From: Joshua Clayton <stillcompiling@gmail.com>
To: Larry Finger <Larry.Finger@lwfinger.net>,
Florian Schilhabel <florian.c.schilhabel@googlemail.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nitin Kuppelur <nitinkuppelur@gmail.com>,
Sudip Mukherjee <sudipm.mukherjee@gmail.com>,
Joshua Clayton <stillcompiling@gmail.com>,
Tapasweni Pathak <tapaswenipathak@gmail.com>,
Vaishali Thakkar <vthakkar1994@gmail.com>,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org
Subject: [PATCH 5/5] staging: rtl8712: style fix:
Date: Thu, 23 Jul 2015 21:53:18 -0700 [thread overview]
Message-ID: <1437713598-7657-1-git-send-email-stillcompiling@gmail.com> (raw)
In-Reply-To: <1437712717-7287-1-git-send-email-stillcompiling@gmail.com>
change instances SupportedRates to compliant and sane "rates"
This change in no way harms readability, and brings several lines
under the 80 character limit.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
---
drivers/staging/rtl8712/ieee80211.c | 22 +++++++++++-----------
drivers/staging/rtl8712/rtl871x_ioctl_linux.c | 21 +++++++++------------
drivers/staging/rtl8712/wlan_bssdef.h | 4 ++--
3 files changed, 22 insertions(+), 25 deletions(-)
diff --git a/drivers/staging/rtl8712/ieee80211.c b/drivers/staging/rtl8712/ieee80211.c
index 5786808..ca9dcaf 100644
--- a/drivers/staging/rtl8712/ieee80211.c
+++ b/drivers/staging/rtl8712/ieee80211.c
@@ -134,22 +134,22 @@ u8 *r8712_get_ie(u8 *pbuf, sint index, sint *len, sint limit)
return NULL;
}
-static void set_supported_rate(u8 *SupportedRates, uint mode)
+static void set_supported_rate(u8 *rates, uint mode)
{
- memset(SupportedRates, 0, NDIS_802_11_LENGTH_RATES_EX);
+ memset(rates, 0, NDIS_802_11_LENGTH_RATES_EX);
switch (mode) {
case WIRELESS_11B:
- memcpy(SupportedRates, WIFI_CCKRATES,
+ memcpy(rates, WIFI_CCKRATES,
IEEE80211_CCK_RATE_LEN);
break;
case WIRELESS_11G:
case WIRELESS_11A:
- memcpy(SupportedRates, WIFI_OFDMRATES,
+ memcpy(rates, WIFI_OFDMRATES,
IEEE80211_NUM_OFDM_RATESLEN);
break;
case WIRELESS_11BG:
- memcpy(SupportedRates, WIFI_CCKRATES, IEEE80211_CCK_RATE_LEN);
- memcpy(SupportedRates + IEEE80211_CCK_RATE_LEN, WIFI_OFDMRATES,
+ memcpy(rates, WIFI_CCKRATES, IEEE80211_CCK_RATE_LEN);
+ memcpy(rates + IEEE80211_CCK_RATE_LEN, WIFI_OFDMRATES,
IEEE80211_NUM_OFDM_RATESLEN);
break;
}
@@ -195,17 +195,17 @@ int r8712_generate_ie(struct registry_priv *pregistrypriv)
ie = r8712_set_ie(ie, _SSID_IE_, pdev_network->Ssid.SsidLength,
pdev_network->Ssid.Ssid, &sz);
/*supported rates*/
- set_supported_rate(pdev_network->SupportedRates,
+ set_supported_rate(pdev_network->rates,
pregistrypriv->wireless_mode);
- rateLen = r8712_get_rateset_len(pdev_network->SupportedRates);
+ rateLen = r8712_get_rateset_len(pdev_network->rates);
if (rateLen > 8) {
ie = r8712_set_ie(ie, _SUPPORTEDRATES_IE_, 8,
- pdev_network->SupportedRates, &sz);
+ pdev_network->rates, &sz);
ie = r8712_set_ie(ie, _EXT_SUPPORTEDRATES_IE_, (rateLen - 8),
- (pdev_network->SupportedRates + 8), &sz);
+ (pdev_network->rates + 8), &sz);
} else
ie = r8712_set_ie(ie, _SUPPORTEDRATES_IE_,
- rateLen, pdev_network->SupportedRates, &sz);
+ rateLen, pdev_network->rates, &sz);
/*DS parameter set*/
ie = r8712_set_ie(ie, _DSSET_IE_, 1,
(u8 *)&(pdev_network->Configuration.DSConfig), &sz);
diff --git a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
index 087fbf1..219239c 100644
--- a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
+++ b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
@@ -203,14 +203,12 @@ static inline char *translate_scan(struct _adapter *padapter,
}
/* Add the protocol name */
iwe.cmd = SIOCGIWNAME;
- if ((r8712_is_cckratesonly_included((u8 *)&pnetwork->network.
- SupportedRates)) == true) {
+ if (r8712_is_cckratesonly_included(pnetwork->network.rates)) {
if (ht_cap == true)
snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11bn");
else
snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11b");
- } else if ((r8712_is_cckrates_included((u8 *)&pnetwork->network.
