From: libin.yang@intel.com
To: alsa-devel@alsa-project.org, tiwai@suse.de,
intel-gfx@lists.freedesktop.org, daniel.vetter@ffwll.ch,
jani.nikula@linux.intel.com, ville.syrjala@linux.intel.com
Subject: [PATCH v6 2/4] drm/i915: implement sync_audio_rate callback
Date: Wed, 2 Sep 2015 14:11:39 +0800 [thread overview]
Message-ID: <1441174301-144177-2-git-send-email-libin.yang@intel.com> (raw)
In-Reply-To: <1441174301-144177-1-git-send-email-libin.yang@intel.com>
From: Libin Yang <libin.yang@intel.com>
HDMI audio may not work at some frequencies
with the HW provided N/CTS.
This patch sets the proper N value for the
given audio sample rate at the impacted frequencies.
At other frequencies, it will use the N/CTS value
which HW provides.
Signed-off-by: Libin Yang <libin.yang@intel.com>
---
drivers/gpu/drm/i915/i915_dma.c | 1 +
drivers/gpu/drm/i915/i915_drv.h | 5 ++
drivers/gpu/drm/i915/intel_audio.c | 138 +++++++++++++++++++++++++++++++++++++
3 files changed, 144 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 097d4ba..8ffb5dc 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -858,6 +858,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
mutex_init(&dev_priv->sb_lock);
mutex_init(&dev_priv->modeset_restore_lock);
mutex_init(&dev_priv->csr_lock);
+ mutex_init(&dev_priv->av_mutex);
intel_pm_setup(dev);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 05ffd5a..2c6b76f 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1882,6 +1882,11 @@ struct drm_i915_private {
/* hda/i915 audio component */
bool audio_component_registered;
+ /**
+ * av_mutex - mutex for audio/video sync
+ *
+ */
+ struct mutex av_mutex;
uint32_t hw_context_size;
struct list_head context_list;
diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
index dc32cf4..a021720 100644
--- a/drivers/gpu/drm/i915/intel_audio.c
+++ b/drivers/gpu/drm/i915/intel_audio.c
@@ -68,6 +68,31 @@ static const struct {
{ 148500, AUD_CONFIG_PIXEL_CLOCK_HDMI_148500 },
};
+/* HDMI N/CTS table */
+#define TMDS_297M 297000
+#define TMDS_296M DIV_ROUND_UP(297000 * 1000, 1001)
+static const struct {
+ int sample_rate;
+ int clock;
+ int n;
+ int cts;
+} aud_ncts[] = {
+ { 44100, TMDS_296M, 4459, 234375 },
+ { 44100, TMDS_297M, 4704, 247500 },
+ { 48000, TMDS_296M, 5824, 281250 },
+ { 48000, TMDS_297M, 5120, 247500 },
+ { 32000, TMDS_296M, 5824, 421875 },
+ { 32000, TMDS_297M, 3072, 222750 },
+ { 88200, TMDS_296M, 8918, 234375 },
+ { 88200, TMDS_297M, 9408, 247500 },
+ { 96000, TMDS_296M, 11648, 281250 },
+ { 96000, TMDS_297M, 10240, 247500 },
+ { 176400, TMDS_296M, 17836, 234375 },
+ { 176400, TMDS_297M, 18816, 247500 },
+ { 192000, TMDS_296M, 23296, 281250 },
+ { 192000, TMDS_297M, 20480, 247500 },
+};
+
/* get AUD_CONFIG_PIXEL_CLOCK_HDMI_* value for mode */
static u32 audio_config_hdmi_pixel_clock(struct drm_display_mode *mode)
{
@@ -90,6 +115,31 @@ static u32 audio_config_hdmi_pixel_clock(struct drm_display_mode *mode)
return hdmi_audio_clock[i].config;
}
