* [lm-sensors] [PATCH V3 0/3] hwmon:f71882fg add new Fintek SuperIO support @ 2015-07-07 8:22 ` Peter Hung 0 siblings, 0 replies; 10+ messages in thread From: Peter Hung @ 2015-07-07 8:22 UTC (permalink / raw) To: jdelvare, linux Cc: lm-sensors, linux-kernel, tom_tsai, peter_hong, Peter Hung The first patch will add Fintek F81866/F71868 SuperIO with H/W monitor function to f71882fg.c. But some F81866 functional address is differ from F71882fg. The following 2 patches will fix this problem. The test report is upload to following link. If I lost something, with test, please let me know. I'll append it to the report. Here is F81866 on customer MB report: https://drive.google.com/file/d/0B8vRwwYO7aMFUmliSFVWVVRUaTA/view?pli=1 Cause we had no F71868 MB currently, we just check and mapping register to driver. Changelog: V3 1. Fix fatal compile error. (Thanks to Guenter Roeck) 2. Fix array size and content not match error. (Thanks to Dan Carpenter) V2 1. Fix comments by Guenter Roeck <linux@roeck-us.net> all newer add IC should keep chip IDs in numeric order. Peter Hung (3): hwmon:f71882fg add f81866/f71868 SuperIO support hwmon:f71882fg fix f81866a temp/beep setting hwmon:f71882fg fix f81866a voltage protection drivers/hwmon/f71882fg.c | 163 +++++++++++++++++++++++++++++++++++++---------- 1 file changed, 131 insertions(+), 32 deletions(-) -- 1.9.1 _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH V3 0/3] hwmon:f71882fg add new Fintek SuperIO support @ 2015-07-07 8:22 ` Peter Hung 0 siblings, 0 replies; 10+ messages in thread From: Peter Hung @ 2015-07-07 8:22 UTC (permalink / raw) To: jdelvare, linux Cc: lm-sensors, linux-kernel, tom_tsai, peter_hong, Peter Hung The first patch will add Fintek F81866/F71868 SuperIO with H/W monitor function to f71882fg.c. But some F81866 functional address is differ from F71882fg. The following 2 patches will fix this problem. The test report is upload to following link. If I lost something, with test, please let me know. I'll append it to the report. Here is F81866 on customer MB report: https://drive.google.com/file/d/0B8vRwwYO7aMFUmliSFVWVVRUaTA/view?pli=1 Cause we had no F71868 MB currently, we just check and mapping register to driver. Changelog: V3 1. Fix fatal compile error. (Thanks to Guenter Roeck) 2. Fix array size and content not match error. (Thanks to Dan Carpenter) V2 1. Fix comments by Guenter Roeck <linux@roeck-us.net> all newer add IC should keep chip IDs in numeric order. Peter Hung (3): hwmon:f71882fg add f81866/f71868 SuperIO support hwmon:f71882fg fix f81866a temp/beep setting hwmon:f71882fg fix f81866a voltage protection drivers/hwmon/f71882fg.c | 163 +++++++++++++++++++++++++++++++++++++---------- 1 file changed, 131 insertions(+), 32 deletions(-) -- 1.9.1 ^ permalink raw reply [flat|nested] 10+ messages in thread
* [lm-sensors] [PATCH V3 1/3] hwmon:f71882fg add f81866/f71868 SuperIO support 2015-07-07 8:22 ` Peter Hung @ 2015-07-07 8:22 ` Peter Hung -1 siblings, 0 replies; 10+ messages in thread From: Peter Hung @ 2015-07-07 8:22 UTC (permalink / raw) To: jdelvare, linux Cc: lm-sensors, linux-kernel, tom_tsai, peter_hong, Peter Hung Add New Fintek SuperIO F81866(0x1010) & F71868(0x1106) with H/W Monitor functions. We increased F71882FG_MAX_INS from 9 to 10 to read F71868 10 voltage sets. Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> --- drivers/hwmon/f71882fg.c | 53 ++++++++++++++++++++++++++++++++++-------------- 1 file changed, 38 insertions(+), 15 deletions(-) diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index 2e5c6f4..3a7185a 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -51,6 +51,7 @@ #define SIO_F71808A_ID 0x1001 /* Chipset ID */ #define SIO_F71858_ID 0x0507 /* Chipset ID */ #define SIO_F71862_ID 0x0601 /* Chipset ID */ +#define SIO_F71868_ID 0x1106 /* Chipset ID */ #define SIO_F71869_ID 0x0814 /* Chipset ID */ #define SIO_F71869A_ID 0x1007 /* Chipset ID */ #define SIO_F71882_ID 0x0541 /* Chipset ID */ @@ -59,6 +60,7 @@ #define SIO_F71889A_ID 0x1005 /* Chipset ID */ #define SIO_F8000_ID 0x0581 /* Chipset ID */ #define SIO_F81865_ID 0x0704 /* Chipset ID */ +#define SIO_F81866_ID 0x1010 /* Chipset ID */ #define REGION_LENGTH 8 #define ADDR_REG_OFFSET 5 @@ -101,7 +103,7 @@ #define F71882FG_REG_START 0x01 -#define F71882FG_MAX_INS 9 +#define F71882FG_MAX_INS 10 #define FAN_MIN_DETECT 366 /* Lowest detectable fanspeed */ @@ -109,14 +111,15 @@ static unsigned short force_id; module_param(force_id, ushort, 0); MODULE_PARM_DESC(force_id, "Override the detected device ID"); -enum chips { f71808e, f71808a, f71858fg, f71862fg, f71869, f71869a, f71882fg, - f71889fg, f71889ed, f71889a, f8000, f81865f }; +enum chips { f71808e, f71808a, f71858fg, f71862fg, f71868a, f71869, f71869a, + f71882fg, f71889fg, f71889ed, f71889a, f8000, f81865f, f81866a}; static const char *const f71882fg_names[] = { "f71808e", "f71808a", "f71858fg", "f71862fg", + "f71868a", "f71869", /* Both f71869f and f71869e, reg. compatible and same id */ "f71869a", "f71882fg", @@ -125,21 +128,24 @@ static const char *const f71882fg_names[] = { "f71889a", "f8000", "f81865f", + "f81866a", }; static const char f71882fg_has_in[][F71882FG_MAX_INS] = { - [f71808e] = { 1, 1, 1, 1, 1, 1, 0, 1, 1 }, - [f71808a] = { 1, 1, 1, 1, 0, 0, 0, 1, 1 }, - [f71858fg] = { 1, 1, 1, 0, 0, 0, 0, 0, 0 }, - [f71862fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, - [f71869] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, - [f71869a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, - [f71882fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, - [f71889fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, - [f71889ed] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, - [f71889a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, - [f8000] = { 1, 1, 1, 0, 0, 0, 0, 0, 0 }, - [f81865f] = { 1, 1, 1, 1, 1, 1, 1, 0, 0 }, + [f71808e] = { 1, 1, 1, 1, 1, 1, 0, 1, 1, 0 }, + [f71808a] = { 1, 1, 1, 1, 0, 0, 0, 1, 1, 0 }, + [f71858fg] = { 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 }, + [f71862fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 }, + [f71868a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 }, + [f71869] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 }, + [f71869a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 }, + [f71882fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 }, + [f71889fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 }, + [f71889ed] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 }, + [f71889a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 }, + [f8000] = { 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 }, + [f81865f] = { 1, 1, 1, 1, 1, 1, 1, 0, 0, 0 }, + [f81866a] = { 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 }, }; static const char f71882fg_has_in1_alarm[] = { @@ -147,6 +153,7 @@ static const char f71882fg_has_in1_alarm[] = { [f71808a] = 0, [f71858fg] = 0, [f71862fg] = 0, + [f71868a] = 0, [f71869] = 0, [f71869a] = 0, [f71882fg] = 1, @@ -155,6 +162,7 @@ static const char f71882fg_has_in1_alarm[] = { [f71889a] = 1, [f8000] = 0, [f81865f] = 1, + [f81866a] = 1, }; static const char f71882fg_fan_has_beep[] = { @@ -162,6 +170,7 @@ static const char f71882fg_fan_has_beep[] = { [f71808a] = 0, [f71858fg] = 0, [f71862fg] = 1, + [f71868a] = 1, [f71869] = 1, [f71869a] = 1, [f71882fg] = 1, @@ -170,6 +179,7 @@ static const char f71882fg_fan_has_beep[] = { [f71889a] = 1, [f8000] = 0, [f81865f] = 1, + [f81866a] = 1, }; static const char f71882fg_nr_fans[] = { @@ -177,6 +187,7 @@ static const char f71882fg_nr_fans[] = { [f71808a] = 2, /* +1 fan which is monitor + simple pwm only */ [f71858fg] = 3, [f71862fg] = 3, + [f71868a] = 3, [f71869] = 3, [f71869a] = 3, [f71882fg] = 4, @@ -185,6 +196,7 @@ static const char f71882fg_nr_fans[] = { [f71889a] = 3, [f8000] = 3, /* +1 fan which is monitor only */ [f81865f] = 2, + [f81866a] = 3, }; static const char f71882fg_temp_has_beep[] = { @@ -192,6 +204,7 @@ static const char f71882fg_temp_has_beep[] = { [f71808a] = 1, [f71858fg] = 0, [f71862fg] = 1, + [f71868a] = 1, [f71869] = 1, [f71869a] = 1, [f71882fg] = 1, @@ -200,6 +213,7 @@ static const char f71882fg_temp_has_beep[] = { [f71889a] = 1, [f8000] = 0, [f81865f] = 1, + [f81866a] = 1, }; static const char f71882fg_nr_temps[] = { @@ -207,6 +221,7 @@ static const char f71882fg_nr_temps[] = { [f71808a] = 2, [f71858fg] = 3, [f71862fg] = 3, + [f71868a] = 3, [f71869] = 3, [f71869a] = 3, [f71882fg] = 3, @@ -215,6 +230,7 @@ static const char f71882fg_nr_temps[] = { [f71889a] = 3, [f8000] = 3, [f81865f] = 2, + [f81866a] = 3, }; static struct platform_device *f71882fg_pdev; @@ -531,6 +547,7 @@ static struct sensor_device_attribute_2 fxxxx_in_attr[] = { SENSOR_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 0, 6), SENSOR_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 0, 7), SENSOR_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 0, 8), + SENSOR_ATTR_2(in9_input, S_IRUGO, show_in, NULL, 0, 9), }; /* For models with in1 alarm capability */ @@ -2551,6 +2568,9 @@ static int __init f71882fg_find(int sioaddr, struct f71882fg_sio_data *sio_data) case SIO_F71862_ID: sio_data->type = f71862fg; break; + case SIO_F71868_ID: + sio_data->type = f71868a; + break; case SIO_F71869_ID: sio_data->type = f71869; break; @@ -2575,6 +2595,9 @@ static int __init f71882fg_find(int sioaddr, struct f71882fg_sio_data *sio_data) case SIO_F81865_ID: sio_data->type = f81865f; break; + case SIO_F81866_ID: + sio_data->type = f81866a; + break; default: pr_info("Unsupported Fintek device: %04x\n", (unsigned int)devid); -- 1.9.1 _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH V3 1/3] hwmon:f71882fg add f81866/f71868 SuperIO support @ 2015-07-07 8:22 ` Peter Hung 0 siblings, 0 replies; 10+ messages in thread From: Peter Hung @ 2015-07-07 8:22 UTC (permalink / raw) To: jdelvare, linux Cc: lm-sensors, linux-kernel, tom_tsai, peter_hong, Peter Hung Add New Fintek SuperIO F81866(0x1010) & F71868(0x1106) with H/W Monitor functions. We increased F71882FG_MAX_INS from 9 to 10 to read F71868 10 voltage sets. Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> --- drivers/hwmon/f71882fg.c | 53 ++++++++++++++++++++++++++++++++++-------------- 1 file changed, 38 insertions(+), 15 deletions(-) diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index 2e5c6f4..3a7185a 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -51,6 +51,7 @@ #define SIO_F71808A_ID 0x1001 /* Chipset ID */ #define SIO_F71858_ID 0x0507 /* Chipset ID */ #define SIO_F71862_ID 0x0601 /* Chipset ID */ +#define SIO_F71868_ID 0x1106 /* Chipset ID */ #define SIO_F71869_ID 0x0814 /* Chipset ID */ #define SIO_F71869A_ID 0x1007 /* Chipset ID */ #define SIO_F71882_ID 0x0541 /* Chipset ID */ @@ -59,6 +60,7 @@ #define SIO_F71889A_ID 0x1005 /* Chipset ID */ #define SIO_F8000_ID 0x0581 /* Chipset ID */ #define SIO_F81865_ID 0x0704 /* Chipset ID */ +#define SIO_F81866_ID 0x1010 /* Chipset ID */ #define REGION_LENGTH 8 #define ADDR_REG_OFFSET 5 @@ -101,7 +103,7 @@ #define F71882FG_REG_START 0x01 -#define F71882FG_MAX_INS 9 +#define F71882FG_MAX_INS 10 #define FAN_MIN_DETECT 366 /* Lowest detectable fanspeed */ @@ -109,14 +111,15 @@ static unsigned short force_id; module_param(force_id, ushort, 0); MODULE_PARM_DESC(force_id, "Override the detected device ID"); -enum chips { f71808e, f71808a, f71858fg, f71862fg, f71869, f71869a, f71882fg, - f71889fg, f71889ed, f71889a, f8000, f81865f }; +enum chips { f71808e, f71808a, f71858fg, f71862fg, f71868a, f71869, f71869a, + f71882fg, f71889fg, f71889ed, f71889a, f8000, f81865f, f81866a}; static const char *const f71882fg_names[] = { "f71808e", "f71808a", "f71858fg", "f71862fg", + "f71868a", "f71869", /* Both f71869f and f71869e, reg. compatible and same id */ "f71869a", "f71882fg", @@ -125,21 +128,24 @@ static const char *const f71882fg_names[] = { "f71889a", "f8000", "f81865f", + "f81866a", }; static const char f71882fg_has_in[][F71882FG_MAX_INS] = { - [f71808e] = { 1, 1, 1, 1, 1, 1, 0, 1, 1 }, - [f71808a] = { 1, 1, 1, 1, 0, 0, 0, 1, 1 }, - [f71858fg] = { 1, 1, 1, 0, 0, 0, 0, 0, 0 }, - [f71862fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, - [f71869] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, - [f71869a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, - [f71882fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, - [f71889fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, - [f71889ed] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, - [f71889a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, - [f8000] = { 1, 1, 1, 0, 0, 0, 0, 0, 0 }, - [f81865f] = { 1, 1, 1, 1, 1, 1, 1, 0, 0 }, + [f71808e] = { 1, 1, 1, 1, 1, 1, 0, 1, 1, 0 }, + [f71808a] = { 1, 1, 1, 1, 0, 0, 0, 1, 1, 0 }, + [f71858fg] = { 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 }, + [f71862fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 }, + [f71868a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 }, + [f71869] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 }, + [f71869a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 }, + [f71882fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 }, + [f71889fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 }, + [f71889ed] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 }, + [f71889a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 }, + [f8000] = { 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 }, + [f81865f] = { 1, 1, 1, 1, 1, 1, 1, 0, 0, 0 }, + [f81866a] = { 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 }, }; static const char f71882fg_has_in1_alarm[] = { @@ -147,6 +153,7 @@ static const char f71882fg_has_in1_alarm[] = { [f71808a] = 0, [f71858fg] = 