- SupportedRates)) == true) {
+ } else if (r8712_is_cckrates_included(pnetwork->network.rates)) {
if (ht_cap == true)
snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11bgn");
else
@@ -270,9 +268,9 @@ static inline char *translate_scan(struct _adapter *padapter,
iwe.u.bitrate.disabled = 0;
iwe.u.bitrate.value = 0;
i = 0;
- while (pnetwork->network.SupportedRates[i] != 0) {
+ while (pnetwork->network.rates[i] != 0) {
/* Bit rate given in 500 kb/s units */
- iwe.u.bitrate.value = (pnetwork->network.SupportedRates[i++] &
+ iwe.u.bitrate.value = (pnetwork->network.rates[i++] &
0x7F) * 500000;
current_val = iwe_stream_add_value(info, start, current_val,
stop, &iwe, IW_EV_PARAM_LEN);
@@ -644,15 +642,15 @@ static int r8711_wx_get_name(struct net_device *dev,
&ht_ielen, pcur_bss->IELength - 12);
if (p && ht_ielen > 0)
ht_cap = true;
- prates = pcur_bss->SupportedRates;
- if (r8712_is_cckratesonly_included((u8 *)prates) == true) {
+ prates = pcur_bss->rates;
+ if (r8712_is_cckratesonly_included(prates) == true) {
if (ht_cap == true)
snprintf(wrqu->name, IFNAMSIZ,
"IEEE 802.11bn");
else
snprintf(wrqu->name, IFNAMSIZ,
"IEEE 802.11b");
- } else if ((r8712_is_cckrates_included((u8 *)prates)) == true) {
+ } else if ((r8712_is_cckrates_included(prates)) == true) {
if (ht_cap == true)
snprintf(wrqu->name, IFNAMSIZ,
"IEEE 802.11bgn");
@@ -1444,9 +1442,8 @@ static int r8711_wx_get_rate(struct net_device *dev,
(IEEE80211_HT_CAP_SGI_20 |
IEEE80211_HT_CAP_SGI_40)) ? 1 : 0;
}
- while ((pcur_bss->SupportedRates[i] != 0) &&
- (pcur_bss->SupportedRates[i] != 0xFF)) {
- rate = pcur_bss->SupportedRates[i] & 0x7F;
+ while (pcur_bss->rates[i] && (pcur_bss->rates[i] != 0xFF)) {
+ rate = pcur_bss->rates[i] & 0x7F;
if (rate > max_rate)
max_rate = rate;
wrqu->bitrate.fixed = 0; /* no auto select */
diff --git a/drivers/staging/rtl8712/wlan_bssdef.h b/drivers/staging/rtl8712/wlan_bssdef.h
index 7a410b5..8e2d798 100644
--- a/drivers/staging/rtl8712/wlan_bssdef.h
+++ b/drivers/staging/rtl8712/wlan_bssdef.h
@@ -83,7 +83,7 @@ struct NDIS_802_11_FIXED_IEs {
* 6 * sizeof (unsigned char) + 2 + sizeof (ndis_802_11_ssid) + sizeof (u32)
* + sizeof (s32) + sizeof (NDIS_802_11_NETWORK_TYPE)
* + sizeof (struct NDIS_802_11_CONFIGURATION)
- * + sizeof (NDIS_802_11_RATES_EX) + IELength
+ * + sizeof (rates) + IELength
* Except the IELength, all other fields are fixed length. Therefore, we can
* define a macro to present the partial sum.
@@ -99,7 +99,7 @@ struct wlan_bssid_ex {
enum NDIS_802_11_NETWORK_TYPE NetworkTypeInUse;
struct NDIS_802_11_CONFIGURATION Configuration;
enum NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode;
- u8 SupportedRates[NDIS_802_11_LENGTH_RATES_EX];
+ u8 rates[NDIS_802_11_LENGTH_RATES_EX];
u32 IELength;
/*(timestamp, beacon interval, and capability information) */
u8 IEs[MAX_IE_SZ];
--
2.4.6
next prev parent reply other threads:[~2015-07-24 4:53 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-24 4:38 [PATCH 0/5] Joshua Clayton
2015-07-24 4:38 ` [PATCH 1/5] staging: rtl8712: fix buggy size calculation Joshua Clayton
2015-07-24 10:52 ` Dan Carpenter
2015-07-24 4:38 ` [PATCH 2/5] staging: rtl8712: simplify " Joshua Clayton
2015-07-24 4:52 ` [PATCH 4/5] staging: rtl8712: remove typedefs Joshua Clayton
2015-07-24 4:53 ` Joshua Clayton [this message]
2015-07-24 10:52 ` [PATCH 5/5] staging: rtl8712: style fix: Dan Carpenter
2015-07-24 13:06 ` Joshua Clayton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437713598-7657-1-git-send-email-stillcompiling@gmail.com \
--to=stillcompiling@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=devel@driverdev.osuosl.org \
--cc=florian.c.schilhabel@googlemail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nitinkuppelur@gmail.com \
--cc=sudipm.mukherjee@gmail.com \
--cc=tapaswenipathak@gmail.com \
--cc=vthakkar1994@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.