From: codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org
Cc: lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
be17068-p0aYb1w59bq9tCD/VL7h6Q@public.gmane.org,
Marcus Cooper
<codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v2 1/4] dt-bindings: add sunxi SPDIF transceiver bindings
Date: Wed, 30 Sep 2015 19:50:55 +0200 [thread overview]
Message-ID: <1443635458-8873-2-git-send-email-codekipper@gmail.com> (raw)
In-Reply-To: <1443635458-8873-1-git-send-email-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Add devicetree bindings for the SPDIF transceiver found on
found on Allwinners A10, A20 and A31 SoCs.
Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
.../devicetree/bindings/sound/sunxi,spdif.txt | 49 ++++++++++++++++++++++
1 file changed, 49 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/sunxi,spdif.txt
diff --git a/Documentation/devicetree/bindings/sound/sunxi,spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,spdif.txt
new file mode 100644
index 0000000..1868722
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sunxi,spdif.txt
@@ -0,0 +1,49 @@
+Allwinner Sony/Philips Digital Interface Format (S/PDIF) Controller
+
+The Allwinner S/PDIF audio block is a transceiver that allows the
+processor to receive and transmit digital audio via an coaxial cable or
+a fibre cable.
+
+Required properties:
+
+ - compatible : should be one of the following:
+ - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
+ - "allwinner,sun7i-a20-spdif": for the Allwinner A20 SoC
+ - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
+
+ - reg : Offset and length of the register set for the device.
+
+ - interrupts : Contains the spdif interrupt.
+
+ - dmas : Generic dma devicetree binding as described in
+ Documentation/devicetree/bindings/dma/dma.txt.
+
+ - dma-names : Two dmas have to be defined, "tx" and "rx".
+
+ - clocks : Contains an entry for each entry in clock-names.
+
+ - clock-names : Includes the following entries:
+ "apb" clock for the spdif bus.
+ "audio" clock from the audio pll.
+ "spdif" clock for spdif controller.
+
+Optional:
+
+ - spdif-in : Enable block for capturing an SPDIF signal.
+
+ - spdif-out : Enable block for transmitting an SPDIF signal.
+
+Example:
+
+spdif: spdif@01c21000 {
+ compatible = "allwinner,sun4i-a10-spdif";
+ reg = <0x01c21000 0x40>;
+ interrupts = <13>;
+ clocks = <&apb0_gates 1>, <&pll2 0>, <&spdif_clk>;
+ clock-names = "apb", "audio", "spdif";
+ dmas = <&dma 0 2>, <&dma 0 2>;
+ dma-names = "rx", "tx";
+ spdif-in = "disabled";
+ spdif-out = "okay";
+ status = "okay";
+};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: codekipper@gmail.com (codekipper at gmail.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/4] dt-bindings: add sunxi SPDIF transceiver bindings
Date: Wed, 30 Sep 2015 19:50:55 +0200 [thread overview]
Message-ID: <1443635458-8873-2-git-send-email-codekipper@gmail.com> (raw)
In-Reply-To: <1443635458-8873-1-git-send-email-codekipper@gmail.com>
From: Marcus Cooper <codekipper@gmail.com>
Add devicetree bindings for the SPDIF transceiver found on
found on Allwinners A10, A20 and A31 SoCs.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
.../devicetree/bindings/sound/sunxi,spdif.txt | 49 ++++++++++++++++++++++
1 file changed, 49 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/sunxi,spdif.txt
diff --git a/Documentation/devicetree/bindings/sound/sunxi,spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,spdif.txt
new file mode 100644
index 0000000..1868722
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sunxi,spdif.txt
@@ -0,0 +1,49 @@
+Allwinner Sony/Philips Digital Interface Format (S/PDIF) Controller
+
+The Allwinner S/PDIF audio block is a transceiver that allows the
+processor to receive and transmit digital audio via an coaxial cable or
+a fibre cable.
+
+Required properties:
+
+ - compatible : should be one of the following:
+ - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
+ - "allwinner,sun7i-a20-spdif": for the Allwinner A20 SoC
+ - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
+
+ - reg : Offset and length of the register set for the device.
+
+ - interrupts : Contains the spdif interrupt.
+
+ - dmas : Generic dma devicetree binding as described in
+ Documentation/devicetree/bindings/dma/dma.txt.
