All of lore.kernel.org
 help / color / mirror / Atom feed
From: Graham Whaley <graham.whaley@linux.intel.com>
To: Danilo Cesar Lemes de Paula <danilo.cesar@collabora.co.uk>,
	Daniel Vetter <daniel.vetter@ffwll.ch>,
	dri-devel <dri-devel@lists.freedesktop.org>
Cc: Michal Marek <mmarek@suse.cz>,
	Herbert Xu <herbert@gondor.apana.org.au>,
	Jonathan Corbet <corbet@lwn.net>,
	Stephan Mueller <smueller@chronox.de>,
	intel-gfx <intel-gfx@lists.freedesktop.org>,
	Randy Dunlap <rdunlap@infradead.org>,
	linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Subject: Re: [PATCH] scripts/kernel-doc: Improve Markdown results
Date: Mon, 24 Aug 2015 15:34:40 +0100	[thread overview]
Message-ID: <1440426880.11872.2.camel@linux.intel.com> (raw)
In-Reply-To: <1440185942-31030-1-git-send-email-danilo.cesar@collabora.co.uk>

On Fri, 2015-08-21 at 16:39 -0300, Danilo Cesar Lemes de Paula wrote:
> Using pandoc as the Markdown engine cause some minor side effects as
> pandoc includes  main <para> tags for almost everything.
> Original Markdown support approach removes those main tags, but it
> caused
> some inconsistencies when that tag is not the main one, like:
> <something>..</something>
> <para>...</para>
> 
> As kernel-doc was already including a <para> tag, it causes the
> presence
> of double <para> tags (<para><para>), which is not supported by
> DocBook
> spec.
> 
> Html target gets away with it, so it causes no harm, although other
> targets might not be so lucky (pdf as example).
> 
> We're now delegating the inclusion of the main <para> tag to pandoc
> only, as it knows when it's necessary or not.
> 
> That behavior causes a corner case, the only situation where we're
> certainly that <para> is not needed, which is the <refpurpose>
> content.
> For those cases, we're using a $output_markdown_nopara = 1 control
> var.
> 
> Signed-off-by: Danilo Cesar Lemes de Paula <