0, [f71862fg] = 0, + [f71868a] = 0, [f71869] = 0, [f71869a] = 0, [f71882fg] = 1, @@ -155,6 +162,7 @@ static const char f71882fg_has_in1_alarm[] = { [f71889a] = 1, [f8000] = 0, [f81865f] = 1, + [f81866a] = 1, }; static const char f71882fg_fan_has_beep[] = { @@ -162,6 +170,7 @@ static const char f71882fg_fan_has_beep[] = { [f71808a] = 0, [f71858fg] = 0, [f71862fg] = 1, + [f71868a] = 1, [f71869] = 1, [f71869a] = 1, [f71882fg] = 1, @@ -170,6 +179,7 @@ static const char f71882fg_fan_has_beep[] = { [f71889a] = 1, [f8000] = 0, [f81865f] = 1, + [f81866a] = 1, }; static const char f71882fg_nr_fans[] = { @@ -177,6 +187,7 @@ static const char f71882fg_nr_fans[] = { [f71808a] = 2, /* +1 fan which is monitor + simple pwm only */ [f71858fg] = 3, [f71862fg] = 3, + [f71868a] = 3, [f71869] = 3, [f71869a] = 3, [f71882fg] = 4, @@ -185,6 +196,7 @@ static const char f71882fg_nr_fans[] = { [f71889a] = 3, [f8000] = 3, /* +1 fan which is monitor only */ [f81865f] = 2, + [f81866a] = 3, }; static const char f71882fg_temp_has_beep[] = { @@ -192,6 +204,7 @@ static const char f71882fg_temp_has_beep[] = { [f71808a] = 1, [f71858fg] = 0, [f71862fg] = 1, + [f71868a] = 1, [f71869] = 1, [f71869a] = 1, [f71882fg] = 1, @@ -200,6 +213,7 @@ static const char f71882fg_temp_has_beep[] = { [f71889a] = 1, [f8000] = 0, [f81865f] = 1, + [f81866a] = 1, }; static const char f71882fg_nr_temps[] = { @@ -207,6 +221,7 @@ static const char f71882fg_nr_temps[] = { [f71808a] = 2, [f71858fg] = 3, [f71862fg] = 3, + [f71868a] = 3, [f71869] = 3, [f71869a] = 3, [f71882fg] = 3, @@ -215,6 +230,7 @@ static const char f71882fg_nr_temps[] = { [f71889a] = 3, [f8000] = 3, [f81865f] = 2, + [f81866a] = 3, }; static struct platform_device *f71882fg_pdev; @@ -531,6 +547,7 @@ static struct sensor_device_attribute_2 fxxxx_in_attr[] = { SENSOR_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 0, 6), SENSOR_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 0, 7), SENSOR_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 0, 8), + SENSOR_ATTR_2(in9_input, S_IRUGO, show_in, NULL, 0, 9), }; /* For models with in1 alarm capability */ @@ -2551,6 +2568,9 @@ static int __init f71882fg_find(int sioaddr, struct f71882fg_sio_data *sio_data) case SIO_F71862_ID: sio_data->type = f71862fg; break; + case SIO_F71868_ID: + sio_data->type = f71868a; + break; case SIO_F71869_ID: sio_data->type = f71869; break; @@ -2575,6 +2595,9 @@ static int __init f71882fg_find(int sioaddr, struct f71882fg_sio_data *sio_data) case SIO_F81865_ID: sio_data->type = f81865f; break; + case SIO_F81866_ID: + sio_data->type = f81866a; + break; default: pr_info("Unsupported Fintek device: %04x\n", (unsigned int)devid); -- 1.9.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [lm-sensors] [PATCH V3 2/3] hwmon:f71882fg fix f81866a temp/beep setting 2015-07-07 8:22 ` Peter Hung @ 2015-07-07 8:22 ` Peter Hung -1 siblings, 0 replies; 10+ messages in thread From: Peter Hung @ 2015-07-07 8:22 UTC (permalink / raw) To: jdelvare, linux Cc: lm-sensors, linux-kernel, tom_tsai, peter_hong, Peter Hung The temperature value of Fintek F81866 is the same with f71882fg. It located with 0x6c + 2*(nr), others located with 0x6c + 2*(nr+1). We change the rule in f71882fg_probe(), If type = f71858fg/f8000/f81866a. the temp_start will set to 0, others are 1. The F81866 over-temperature beep setting is not the same with f71882fg too. They are using the same address 63H, but F81866 is using bit 0/1/2 & 4/5/6, others are using bit 1/2/3 & 5/6/7, So we copy from fxxxx_temp_beep_attr[] to f81866_temp_beep_attr and change bit setting. Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> --- drivers/hwmon/f71882fg.c | 60 +++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 52 insertions(+), 8 deletions(-) diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index 3a7185a..79f1f50 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -506,6 +506,23 @@ static struct sensor_device_attribute_2 fxxxx_temp_beep_attr[3][2] = { { store_temp_beep, 0, 7), } }; +static struct sensor_device_attribute_2 f81866_temp_beep_attr[3][2] = { { + SENSOR_ATTR_2(temp1_max_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 0), + SENSOR_ATTR_2(temp1_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 4), +}, { + SENSOR_ATTR_2(temp2_max_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 1), + SENSOR_ATTR_2(temp2_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 5), +}, { + SENSOR_ATTR_2(temp3_max_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 2), + SENSOR_ATTR_2(temp3_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 6), +} }; + /* * Temp attr for the f8000 * Note on the f8000 temp_ovt (crit) is used as max, and temp_high (max) @@ -2287,6 +2304,7 @@ static int f71882fg_probe(struct platform_device *pdev) int nr_fans = f71882fg_nr_fans[sio_data->type]; int nr_temps = f71882fg_nr_temps[sio_data->type]; int err, i; + int size; u8 start_reg, reg; data = devm_kzalloc(&pdev->dev, sizeof(struct f71882fg_data), @@ -2297,7 +2315,8 @@ static int f71882fg_probe(struct platform_device *pdev) data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start; data->type = sio_data->type; data->temp_start - (data->type = f71858fg || data->type = f8000) ? 