong
2015-06-19  2:09     ` Gregory Fong
2015-06-19  2:09     ` Gregory Fong
2015-09-12 19:58   ` Florian Fainelli
2015-09-12 19:58     ` Florian Fainelli
2015-06-19  0:11 ` [PATCH 3/7] soc: add stubs for brcmstb SoC's Brian Norris
2015-06-19  0:11   ` Brian Norris
2015-09-12 20:16   ` Florian Fainelli
2015-09-12 20:16     ` Florian Fainelli
2015-09-12 20:16     ` Florian Fainelli
2015-06-19  0:11 ` [PATCH 4/7] soc: brcmstb: add PM suspend/resume support (S2/S3/S5) Brian Norris
2015-06-19  0:11   ` Brian Norris
2015-09-12 20:23   ` Florian Fainelli
2015-09-12 20:23     ` Florian Fainelli
2015-09-12 20:23     ` Florian Fainelli
2015-06-19  0:11 ` [PATCH 5/7] soc: brcmstb: add wake-timer driver Brian Norris
2015-06-19  0:11   ` Brian Norris
2015-06-19  2:20   ` Gregory Fong
2015-06-19  2:20     ` Gregory Fong
2015-06-19  2:20     ` Gregory Fong
2015-06-19 17:36     ` Brian Norris
2015-06-19 17:36       ` Brian Norris
2015-06-19 17:36       ` Brian Norris
2015-09-12 20:00   ` Florian Fainelli
2015-09-12 20:00     ` Florian Fainelli
2015-09-12 20:00     ` Florian Fainelli
2015-06-19  0:11 ` [PATCH 6/7] ARM: brcmstb: mask GIC IRQs on suspend Brian Norris
2015-06-19  0:11   ` Brian Norris
2015-06-19  1:48   ` Gregory Fong
2015-06-19  1:48     ` Gregory Fong
2015-09-12 19:53   ` Florian Fainelli
2015-09-12 19:53     ` Florian Fainelli
2015-09-12 19:53     ` Florian Fainelli
2015-09-14 17:29     ` Brian Norris
2015-09-14 17:29       ` Brian Norris
2015-09-14 17:29       ` Brian Norris
2015-09-14 17:42     ` Brian Norris
2015-09-14 17:42       ` Brian Norris
2015-09-14 17:42       ` Brian Norris
2015-09-14 17:43       ` Florian Fainelli
2015-09-14 17:43         ` Florian Fainelli
2015-09-14 17:43         ` Florian Fainelli
2015-06-19  0:11 ` Brian Norris [this message]
2015-06-19  0:11   ` [PATCH 7/7] ARM: dts: brcmstb: add BCM7445 system PM DT nodes Brian Norris
2015-09-12 19:58   ` Florian Fainelli
2015-09-12 19:58     ` Florian Fainelli
2015-09-12 19:58     ` Florian Fainelli
2015-06-19  3:20 ` [PATCH 0/7] soc: brcmstb: add system suspend support for STB SoCs Gregory Fong
2015-06-19  3:20   ` Gregory Fong
2015-06-19  3:20   ` Gregory Fong
2015-06-19 22:41   ` Brian Norris
2015-06-19 22:41     ` Brian Norris
2015-06-19 22:41     ` Brian Norris
2015-06-19 22:55     ` Brian Norris
2015-06-19 22:55       ` Brian Norris
2015-06-19 22:55       ` Brian Norris
2015-06-19 23:26     ` [PATCH 1/2] genirq: add chip_{suspend,resume} PM support to irq_chip Brian Norris
2015-06-19 23:26       ` Brian Norris
2015-06-19 23:26       ` Brian Norris
2015-06-19 23:26       ` [PATCH 2/2] IRQCHIP: bcm7120-l2: perform suspend/resume even without installed child IRQs Brian Norris
2015-06-19 23:26         ` Brian Norris
2015-06-19 23:26         ` Brian Norris
2015-06-19 23:39         ` Florian Fainelli
2015-06-19 23:39           ` Florian Fainelli
2015-06-19 23:38       ` [PATCH 1/2] genirq: add chip_{suspend,resume} PM support to irq_chip Florian Fainelli
2015-06-19 23:38         ` Florian Fainelli
2015-06-20 14:11       ` Thomas Gleixner
2015-06-20 14:11         ` Thomas Gleixner
2015-07-21 18:24         ` Florian Fainelli
2015-07-21 21:23           ` Thomas Gleixner
2015-07-21 21:26             ` Florian Fainelli
2015-07-21 21:26               ` Florian Fainelli
2015-07-21 21:58               ` Thomas Gleixner
2015-07-22 23:28                 ` Brian Norris
2015-07-21 21:36           ` Brian Norris
2015-07-22 23:21       ` [PATCH v2 " Brian Norris
2015-07-22 23:21         ` [PATCH v2 2/2] IRQCHIP: bcm7120-l2: perform suspend/resume even without installed child IRQs Brian Norris
2015-07-27  6:15           ` [tip:irq/core] irqchip/bcm7120-l2: Perform suspend/ resume " tip-bot for Brian Norris
2015-07-27  6:14         ` [tip:irq/core] genirq: Add chip_[suspend|resume] PM support to irq_chip tip-bot for Brian Norris
2015-06-22 19:47 ` [PATCH 0/7] soc: brcmstb: add system suspend support for STB SoCs Brian Norris
2015-06-22 19:47   ` Brian Norris
2015-06-22 19:47   ` Brian Norris
2015-06-24  4:47   ` Florian Fainelli
2015-06-24  4:47     ` Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1434672696-13632-8-git-send-email-computersforpeace@gmail.com \
    --to=computersforpeace@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.