Feel free to add my:
Tested-by: Graham Whaley <graham.whaley@linux.intel.com>

 Graham
> danilo.cesar@collabora.co.uk>
> Cc: Randy Dunlap <rdunlap@infradead.org>
> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: Herbert Xu <herbert@gondor.apana.org.au>
> Cc: Stephan Mueller <smueller@chronox.de>
> Cc: Michal Marek <mmarek@suse.cz>
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-doc@vger.kernel.org
> Cc: intel-gfx <intel-gfx@lists.freedesktop.org>
> Cc: dri-devel <dri-devel@lists.freedesktop.org>
> Cc: Graham Whaley <graham.whaley@linux.intel.com>
> ---
>  Thanks to Graham Whaley who helped me to debug this.
> 
>  scripts/kernel-doc | 48 ++++++++++++++++++++++++++++++++++----------
> ----
>  1 file changed, 34 insertions(+), 14 deletions(-)
> 
> diff --git a/scripts/kernel-doc b/scripts/kernel-doc
> index 3850c1e..12a106c 100755
> --- a/scripts/kernel-doc
> +++ b/scripts/kernel-doc
> @@ -288,6 +288,7 @@ my $use_markdown = 0;
>  my $verbose = 0;
>  my $output_mode = "man";
>  my $output_preformatted = 0;
> +my $output_markdown_nopara = 0;
>  my $no_doc_sections = 0;
>  my @highlights = @highlights_man;
>  my $blankline = $blankline_man;
> @@ -529,8 +530,11 @@ sub markdown_to_docbook {
>  	close(CHLD_OUT);
>  	close(CHLD_ERR);
>  
> -	# pandoc insists in adding Main <para></para>, we should
> remove them.
> -	$content =~ s:\A\s*<para>\s*\n(.*)\n</para>\Z$:$1:egsm;
> +	if ($output_markdown_nopara) {
> +		# pandoc insists in adding Main <para></para>,
> sometimes we
> +		# want to remove them.
> +		$content =~
> s:\A\s*<para>\s*\n(.*)\n</para>\Z$:$1:egsm;
> +	}
>  
>  	return $content;
>  }
> @@ -605,7 +609,7 @@ sub output_highlight {
>  	    $line =~ s/^\s*//;
>  	}
>  	if ($line eq ""){
> -	    if (! $output_preformatted) {
> +	    if (! $output_preformatted && ! $use_markdown) {
>  		print $lineprefix, local_unescape($blankline);
>  	    }
>  	} else {
> @@ -1026,7 +1030,7 @@ sub output_section_xml(%) {
>  	    # programlisting is already included by pandoc
>  	    print "<programlisting>\n" unless $use_markdown;
>  	    $output_preformatted = 1;
> -	} else {
> +	} elsif (! $use_markdown) {
>  	    print "<para>\n";
>  	}
>  	output_highlight($args{'sections'}{$section});
> @@ -1034,7 +1038,7 @@ sub output_section_xml(%) {
>  	if ($section =~ m/EXAMPLE/i) {
>  	    print "</programlisting>\n" unless $use_markdown;
>  	    print "</informalexample>\n";
> -	} else {
> +	} elsif (! $use_markdown) {
>  	    print "</para>\n";
>  	}
>  	print "</refsect1>\n";
> @@ -1066,7 +1070,9 @@ sub output_function_xml(%) {
>      print " <refname>" . $args{'function'} . "</refname>\n";
>      print " <refpurpose>\n";
>      print "  ";
> +    $output_markdown_nopara = 1;
>      output_highlight ($args{'purpose'});
> +    $output_markdown_nopara = 0;
>      print " </refpurpose>\n";
>      print "</refnamediv>\n";
>  
> @@ -1104,10 +1110,12 @@ sub output_function_xml(%) {
>  	    $parameter_name =~ s/\[.*//;
>  
>  	    print "  <varlistentry>\n  
>  <term><parameter>$parameter</parameter></term>\n";
> -	    print "   <listitem>\n    <para>\n";
> +	    print "   <listitem>\n";
> +	    print "    <para>\n" unless $use_markdown;
>  	    $lineprefix="     ";
>  	   
>  output_highlight($args{'parameterdescs'}{$parameter_name});
> -	    print "    </para>\n   </listitem>\n 
>  </varlistentry>\n";
> +	    print "    </para>\n" unless $use_markdown;
> +	    print "   </listitem>\n  </varlistentry>\n";
>  	}
>  	print " </variablelist>\n";
>      } else {
> @@ -1143,7 +1151,9 @@ sub output_struct_xml(%) {
>      print " <refname>" . $args{'type'} . " " . $args{'struct'} .
> "</refname>\n";
>      print " <refpurpose>\n";
>      print "  ";
> +    $output_markdown_nopara = 1;
>      output_highlight ($args{'purpose'});
> +    $output_markdown_nopara = 0;
>      print " </refpurpose>\n";
>      print "</refnamediv>\n";
>  
> @@ -1196,9 +1206,11 @@ sub output_struct_xml(%) {
>        ($args{'parameterdescs'}{$parameter_name} ne $undescribed) ||
> next;
>        print "    <varlistentry>";
>        print "      <term>$parameter</term>\n";
> -      print "      <listitem><para>\n";
> +      print "      <listitem>\n";
> +      print "         <para>\n" unless $use_markdown;
>        output_highlight($args{'parameterdescs'}{$parameter_name});
> -      print "      </para></listitem>\n";
> +      print "         </para>\n" unless $use_markdown;
> +      print "      </listitem>\n";
>        print "    </varlistentry>\n";
>      }
>      print "  </variablelist>\n";
> @@ -1237,7 +1249,9 @@ sub output_enum_xml(%) {
>      print " <refname>enum " . $args{'enum'} . "</refname>\n";
>      print " <refpurpose>\n";
>      print "  ";
> +    $output_markdown_nopara = 1;
>      output_highlight ($args{'purpose'});
> +    $output_markdown_nopara = 0;
>      print " </refpurpose>\n";
>      print "</refnamediv>\n";
>  
> @@ -1267,9 +1281,11 @@ sub output_enum_xml(%) {
>  
>        print "    <varlistentry>";
>        print "      <term>$parameter</term>\n";
> -      print "      <listitem><para>\n";
> +      print "      <listitem>\n";
> +      print "         <para>\n" unless $use_markdown;
>        output_highlight($args{'parameterdescs'}{$parameter_name});
> -      print "      </para></listitem>\n";
> +      print "         </para>\n" unless $use_markdown;
> +      print "      </listitem>\n";
>        print "    </varlistentry>\n";
>      }
>      print "  </variablelist>\n";
> @@ -1335,14 +1351,14 @@ sub output_blockhead_xml(%) {
>  	if ($section =~ m/EXAMPLE/i) {
>  	    print "<example><para>\n";
>  	    $output_preformatted = 1;
> -	} else {
> +	} elsif (! $use_markdown) {
>  	    print "<para>\n";
>  	}
>  	output_highlight($args{'sections'}{$section});
>  	$output_preformatted = 0;
>  	if ($section =~ m/EXAMPLE/i) {
>  	    print "</para></example>\n";
> -	} else {
> +	} elsif (! $use_markdown) {
>  	    print "</para>";
>  	}
>  	if (!$args{'content-only'}) {
> @@ -2684,7 +2700,11 @@ sub process_file($) {
>  		{
>  			if ( $1 eq "" )
>  			{
> -				$contents .= $blankline;
> +				if ($use_markdown) {
> +					$contents .= "\n";
> +				} else {
> +					$contents .= $blankline;
> +				}
>  			}
>  			else
>  			{
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

