From: Kishon Vijay Abraham I <kishon@ti.com>
To: tony@atomide.com, broonie@kernel.org, devicetree@vger.kernel.org,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
nsekhar@ti.com
Cc: ulf.hansson@linaro.org, robh+dt@kernel.org, pawel.moll@arm.com,
mark.rutland@arm.com, ijc+devicetree@hellion.org.uk,
galak@codeaurora.org, bcousson@baylibre.com,
linux@arm.linux.org.uk, lgirdwood@gmail.com,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
kishon@ti.com
Subject: [PATCH 0/6] Fix pbias regulator enable
Date: Wed, 2 Sep 2015 16:17:27 +0530 [thread overview]
Message-ID: <1441190853-7133-1-git-send-email-kishon@ti.com> (raw)
vsel_reg and enable_reg of the pbias regulator descriptor should actually
have the offset from syscon.
However after
"ARM: dts: <platform>: add minimal l4 bus layout with control module
support"
vsel_reg and enable_reg started to have the absolute address because
of address translation that happens due to pbias node made as the
child node of syscon. This breaks the pbias regulator enable.
This series adds the 'offset' to be populated in vsel_reg and enable_reg
in the pbias driver itself.
Tested these patches against mmc -next in omap4 panda, omap3 beagle xm,
dra72 and omap5 uevm
Kishon Vijay Abraham I (6):
regulator: pbias: program pbias register offset in pbias driver
ARM: dts: dra7: use "ti,pbias-dra7" compatible string for pbias
ARM: dts: omap243x: use "ti,pbias-omap2" compatible string for pbias
ARM: dts: omap3: use "ti,pbias-omap3" compatible string for pbias
ARM: dts: OMAP4: use "ti,pbias-omap4" compatible string for pbias
ARM: dts: OMAP5: use "ti,pbias-omap5" compatible string for pbias
.../bindings/regulator/pbias-regulator.txt | 7 ++-
arch/arm/boot/dts/dra7.dtsi | 2 +-
arch/arm/boot/dts/omap2430.dtsi | 2 +-
arch/arm/boot/dts/omap3.dtsi | 2 +-
arch/arm/boot/dts/omap4.dtsi | 2 +-
arch/arm/boot/dts/omap5.dtsi | 2 +-
drivers/regulator/pbias-regulator.c | 52 +++++++++++++++++---
7 files changed, 57 insertions(+), 12 deletions(-)
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: kishon@ti.com (Kishon Vijay Abraham I)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/6] Fix pbias regulator enable
Date: Wed, 2 Sep 2015 16:17:27 +0530 [thread overview]
Message-ID: <1441190853-7133-1-git-send-email-kishon@ti.com> (raw)
vsel_reg and enable_reg of the pbias regulator descriptor should actually
have the offset from syscon.
However after
"ARM: dts: <platform>: add minimal l4 bus layout with control module
support"
vsel_reg and enable_reg started to have the absolute address because
of address translation that happens due to pbias node made as the
child node of syscon. This breaks the pbias regulator enable.
This series adds the 'offset' to be populated in vsel_reg and enable_reg
in the pbias driver itself.
Tested these patches against mmc -next in omap4 panda, omap3 beagle xm,
dra72 and omap5 uevm
Kishon Vijay Abraham I (6):
regulator: pbias: program pbias register offset in pbias driver
ARM: dts: dra7: use "ti,pbias-dra7" compatible string for pbias
ARM: dts: omap243x: use "ti,pbias-omap2" compatible string for pbias
ARM: dts: omap3: use "ti,pbias-omap3" compatible string for pbias
ARM: dts: OMAP4: use "ti,pbias-omap4" compatible string for pbias
ARM: dts: OMAP5: use "ti,pbias-omap5" compatible string for pbias
.../bindings/regulator/pbias-regulator.txt | 7 ++-
arch/arm/boot/dts/dra7.dtsi | 2 +-
arch/arm/boot/dts/omap2430.dtsi | 2 +-
arch/arm/boot/dts/omap3.dtsi | 2 +-
arch/arm/boot/dts/omap4.dtsi | 2 +-
arch/arm/boot/dts/omap5.dtsi | 2 +-
drivers/regulator/pbias-regulator.c | 52 +++++++++++++++++---
7 files changed, 57 insertions(+), 12 deletions(-)
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: <tony@atomide.com>, <broonie@kernel.org>,
<devicetree@vger.kernel.org>, <linux-mmc@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <nsekhar@ti.com>
Cc: <ulf.hansson@linaro.org>, <robh+dt@kernel.org>,
<pawel.moll@arm.com>, <mark.rutland@arm.com>,
<ijc+devicetree@hellion.org.uk>, <galak@codeaurora.org>,
<bcousson@baylibre.com>, <linux@arm.linux.org.uk>,
<lgirdwood@gmail.com>, <linux-omap@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <kishon@ti.com>
Subject: [PATCH 0/6] Fix pbias regulator enable
Date: Wed, 2 Sep 2015 16:17:27 +0530 [thread overview]
Message-ID: <1441190853-7133-1-git-send-email-kishon@ti.com> (raw)
vsel_reg and enable_reg of the pbias regulator descriptor should actually
have the offset from syscon.