0 : 1; + (data->type = f71858fg || data->type = f8000 || + data->type = f81866a) ? 0 : 1; mutex_init(&data->update_lock); platform_set_drvdata(pdev, data); @@ -2339,6 +2358,11 @@ static int f71882fg_probe(struct platform_device *pdev) f8000_temp_attr, ARRAY_SIZE(f8000_temp_attr)); break; + case f81866a: + err = f71882fg_create_sysfs_files(pdev, + f71858fg_temp_attr, + ARRAY_SIZE(f71858fg_temp_attr)); + break; default: err = f71882fg_create_sysfs_files(pdev, &fxxxx_temp_attr[0][0], @@ -2348,10 +2372,18 @@ static int f71882fg_probe(struct platform_device *pdev) goto exit_unregister_sysfs; if (f71882fg_temp_has_beep[data->type]) { - err = f71882fg_create_sysfs_files(pdev, - &fxxxx_temp_beep_attr[0][0], - ARRAY_SIZE(fxxxx_temp_beep_attr[0]) - * nr_temps); + if (data->type = f81866a) { + size = ARRAY_SIZE(f81866_temp_beep_attr[0]); + err = f71882fg_create_sysfs_files(pdev, + &f81866_temp_beep_attr[0][0], + size * nr_temps); + + } else { + size = ARRAY_SIZE(fxxxx_temp_beep_attr[0]); + err = f71882fg_create_sysfs_files(pdev, + &fxxxx_temp_beep_attr[0][0], + size * nr_temps); + } if (err) goto exit_unregister_sysfs; } @@ -2468,15 +2500,27 @@ static int f71882fg_remove(struct platform_device *pdev) f8000_temp_attr, ARRAY_SIZE(f8000_temp_attr)); break; + case f81866a: + f71882fg_remove_sysfs_files(pdev, + f71858fg_temp_attr, + ARRAY_SIZE(f71858fg_temp_attr)); + break; default: f71882fg_remove_sysfs_files(pdev, &fxxxx_temp_attr[0][0], ARRAY_SIZE(fxxxx_temp_attr[0]) * nr_temps); } if (f71882fg_temp_has_beep[data->type]) { - f71882fg_remove_sysfs_files(pdev, - &fxxxx_temp_beep_attr[0][0], - ARRAY_SIZE(fxxxx_temp_beep_attr[0]) * nr_temps); + if (data->type = f81866a) + f71882fg_remove_sysfs_files(pdev, + &f81866_temp_beep_attr[0][0], + ARRAY_SIZE(f81866_temp_beep_attr[0]) + * nr_temps); + else + f71882fg_remove_sysfs_files(pdev, + &fxxxx_temp_beep_attr[0][0], + ARRAY_SIZE(fxxxx_temp_beep_attr[0]) + * nr_temps); } for (i = 0; i < F71882FG_MAX_INS; i++) { -- 1.9.1 _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH V3 2/3] hwmon:f71882fg fix f81866a temp/beep setting @ 2015-07-07 8:22 ` Peter Hung 0 siblings, 0 replies; 10+ messages in thread From: Peter Hung @ 2015-07-07 8:22 UTC (permalink / raw) To: jdelvare, linux Cc: lm-sensors, linux-kernel, tom_tsai, peter_hong, Peter Hung The temperature value of Fintek F81866 is the same with f71882fg. It located with 0x6c + 2*(nr), others located with 0x6c + 2*(nr+1). We change the rule in f71882fg_probe(), If type = f71858fg/f8000/f81866a. the temp_start will set to 0, others are 1. The F81866 over-temperature beep setting is not the same with f71882fg too. They are using the same address 63H, but F81866 is using bit 0/1/2 & 4/5/6, others are using bit 1/2/3 & 5/6/7, So we copy from fxxxx_temp_beep_attr[] to f81866_temp_beep_attr and change bit setting. Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> --- drivers/hwmon/f71882fg.c | 60 +++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 52 insertions(+), 8 deletions(-) diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index 3a7185a..79f1f50 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -506,6 +506,23 @@ static struct sensor_device_attribute_2 fxxxx_temp_beep_attr[3][2] = { { store_temp_beep, 0, 7), } }; +static struct sensor_device_attribute_2 f81866_temp_beep_attr[3][2] = { { + SENSOR_ATTR_2(temp1_max_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 0), + SENSOR_ATTR_2(temp1_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 4), +}, { + SENSOR_ATTR_2(temp2_max_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 1), + SENSOR_ATTR_2(temp2_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 5), +}, { + SENSOR_ATTR_2(temp3_max_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 2), + SENSOR_ATTR_2(temp3_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 6), +} }; + /* * Temp attr for the f8000 * Note on the f8000 temp_ovt (crit) is used as max, and temp_high (max) @@ -2287,6 +2304,7 @@ static int f71882fg_probe(struct platform_device *pdev) int nr_fans = f71882fg_nr_fans[sio_data->type]; int nr_temps = f71882fg_nr_temps[sio_data->type]; int err, i; + int size; u8 start_reg, reg; data = devm_kzalloc(&pdev->dev, sizeof(struct f71882fg_data), @@ -2297,7 +2315,8 @@ static int f71882fg_probe(struct platform_device *pdev) data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start; data->type = sio_data->type; data->temp_start = - (data->type == f71858fg || data->type == f8000) ? 