WARNING: multiple messages have this Message-ID (diff)
From: Graham Whaley <graham.whaley@linux.intel.com>
To: Danilo Cesar Lemes de Paula <danilo.cesar@collabora.co.uk>,
	Daniel Vetter <daniel.vetter@ffwll.ch>,
	dri-devel <dri-devel@lists.freedesktop.org>
Cc: Randy Dunlap <rdunlap@infradead.org>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Jonathan Corbet <corbet@lwn.net>,
	Herbert Xu <herbert@gondor.apana.org.au>,
	Stephan Mueller <smueller@chronox.de>,
	Michal Marek <mmarek@suse.cz>,
	linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
	intel-gfx <intel-gfx@lists.freedesktop.org>
Subject: Re: [PATCH] scripts/kernel-doc: Improve Markdown results
Date: Mon, 24 Aug 2015 15:34:40 +0100	[thread overview]
Message-ID: <1440426880.11872.2.camel@linux.intel.com> (raw)
In-Reply-To: <1440185942-31030-1-git-send-email-danilo.cesar@collabora.co.uk>

On Fri, 2015-08-21 at 16:39 -0300, Danilo Cesar Lemes de Paula wrote:
> Using pandoc as the Markdown engine cause some minor side effects as
> pandoc includes  main <para> tags for almost everything.
> Original Markdown support approach removes those main tags, but it
> caused
> some inconsistencies when that tag is not the main one, like:
> <something>..</something>
> <para>...</para>
> 
> As kernel-doc was already including a <para> tag, it causes the
> presence
> of double <para> tags (<para><para>), which is not supported by
> DocBook
> spec.
> 
> Html target gets away with it, so it causes no harm, although other
> targets might not be so lucky (pdf as example).
> 
> We're now delegating the inclusion of the main <para> tag to pandoc
> only, as it knows when it's necessary or not.
> 
> That behavior causes a corner case, the only situation where we're
> certainly that <para> is not needed, which is the <refpurpose>
> content.
> For those cases, we're using a $output_markdown_nopara = 1 control
> var.
> 
> Signed-off-by: Danilo Cesar Lemes de Paula <