+
+ - dma-names : Two dmas have to be defined, "tx" and "rx".
+
+ - clocks : Contains an entry for each entry in clock-names.
+
+ - clock-names : Includes the following entries:
+ "apb" clock for the spdif bus.
+ "audio" clock from the audio pll.
+ "spdif" clock for spdif controller.
+
+Optional:
+
+ - spdif-in : Enable block for capturing an SPDIF signal.
+
+ - spdif-out : Enable block for transmitting an SPDIF signal.
+
+Example:
+
+spdif: spdif at 01c21000 {
+ compatible = "allwinner,sun4i-a10-spdif";
+ reg = <0x01c21000 0x40>;
+ interrupts = <13>;
+ clocks = <&apb0_gates 1>, <&pll2 0>, <&spdif_clk>;
+ clock-names = "apb", "audio", "spdif";
+ dmas = <&dma 0 2>, <&dma 0 2>;
+ dma-names = "rx", "tx";
+ spdif-in = "disabled";
+ spdif-out = "okay";
+ status = "okay";
+};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: codekipper@gmail.com
To: maxime.ripard@free-electrons.com
Cc: lgirdwood@gmail.com, linux-arm-kernel@lists.infradead.org,
broonie@kernel.org, linux-sunxi@googlegroups.com,
linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org,
be17068@iperbole.bo.it, Marcus Cooper <codekipper@gmail.com>
Subject: [PATCH v2 1/4] dt-bindings: add sunxi SPDIF transceiver bindings
Date: Wed, 30 Sep 2015 19:50:55 +0200 [thread overview]
Message-ID: <1443635458-8873-2-git-send-email-codekipper@gmail.com> (raw)
In-Reply-To: <1443635458-8873-1-git-send-email-codekipper@gmail.com>
From: Marcus Cooper <codekipper@gmail.com>
Add devicetree bindings for the SPDIF transceiver found on
found on Allwinners A10, A20 and A31 SoCs.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
.../devicetree/bindings/sound/sunxi,spdif.txt | 49 ++++++++++++++++++++++
1 file changed, 49 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/sunxi,spdif.txt
diff --git a/Documentation/devicetree/bindings/sound/sunxi,spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,spdif.txt
new file mode 100644
index 0000000..1868722
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sunxi,spdif.txt
@@ -0,0 +1,49 @@
+Allwinner Sony/Philips Digital Interface Format (S/PDIF) Controller
+
+The Allwinner S/PDIF audio block is a transceiver that allows the
+processor to receive and transmit digital audio via an coaxial cable or
+a fibre cable.
+
+Required properties:
+
+ - compatible : should be one of the following:
+ - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
+ - "allwinner,sun7i-a20-spdif": for the Allwinner A20 SoC
+ - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
+
+ - reg : Offset and length of the register set for the device.
+
+ - interrupts : Contains the spdif interrupt.
+
+ - dmas : Generic dma devicetree binding as described in
+ Documentation/devicetree/bindings/dma/dma.txt.
+
+ - dma-names : Two dmas have to be defined, "tx" and "rx".
+
+ - clocks : Contains an entry for each entry in clock-names.
+
+ - clock-names : Includes the following entries:
+ "apb" clock for the spdif bus.
+ "audio" clock from the audio pll.
+ "spdif" clock for spdif controller.
+
+Optional:
+
+ - spdif-in : Enable block for capturing an SPDIF signal.
+
+ - spdif-out : Enable block for transmitting an SPDIF signal.