0 : 1; + (data->type == f71858fg || data->type == f8000 || + data->type == f81866a) ? 0 : 1; mutex_init(&data->update_lock); platform_set_drvdata(pdev, data); @@ -2339,6 +2358,11 @@ static int f71882fg_probe(struct platform_device *pdev) f8000_temp_attr, ARRAY_SIZE(f8000_temp_attr)); break; + case f81866a: + err = f71882fg_create_sysfs_files(pdev, + f71858fg_temp_attr, + ARRAY_SIZE(f71858fg_temp_attr)); + break; default: err = f71882fg_create_sysfs_files(pdev, &fxxxx_temp_attr[0][0], @@ -2348,10 +2372,18 @@ static int f71882fg_probe(struct platform_device *pdev) goto exit_unregister_sysfs; if (f71882fg_temp_has_beep[data->type]) { - err = f71882fg_create_sysfs_files(pdev, - &fxxxx_temp_beep_attr[0][0], - ARRAY_SIZE(fxxxx_temp_beep_attr[0]) - * nr_temps); + if (data->type == f81866a) { + size = ARRAY_SIZE(f81866_temp_beep_attr[0]); + err = f71882fg_create_sysfs_files(pdev, + &f81866_temp_beep_attr[0][0], + size * nr_temps); + + } else { + size = ARRAY_SIZE(fxxxx_temp_beep_attr[0]); + err = f71882fg_create_sysfs_files(pdev, + &fxxxx_temp_beep_attr[0][0], + size * nr_temps); + } if (err) goto exit_unregister_sysfs; } @@ -2468,15 +2500,27 @@ static int f71882fg_remove(struct platform_device *pdev) f8000_temp_attr, ARRAY_SIZE(f8000_temp_attr)); break; + case f81866a: + f71882fg_remove_sysfs_files(pdev, + f71858fg_temp_attr, + ARRAY_SIZE(f71858fg_temp_attr)); + break; default: f71882fg_remove_sysfs_files(pdev, &fxxxx_temp_attr[0][0], ARRAY_SIZE(fxxxx_temp_attr[0]) * nr_temps); } if (f71882fg_temp_has_beep[data->type]) { - f71882fg_remove_sysfs_files(pdev, - &fxxxx_temp_beep_attr[0][0], - ARRAY_SIZE(fxxxx_temp_beep_attr[0]) * nr_temps); + if (data->type == f81866a) + f71882fg_remove_sysfs_files(pdev, + &f81866_temp_beep_attr[0][0], + ARRAY_SIZE(f81866_temp_beep_attr[0]) + * nr_temps); + else + f71882fg_remove_sysfs_files(pdev, + &fxxxx_temp_beep_attr[0][0], + ARRAY_SIZE(fxxxx_temp_beep_attr[0]) + * nr_temps); } for (i = 0; i < F71882FG_MAX_INS; i++) { -- 1.9.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [lm-sensors] [PATCH V3 3/3] hwmon:f71882fg fix f81866a voltage protection 2015-07-07 8:22 ` Peter Hung @ 2015-07-07 8:22 ` Peter Hung -1 siblings, 0 replies; 10+ messages in thread From: Peter Hung @ 2015-07-07 8:22 UTC (permalink / raw) To: jdelvare, linux Cc: lm-sensors, linux-kernel, tom_tsai, peter_hong, Peter Hung The f81866a voltage-1 protector(VIN1) address is differ from f71882. f71882 status:12H, beep:13H, v-high:32H f81866a status:16H, beep:17H, v-high:3aH Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> --- drivers/hwmon/f71882fg.c | 50 +++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 41 insertions(+), 9 deletions(-) diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index 79f1f50..7cecd83 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -71,6 +71,10 @@ #define F71882FG_REG_IN(nr) (0x20 + (nr)) #define F71882FG_REG_IN1_HIGH 0x32 /* f7188x only */ +#define F81866_REG_IN_STATUS 0x16 /* F81866 only */ +#define F81866_REG_IN_BEEP 0x17 /* F81866 only */ +#define F81866_REG_IN1_HIGH 0x3a /* F81866 only */ + #define F71882FG_REG_FAN(nr) (0xA0 + (16 * (nr))) #define F71882FG_REG_FAN_TARGET(nr) (0xA2 + (16 * (nr))) #define F71882FG_REG_FAN_FULL_SPEED(nr) (0xA4 + (16 * (nr))) @@ -1204,10 +1208,21 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev) if (time_after(jiffies, data->last_limits + 60 * HZ) || !data->valid) { if (f71882fg_has_in1_alarm[data->type]) { - data->in1_max - f71882fg_read8(data, F71882FG_REG_IN1_HIGH); - data->in_beep - f71882fg_read8(data, F71882FG_REG_IN_BEEP); + if (data->type = f81866a) { + data->in1_max + f71882fg_read8(data, + F81866_REG_IN1_HIGH); + data->in_beep + f71882fg_read8(data, + F81866_REG_IN_BEEP); + } else { + data->in1_max + f71882fg_read8(data, + F71882FG_REG_IN1_HIGH); + data->in_beep + f71882fg_read8(data, + F71882FG_REG_IN_BEEP); + } } /* Get High & boundary temps*/ @@ -1331,9 +1346,16 