Feel free to add my:
Tested-by: Graham Whaley <graham.whaley@linux.intel.com>

 Graham
> danilo.cesar@collabora.co.uk>
> Cc: Randy Dunlap <rdunlap@infradead.org>
> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: Herbert Xu <herbert@gondor.apana.org.au>
> Cc: Stephan Mueller <smueller@chronox.de>
> Cc: Michal Marek <mmarek@suse.cz>
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-doc@vger.kernel.org
> Cc: intel-gfx <intel-gfx@lists.freedesktop.org>
> Cc: dri-devel <dri-devel@lists.freedesktop.org>
> Cc: Graham Whaley <graham.whaley@linux.intel.com>
> ---
>  Thanks to Graham Whaley who helped me to debug this.
> 
>  scripts/kernel-doc | 48 ++++++++++++++++++++++++++++++++++----------
> ----
>  1 file changed, 34 insertions(+), 14 deletions(-)
> 
> diff --git a/scripts/kernel-doc b/scripts/kernel-doc
> index 3850c1e..12a106c 100755
> --- a/scripts/kernel-doc
> +++ b/scripts/kernel-doc
> @@ -288,6 +288,7 @@ my $use_markdown = 0;
>  my $verbose = 0;
>  my $output_mode = "man";
>  my $output_preformatted = 0;
> +my $output_markdown_nopara = 0;
>  my $no_doc_sections = 0;
>  my @highlights = @highlights_man;
>  my $blankline = $blankline_man;
> @@ -529,8 +530,11 @@ sub markdown_to_docbook {
>  	close(CHLD_OUT);
>  	close(CHLD_ERR);
>  
> -	# pandoc insists in adding Main <para></para>, we should
> remove them.
> -	$content =~ s:\A\s*<para>\s*\n(.*)\n</para>\Z$:$1:egsm;
> +	if ($output_markdown_nopara) {
> +		# pandoc insists in adding Main <para></para>,
> sometimes we
> +		# want to remove them.
> +		$content =~
> s:\A\s*<para>\s*\n(.*)\n</para>\Z$:$1:egsm;
> +	}
>  
>  	return $content;
>  }
> @@ -605,7 +609,7 @@ sub output_highlight {
>  	    $line =~ s/^\s*//;
>  	}
>  	if ($line eq ""){
> -	    if (! $output_preformatted) {
> +	    if (! $output_preformatted && ! $use_markdown) {
>  		print $lineprefix, local_unescape($blankline);
>  	    }
>  	} else {
> @@ -1026,7 +1030,7 @@ sub output_section_xml(%) {
>  	    # programlisting is already included by pandoc
>  	    print "<programlisting>\n" unless $use_markdown;
>  	    $output_preformatted = 1;
> -	} else {
> +	} elsif (! $use_markdown) {
>  	    print "<para>\n";
>  	}
>  	output_highlight($args{'sections'}{$section});
> @@ -1034,7 +1038,7 @@ sub output_section_xml(%) {
>  	if ($section =~ m/EXAMPLE/i) {
>  	    print "</programlisting>\n" unless $use_markdown;
>  	    print "</informalexample>\n";
> -	} else {
> +	} elsif (! $use_markdown) {
>  	    print "</para>\n";
>  	}
>  	print "</refsect1>\n";
> @@ -1066,7 +1070,9 @@ sub output_function_xml(%) {
>      print " <refname>" . $args{'function'} . "</refname>\n";
>      print " <refpurpose>\n";
>      print "  ";
> +    $output_markdown_nopara = 1;
>      output_highlight ($args{'purpose'});
> +    $output_markdown_nopara = 0;
>      print " </refpurpose>\n";
>      print "</refnamediv>\n";
>  
> @@ -1104,10 +1110,12 @@ sub output_function_xml(%) {
>  	    $parameter_name =~ s/\[.*//;
>  
>  	    print "  <varlistentry>\n  
>  <term><parameter>$parameter</parameter></term>\n";
> -	    print "   <listitem>\n    <para>\n";
> +	    print "   <listitem>\n";
> +	    print "    <para>\n" unless $use_markdown;
>  	    $lineprefix="     ";
>  	   
>  output_highlight($args{'parameterdescs'}{$parameter_name});
> -	    print "    </para>\n   </listitem>\n 
>  </varlistentry>\n";
> +	    print "    </para>\n" unless $use_markdown;
> +	    print "   </listitem>\n  </varlistentry>\n";
>  	}
>  	print " </variablelist>\n";
>      } else {
> @@ -1143,7 +1151,9 @@ sub output_struct_xml(%) {
>      print " <refname>" . $args{'type'} . " " . $args{'struct'} .
> "</refname>\n";
>      print " <refpurpose>\n";