+static int audio_config_get_n(const struct drm_display_mode *mode, int rate)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(aud_ncts); i++) {
+ if ((rate == aud_ncts[i].sample_rate) &&
+ (mode->clock == aud_ncts[i].clock)) {
+ return aud_ncts[i].n;
+ }
+ }
+ return 0;
+}
+
+/* check whether N/CTS/M need be set manually */
+static bool audio_rate_need_prog(struct intel_crtc *crtc,
+ struct drm_display_mode *mode)
+{
+ if (((mode->clock == TMDS_297M) ||
+ (mode->clock == TMDS_296M)) &&
+ intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
+ return true;
+ else
+ return false;
+}
+
static bool intel_eld_uptodate(struct drm_connector *connector,
int reg_eldv, uint32_t bits_eldv,
int reg_elda, uint32_t bits_elda,
@@ -184,6 +234,8 @@ static void hsw_audio_codec_disable(struct intel_encoder *encoder)
DRM_DEBUG_KMS("Disable audio codec on pipe %c\n", pipe_name(pipe));
+ mutex_lock(&dev_priv->av_mutex);
+
/* Disable timestamps */
tmp = I915_READ(HSW_AUD_CFG(pipe));
tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
@@ -199,6 +251,8 @@ static void hsw_audio_codec_disable(struct intel_encoder *encoder)
tmp &= ~AUDIO_ELD_VALID(pipe);
tmp &= ~AUDIO_OUTPUT_ENABLE(pipe);
I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
+
+ mutex_unlock(&dev_priv->av_mutex);
}
static void hsw_audio_codec_enable(struct drm_connector *connector,
@@ -215,6 +269,8 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
DRM_DEBUG_KMS("Enable audio codec on pipe %c, %u bytes ELD\n",
pipe_name(pipe), drm_eld_size(eld));
+ mutex_lock(&dev_priv->av_mutex);
+
/* Enable audio presence detect, invalidate ELD */
tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
tmp |= AUDIO_OUTPUT_ENABLE(pipe);
@@ -253,6 +309,8 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
else
tmp |= audio_config_hdmi_pixel_clock(mode);
I915_WRITE(HSW_AUD_CFG(pipe), tmp);
+
+ mutex_unlock(&dev_priv->av_mutex);
}
static void ilk_audio_codec_disable(struct intel_encoder *encoder)
@@ -514,12 +572,92 @@ static int i915_audio_component_get_cdclk_freq(struct device *dev)
return ret;
}
+static int i915_audio_component_sync_audio_rate(struct device *dev,
+ int port, int rate)
+{
+ struct drm_i915_private *dev_priv = dev_to_i915(dev);
+ struct drm_device *drm_dev = dev_priv->dev;
+ struct intel_encoder *intel_encoder;
+ struct intel_digital_port *intel_dig_port;
+ struct intel_crtc *crtc;
+ struct drm_display_mode *mode;
+ enum pipe pipe = -1;
+ u32 tmp;
+ int n_low, n_up, n;
+
+ /* HSW, BDW SKL need this fix */
+ if (!IS_SKYLAKE(dev_priv) &&
+ !IS_BROADWELL(dev_priv) &&
+ !IS_HASWELL(dev_priv))
+ return 0;
+
+ mutex_lock(&dev_priv->av_mutex);
+ /* 1. get the pipe */
+ for_each_intel_encoder(drm_dev, intel_encoder) {
+ if (intel_encoder->type != INTEL_OUTPUT_HDMI)
+ continue;
+ intel_dig_port = enc_to_dig_port(&intel_encoder->base);
+ if (port == intel_dig_port->port) {
+ crtc = to_intel_crtc(intel_encoder->base.crtc);
+ if (!crtc) {
+ DRM_DEBUG_KMS("%s: crtc is NULL\n", __func__);
+ continue;
+ }
+ pipe = crtc->pipe;
+ break;
+ }
+ }
+
+ if (pipe == INVALID_PIPE) {