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev) data->fan[3] = f71882fg_read16(data, F71882FG_REG_FAN(3)); - if (f71882fg_has_in1_alarm[data->type]) - data->in_status = f71882fg_read8(data, + if (f71882fg_has_in1_alarm[data->type]) { + if (data->type = f81866a) + data->in_status = f71882fg_read8(data, + F81866_REG_IN_STATUS); + + else + data->in_status = f71882fg_read8(data, F71882FG_REG_IN_STATUS); + } + for (nr = 0; nr < F71882FG_MAX_INS; nr++) if (f71882fg_has_in[data->type][nr]) data->in[nr] = f71882fg_read8(data, @@ -1474,7 +1496,10 @@ static ssize_t store_in_max(struct device *dev, struct device_attribute val = clamp_val(val, 0, 255); mutex_lock(&data->update_lock); - f71882fg_write8(data, F71882FG_REG_IN1_HIGH, val); + if (data->type = f81866a) + f71882fg_write8(data, F81866_REG_IN1_HIGH, val); + else + f71882fg_write8(data, F71882FG_REG_IN1_HIGH, val); data->in1_max = val; mutex_unlock(&data->update_lock); @@ -1505,13 +1530,20 @@ static ssize_t store_in_beep(struct device *dev, struct device_attribute return err; mutex_lock(&data->update_lock); - data->in_beep = f71882fg_read8(data, F71882FG_REG_IN_BEEP); + if (data->type = f81866a) + data->in_beep = f71882fg_read8(data, F81866_REG_IN_BEEP); + else + data->in_beep = f71882fg_read8(data, F71882FG_REG_IN_BEEP); + if (val) data->in_beep |= 1 << nr; else data->in_beep &= ~(1 << nr); - f71882fg_write8(data, F71882FG_REG_IN_BEEP, data->in_beep); + if (data->type = f81866a) + f71882fg_write8(data, F81866_REG_IN_BEEP, data->in_beep); + else + f71882fg_write8(data, F71882FG_REG_IN_BEEP, data->in_beep); mutex_unlock(&data->update_lock); return count; -- 1.9.1 _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH V3 3/3] hwmon:f71882fg fix f81866a voltage protection @ 2015-07-07 8:22 ` Peter Hung 0 siblings, 0 replies; 10+ messages in thread From: Peter Hung @ 2015-07-07 8:22 UTC (permalink / raw) To: jdelvare, linux Cc: lm-sensors, linux-kernel, tom_tsai, peter_hong, Peter Hung The f81866a voltage-1 protector(VIN1) address is differ from f71882. f71882 status:12H, beep:13H, v-high:32H f81866a status:16H, beep:17H, v-high:3aH Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> --- drivers/hwmon/f71882fg.c | 50 +++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 41 insertions(+), 9 deletions(-) diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index 79f1f50..7cecd83 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -71,6 +71,10 @@ #define F71882FG_REG_IN(nr) (0x20 + (nr)) #define F71882FG_REG_IN1_HIGH 0x32 /* f7188x only */ +#define F81866_REG_IN_STATUS 0x16 /* F81866 only */ +#define F81866_REG_IN_BEEP 0x17 /* F81866 only */ +#define F81866_REG_IN1_HIGH 0x3a /* F81866 only */ + #define F71882FG_REG_FAN(nr) (0xA0 + (16 * (nr))) #define F71882FG_REG_FAN_TARGET(nr) (0xA2 + (16 * (nr))) #define F71882FG_REG_FAN_FULL_SPEED(nr) (0xA4 + (16 * (nr))) @@ -1204,10 +1208,21 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev) if (time_after(jiffies, data->last_limits + 60 * HZ) || !data->valid) { if (f71882fg_has_in1_alarm[data->type]) { - data->in1_max = - f71882fg_read8(data, F71882FG_REG_IN1_HIGH); - data->in_beep = - f71882fg_read8(data, F71882FG_REG_IN_BEEP); + if (data->type == f81866a) { + data->in1_max = + f71882fg_read8(data, + F81866_REG_IN1_HIGH); + data->in_beep = + f71882fg_read8(data, + F81866_REG_IN_BEEP); + } else { + data->in1_max = + f71882fg_read8(data, + F71882FG_REG_IN1_HIGH); + data->in_beep = + f71882fg_read8(data, + F71882FG_REG_IN_BEEP); + } } /* Get High & boundary temps*/ @@ -1331,9 +1346,16 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev) data->fan[3] = f71882fg_read16(data, F71882FG_REG_FAN(3)); - if (f71882fg_has_in1_alarm[data->type]) - data->in_status = f71882fg_read8(data, + if (f71882fg_has_in1_alarm[data->type]) { + if (data->type == f81866a) + data->in_status = f71882fg_read8(data, + F81866_REG_IN_STATUS); + + else + data->in_status = f71882fg_read8(data, F71882FG_REG_IN_STATUS); + } + for (nr = 0; nr < F71882FG_MAX_INS; nr++) if (f71882fg_has_in[data->type][nr]) data->in[nr] = f71882fg_read8(data, @@ -1474,7 +1496,10 @@ static ssize_t store_in_max(struct device *dev, struct device_attribute val = clamp_val(val, 0, 255); mutex_lock(&data->update_lock); - f71882fg_write8(data, F71882FG_REG_IN1_HIGH, val); + if (data->type == f81866a) + f71882fg_write8(data, F81866_REG_IN1_HIGH, val); + else + f71882fg_write8(data, F71882FG_REG_IN1_HIGH, val); data->in1_max = val; mutex_unlock(&data->update_lock); @@ -1505,13 +1530,20 @@ static ssize_t store_in_beep(struct device *dev, struct device_attribute return err; mutex_lock(&data->update_lock); - data->in_beep = f71882fg_read8(data, F71882FG_REG_IN_BEEP); + if (data->type == f81866a) + data->in_beep = f71882fg_read8(data, F81866_REG_IN_BEEP); + else + data->in_beep = f71882fg_read8(data, F71882FG_REG_IN_BEEP); + if (val) data->in_beep |= 1 << nr; else data->in_beep &= ~(1 << nr); - f71882fg_write8(data, F71882FG_REG_IN_BEEP, data->in_beep); + if (data->type == f81866a) + f71882fg_write8(data, F81866_REG_IN_BEEP, data->in_beep); + else + f71882fg_write8(data, F71882FG_REG_IN_BEEP, data->in_beep); mutex_unlock(&data->update_lock); return count; -- 1.9.