From: rjui@broadcom.com (Ray Jui)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 8/9] ARM: dts: Enable NAND support on bcm911360_entphn
Date: Fri, 18 Sep 2015 14:24:13 -0700 [thread overview]
Message-ID: <1442611454-16331-9-git-send-email-rjui@broadcom.com> (raw)
In-Reply-To: <1442611454-16331-1-git-send-email-rjui@broadcom.com>
This patch enables NAND support on Broadcom Cygnus form factor board
(bcm911360_entphn)
Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
---
arch/arm/boot/dts/bcm911360_entphn.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index f791a3b..8b3800f 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -60,3 +60,19 @@
&uart3 {
status = "okay";
};
+
+&nand {
+ nandcs at 1 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
+
+ brcm,nand-oob-sector-size = <27>;
+ };
+};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Ray Jui <rjui@broadcom.com>
To: Florian Fainelli <f.fainelli@gmail.com>,
Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
bcm-kernel-feedback-list@broadcom.com,
devicetree@vger.kernel.org, Ray Jui <rjui@broadcom.com>
Subject: [PATCH v2 8/9] ARM: dts: Enable NAND support on bcm911360_entphn
Date: Fri, 18 Sep 2015 14:24:13 -0700 [thread overview]
Message-ID: <1442611454-16331-9-git-send-email-rjui@broadcom.com> (raw)
In-Reply-To: <1442611454-16331-1-git-send-email-rjui@broadcom.com>
This patch enables NAND support on Broadcom Cygnus form factor board
(bcm911360_entphn)
Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
---
arch/arm/boot/dts/bcm911360_entphn.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index f791a3b..8b3800f 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -60,3 +60,19 @@
&uart3 {
status = "okay";
};
+
+&nand {
+ nandcs@1 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
+
+ brcm,nand-oob-sector-size = <27>;
+ };
+};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Ray Jui <rjui@broadcom.com>
To: Florian Fainelli <f.fainelli@gmail.com>,
Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<bcm-kernel-feedback-list@broadcom.com>,
<devicetree@vger.kernel.org>, "Ray Jui" <rjui@broadcom.com>
Subject: [PATCH v2 8/9] ARM: dts: Enable NAND support on bcm911360_entphn
Date: Fri, 18 Sep 2015 14:24:13 -0700 [thread overview]
Message-ID: <1442611454-16331-9-git-send-email-rjui@broadcom.com> (raw)
In-Reply-To: <1442611454-16331-1-git-send-email-rjui@broadcom.com>
This patch enables NAND support on Broadcom Cygnus form factor board
(bcm911360_entphn)
Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
---
arch/arm/boot/dts/bcm911360_entphn.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index f791a3b..8b3800f 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -60,3 +60,19 @@
&uart3 {
status = "okay";
};
+
+&nand {
+ nandcs@1 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
+
+ brcm,nand-oob-sector-size = <27>;
+ };
+};
--
1.9.1
next prev parent reply other threads:[~2015-09-18 21:24 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-18 21:24 [PATCH v2 0/9] Broadcom Cygnus device tree changes Ray Jui
2015-09-18 21:24 ` Ray Jui
2015-09-18 21:24 ` Ray Jui
2015-09-18 21:24 ` [PATCH v2 1/9] ARM: dts: consolidate aliases for Cygnus dt files Ray Jui
2015-09-18 21:24 ` Ray Jui
2015-09-18 21:24 ` Ray Jui
2015-09-18 21:27 ` Arnd Bergmann
2015-09-18 21:27 ` Arnd Bergmann
2015-09-18 21:27 ` Arnd Bergmann
2015-09-18 21:44 ` Ray Jui
2015-09-18 21:44 ` Ray Jui
2015-09-18 21:44 ` Ray Jui
2015-09-23 21:31 ` Arnd Bergmann
2015-09-23 21:31 ` Arnd Bergmann
2015-09-23 21:31 ` Arnd Bergmann
2015-09-23 21:46 ` Ray Jui
2015-09-23 21:46 ` Ray Jui
2015-09-23 21:46 ` Ray Jui
2015-09-23 21:48 ` Florian Fainelli
2015-09-23 21:48 ` Florian Fainelli
2015-09-23 21:48 ` Florian Fainelli
2015-09-24 22:23 ` Ray Jui
2015-09-24 22:23 ` Ray Jui
2015-09-24 22:23 ` Ray Jui
2015-09-18 21:24 ` [PATCH v2 2/9] ARM: dts: Use label for device nodes in Cygnus dts Ray Jui
2015-09-18 21:24 ` Ray Jui
2015-09-18 21:24 ` Ray Jui
2015-09-18 21:24 ` [PATCH v2 3/9] ARM: dts: Remove unused PCI I/O resource in Cygnus Ray Jui
2015-09-18 21:24 ` Ray Jui
2015-09-18 21:24 ` Ray Jui
2015-09-18 21:28 ` Arnd Bergmann
2015-09-18 21:28 ` Arnd Bergmann
2015-09-18 21:53 ` Ray Jui
2015-09-18 21:53 ` Ray Jui
2015-09-18 21:53 ` Ray Jui
2015-09-18 21:24 ` [PATCH v2 4/9] ARM: dts: Put Cygnus core components under core bus Ray Jui
2015-09-18 21:24 ` Ray Jui
2015-09-18 21:24 ` Ray Jui
2015-09-18 21:30 ` Arnd Bergmann
2015-09-18 21:30 ` Arnd Bergmann
2015-09-18 21:30 ` Arnd Bergmann
2015-09-18 21:57 ` Ray Jui
2015-09-18 21:57 ` Ray Jui
2015-09-18 21:57 ` Ray Jui
2015-09-18 21:24 ` [PATCH v2 5/9] ARM: dts: Move all Cygnus peripherals into soc bus Ray Jui
2015-09-18 21:24 ` Ray Jui
2015-09-18 21:24 ` Ray Jui
2015-09-18 21:34 ` Arnd Bergmann
2015-09-18 21:34 ` Arnd Bergmann
2015-09-18 21:34 ` Arnd Bergmann
2015-09-18 22:11 ` Ray Jui
2015-09-18 22:11 ` Ray Jui
2015-09-18 22:11 ` Ray Jui
2015-09-23 21:29 ` Arnd Bergmann
2015-09-23 21:29 ` Arnd Bergmann
2015-09-23 21:55 ` Ray Jui
2015-09-23 21:55 ` Ray Jui
2015-09-23 21:55 ` Ray Jui
2015-09-24 5:54 ` Ray Jui
2015-09-24 5:54 ` Ray Jui
2015-09-24 5:54 ` Ray Jui
2015-09-18 21:24 ` [PATCH v2 6/9] ARM: dts: Reorder Cygnus peripherals Ray Jui
2015-09-18 21:24 ` Ray Jui
2015-09-18 21:24 ` Ray Jui
2015-09-18 21:24 ` [PATCH v2 7/9] ARM: dts: Enable various peripherals on bcm958305k Ray Jui
2015-09-18 21:24 ` Ray Jui
2015-09-18 21:24 ` Ray Jui
2015-09-18 21:24 ` Ray Jui [this message]
2015-09-18 21:24 ` [PATCH v2 8/9] ARM: dts: Enable NAND support on bcm911360_entphn Ray Jui
2015-09-18 21:24 ` Ray Jui
2015-09-18 21:24 ` [PATCH v2 9/9] ARM: dts: enable touchscreen support on Cygnus Ray Jui
2015-09-18 21:24 ` Ray Jui
2015-09-18 21:24 ` Ray Jui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442611454-16331-9-git-send-email-rjui@broadcom.com \
--to=rjui@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.