* [U-Boot] [PATCH 1/2] sunxi: display: Enable composite video support on more boards
@ 2015-08-06 11:26 Hans de Goede
2015-08-06 11:26 ` [U-Boot] [PATCH 2/2] sunxi: display: Disable HDMI support on A13 based tablets Hans de Goede
2015-08-11 7:46 ` [U-Boot] [PATCH 1/2] sunxi: display: Enable composite video support on more boards Ian Campbell
0 siblings, 2 replies; 4+ messages in thread
From: Hans de Goede @ 2015-08-06 11:26 UTC (permalink / raw)
To: u-boot
Enable composite video support on all boards which have a composite video
out connector (either cinch or jack).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
configs/Bananapi_defconfig | 1 +
configs/Bananapro_defconfig | 1 +
configs/Mele_A1000_defconfig | 1 +
configs/Mele_M5_defconfig | 1 +
configs/Mini-X_defconfig | 1 +
configs/Orangepi_defconfig | 1 +
configs/Orangepi_mini_defconfig | 1 +
configs/ba10_tv_box_defconfig | 1 +
configs/i12-tvbox_defconfig | 1 +
configs/jesurun_q5_defconfig | 1 +
10 files changed, 10 insertions(+)
diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig
index 4b9ef35..560295f 100644
--- a/configs/Bananapi_defconfig
+++ b/configs/Bananapi_defconfig
@@ -3,6 +3,7 @@ CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=432
CONFIG_GMAC_TX_DELAY=3
+CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig
index 5506ab3..346db34 100644
--- a/configs/Bananapro_defconfig
+++ b/configs/Bananapro_defconfig
@@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=432
CONFIG_USB1_VBUS_PIN="PH0"
CONFIG_USB2_VBUS_PIN="PH1"
CONFIG_GMAC_TX_DELAY=3
+CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig
index 5e66d43..b983c8c 100644
--- a/configs/Mele_A1000_defconfig
+++ b/configs/Mele_A1000_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN4I=y
CONFIG_VIDEO_VGA=y
+CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/Mele_M5_defconfig b/configs/Mele_M5_defconfig
index 40f5daa..0d1ba15 100644
--- a/configs/Mele_M5_defconfig
+++ b/configs/Mele_M5_defconfig
@@ -4,6 +4,7 @@ CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=432
CONFIG_DRAM_ZQ=122
CONFIG_MMC0_CD_PIN="PH1"
+CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m5"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig
index 00b6c63..c88eb9b 100644
--- a/configs/Mini-X_defconfig
+++ b/configs/Mini-X_defconfig
@@ -1,6 +1,7 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN4I=y
+CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mini-xplus"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/Orangepi_defconfig b/configs/Orangepi_defconfig
index f9408b1..d67bb90 100644
--- a/configs/Orangepi_defconfig
+++ b/configs/Orangepi_defconfig
@@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=432
CONFIG_USB1_VBUS_PIN="PH26"
CONFIG_USB2_VBUS_PIN="PH22"
CONFIG_VIDEO_VGA=y
+CONFIG_VIDEO_COMPOSITE=y
CONFIG_GMAC_TX_DELAY=3
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
diff --git a/configs/Orangepi_mini_defconfig b/configs/Orangepi_mini_defconfig
index 1dc0e76..71d236b 100644
--- a/configs/Orangepi_mini_defconfig
+++ b/configs/Orangepi_mini_defconfig
@@ -7,6 +7,7 @@ CONFIG_MMC3_CD_PIN="PH11"
CONFIG_MMC_SUNXI_SLOT_EXTRA=3
CONFIG_USB1_VBUS_PIN="PH26"
CONFIG_USB2_VBUS_PIN="PH22"
+CONFIG_VIDEO_COMPOSITE=y
CONFIG_GMAC_TX_DELAY=3
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi-mini"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig
index 5b5fc12..cdcd9de 100644
--- a/configs/ba10_tv_box_defconfig
+++ b/configs/ba10_tv_box_defconfig
@@ -4,6 +4,7 @@ CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=384
CONFIG_DRAM_EMR1=4
CONFIG_USB2_VBUS_PIN="PH12"
+CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-ba10-tvbox"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/i12-tvbox_defconfig b/configs/i12-tvbox_defconfig
index 99e78ba..d4d9524 100644
--- a/configs/i12-tvbox_defconfig
+++ b/configs/i12-tvbox_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
+CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-i12-tvbox"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig
index b0d8621..46c38e5 100644
--- a/configs/jesurun_q5_defconfig
+++ b/configs/jesurun_q5_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=312
+CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
--
2.4.3
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH 2/2] sunxi: display: Disable HDMI support on A13 based tablets
2015-08-06 11:26 [U-Boot] [PATCH 1/2] sunxi: display: Enable composite video support on more boards Hans de Goede
@ 2015-08-06 11:26 ` Hans de Goede
