From: Joe Perches <joe@perches.com>
To: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Cc: linux-mmc@vger.kernel.org, ulf.hansson@linaro.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/2] mmc: sdhci-pxav3: Fix tabbing issue
Date: Tue, 01 Sep 2015 13:31:26 -0700 [thread overview]
Message-ID: <1441139486.12163.3.camel@perches.com> (raw)
In-Reply-To: <1441135454-6902-2-git-send-email-vaibhav.hiremath@linaro.org>
On Wed, 2015-09-02 at 00:54 +0530, Vaibhav Hiremath wrote:
> There were some coding style issues where spaces have been used instead
> of tabs, for example, in macro definitions, alignment of function
> declarations/definitions, etc...
>
> This patch fixes all such occurrences in the code.
> And also use BIT for bit definitions.
Please send 2 patches instead.
> diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
[]
> @@ -128,7 +133,7 @@ static int mv_conf_mbus_windows(struct platform_device *pdev,
> }
>
> static int armada_38x_quirks(struct platform_device *pdev,
> - struct sdhci_host *host)
> + struct sdhci_host *host)
This is not an improvement.
The old code is aligned to the open parenthesis
and is fine.
> @@ -284,10 +288,10 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
> * FE-2946959
> */
> if (pxa->sdio3_conf_reg) {
> - u8 reg_val = readb(pxa->sdio3_conf_reg);
> + u8 reg_val = readb(pxa->sdio3_conf_reg);
>
> if (uhs == MMC_TIMING_UHS_SDR50 ||
> - uhs == MMC_TIMING_UHS_DDR50) {
> + uhs == MMC_TIMING_UHS_DDR50) {
Also not an improvement.
> @@ -304,20 +308,20 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
> }
>
> static const struct sdhci_ops pxav3_sdhci_ops = {
> - .set_clock = sdhci_set_clock,
> - .platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
> - .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> - .set_bus_width = sdhci_set_bus_width,
> - .reset = pxav3_reset,
> - .set_uhs_signaling = pxav3_set_uhs_signaling,
> + .set_clock = sdhci_set_clock,
> + .platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
> + .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> + .set_bus_width = sdhci_set_bus_width,
> + .reset = pxav3_reset,
> + .set_uhs_signaling = pxav3_set_uhs_signaling,
<shrug> If you want.
> };
>
> static struct sdhci_pltfm_data sdhci_pxav3_pdata = {
> - .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
> + .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
Also not an improvement. Why change the space to a tab here?
> @@ -343,7 +347,7 @@ static struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
> return NULL;
>
> if (!of_property_read_u32(np, "mrvl,clk-delay-cycles",
> - &clk_delay_cycles))
> + &clk_delay_cycles))
Not an improvement, etc...
WARNING: multiple messages have this Message-ID (diff)
From: joe@perches.com (Joe Perches)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] mmc: sdhci-pxav3: Fix tabbing issue
Date: Tue, 01 Sep 2015 13:31:26 -0700 [thread overview]
Message-ID: <1441139486.12163.3.camel@perches.com> (raw)
In-Reply-To: <1441135454-6902-2-git-send-email-vaibhav.hiremath@linaro.org>
On Wed, 2015-09-02 at 00:54 +0530, Vaibhav Hiremath wrote:
> There were some coding style issues where spaces have been used instead
> of tabs, for example, in macro definitions, alignment of function
> declarations/definitions, etc...
>
> This patch fixes all such occurrences in the code.
> And also use BIT for bit definitions.
Please send 2 patches instead.
> diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
[]
> @@ -128,7 +133,7 @@ static int mv_conf_mbus_windows(struct platform_device *pdev,
> }
>
> static int armada_38x_quirks(struct platform_device *pdev,
> - struct sdhci_host *host)
> + struct sdhci_host *host)
This is not an improvement.
The old code is aligned to the open parenthesis
and is fine.
> @@ -284,10 +288,10 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
> * FE-2946959
> */
> if (pxa->sdio3_conf_reg) {
> - u8 reg_val = readb(pxa->sdio3_conf_reg);
> + u8 reg_val = readb(pxa->sdio3_conf_reg);
>
> if (uhs == MMC_TIMING_UHS_SDR50 ||
> - uhs == MMC_TIMING_UHS_DDR50) {
> + uhs == MMC_TIMING_UHS_DDR50) {
Also not an improvement.
> @@ -304,20 +308,20 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
> }
>
> static const struct sdhci_ops pxav3_sdhci_ops = {
> - .set_clock = sdhci_set_clock,
> - .platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
> - .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> - .set_bus_width = sdhci_set_bus_width,
> - .reset = pxav3_reset,
> - .set_uhs_signaling = pxav3_set_uhs_signaling,
> + .set_clock = sdhci_set_clock,
> + .platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
> + .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> + .set_bus_width = sdhci_set_bus_width,
> + .reset = pxav3_reset,
> + .set_uhs_signaling = pxav3_set_uhs_signaling,
<shrug> If you want.
> };
>
> static struct sdhci_pltfm_data sdhci_pxav3_pdata = {
> - .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
> + .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
Also not an improvement. Why change the space to a tab here?
> @@ -343,7 +347,7 @@ static struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
> return NULL;
>
> if (!of_property_read_u32(np, "mrvl,clk-delay-cycles",
> - &clk_delay_cycles))
> + &clk_delay_cycles))
Not an improvement, etc...
next prev parent reply other threads:[~2015-09-01 20:31 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-01 19:24 [PATCH 0/2] mmc: sdhci-pxav3: Fix tabbing issue Vaibhav Hiremath
2015-09-01 19:24 ` Vaibhav Hiremath
2015-09-01 19:24 ` [PATCH 1/2] " Vaibhav Hiremath
2015-09-01 19:24 ` Vaibhav Hiremath
2015-09-01 20:31 ` Joe Perches [this message]
2015-09-01 20:31 ` Joe Perches
2015-09-02 6:29 ` Vaibhav Hiremath
2015-09-02 6:29 ` Vaibhav Hiremath
2015-09-02 12:25 ` Vaibhav Hiremath
2015-09-02 12:25 ` Vaibhav Hiremath
2015-09-02 6:54 ` Jisheng Zhang
2015-09-02 6:54 ` Jisheng Zhang
2015-09-02 6:54 ` Jisheng Zhang
2015-09-02 7:39 ` Vaibhav Hiremath
2015-09-02 7:39 ` Vaibhav Hiremath
2015-09-01 19:24 ` [PATCH 2/2] mmc: sdhci-pxav3: Print ret value on error from sdhci_add_host() fn Vaibhav Hiremath
2015-09-01 19:24 ` Vaibhav Hiremath
2015-09-01 20:37 ` Joe Perches
2015-09-01 20:37 ` Joe Perches
2015-09-02 6:37 ` Vaibhav Hiremath
2015-09-02 6:37 ` Vaibhav Hiremath
2015-09-02 13:07 ` Vaibhav Hiremath
2015-09-02 13:07 ` Vaibhav Hiremath
2015-09-02 15:07 ` Joe Perches
2015-09-02 15:07 ` Joe Perches
2015-09-02 15:16 ` Vaibhav Hiremath
2015-09-02 15:16 ` Vaibhav Hiremath
2015-09-15 11:53 ` Ulf Hansson
2015-09-15 11:53 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1441139486.12163.3.camel@perches.com \
--to=joe@perches.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=vaibhav.hiremath@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.