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [lm-sensors] [PATCH V3 0/3] hwmon:f71882fg add new Fintek SuperIO support 2015-07-07 8:22 ` Peter Hung @ 2015-07-07 19:32 ` Guenter Roeck -1 siblings, 0 replies; 10+ messages in thread From: Guenter Roeck @ 2015-07-07 19:32 UTC (permalink / raw) To: Peter Hung, jdelvare Cc: lm-sensors, linux-kernel, tom_tsai, peter_hong, Peter Hung On 07/07/2015 01:22 AM, Peter Hung wrote: > The first patch will add Fintek F81866/F71868 SuperIO > with H/W monitor function to f71882fg.c. > > But some F81866 functional address is differ from F71882fg. > The following 2 patches will fix this problem. > > The test report is upload to following link. If I lost something, > with test, please let me know. I'll append it to the report. > > Here is F81866 on customer MB report: > https://drive.google.com/file/d/0B8vRwwYO7aMFUmliSFVWVVRUaTA/view?pli=1 > > Cause we had no F71868 MB currently, we just check and mapping > register to driver. > > Changelog: > V3 > 1. Fix fatal compile error. (Thanks to Guenter Roeck) > 2. Fix array size and content not match error. > (Thanks to Dan Carpenter) > > V2 > 1. Fix comments by Guenter Roeck <linux@roeck-us.net> > all newer add IC should keep chip IDs in numeric order. > > Peter Hung (3): > hwmon:f71882fg add f81866/f71868 SuperIO support > hwmon:f71882fg fix f81866a temp/beep setting > hwmon:f71882fg fix f81866a voltage protection > > drivers/hwmon/f71882fg.c | 163 +++++++++++++++++++++++++++++++++++++---------- > 1 file changed, 131 insertions(+), 32 deletions(-) > Series applied to -next. Thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH V3 0/3] hwmon:f71882fg add new Fintek SuperIO support @ 2015-07-07 19:32 ` Guenter Roeck 0 siblings, 0 replies; 10+ messages in thread From: Guenter Roeck @ 2015-07-07 19:32 UTC (permalink / raw) To: Peter Hung, jdelvare Cc: lm-sensors, linux-kernel, tom_tsai, peter_hong, Peter Hung On 07/07/2015 01:22 AM, Peter Hung wrote: > The first patch will add Fintek F81866/F71868 SuperIO > with H/W monitor function to f71882fg.c. > > But some F81866 functional address is differ from F71882fg. > The following 2 patches will fix this problem. > > The test report is upload to following link. If I lost something, > with test, please let me know. I'll append it to the report. > > Here is F81866 on customer MB report: > https://drive.google.com/file/d/0B8vRwwYO7aMFUmliSFVWVVRUaTA/view?pli=1 > > Cause we had no F71868 MB currently, we just check and mapping > register to driver. > > Changelog: > V3 > 1. Fix fatal compile error. (Thanks to Guenter Roeck) > 2. Fix array size and content not match error. > (Thanks to Dan Carpenter) > > V2 > 1. Fix comments by Guenter Roeck <linux@roeck-us.net> > all newer add IC should keep chip IDs in numeric order. > > Peter Hung (3): > hwmon:f71882fg add f81866/f71868 SuperIO support > hwmon:f71882fg fix f81866a temp/beep setting > hwmon:f71882fg fix f81866a voltage protection > > drivers/hwmon/f71882fg.c | 163 +++++++++++++++++++++++++++++++++++++---------- > 1 file changed, 131 insertions(+), 32 deletions(-) > Series applied to -next. Thanks, Guenter ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2015-07-07 19:33 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-07-07 8:22 [lm-sensors] [PATCH V3 0/3] hwmon:f71882fg add new Fintek SuperIO support Peter Hung 2015-07-07 8:22 ` Peter Hung 2015-07-07 8:22 ` [lm-sensors] [PATCH V3 1/3] hwmon:f71882fg add f81866/f71868 " Peter Hung 2015-07-07 8:22 ` Peter Hung 2015-07-07 8:22 ` [lm-sensors] [PATCH V3 2/3] hwmon:f71882fg fix f81866a temp/beep setting Peter Hung 2015-07-07 8:22 ` Peter Hung 2015-07-07 8:22 ` [lm-sensors] [PATCH V3 3/3] hwmon:f71882fg fix f81866a voltage protection Peter Hung 2015-07-07 8:22 ` Peter Hung 2015-07-07 19:32 ` [lm-sensors] [PATCH V3 0/3] hwmon:f71882fg add new Fintek SuperIO support Guenter Roeck 2015-07-07 19:32 ` Guenter Roeck
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.