+
+Example:
+
+spdif: spdif@01c21000 {
+ compatible = "allwinner,sun4i-a10-spdif";
+ reg = <0x01c21000 0x40>;
+ interrupts = <13>;
+ clocks = <&apb0_gates 1>, <&pll2 0>, <&spdif_clk>;
+ clock-names = "apb", "audio", "spdif";
+ dmas = <&dma 0 2>, <&dma 0 2>;
+ dma-names = "rx", "tx";
+ spdif-in = "disabled";
+ spdif-out = "okay";
+ status = "okay";
+};
--
1.9.1
next prev parent reply other threads:[~2015-09-30 17:50 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-30 17:50 [PATCH v2 0/4] Add SPDIF support for Allwinner SoCs codekipper-Re5JQEeQqe8AvxtiuMwx3w
2015-09-30 17:50 ` codekipper
2015-09-30 17:50 ` codekipper at gmail.com
[not found] ` <1443635458-8873-1-git-send-email-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-09-30 17:50 ` codekipper-Re5JQEeQqe8AvxtiuMwx3w [this message]
2015-09-30 17:50 ` [PATCH v2 1/4] dt-bindings: add sunxi SPDIF transceiver bindings codekipper
2015-09-30 17:50 ` codekipper at gmail.com
[not found] ` <1443635458-8873-2-git-send-email-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-10-01 20:12 ` Maxime Ripard
2015-10-01 20:12 ` Maxime Ripard
2015-10-01 20:12 ` Maxime Ripard
2015-10-02 5:24 ` Code Kipper
2015-10-02 5:24 ` Code Kipper
2015-10-02 5:24 ` Code Kipper
[not found] ` <CAEKpxB=kdmrbeiq8M=dXmpccxOhd7UZTaMkLZGo9TdRB1kMz3g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-10-05 8:41 ` Maxime Ripard
2015-10-05 8:41 ` Maxime Ripard
2015-10-05 8:41 ` Maxime Ripard
2015-10-05 10:40 ` Code Kipper
2015-10-05 10:40 ` Code Kipper
2015-10-05 10:40 ` Code Kipper
2015-09-30 17:50 ` [PATCH v2 2/4] dt-binding: Add sunxi S/PDIF machine driver codekipper-Re5JQEeQqe8AvxtiuMwx3w
2015-09-30 17:50 ` codekipper
2015-09-30 17:50 ` codekipper at gmail.com
2015-09-30 17:50 ` [PATCH v2 3/4] ASoC: sunxi: Add " codekipper-Re5JQEeQqe8AvxtiuMwx3w
2015-09-30 17:50 ` codekipper
2015-09-30 17:50 ` codekipper at gmail.com
2015-09-30 17:50 ` [PATCH v2 4/4] ASOC: sunxi: Add support for the spdif block codekipper-Re5JQEeQqe8AvxtiuMwx3w
2015-09-30 17:50 ` codekipper
2015-09-30 17:50 ` codekipper at gmail.com
2015-09-30 18:26 ` [PATCH] ASOC: sunxi: fix platform_no_drv_owner.cocci warnings kbuild test robot
2015-09-30 18:26 ` kbuild test robot
2015-09-30 18:26 ` kbuild test robot
2015-09-30 18:26 ` [PATCH v2 4/4] ASOC: sunxi: Add support for the spdif block kbuild test robot
2015-09-30 18:26 ` kbuild test robot
2015-09-30 18:26 ` kbuild test robot
2015-09-30 18:52 ` [RFC PATCH] ASOC: sunxi: sun4i_snd_txctrl_on() can be static kbuild test robot
2015-09-30 18:52 ` kbuild test robot
2015-09-30 18:52 ` kbuild test robot
[not found] ` <1443635458-8873-5-git-send-email-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-09-30 18:52 ` [PATCH v2 4/4] ASOC: sunxi: Add support for the spdif block kbuild test robot
2015-09-30 18:52 ` kbuild test robot
2015-09-30 18:52 ` kbuild test robot
2015-10-01 20:11 ` Maxime Ripard
2015-10-01 20:11 ` Maxime Ripard
2015-10-01 20:11 ` Maxime Ripard
2015-10-02 6:44 ` Code Kipper
2015-10-02 6:44 ` Code Kipper
2015-10-02 6:44 ` Code Kipper
[not found] ` <CAEKpxB=_coi06gaixgqpLm=AFbw2mPVLPim7HCk-T-Lnsgt6mw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-10-06 9:00 ` Maxime Ripard
2015-10-06 9:00 ` Maxime Ripard
2015-10-06 9:00 ` Maxime Ripard
2015-10-06 10:38 ` Code Kipper
2015-10-06 10:38 ` Code Kipper
2015-10-06 10:38 ` Code Kipper
[not found] ` <CAEKpxB=UZMe1=A7wguiyPn=YhuUaj8B8Ajc0nADVFcHEWQgvvw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-10-26 19:20 ` Maxime Ripard
2015-10-26 19:20 ` Maxime Ripard
2015-10-26 19:20 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443635458-8873-2-git-send-email-codekipper@gmail.com \
--to=codekipper-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
--cc=be17068-p0aYb1w59bq9tCD/VL7h6Q@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.