2015-08-11 7:46 ` Ian Campbell
2015-08-11 7:46 ` [U-Boot] [PATCH 1/2] sunxi: display: Enable composite video support on more boards Ian Campbell
1 sibling, 1 reply; 4+ messages in thread
From: Hans de Goede @ 2015-08-06 11:26 UTC (permalink / raw)
To: u-boot
The sun5i die has a hdmi encoder onboard, but the A13 package does not
route this to the outside, disable hdmi support on A13 based boards.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
configs/Ampe_A76_defconfig | 1 +
configs/TZX-Q8-713B7_defconfig | 1 +
configs/UTOO_P66_defconfig | 1 +
configs/forfun_q88db_defconfig | 1 +
configs/iNet_86VS_defconfig | 1 +
5 files changed, 5 insertions(+)
diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig
index 1d36919..3aaf029 100644
--- a/configs/Ampe_A76_defconfig
+++ b/configs/Ampe_A76_defconfig
@@ -6,6 +6,7 @@ CONFIG_MMC0_CD_PIN="PG0"
CONFIG_USB0_VBUS_PIN="PG12"
CONFIG_USB0_VBUS_DET="PG1"
CONFIG_AXP_GPIO=y
+# CONFIG_VIDEO_HDMI is not set
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:82,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
diff --git a/configs/TZX-Q8-713B7_defconfig b/configs/TZX-Q8-713B7_defconfig
index 3508834..4ef80db 100644
--- a/configs/TZX-Q8-713B7_defconfig
+++ b/configs/TZX-Q8-713B7_defconfig
@@ -6,6 +6,7 @@ CONFIG_MMC0_CD_PIN="PG0"
CONFIG_USB0_VBUS_PIN="PG12"
CONFIG_USB0_VBUS_DET="PG1"
CONFIG_AXP_GPIO=y
+# CONFIG_VIDEO_HDMI is not set
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig
index 169c2e8..99a8c31 100644
--- a/configs/UTOO_P66_defconfig
+++ b/configs/UTOO_P66_defconfig
@@ -9,6 +9,7 @@ CONFIG_USB0_VBUS_PIN="PB04"
CONFIG_USB0_VBUS_DET="PG01"
CONFIG_USB0_ID_DET="PG2"
CONFIG_AXP_GPIO=y
+# CONFIG_VIDEO_HDMI is not set
CONFIG_VIDEO_LCD_MODE="x:480,y:800,depth:18,pclk_khz:25000,le:2,ri:93,up:2,lo:93,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_POWER="PG4"
diff --git a/configs/forfun_q88db_defconfig b/configs/forfun_q88db_defconfig
index 6fff725..610a062 100644
--- a/configs/forfun_q88db_defconfig
+++ b/configs/forfun_q88db_defconfig
@@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=384
CONFIG_USB0_VBUS_PIN="PG12"
CONFIG_USB0_VBUS_DET="PG1"
CONFIG_AXP_GPIO=y
+# CONFIG_VIDEO_HDMI is not set
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
diff --git a/configs/iNet_86VS_defconfig b/configs/iNet_86VS_defconfig
index 33162d1..f958c31 100644
--- a/configs/iNet_86VS_defconfig
+++ b/configs/iNet_86VS_defconfig
@@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=408
CONFIG_USB0_VBUS_PIN="PG12"
CONFIG_USB0_VBUS_DET="PG1"
CONFIG_AXP_GPIO=y
+# CONFIG_VIDEO_HDMI is not set
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:209,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
--
2.4.3
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH 1/2] sunxi: display: Enable composite video support on more boards
2015-08-06 11:26 [U-Boot] [PATCH 1/2] sunxi: display: Enable composite video support on more boards Hans de Goede
2015-08-06 11:26 ` [U-Boot] [PATCH 2/2] sunxi: display: Disable HDMI support on A13 based tablets Hans de Goede
@ 2015-08-11 7:46 ` Ian Campbell
1 sibling, 0 replies; 4+ messages in thread
From: Ian Campbell @ 2015-08-11 7:46 UTC (permalink / raw)
To: u-boot
On Thu, 2015-08-06 at 13:26 +0200, Hans de Goede wrote:
> Enable composite video support on all boards which have a composite
> video
> out connector (either cinch or jack).
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH 2/2] sunxi: display: Disable HDMI support on A13 based tablets
2015-08-06 11:26 ` [U-Boot] [PATCH 2/2] sunxi: display: Disable HDMI support on A13 based tablets Hans de Goede
@ 2015-08-11 7:46 ` Ian Campbell
0 siblings, 0 replies; 4+ messages in thread
From: Ian Campbell @ 2015-08-11 7:46 UTC (permalink / raw)
To: u-boot
On Thu, 2015-08-06 at 13:26 +0200, Hans de Goede wrote:
> The sun5i die has a hdmi encoder onboard, but the A13 package does
> not
> route this to the outside, disable hdmi support on A13 based boards.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-08-11 7:46 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-08-06 11:26 [U-Boot] [PATCH 1/2] sunxi: display: Enable composite video support on more boards Hans de Goede
2015-08-06 11:26 ` [U-Boot] [PATCH 2/2] sunxi: display: Disable HDMI support on A13 based tablets Hans de Goede
2015-08-11 7:46 ` Ian Campbell
2015-08-11 7:46 ` [U-Boot] [PATCH 1/2] sunxi: display: Enable composite video support on more boards Ian Campbell
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.