+ DRM_DEBUG_KMS("no pipe for the port %c\n", port_name(port));
+ mutex_unlock(&dev_priv->av_mutex);
+ return -ENODEV;
+ }
+ DRM_DEBUG_KMS("pipe %c connects port %c\n",
+ pipe_name(pipe), port_name(port));
+ mode = &crtc->config->base.adjusted_mode;
+
+ /* 2. check whether to set the N/CTS/M manually or not */
+ if (!audio_rate_need_prog(crtc, mode)) {
+ tmp = I915_READ(HSW_AUD_CFG(pipe));
+ tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
+ I915_WRITE(HSW_AUD_CFG(pipe), tmp);
+ mutex_unlock(&dev_priv->av_mutex);
+ return 0;
+ }
+
+ n = audio_config_get_n(mode, rate);
+ if (n == 0) {
+ DRM_DEBUG_KMS("Using automatic mode for N value on port %c\n",
+ port_name(port));
+ tmp = I915_READ(HSW_AUD_CFG(pipe));
+ tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
+ I915_WRITE(HSW_AUD_CFG(pipe), tmp);
+ mutex_unlock(&dev_priv->av_mutex);
+ return 0;
+ }
+ n_low = n & 0xfff;
+ n_up = (n >> 12) & 0xff;
+
+ /* 4. set the N/CTS/M */
+ tmp = I915_READ(HSW_AUD_CFG(pipe));
+ tmp &= ~(AUD_CONFIG_UPPER_N_MASK | AUD_CONFIG_LOWER_N_MASK);
+ tmp |= ((n_up << AUD_CONFIG_UPPER_N_SHIFT) |
+ (n_low << AUD_CONFIG_LOWER_N_SHIFT) |
+ AUD_CONFIG_N_PROG_ENABLE);
+ I915_WRITE(HSW_AUD_CFG(pipe), tmp);
+
+ mutex_unlock(&dev_priv->av_mutex);
+ return 0;
+}
+
static const struct i915_audio_component_ops i915_audio_component_ops = {
.owner = THIS_MODULE,
.get_power = i915_audio_component_get_power,
.put_power = i915_audio_component_put_power,
.codec_wake_override = i915_audio_component_codec_wake_override,
.get_cdclk_freq = i915_audio_component_get_cdclk_freq,
+ .sync_audio_rate = i915_audio_component_sync_audio_rate,
};
static int i915_audio_component_bind(struct device *i915_dev,
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-09-02 6:11 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-02 6:11 [PATCH v6 1/4] drm/i915: Add audio sync_audio_rate callback libin.yang
2015-09-02 6:11 ` libin.yang [this message]
2015-09-02 7:52 ` [PATCH v6 2/4] drm/i915: implement " Jani Nikula
2015-09-02 8:24 ` Yang, Libin
2015-09-02 8:42 ` Jani Nikula
2015-09-02 8:47 ` Yang, Libin
2015-09-02 6:11 ` [PATCH v6 3/4] ALSA: hda - display audio call " libin.yang
2015-09-02 6:11 ` [PATCH v6 4/4] drm/i915: set proper N/CTS in modeset libin.yang
2015-09-02 8:20 ` Jani Nikula
2015-09-02 8:42 ` Yang, Libin
2015-09-02 9:02 ` Jani Nikula
2015-09-02 13:34 ` Takashi Iwai
2015-09-02 13:44 ` Jani Nikula
2015-09-02 13:46 ` Takashi Iwai
2015-09-02 15:22 ` Daniel Vetter
2015-09-02 15:36 ` Takashi Iwai
2015-09-04 1:56 ` Yang, Libin
2015-09-04 4:50 ` Takashi Iwai
2015-10-19 8:25 ` Jani Nikula
2015-10-19 8:27 ` Takashi Iwai
2015-09-02 7:23 ` [PATCH v6 1/4] drm/i915: Add audio sync_audio_rate callback Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1441174301-144177-2-git-send-email-libin.yang@intel.com \
--to=libin.yang@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=daniel.vetter@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@linux.intel.com \
--cc=tiwai@suse.de \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.