However after
"ARM: dts: <platform>: add minimal l4 bus layout with control module
support"
vsel_reg and enable_reg started to have the absolute address because
of address translation that happens due to pbias node made as the
child node of syscon. This breaks the pbias regulator enable.
This series adds the 'offset' to be populated in vsel_reg and enable_reg
in the pbias driver itself.
Tested these patches against mmc -next in omap4 panda, omap3 beagle xm,
dra72 and omap5 uevm
Kishon Vijay Abraham I (6):
regulator: pbias: program pbias register offset in pbias driver
ARM: dts: dra7: use "ti,pbias-dra7" compatible string for pbias
ARM: dts: omap243x: use "ti,pbias-omap2" compatible string for pbias
ARM: dts: omap3: use "ti,pbias-omap3" compatible string for pbias
ARM: dts: OMAP4: use "ti,pbias-omap4" compatible string for pbias
ARM: dts: OMAP5: use "ti,pbias-omap5" compatible string for pbias
.../bindings/regulator/pbias-regulator.txt | 7 ++-
arch/arm/boot/dts/dra7.dtsi | 2 +-
arch/arm/boot/dts/omap2430.dtsi | 2 +-
arch/arm/boot/dts/omap3.dtsi | 2 +-
arch/arm/boot/dts/omap4.dtsi | 2 +-
arch/arm/boot/dts/omap5.dtsi | 2 +-
drivers/regulator/pbias-regulator.c | 52 +++++++++++++++++---
7 files changed, 57 insertions(+), 12 deletions(-)
--
1.7.9.5
next reply other threads:[~2015-09-02 10:48 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-02 10:47 Kishon Vijay Abraham I [this message]
2015-09-02 10:47 ` [PATCH 0/6] Fix pbias regulator enable Kishon Vijay Abraham I
2015-09-02 10:47 ` Kishon Vijay Abraham I
2015-09-02 10:47 ` [PATCH 1/6] regulator: pbias: program pbias register offset in pbias driver Kishon Vijay Abraham I
2015-09-02 10:47 ` Kishon Vijay Abraham I
2015-09-02 10:47 ` Kishon Vijay Abraham I
[not found] ` <1441190853-7133-2-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2015-09-02 15:30 ` Tony Lindgren
2015-09-02 15:30 ` Tony Lindgren
2015-09-02 15:30 ` Tony Lindgren
2015-09-02 18:06 ` Mark Brown
2015-09-02 18:06 ` Mark Brown
2015-09-02 18:06 ` Mark Brown
2015-09-02 10:47 ` [PATCH 2/6] ARM: dts: dra7: use "ti,pbias-dra7" compatible string for pbias Kishon Vijay Abraham I
2015-09-02 10:47 ` Kishon Vijay Abraham I
2015-09-02 10:47 ` [PATCH 2/6] ARM: dts: dra7: use "ti, pbias-dra7" " Kishon Vijay Abraham I
2015-09-02 10:47 ` [PATCH 3/6] ARM: dts: omap243x: use "ti, pbias-omap2" " Kishon Vijay Abraham I
2015-09-02 10:47 ` [PATCH 3/6] ARM: dts: omap243x: use "ti,pbias-omap2" " Kishon Vijay Abraham I
2015-09-02 10:47 ` [PATCH 3/6] ARM: dts: omap243x: use "ti, pbias-omap2" " Kishon Vijay Abraham I
[not found] ` <1441190853-7133-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2015-09-02 10:47 ` [PATCH 4/6] ARM: dts: omap3: use "ti,pbias-omap3" " Kishon Vijay Abraham I
2015-09-02 10:47 ` Kishon Vijay Abraham I
2015-09-02 10:47 ` [PATCH 4/6] ARM: dts: omap3: use "ti, pbias-omap3" " Kishon Vijay Abraham I
2015-09-02 10:47 ` [PATCH 5/6] ARM: dts: OMAP4: use "ti, pbias-omap4" " Kishon Vijay Abraham I
2015-09-02 10:47 ` [PATCH 5/6] ARM: dts: OMAP4: use "ti,pbias-omap4" " Kishon Vijay Abraham I
2015-09-02 10:47 ` [PATCH 5/6] ARM: dts: OMAP4: use "ti, pbias-omap4" " Kishon Vijay Abraham I
2015-09-02 10:47 ` [PATCH 6/6] ARM: dts: OMAP5: use "ti,pbias-omap5" " Kishon Vijay Abraham I
2015-09-02 10:47 ` Kishon Vijay Abraham I
2015-09-02 10:47 ` [PATCH 6/6] ARM: dts: OMAP5: use "ti, pbias-omap5" " Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1441190853-7133-1-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=bcousson@baylibre.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=nsekhar@ti.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.