>      print "  ";
> +    $output_markdown_nopara = 1;
>      output_highlight ($args{'purpose'});
> +    $output_markdown_nopara = 0;
>      print " </refpurpose>\n";
>      print "</refnamediv>\n";
>  
> @@ -1196,9 +1206,11 @@ sub output_struct_xml(%) {
>        ($args{'parameterdescs'}{$parameter_name} ne $undescribed) ||
> next;
>        print "    <varlistentry>";
>        print "      <term>$parameter</term>\n";
> -      print "      <listitem><para>\n";
> +      print "      <listitem>\n";
> +      print "         <para>\n" unless $use_markdown;
>        output_highlight($args{'parameterdescs'}{$parameter_name});
> -      print "      </para></listitem>\n";
> +      print "         </para>\n" unless $use_markdown;
> +      print "      </listitem>\n";
>        print "    </varlistentry>\n";
>      }
>      print "  </variablelist>\n";
> @@ -1237,7 +1249,9 @@ sub output_enum_xml(%) {
>      print " <refname>enum " . $args{'enum'} . "</refname>\n";
>      print " <refpurpose>\n";
>      print "  ";
> +    $output_markdown_nopara = 1;
>      output_highlight ($args{'purpose'});
> +    $output_markdown_nopara = 0;
>      print " </refpurpose>\n";
>      print "</refnamediv>\n";
>  
> @@ -1267,9 +1281,11 @@ sub output_enum_xml(%) {
>  
>        print "    <varlistentry>";
>        print "      <term>$parameter</term>\n";
> -      print "      <listitem><para>\n";
> +      print "      <listitem>\n";
> +      print "         <para>\n" unless $use_markdown;
>        output_highlight($args{'parameterdescs'}{$parameter_name});
> -      print "      </para></listitem>\n";
> +      print "         </para>\n" unless $use_markdown;
> +      print "      </listitem>\n";
>        print "    </varlistentry>\n";
>      }
>      print "  </variablelist>\n";
> @@ -1335,14 +1351,14 @@ sub output_blockhead_xml(%) {
>  	if ($section =~ m/EXAMPLE/i) {
>  	    print "<example><para>\n";
>  	    $output_preformatted = 1;
> -	} else {
> +	} elsif (! $use_markdown) {
>  	    print "<para>\n";
>  	}
>  	output_highlight($args{'sections'}{$section});
>  	$output_preformatted = 0;
>  	if ($section =~ m/EXAMPLE/i) {
>  	    print "</para></example>\n";
> -	} else {
> +	} elsif (! $use_markdown) {
>  	    print "</para>";
>  	}
>  	if (!$args{'content-only'}) {
> @@ -2684,7 +2700,11 @@ sub process_file($) {
>  		{
>  			if ( $1 eq "" )
>  			{
> -				$contents .= $blankline;
> +				if ($use_markdown) {
> +					$contents .= "\n";
> +				} else {
> +					$contents .= $blankline;
> +				}
>  			}
>  			else
>  			{

  reply	other threads:[~2015-08-24 14:34 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-21 19:39 [PATCH] scripts/kernel-doc: Improve Markdown results Danilo Cesar Lemes de Paula
2015-08-21 19:39 ` Danilo Cesar Lemes de Paula
2015-08-24 14:34 ` Graham Whaley [this message]
2015-08-24 14:34   ` Graham Whaley
2015-09-01 17:57 ` Danilo Cesar Lemes de Paula
2015-09-01 17:57   ` Danilo Cesar Lemes de Paula
2015-09-02 14:15   ` Jonathan Corbet
2015-09-04 17:53     ` Danilo Cesar Lemes de Paula
2015-09-04 20:39       ` Jonathan Corbet
2015-09-07 20:06         ` Danilo Cesar Lemes de Paula
2015-09-07 20:06           ` Danilo Cesar Lemes de Paula

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1440426880.11872.2.camel@linux.intel.com \
    --to=graham.whaley@linux.intel.com \
    --cc=corbet@lwn.net \
    --cc=daniel.vetter@ffwll.ch \
    --cc=danilo.cesar@collabora.co.uk \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=herbert@gondor.apana.org.au \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mmarek@suse.cz \
    --cc=rdunlap@infradead.org \
    --cc=smueller@chronox.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.